JULONG EDUCATIONAL TECHNOLOGY TB3124RDV WIRELESS TABLET User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1291827
Application ID	KM9UjajwVWaZQlJXV2escg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.64kB (1532954 bits)
Date Submitted	2010-06-07 00:00:00
Date Available	2010-06-07 00:00:00
Creation Date	2010-04-27 14:54:51
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-04-27 14:57:12
Document Title	Microsoft Word - 用户手册En.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	User

Important Note
Keep the IPBOARD（JL-）Tablet (TB3124RDV(T/8)) away from the equipment with strong magnetic
filed!
Keep out of direct sunlight.
Important Note
Only can be written on or controlled with Julong’s specialized electronic pens.
Make sure IPBOARD（JL-） Tablet（TB3124RDV(T/8)）is properly connected to the transceiver, and
the driver is correctly installed.
General Note
IPBOARD（JL-） Tablet（TB3124RDV(T/8)） should be charged for about 2.5 hours before first-use.
Please charge it when in low battery. IPBOARD（JL-）Tablet（TB3124RDV(T/8)） can keep normal
operation continuously for about 10 hours (The charger indicator is red while charging, and it turns
green after full charged.)
Do not scratch the surface or frame of the tablet with sharp or hard objects.
Content
Important Note..........................................................................................................................................1
Content......................................................................................................................................................2
Ⅰ Introduction.........................................................................................................................................3
1 Brief Introduction...................................................................................................................................3
Ⅱ Unpacking IPBOARD（JL-）Tablet (TB3124RDV(T/8)) ...................................................................4
1 IPBOARD（JL-） Tablet (TB3124RDV(T/8)) Set .................................................................................4
2 Standard Accessories ..............................................................................................................................6
Ⅲ Installation of IPBOARD Vote Edition ...............................................................................................7
Ⅳ Run the Software ..............................................................................................................................14
1 Start IPBOARD Vote Edition driver.......................................................................................................14
2 Start IPBOARD Vote Edition ................................................................................................................14
3 Start voting manage system...................................................................................................................14
Ⅴ Features of IPBOARD（JL-）Tablet (TB3124RDV(T/8)) ................................................................16
1 Functions of the icons on the teacher’s tablet and student’s tablet .............................................................16
2 Introduction of two assignments by teachers...........................................................................................18
3 Set Questions .......................................................................................................................................18
4 Combined with IPBOARD（JL-）Tablet (TB3124RDV(T/8)) to answer questions interactively...............19
Ⅵ Description of Function Keys..........................................................................................................22
The Function keys on Teacher’ s tablet ................................................................................................22
2 The Function Keys on Student’s tablet ................................................................................................23
Ⅶ Performance Specifications ............................................................................................................24
Ⅰ Introduction
1 Brief Introduction
IPBOARD（JL-）Tablet (TB3124RDV(T/8)) enables students to participate more actively in class than
ever before, and it is the smart way to provide in-class immediate assessment for users. It is bringing a
revolution to the education filed.
One-to-multi wireless tablet (JL- TB3124RDV(T/8)) support has been added to IPBOARD Vote Edition.
Using the related software or buttons, teachers can designate a student to write on the tablet, as well as
conducting application of the software or restricting student’s writing permission. It allows students to
answer questions in the form of full sentences, numbers, symbols, etc.; in addition, teachers can conduct test
with the buttons on the tablet in the course of answering, such as switching questions, checking the correct
answer, tracking students’ performance and viewing answer statistic, etc.
Each student has the chance to express opinions through student terminal, moreover, teachers can get the
feedback of students’ in-class performance timely by using the tablet.
Ⅱ Unpacking IPBOARD（JL-）Tablet (TB3124RDV(T/8))
1 IPBOARD（JL-）Tablet (TB3124RDV(T/8)) Set
The interactive system of IPBOARD（JL-）Tablet consists of IPBOARD Vote Edition, IPBOARD（JL-）
Tablet (TB3124RDV(T/8)), transceiver and electronic pens. And there are two types of IPBOARD（JL-）
Tablet (TB3124RDV(T/8)): IPBOARD（JL-）Tablet for teachers (teacher’s tablet) and IPBOARD（JL-）
Tablet for students (student’s tablet).
Sleep&W
ake Key
LCD
Screen
Writing&Controlling
Area
Front face of 1-to-16 IPBOARD（JL-）Tablet for teachers
（The models of IPBOARD（JL-）Tablet: 1/8 (T8), 1/16 (T16), 1/24 (T24), 1/32 (T32), 1/48 (T48). The
image is for reference only, subject to the delivered goods.）
Sleep&W
ake Key
LCD
Screen
Voting
Area
IPBOARD（JL-）Tablet for students
Power
Switch
Charge
Interface
Profile
Pad
ROHS
Identifier
NetID、
DeviceID
Screw
Stopper
Back face
¾
If the tablet network conflicts with the nearby wireless device, users can modify the ID number to
solve such problem.
