Japan Radio JRN-130K 3G/GSM IT Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2424127
Application ID	LLW7fVbkPCsB0tJhwaLJEg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.78kB (359708 bits)
Date Submitted	2014-10-22 00:00:00
Date Available	2015-04-20 00:00:00
Creation Date	2014-10-17 10:44:57
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2014-10-17 10:44:57
Document Title	Microsoft Word - JRN-130K_3G／GSM版ITコントローラ仕様書_20141016_英語版.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	sato-tt

JRN-130K
3G/GSM IT Controller
User Manual
Doc# : AN-1490012-2 Ver.1.02
Date: Oct 15, 2014
@Copyright
Japan Radio Co., Ltd.
Mobile Communication Group
Engineering Department
Communication Products Division
3G/GSM IT Controller JRN-130K
History
Date
Sep 16, 2014
Oct 16, 2014
Oct 16, 2014
Number
1.00
1.01
1.02
The contents of change
DRAFT
2/19
AN-1490012-2
3G/GSM IT Controller JRN-130K
3/19
AN-1490012-2
Index
Introduction.............................................................................................................................. 4
Composition ............................................................................................................................ 5
Function .................................................................................................................................. 6
Product specification .............................................................................................................. 7
Block Diagram ...................................................................................................................... 11
External Interface ................................................................................................................. 12
Outline ................................................................................................................................... 14
Option .................................................................................................................................... 15
Compliance with FCC and IC Rules and Regulations ...................................................... 18
3G/GSM IT Controller JRN-130K
4/19
AN-1490012-2
Introduction
3G/GSM IT Controller (JRN-130K) is a vehicle small terminal to have the GPS measureme
nt function and the 3G/GSM communication function, and to use it for management and posit
ional information track / theft pursuit etc. of the vehicle.
As a communications protocol TCP/IP are mounted.
The terminal made by the Gemalto’s PHS8-P is installed.
1.1 Overview
The main specification is presented as follows.
No.
Items
Specification
3G/GSM Communication modu
le
(PHS8-P Gemalto)
UMTS 800/850 BandⅥ
Remarks
UMTS 800/850 BandⅤ*
Comnication
module
UMTS 900 BandⅧ*
UMTS 1900 BandⅡ*
UMTS 2100 BandⅠ
GSM850
GSM900
GSM1800
GSM1900
GPRS: Multislot Class 12
EGPRS: Multislot Class 12
CSD: V.110, RLP, non-transpa
rent
Data transfer
Communication
Antenna
DP-BR0-DSC(BNC)
NIPPON ANTENNA
GPS
Antenna
NAY-3930G
Internal Battery
NBB-1300（1300mAh/6.0V）
Current and Voltage
DC+20V～+32V 400mA max
Power-saving : 7.5mAmax
*:Only compatible module
3G/GSM IT Controller JRN-130K
5/19
AN-1490012-2
Composition
NO.
Equipment
3G/GSM Controller
(1) Communication Module
(2) Battery pack
GPS Antenna
3G/GSM Communication antenna
Model
Quantity
JRN-130K
PHS8-P Gemalto
NBB-1300
NAY-3930G
DP-BR0-DSC(BNC)
NIPPON ANTENNA
GPS Antenna
IT Controller
Power Supply & Control Block
Battery pack
3G/GSM Communication
Antenna
Communication
Module
Fuse
To Battery
To Construction machine
Connection I/F Cable
）
(Note#1)
Please prepare IF cable by the visitor side.
(Note#2)
A connection I/F cable requires a fuse because of over-current protection.
Please insert the fuse in three places of a battery, GND, and ACC.
(Note#3)
Please do not take a power supply from DC cigar.
It becomes the cause that operation is poor, according to loose connection.
3G/GSM IT Controller JRN-130K
6/19
AN-1490012-2
Function
(1) Operation in ACC OFF executes the following.
-1. Send data in daytime and nighttime.
-2. Respond to calling from the server.
-3. Acquisition of information on the actual location by GPS,
and Generation of warning outside area.
(2) Storage of operation data
(3) Timer
Even if the main source of power is cut, the date and time are maintained.
(4) Backup
The re-charge battery is installed.
Even if it disconnects a power supply, the operational mode and network transmission setting
of IT controller are held.
(5) Serial communication ports
Connection I/F (CAN), 115200bps(monitor)
(6) GPS function
Present location is acquired.(WGS84)
(7) 3G/GSM communication
(8) Software rewriting function
A software rewriting is done by using the monitor port.
(9) Serial communications with the external equipment are done by the serial commands.
1) Key ON
2) Engine ON
3) Key OFF
4) Alarm
5) Fuel residual quantity
6) Engine amount of water
7) Engine oil level
8) Hydraulic oil level
9) Engine oil pressure
10) Engine water temperature
11) Air cleaner
12) Charge
13) DS (compulsive key OFF)
14) RT (the present state inquiry)
15) HS (foxtail millet meter change)
16) CO (command)
17) Automatic key-off judging processing
(10) Communication protocol
It transmits to the mail server by the e-mail.
