Japan Radio JHS-180 AIS User Manual Operations Manual

Japan Radio Co Ltd. AIS Operations Manual

Operations Manual

Download: Japan Radio JHS-180 AIS User Manual Operations Manual
Mirror Download [FCC.gov]Japan Radio JHS-180 AIS User Manual Operations Manual
Document ID310166
Application ID2q0YleoEA5dU/XO2OqaptQ==
Document DescriptionOperations Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.8kB (309964 bits)
Date Submitted2003-03-14 00:00:00
Date Available2003-06-17 00:00:00
Creation Date2003-03-06 13:04:38
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2003-03-06 13:09:22
Document TitleOperations Manual

Automatic Identification System
Model JHS-180
Operation Manual
(Field Maintenance)
CONTENTS
1.Field Maintenance mode
1.1 Turning On the power for Field Maintenance mode
1.2 Menu Tree of Field Maintenance mode
2. FIELD MAINTENANCE
2.1 SELF TEST
2.2 COMM STATUS
2.3 REPORTING RATE
2.4 SELF TEST LOG
2.5 RANGE ALARM LOG
2.6 PORT LOG
2.7 PORT OPTION
2.8 TRX CHECK
2.9 SOFTWARE VER UP
3. INITIALIZE
3.1 SENSOR SETTING
3.2 INT. GPS SETTING
3.3 SHIP STATIC DATA
3.4 TRANSPONDER INIT
3.5 ANTENNA SELECTION
1.Field Maintenance Mode
1.1 Turning On the power for Field Maintenance mode
JHS-180 can operate “Field Maintenance Mode” for installation and maintenance.
To operate “Field Maintenance Mode”, JHS-180 needs special operation in turning the power on.
The special operation is;
When turn the power on, pressing and holding [PWR] and [MENU] until starting display
“AIS CONTROLLER NOW LOADING ---” appears.
In “Field Maintenance Mode” operation,
- The transponder doesn’t operate automatically TDMA transmission.
- Two menu item are added to the “Main Menu”.
“Main Menu” in Field Maintenance Mode operation
1.2 Menu Tree of Field Maintenance mode (Power On:[MENU]+[PWR])
Select(1) key
(Power On)
Other Ships List
[▲]/[▼],[ENT]
Other Ship's detail Information
[0]-[9] or [▲]/[▼],[ENT]
[0]-[9] or [▲]/[▼],[ENT]
[0]-[9] or [▲]/[▼],[ENT]
[MENU]
[MENU]key
3.MAIN MENU
1.MESSAGE
1.EDIT AND TX
Destination address
Message type
Message editing
Transmission
2.TX TRAY
3.RX TRAY
4.INTERROGATION
5.LONG RANGE
Transmitted Message reading
Received Message reading
Address,Req.Info., Tx and Ack
Received Long Range Message
2.DESTINATION
1.DESTINATION
2.WAYPOINT TEXT
3.ETA
4.WAYPOINT
3.NAVIGATION
1.NAVIGATIONAL STATUS
2.PERSONS ON-BOARD
3.TYPE OF SHIP
4.CARGO TYPE
5.DRAUGHT
6.HEIGHT OVER KEEL
4.ALARM SETTING
1.RANGE
2.LOST TARGET
5.GROUP SHIP
Registration, Deletion
6.SET UP
1.PASSWORD
2.CH MANAGEMENT
3.OWN SHIP DATA
4.LONG RANGE RESPONSE
5.CONTRAST
6.NUMBER OF RETRIES
7.MAINTENANCE
1.TRX CONDITION
2.AIS ALARM
3.SENSOR STATUS
4.POWER ON/OFF LOG
5.TX ON/OFF LOG
6.SOFTWARE VERSION
8.FIELD MAINTENANCE
1.SELF TEST
2.COMM STATUS
3.REPORTING RATE
4.SELF TEST LOG
5.RANGE ALARM LOG
6.PORT LOG
7.PORT OPTION
8.TRX ADJUST
User Menu
Field Maintenance Menu
9.SOFTWARE VERSION UP
Password changing
Each port sentence log
Transponder version up,
Controller version up
0.CONTROLLER INITIALIZE
9.INITIALIZE
1.SENSOR SETTING
1.SENSOR1 (Sentence Select, Baudrate,Parity bit)
2.SENSOR2 (Sentence Select, Baudrate,Parity bit)
3.SENSOR3 (Sentence Select, Baudrate,Parity bit)
4.SENSOR4 (Sentence Select, Baudrate,Parity bit)
5.SENSOR5 (Sentence Select, Baudrate,Parity bit)
2.INTERNAL GPS SETTING
1.INT. GPS POSITION
2.ANTENNA HEIGHT
3.ROUGHLY POSITION
4.UTC
5.TIME DIFFERENCE
3.SHIP STATIC DATA SETTING
1.SHIP NAME
2.MMSI NUMBER
3.IMO NUMBER
4.CALL SIGN
5.GPS ANT. POSITION
6.SENSOR TYPE
4.TRANSPONDER INITIALIZE
5.ANTENNA SELECTION
2. FIELD MAINTENANCE
“FIELD MAINTENANCE” menu is displayed by pressing
8 key in the “Main Menu”.
Display of “FIELD MAINTENACE”
2.1 SELF TEST
