Jehe Technology Development SDM-S Embedded System User Manual
Shenzhen Jehe Technology Development Co.,Ltd. Embedded System
User manual
Giada SDM-Z8350 Intel® SDM-S Atom Player Features Intel® Cherry Trail Atom Z8350 Processors Onboard 2GB DDR3L Memory eMMC Onboard 32GB SDM Standard I/O (1 x HDMI, 1 x DP, 1 x USB3.0, 1 x COM) 2 x USB2.0 1 x RJ45, Onboard WiFi/BT Core System Mechanical and Environmental CPU Intel® Atom x5-Z8350 Dimensions 109.9mm x 60mm Frequency 1.44 GHz (Up to 1.92 GHz) Power Requirement SDM I/O 12V/2A BIOS AMI Source Code Operation System Windows 8.1/10 (64 Bit)/Android/Linux Chipset SOC Storage Temperature -40 ~ 75°C (-40 ~ 167°F) System Memory DDR3L 1600MHz, Onboard 2 GB Operating Temperature 0 ~ 60°C (32 ~ 140°F) GPU Intel® HD Graphics 400 Relative Humidity 95% @ 60°C(non-condensing) Graphic Engine DirectX11, OpenGL4.0 and OpenCL 1.2 Network Controller Realtek RTL8111F Gigabit Ethernet WiFi+BT on Board RL-SM02BD-8723BS for WIFI+BT Storage eMMC Onboard 32GB JAHC (Patented Tech) WatchDog Timer, Auto Power On, RTC Dimensions and Drawing SDM I/O (PCIe x8 Edge Connector) USB Display Interface Serial Port 1 x USB3.0 1 x HDMI1.4b (Max. 2560 x 1600 @24Hz) 1 x DP1.1a (Max.4096 x 2304 @60Hz) 1 x COM Rear I/O USB 2 x USB2.0 Ethernet 1 x RJ45 Ordering Information SDM-Z8350 CPU: x5-Z8350, RAM: 2GB 1 x HDMI (SDM I/O), 1 x DP (SDM I/O) 1 x COM(SDM I/O),1 x RJ45 1 x USB3.0 (SDM I/O), 2 x USB2.0 eMMC Onboard 32GB The product appearance, specifications and features are subject to change. Giada reserves the right of final interpretation for the content hereinabove. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning statements: Minumum 20 cm distance must be maintaned between transmitter and users during normal operations
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Modify Date : 2018:12:28 10:49:23+08:00 Create Date : 2018:12:25 15:55:37+08:00 Metadata Date : 2018:12:28 10:49:23+08:00 Format : application/pdf Document ID : uuid:41db9347-027e-4a14-acb1-0f44e76ef74c Instance ID : uuid:8722957e-ffa4-4499-8f7d-aafe2a5dc8a3 Page Count : 2EXIF Metadata provided by EXIF.tools