(11) Time Zone
Setting UTC+α, and operating.
3G/GSM IT Controller JRN-130K
7/19
AN-1490012-2
Product specification
4.1 Common Specification
NO． Items
Power supply
voltage
Battery pack
DC+20 to +32V
SIM
Interface
Current
1.8V/3.0V
Circumference
environment
Specification performance
NiMH rechargeable battery
NBB-1300（1300mAh/6.0V）
Communication: max current Less than 400mA（+25℃）
Idle:7.5mAmax（When not charging the battery）
Operation:
Preservation:
Humidity of operation:
-30 to +70 degree C
-40 to +80 degree C
0% to 90% (don't dew)
Dimension
At use in battery,
Operation:
-20 to +70 degree C
0 to 70 degree C of the charge operates.
136.4(W)×220.0(D)×43.6(H) mm
Weight
1,300g or less
Case material
SPCC
3G/GSM IT Controller JRN-130K
4.1 Serial Interface Specification
(1) A. DTE CAN
NO．
Items
Data transmission
Speed
Communication format
Switch to the RS-232C
(1) B.
NO．
Specification performance
SAE J1939
250/500 kbps
Extension 29bit
By the chip jumper change
DTE RS-232C
Items
Data transmission
Signal level
Speed
Frame length
Data Length
Start bit
Parity bit
Stop bit
Specification performance
Half duplex start-stop synchronization
RS-232C
4800bps
Variable-length
8 bit
1 bit
None
1 bit
(2) Console（Debug）
NO．
Items
Data transmission
Signal level
Speed
Frame length
Data Length
Start bit
Parity bit
Stop bit
Character
Specification performance
Half duplex start-stop synchronization
RS-232C
115200bps
Variable-length
8 bit
1 bit
None
1 bit
EUC
8/19
AN-1490012-2
3G/GSM IT Controller JRN-130K
4.1 GPS
NO．
Receiver Specification
Items
Model
Receiving system
Received frequency
Land survey system
Time system
Positioning accuracy
Position
Speed
Direction
Speed
T.T.F.F
(Without signal
discontinuation)
Open skies
Specification performance
CCA-705JZ (JRC)
Max 16hannel (high-speed search channel)
1575.42MHz(L1)､C/A code
WGS-84（Default）
UTC
5.3m 2DRMS
0.04m/sec. RMS
Less than 0.14°RMS
1 sec
Hot start:
4s
Warm start:
33s
Cold start:
35s
(Speed 60km/h)
typ./15s max.
typ./55s max.
typ./60s max.
4.1 3G/GSM module Specification
By PHS8-P 3G/GSM communication module specification.
9/19
AN-1490012-2
3G/GSM IT Controller JRN-130K
10/19
AN-1490012-2
4.1 External connector specification
NO．
Items
Power/Serial connector
GPS antenna connector
Communication antenna
Specification performance
XMR (JST)
Model : XMR-09V
［Cable side connector model : XMP-09V(JST)］
GT5 (HIROSE)
Model : GT5P-1PP-HU(70)
BNC (Yuetsu Seiki)
Model : BNC-PJ-C0-6F
4.1 Software
JRN-130K application software external I/F specifications is prescribed about the command list a
nd block structure about software.
Implement the software that customers have created.
3G/GSM IT Controller JRN-130K
Block Diagram
11/19
AN-1490012-2
3G/GSM IT Controller JRN-130K
12/19
AN-1490012-2
External Interface
6.1 External Interface Specification
Pin Assign
NO
Name
GND
Moni-Tx
Moni-Rx
CAN H
CAN L
CAN_EN
GND
ACC
BAT
Remarks
GND
Monitor→ITcontroller
ITcontroller→Monitor
CAN Low-Level Voltage I/O
CAN High-Level Voltage I/O
CAN Enable
GND
ACC signal
Main battery
6.2 GPS Antenna Connector
Pin Assign
NO.
Name
RF
GND
Remarks
Receive
GND
6.1 Communication Antenna Connector
Pin Assign
NO.