“SELF TEST” menu is displayed by pressing
1 key in the “FIELD MAINTENANCE” menu.
Display of “SELF TEST” (All result is OK)
Display of “SELF TEST” (All result is fault)
Display of “SELF TEST” (Time out)
Indication of failures in NTE-180 AIS Transponder
Control unit
CPU(FLASH ROM)
CPU(SRAM)
Ext. FLASH ROM
Serial
Communication
Access
Serial I/O
Digital Up Converter
GPS receiver
GPS Information
Indication
FROM
SRAM
EFROM
SCA
TRX unit
PA
Temperature
Forward power
Reverse power
SIO
DUC
GPS
GPS-INFO
Indication
PA
TEMP
VF
VR
2.2 COMM STATUS
“COMM STATUS” menu is displayed by pressing
2 key in the “FIELD MAINTENANCE” menu.
Display of “COMM STAUS”
2.3 REPORTING RATE
“REPORTING RATE” menu is displayed by pressing
3 key in the “FIELD MAINTENANCE” menu.
Display of “REPORTING RATE”
2.4 SELF TEST LOG
“SELF TEST LOG” menu is displayed by pressing
4 key in the “FIELD MAINTENANCE” menu.
Display of “SELF TEST LOG”
10
2.5 RANGE ALARM LOG
“RANGE ALARM LOG” menu is displayed by pressing
5 key in the “FIELD MAINTENANCE” menu.
Display of “RANGE ALARM LOG”
11
2.6 PORT LOG
“PORT LOG” menu is displayed by pressing
6 key in the “FIELD MAINTENANCE” menu.
Display of “PORT LOG”
Details of each port is displayed by pressing from
1 to
Display of “SENSOR1 LOG”
12
1 key in the “PORT LOG” menu.
2.7 PORT OPTION
“PORT OPTION” menu is displayed by pressing
7 key in the “FIELD MAINTENANCE” menu.
Display of “PORT OPTION”
13
2.8 TRX CHECK
“TRX CHECK” menu is displayed by pressing
8 key in the “FIELD MAINTENANCE” menu.
Display of “TRX CHECK”
“RX CHANNEL CHECK” menu is displayed by pressing
1 key in the “TRX CHECK” menu.
Display of “RX CHANNEL CHECK”
14
“TX POWER CHECK” menu is displayed by pressing
2 key in the “TRX CHECK” menu.
Display of “TX POWER CHECK”
“TX POWER ADJUS” menu is displayed by pressing
3 key in the “TRX CHECK” menu.
Display of “TX POWER ADJUST”
15
2.9 SOFTWARE VER UP
“SOFWARE VER UP” menu is displayed by pressing
9 key in the “FIELD MAINTENANCE” menu.
Display of “SOFTWARE VER UP”
Display of transponder version up in “SOFTWARE VERSION UP”
16
Display of controller version up in “SOFTWARE VERSION UP”
17
2.10 STATE INITIALIZE
“STATE INITIALIZE” is displayed by pressing
0 key in the “FIELD MAINTENANCE” menu.
Display of “STATE INITIALIZE”(OFF)
Display of “STATE INITIALIZE”(ON)
18
3. INITIALIZE
“INITIALIZE” menu is displayed by pressing
9 key in the “Main Menu”.
Display of “INITIALIZE”
19
3.1 SENSOR SETTING
“SENSOR SETTING” menu is displayed by pressing
1 key in the “INITIALIZE” menu.
Display of “SENSOR SETTING”
Each sensor filter menu is displayed by pressing from
1 to
Display of each sensor filter setting in “SENSOR SETTING”
20
5 key in the “SENSOR SETTING” menu.
3.2 INT. GPS SETTING
“INT. GPS SETTING” menu is displayed by pressing
2 key in the “INITIALIZE” menu.
Display of “INT. GPS SETTING”
21
3.3 SHIP STATIC DATA
“SHIP STATIC DATA” menu is displayed by pressing
3 key in the “INITIALIZE” menu.
Display of “SHIP STATIC DATA”
22
3.4 TRANSPONDER INIT
“TRANSPONDER INIT” menu is displayed by pressing
4 key in the “INITIALIZE” menu.
Display of “TRANSPONDER INIT”
23
3.5 ANTENNA SELECTION
“ANTENNA SELECTION” menu is displayed by pressing
Dispaly of “ANTENNA SELECTION”
24
5 key in the “INITIALIZE” menu.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:03:06 13:09:22-07:00
Create Date                     : 2003:03:06 13:04:38-07:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 24
Mod Date                        : 2003:03:06 13:09:22-07:00
Creation Date                   : 2003:03:06 13:04:38-07:00
Metadata Date                   : 2003:03:06 13:09:22-07:00
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CKEJHS-180

Navigation menu