Jehe Technology Development SDM-S Embedded System User Manual

Shenzhen Jehe Technology Development Co.,Ltd. Embedded System

User manual

CPUIntel® Atom x5-Z8350Frequency1.44 GHz (Up to 1.92 GHz)BIOSAMI Source CodeChipsetSOCSystem MemoryDDR3L 1600MHz, Onboard 2 GBGPUIntel® HD Graphics 400Graphic EngineDirectX11, OpenGL4.0 and OpenCL 1.2Network Controller Realtek RTL8111F Gigabit EthernetWiFi+BT on BoardRL-SM02BD-8723BS for WIFI+BTStorageeMMC Onboard 32GB JAHC (Patented Tech)WatchDog Timer, Auto Power On, RTCGiada SDM-Z8350 Intel® SDM-S Atom PlayerThe product appearance, specifications and features are subject to change. Giada reserves the right of final interpretation for the content hereinabove.USB1 x USB3.0Display Interface1 x HDMI1.4b (Max. 2560 x 1600 @24Hz)1 x DP1.1a (Max.4096 x 2304 @60Hz)Serial Port1 x COMDimensions109.9mm x 60mmPower RequirementSDM I/O 12V/2AOperation SystemWindows 8.1/10 (64 Bit)/Android/LinuxStorage Temperature-40 ~ 75°C (-40 ~ 167°F)Operating Temperature0 ~ 60°C (32 ~ 140°F) Relative Humidity95% @ 60°C(non-condensing)Core System Mechanical and EnvironmentalDimensions and DrawingSDM I/O (PCIe x8 Edge Connector)USB2 x USB2.0Ethernet1 x RJ45Rear I/OFeaturesIntel® Cherry Trail Atom Z8350 ProcessorsOnboard 2GB DDR3L MemoryeMMC Onboard 32GBSDM Standard I/O (1 x HDMI, 1 x DP, 1 x USB3.0,1 x COM)2 x USB2.01 x RJ45, Onboard WiFi/BTSDM-Z8350CPU: x5-Z8350, RAM: 2GB1 x HDMI (SDM I/O), 1 x DP (SDM I/O)1 x COM(SDM I/O),1 x RJ451 x USB3.0 (SDM I/O), 2 x USB2.0eMMC Onboard 32GB Ordering Information
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.§ 15.21 Information to user.Any Changes or modifications not expressly approved by the party responsible for compliance could void theuser's authority to operate the equipment.§ 15.19 Labelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Warning statements: Minumum 20 cm distance must be maintaned between transmitter and users during normal operations

Navigation menu