¾
Device ID is corresponding to the student’s number, which can be used to identify different terminals.
In addition, the Device ID of teacher’s tablet is a fixed value of 999.
2 Standard Accessories
Standard Accessories include:
Description
Quantity
Purpose
Specialized Electronic
The pens specially
Pen for IPBOARD
designed for
（JL-）Tablet
IPBOARD（JL-）,
(TB3124RDV(T/8))
with AAA batteries
of 1.5V
Transceiver
Ensure that the
computer connect
with IPBOARD
（JL-）Tablet
(TB3124RDV(T/8))
IPBOARD（JL-） Vote
Edition Install Disc
IPBOARD（JL-）
Tablet
(TB3124RDV(T/8))
driver and
application
IPBOARD（JL-）
Tablet
Operation
introduction
(TB3124RDV(T/8))
Manual
Charger
To charge
IPBOARD（JL-）
Tablet
(TB3124RDV(T/8))
Figure
Ⅲ Installation of IPBOARD Vote Edition
3.1 Insert IPBOARD Vote Edition Software disc
3.2 Click the program icon
3.3 Proceed to setup wizard window
3.4 Click
to install IPBOARD Vote Edition and drivers.
3.5 Start the installation
3.6 Select the language you want to install.
3.7 Choose destination location.
3.8 Select the database you want to install
3.9 Select the setup type.
3.10 Complete installation.
3.11 The USB driver installation prompt will be displayed after software installation. FTDI USB driver will
be installed by default firstly; and then the Silicon driver for IPBOARD（JL-）Tablet (TB3124RDV(T/8)) can
be installed subsequently.
3.12 Complete the installation of FTDI driver
3.13 Then Silicon driver setup dialog will pop up.
10
3.14 Choose destination location.
11
3.15 Start the installation
3.16 Complete the installation of Silicon driver
12
Click Finish, and the dialog as shown below pops up:
Click
and then plug-in the transceiver to complete the installation.
13
Ⅳ Run the Software
1 Start IPBOARD Vote Edition driver
Click
〝 Start 〞
→
〝 All
→
programs 〞
→
→
Then a tray icon
to run IPBOARD Vote Edition driver.
will be displayed in status bar on lower-right corner of the desktop.
If it shows 〝Communication with IPBOARD（JL-）Tablet（TB3124RDV(T/8)）failed
〞, please make sure that the transceiver is successfully connected, IPBOARD（JL-）
Vote Edition and USB driver have been correctly installed. And then click IPBOARD
（JL-） Driver on the desktop.
2 Start
IPBOARD Vote Edition
1) Click 〝 Start 〞
→
→ 〝 All programs 〞 →
→
, then a login window will pop up as
shown below:
2） Users can click Login to access IPBOARD Vote Edition directly.
3 Start voting manage system
1) Click 〝 Start 〞
→
→ 〝 All programs 〞 →
→
, then a dialog will pop up as shown
below:
14
Key in the administrator account to access the voting manage system. The default administrator account is
Administrator and the password: julong.
2) Click
to enter the system manage window, as shown below:
3)For adding, modifying or setting the information in ‘Class Management’, ‘Student Management’, 〝
Teacher Management’, ‘Grade Management’, ‘Statistics Management’ and ‘System Management’, please
see the help text of IPBOARD Vote Edition for details.
15
Ⅴ Features of IPBOARD（JL-）Tablet (TB3124RDV(T/8))
Please see the help text of IPBOARD Vote Edition for more details about the introduction of each voting
tool.
‹
IPBOARD（JL-）Tablet (TB3124RDV(T/8)) should be charged for about 2.5 hours
before first-use. The charger indicator is red while charging, and it turns green after
full charged.
‹ Sleep button: it is used for reducing power consumption, so as to extend the
operation hours. IPBOARD（JL-）Tablet（TB3124RDV(T/8)） will access to sleep
mode after 9 minutes suspension of operation. And users can press the button to
wake up IPBOARD（JL-）Tablet. The LCD screen will turn grey in sleep mode.
1 Functions of the icons on the teacher’s tablet and student’s tablet
1.1 Icons on the IPBOARD（JL-）Tablet for Teachers
1-to-16 IPBOARD（JL-）Tablet for teachers
(The image is for references only, subject to the delivered goods.)
