Jasboom Smart Technology JAS200F01 CCTV CAMERA User Manual 2017 11 28

Download:
Mirror Download [FCC.gov]
Document ID	3676878
Application ID	QTrOUuoKq5zA/rA1IIs7WA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.03kB (787881 bits)
Date Submitted	2017-12-13 00:00:00
Date Available	2017-12-14 00:00:00
Creation Date	2017-11-28 11:33:17
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-11-28 11:33:17
Document Title	2017.11.28版本.cdr
Document Creator	CorelDRAW
Document Author:	windows8.1

Quick
Installation
Guide
The camera supports two modes. One is AP
(Access Point) mode (router is not required)
which is default mode and the other is Station
mode (router is required).
1. AP mode: You must start from this
mode for the first time installation
of your camera.
* If the App is already installed, go to Step (2).
(1) Download and Install the App "JASBOOM"
IOS
Android
** If you already installed a camera and this is your
second camera using the same App, please skip
Steps (4) & (5) and go to Step (6) **
2. Station mode: Router is required.
Make sure your router is working
well.
(5) Select Search for device (figure 2). Go to Step (7).
(6) Start the App (JASBOOM) on Main screen
--> Please tap + on top right position --> select
Add networked device --> select LAN search
(1) Make sure you are on AP mode and can watch
live video (figure 3).
(2) Select Device on bottom of the screen and
choose a device (ID number of the camera) from the
list (figure 4).
(7) Once the connection is successful, a screen will be
shown (figure 3). Now you can watch live video.
* Some functions are not supported by AP mode.
Please use Station mode for full functions.
in "App Store". Do not open the App. Just quit
"App Store" and Go to Main screen.
(figure 3)
(3) Select Network settings. You will see AP mode
is ticked (figure 5). Tick Station mode. Now you will
see the list of local Wi-Fi devices (figure 6).
(figure 4)
(4) Select the name of your router (you must select
in "Google Play". Do not open the App. Just quit
"Google Play" and Go to Main screen.
2.4GHz if it shows 2.4GHz and 5GHz for dual band
router), enter Wi-Fi password of your router and
(2) Co nnect power to the camera and wait. You
will hear "System is starting" --> "System setup is
completed" --> "Access Point establishing" --> "
Access Point established".
press Save button (this button could be hidden
under keypad).
(5) You will see "Configuration change successful"
message. Please select No (selected router will be
automatically connected).
(3) Go to Settings of your smartphone --> open
Wi-Fi list --> connect to the camera's hotspot (MV and
device ID number such as MV12345678) (figure 1).
Once it is connected, please go back to Main screen.
(6) You will hear "Wi-Fi connecting" --> "Wi-Fi
connected". Press My device.
(7) Once the connection is successful, a screen will
(4) Start the App (JASBOOM) on Main screen -->
Select your Area
be shown (figure 3). Now you can watch live video.
(figure 1)
(figure 2)
(figure 5)
(figure 6)
4. How to restore to factory's default
setting?
3. How to change Station mode to
AP mode?
(1) Make sure you are on Station mode and can
watch live video (figure 3).
Make sure that power is connected. Press Reset
(2) Select Device on bottom of the screen and
choose a device (ID number of the camera) from the
list (figure 4).
that the equivalent isotropically radiated power (e.i.r.p.) is
Déclaration d’exposition aux radiations:
encouraged to try to correct the interference by one or more
not more than that necessary for successful communication.
Cet équipement est conforme aux limites d’exposition aux
of the following measures:
rayonnements IC établies pour un environnement non
1.Reorient or relocate the receiving antenna.
Conformément à la réglementation d'Industrie Canada, le
contrôlé. Cet équipement doit être installé et utilisé avec
2.Increase the separation between the equipment and
présent émetteur radio peut fonctionner avec une antenne
un minimum de 20 cm de distance entre la source de
receiver.
d'un type et d'un gain maximal (ou inf érieur) approuvé pour
rayonnement et votre corps.
3.Connect the equipment into an outlet on a circuit different
button of the camera for more than 5 seconds.
l'émetteur par Industrie Canada. Dans le but de réduire les
from that to which the receiver is connected.
You will hear "Restore factory's default setting" --> "
risques de brouillage radioélectrique à l'intention des autres
Consult the dealer or an experienced radio/TV technician for
Access Point establishing" --> "Access Point
utilisateurs, il faut choisir le type d'antenne et son gain de
established".
sorte que la puissance isotrope rayonn ée équivalente
(3) Select Network settings. You will see Station
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à
mode is ticked (figure 6). Tick AP mode and leave
l'établissement d'une communication satisfaisante.
blank on password (no password) (figure 5).
IC Statements
(4) Press Save button (this button could be hidden
under keypad).
Le présent appareil est conforme aux CNR d'Industrie
This device complies with Industry Canada licence-exempt
(5) You will see "Configuration change successful"
message. Please select Yes. It will go to Settings of
your smartphone --> open Wi-Fi list --> connect to
the camera’s hotspot (MV and device ID number
such as MV12345678) (figure 1). And also you will
hear "Access Point establishing"--> "Access Point
established" (there could be time delay.)
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autoris é e aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi,même si le brouillage est susceptible
interference that may cause undesired operation of the
d'en compromettre le fonctionnement.
device.
Under Industry Canada regulations, this radio transmitter
IC Radiation Exposure Statement:
(6) Please go back to the App screen. Press My device.
may only operate using an antenna of a type and maximum
This equipment complies with IC radiation exposure limits
(7) Once the connection is successful, a screen will
be shown (figure 3). Now you can watch live video.
(or lesser) gain approved for the transmitter by Industry
set forth for an uncontrolled environment. This equipment
Canada. To reduce potential radio interference to other
should be installed and operated with minimum distance
users, the antenna type and its gain should be so chosen
20cm between the radiator & your body.
FCC Statements
help.
FCC RF exposure statements
FWarning: Changes or modifications to this unit not
This Transmitter must not be co‐located or operating in
expressly approved by the party responsible for compliance conjunction with any other antenna or transmitter.
could void the user's authority to operate the equipment.
This equipment complies with FCC RF radiation exposure
NOTE: This equipment has been tested and found to comply
limits set forth for an uncontrolled environment. This
with the limits for a Class B digital device, pursuant to Part
equipment should be installed and operated with a minimum
15 of the FCC Rules. These limits are designed to provide
distance of 20 centimeters between the radiator and your
reasonable protection against harmful interference in a
body or nearby persons.
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
This device complies with Part 15 of the FCC Rules.
and used in accordance with the instructions, may cause
Operation is subject to the following two conditions :
harmful interference to radio communications.However,
(1) this device may not cause harmful interference, and
there is no guarantee that interference will not occur in a
(2) this device must accept any interference received,
particular installation. If this equipment does cause harmful
including interference that may cause undesired operation.
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Create Date                     : 2017:11:28 11:33:17+08:00
Modify Date                     : 2017:11:28 11:33:17+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Author                          : windows8.1
Creator                         : CorelDRAW
Title                           : 2017.11.28版本.cdr

EXIF Metadata provided by EXIF.tools