Name
RF
GND
Remarks
TX/RX
GND
3G/GSM IT Controller JRN-130K
13/19
AN-1490012-2
6.1 Equivalent circuit
BAT
DC/DC Converter
to PWR SPLY
＋3.3V
ACC
GND
To CPU
CANH
CANL
CAN_EN
MON-R
from CAN Interface IC
from CAN Interface IC
Enable control circuit
330
MON-T
from Serial Interface
330
GND
from Serial Interface IC
3G/GSM IT Controller JRN-130K
Outline
14/19
AN-1490012-2
3G/GSM IT Controller JRN-130K
15/19
AN-1490012-2
Option
8.1 GPS antenna
(1) Specification
NO．
Items
Power supply voltage
Consumption current
Cable
Temperature range of
operation
Storage temperature
range
Humidity
Received frequency
range
Polarized wave
Profit
10
11
12
Output impedance
OUTPUT VSWR
Connector
Specification performance
2.7V to 3.3V
12mA to 30mA
1. 5D Cable and 5M (Black)
-30 degree C to +85 degree C
-40 degree C to +100 degree C
20% to 95%
(relativity, however thing without dew condensation)
1575. 42±1.023MHz
Right-handed circular polarization
25±6dBi
(ascending vertical angle = 90 degrees)
50 ohms
2.0, or less
GT5-1P-HU (HIROSE)
(2) Outline
単位：mm
3G/GSM IT Controller JRN-130K
8.2
16/19
AN-1490012-2
Communication antenna
(1)Specification
No.
Items
Specification performance
DP-BR0-DSC(BNC)
λ/2 Shortened type Dipole antenna
For the indoor antenna, double-sided tape attachment
approximately 70g
RoHS and ELV
Model
Antenna type
Purpose
Weight
Environmental
Regulation
Frequency
Nominal impedance
50Ω
VSWR
2.3 at the end of the cable.
It is measured in free space.
Peak gain
A,B,E,G-(1)
cable.
C,D,F,G-(2)
cable.
10
11
12
13
14
15
16
17
Polarization
Directivity
Input power
Cable loss
(Reference)
815MHz～2170MHz
A:US800/GSM850 824～849MHz/869～894MHz
B:GSM900
880～915MHz/925～960MHz
C:GSM1800
1710～1766MHz/1805～1880MHz
D:PCS/GSM1900
1850～1910MHz/1930～1990MHz
E:CDMA1X
815～925MHz
F:PHS
1884MHz～1920MHz
G:FOMA
(1)830～880MHz/(2)1920～2170MHz
H:SBM（W-CDMA）
1960～1980MHz/2150～2170MHz
I:GPS
1575.42MHz
not exceeding 1.0dBi at the end of the
not exceeding 3.5dBi at the end of the
Vertical
Horizontal plane omni-directional
Not exceeding 2W
1.5D Coaxial cable
900MHz 1.58dB / 2.5m
2000MHz
2.45dB / 2.5m
-30
～+80
degree
Operating temperatur
e range
Storage temperature -40 ～+85 degree C
range
Operating humidity li 0%～95%
mits
Connector
BNC
3G/GSM IT Controller JRN-130K
(2)Outline
NO.
Items
Specification performance
Case
1.5D Coaxial cable
BNC
Two-sided adhesive tape
Label
AES
2.5m±10cm
C3604･Ep-Cu/Ni
Tetoron film
17/19
AN-1490012-2
3G/GSM IT Controller JRN-130K
18/19
AN-1490012-2
Compliance with FCC and IC Rules and Regulations
・FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference, including interference that may cause undesired operation.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
・IC
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
This radio transmitter (IC: 768B-JRN130K) has been approved by Industry Canada to operate
with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having
a gain greater than the maximum gain indicated for that type, are strictly prohibited for
use with this device.
Antenna type/Model name
Maximum Antenna gain
(including the cable loss)
Nominal impedance
: Half length dipole antenna/DP-BRO-DCS (BNC)
: 800MHz-1GHz -0.58dBi
1GHz-2.5GHz +1.05dBi
: 50Ω
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils r
adio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
3G/GSM IT Controller JRN-130K
19/19
AN-1490012-2
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil d
oit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptibl
e d'en compromettre le fonctionnement.
Le présent émetteur radio (IC: 768B-JRN130K) a été approuvé par Industrie Canada pour f
onctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible max
imal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus
dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont stricteme
nt interdits pour l'exploitation de l'émetteur.
Type d'antenne /Nom du modèle :
Le gain maximal de l'antenne :
(La perte du câble est incluse)
Impédance nominale
Antenne dipôle demi-longueur/DP-BRO-DCS (BNC)
800MHz-1GHz -0.58dBi
1GHz-2.5GHz +1.05dBi
50Ω
・FCC/IC
RF exposure compliance
1) To comply with FCC/IC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons.
2) This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Normes d'exposition RF
1) Afin de se conformer aux normes FCC / IC RF exigences de conformité de l'exposition,
une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de l'a
ppareil et les personnes.
2) Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec une autre
antenne ou émetteur.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : sato-tt
Create Date                     : 2014:10:17 10:44:57+09:00
Modify Date                     : 2014:10:17 10:44:57+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : sato-tt
Title                           : Microsoft Word - JRN-130K_3G／GSM版ITコントローラ仕様書_20141016_英語版.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:7a8757e0-8a4a-4490-af54-d041c89487d1
Instance ID                     : uuid:fbf082b5-55ec-4bcf-9321-d7d4fe3047af
Page Count                      : 19

EXIF Metadata provided by EXIF.tools