IPBOARD（JL-）Tablet for Teachers consists of five zones:
Zone ①: It is the students’ seating area; each student icon is corresponding to a specified student, which
allows teachers to guide the operation of an appointed student easily.
16
Zone ②: there are four buttons -- Test Controller
, Show Answer
, Cancel Question
. Teachers can export test controller and conduct the test (such as switching to the previous or next
question, starting, suspending, or stopping answering, etc.) easily by using Test Controller.
Zone ③ : It is the statistics area. It includes three buttons -- ‘Answer Distributing Statistics’
, ‘True/False’
and ‘Score’
Zone ④: Writing icons are well distributed in this area, which is similar to that of JL-9000B Interactive
whiteboard. Users are allowed to switch mode and write by clicking these icons directly.
Zone ⑤: It includes two buttons – ‘Allow student to write’
and ‘Allow student to answer’
which enable teachers to assign any student to write and answer questions.
1.2 Icons on the IPBOARD（JL-）Tablet for Students
IPBOARD（JL-）Tablet for Students consists of four zones:
Zone ①: it is designed to enable students to answer questions of different types (about 8 types). Using
letter keys, number keys and other auxiliary keys (blank key, interpunction keys, etc.), students can answer
various questions (such as True/False, Yes/No, multiple choice, multiple answer, blank-filling, etc.) easily.
Zone ②: Writing icons are well distributed in this area, which is similar to that of JL-9000B Interactive
whiteboard. Users are allowed to switch mode and write by clicking these icons directly.
Zone ③: It includes question button, confirm button, menu button
17
and other auxiliary keys
(including up, down, left and right keys, which can be used for updating the product later on.)
Zone ④: It includes two buttons ---
and
2 Introduction of two assignments by teachers
The IPBOARD（JL-）Tablet for teachers has two special buttons: ‘Allow student to write’ and ‘Allow
student to answer’, which can be used to assign students to write on the tablet and answer questions
respectively.
2.1 Assign students to write
on the teacher’s tablet, and next click the number of the assigned student
Click
NO. 6), then click
(eg.
, and then the student is allowed to write. Through such operation, teachers can
restrict the writing permission of NO. 6 student and assign another student to wirte (only one student
available at a time).
2.2 Assign students to answer questions
, the Test Controller as shown below will pop up:
If student’s tablet is unwritable after clicking
Then the teacher can click
to enable students to answer questions.
3 Set Questions
Click
in the menu bar to vote. 8 different types of questions have been added in the IPBOARD Vote
Edition, as shown below:
18
4 Combined with IPBOARD（JL-）Tablet (TB3124RDV(T/8)) to answer questions interactively
Blank-filling
(Eight types of questions are available, and here take blank-filling as an example.)
4.1 Switch on IPBOARD（JL-）Tablet (TB3124RDV(T/8)) for teachers and students respectively, and
then click
on right side of the teacher’s tablet, the dialog as shown below pops up:
19
4.2 Click
on teacher’s tablet, and then students are allowed to answer questions.
4.3 Key in answers on the student’s tablet. Then click
4.4 After answering questions, click
to submit the answers.
on teachers’ tablet to check the correct answers, as shown
below:
20
4.5 Click
percentage of test; click
to check the answer trend of test; click
to check the true/false
to view the score statistic report, as shown below:
21
Ⅵ Description of Function Keys
The Function keys on Teacher’ s tablet
Function Keys
on the teacher’s
tablet
Definition
Control Mode
Window Mode
Annotation
Mode
Allow student to
It allows students to operate
It allows student to
It allows
write
in control mode.
write.
student to write
Test Controller
Test Controller
Test Controller
Switch to control
Switch to
mode
control mode
Allow student to
answer
Control Mode
No Effect
Annotation Mode
Switch to annotation mode
Window Mode
Switch to Window Mode
Full Screen Mode
Switch to full screen mode
Create a blank
Switch to annotation mode
page
and create a blank page
Page Up
No Effect
Page Up
Page Up
Page Down
No Effect
Page Down
Page Down
Red Normal Pen
Green Normal Pen
Blue Normal Pen
Black-normal Pen
Transparent Pen
Switch to annotation mode
and use red normal pen
Switch to annotation mode
and use green normal pen
Switch to annotation mode
and use blue normal pen
Switch to annotation mode
and use black normal pen
Switch to annotation mode
and use transparent pen
Switch to annotation
mode
No Effect
No Effect
Switch to
window mode
Switch to full screen
Switch to Full
mode
screen mode
Create a blank page
Red Normal Pen
Green Normal Pen
Blue Normal Pen
Black-normal Pen
Create a blank
page
Red Normal
Pen
Green Normal
Pen
Blue Normal
Pen
Black-normal
Pen
Transparent Pen
Transparent Pen
Eraser
No Effect
Eraser
Eraser
Undo
No Effect
Undo
Undo
Redo
No Effect
Redo
Redo
Replay
No Effect
Replay
Replay
22
2
The Function Keys on Student’s tablet
Function keys
on the student’s
tablet
Definition
Control Mode
Window Mode
Annotation Mode
Control
Mode
No Effect
Switch to
Control Mode
Switch to Control
Mode
Annotation
Mode
Switch to Annotation
Mode
Switch to
Annotation
Mode
No Effect
Window
Mode
Switch to Window
Mode
No Effect
Switch to Window
Mode
Full Screen
Mode
Switch to Full Screen
Mode
Switch to Full
Screen Mode
Switch to Full
Screen Mode
Create a
blank page
Switch to Full Screen
Mode and Create a
blank page
Create a blank
page
Create a blank
page
Page Up
No Effect
Page Up
Page Up
Page Down
No Effect
Page Down
Page Down
Red Normal
Pen
Switch to annotation
mode and use red
normal pen
Red Normal
Pen
Red Normal Pen
Green
Normal Pen
Switch to annotation
mode and use green
normal pen
Green Normal
Pen
Green Normal Pen
Blue Normal
Pen
Switch to annotation
mode and use blue
normal pen
Blue Normal
Pen
Blue Normal Pen
Black
Normal Pen
Switch to annotation
mode and use black
normal pen
Black Normal
Pen
Black Normal Pen
Transparent
Pen
Switch to annotation
mode and use
transparent pen
Transparent Pen
Transparent Pen
Eraser
No Effect
Eraser
Eraser
Undo
No Effect
Undo
Undo
Redo
No Effect
Redo
Redo
Replay
No Effect
Replay
Replay
23
Ⅶ Performance Specifications
CONTENT
SPECIFICATION
ASPECT RATIO
4:3
PHYSICAL SPECIFICATION
DIMENSION
370.0MM X 320.0MM
ACTIVE WRITING AREA
304.5MM X 230.5MM
THICKNESS
MIN.: 3.5MM
MAX.: 19.0MM
980G (INCLUDING BATTERY)
NET WEIGHT
TECHNICAL SPECIFICATION
OPERATION PRINCIPLE
ELECTROMAGNETIC INDUCTION
ORIENTATION
DEFAULTED ORIENTATION
RESOLUTION
100 L/CM (254 L/INCH)
TRACING SPEED
6M/S
READING SPEED
180PPS
READING HEIGHT
5MM (0.20 INCH)
PRECISION
TILTING
ANGLE
ELECTRONIC PEN
±0.1MM
± 60 DEGREE
OF
WORKING VOLTAGE
DC 3.6V, NI-MH RECHARGEABLE BATTERY
＜100 MA
WORKING ELECTRICITY
＜0.4W
POWER
WORKING
ENVIRONMENT
TEMPERATURE: -10℃~50℃ RELATIVE HUMIDITY: 30%~80%
NON-CONDENSING
STORAGE
ENVIRONMENT
TEMPERATURE: -25℃~70℃ RELATIVE HUMIDITY: 10%~90%
NON-CONDENSING
TRANSMISSION
TECHNOLOGY
2.4G RF WIRELESS TRANSMISSION (CONFORMING TO IEEE802.15.4
STANDARD)
CLUSTER GROUP
ONE-TO-MULTI (1-TO-8, 1-TO-16, 1-TO-24, 1-TO-32, 1-TO-48)
TRANSMITTING SPEED
DATA
TRANSMISSION
RANGE
57600BPS
≤20M (WITH OBSTACLE), ≤120M (WITHOUT OBSTACLE)
LCD DISPLAY
128 X 64 DOT (WITH BACKLIGHT)
OPERATION SYSTEM
WINDOWS XP，WINDOWS VISTA
SPECIFICATIONS OF ACCESSORIES
WRITING PEN
ACTIVE E-PEN (WITH AAA-BATTERY)
135MM X 14MM
DIMENSION
WEIGHT
CHARGER
40G (INCLUDING BATTERY)
600mA
INPUT:100-250V 50/60Hz OUTPUT:3.0-9V
24
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:04:27 14:57:12+08:00
Create Date                     : 2010:04:27 14:54:51+08:00
Metadata Date                   : 2010:04:27 14:57:12+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 用户手册En.doc
Creator                         : User
Document ID                     : uuid:89668fa9-89f9-4c76-8f36-322fdd58e2ef
Instance ID                     : uuid:947955bc-43f9-43e3-8253-987e8a9a8379
Page Count                      : 25
Author                          : User

EXIF Metadata provided by EXIF.tools