JiangSu HuiTong Group HTMD005A NXP5169 Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4051774
Application ID	QPzWJDhZRVvZkzKbUkd7tA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.06kB (325789 bits)
Date Submitted	2018-10-29 00:00:00
Date Available	2018-10-29 00:00:00
Creation Date	2018-10-17 14:59:44
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-10-29 15:34:49
Document Title	Microsoft Word - 2k18 Zigbee _HTMD-005_ Specifications Datasheet V0.1draft _temp
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclsh47

Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
NXP5169 Module
Specifications Datasheet
Module supports:
Module Part Number:
Module # Module Name
#1
Zigbee NXP 5169 Module
Role
Author
Checked by
Approved by
Date:
<31 July 2018>
Name:
Li Dan
Nick Qiao
Yin Zhi Lin
Classification
Confidential
HT Part Number
HTMD‐005
Appointment:
Design Engineer
PM – R&D
CTO
Version:

Page 1 of 16
remark
Signature:
Status:

Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
Revision History:
Version
Date
(dd/mm/yyyy)
Author
Status
Modifications
V0.1
31/07/2018
Li Dan
Draft
Doc creation
© Jiang Su HuiTong Group Co., Ltd
All rights are reserved. The information presented in this document does not form part of any quotation, is
believed to be accurate and reliable and may be changed without notice. No liability will be accepted by
the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Page 2 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
1 Introduction
1.1 Scope
Module
Module Name
#2
Zigbee NXP5169
Module
HT P/N
HTMD‐005
SOC
JN5169
Standard
Supported
Zigbee 3.0
Bluetooth
Standard
Supported
RF Frequency Interface to Module
Band
Host
Size
 2.4G (2.4 ~
2.5 GHz)
UART
25mm (L) x
16mm(W)
3mm(H)
1.2 Product Features
The JN5169 module provides designers with a ready-made component that provides a fully
integrated solution for applications, using the IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM
frequency band, including ZigBee 3.0 and ZigBee PRO stack with Home Automation, Light Link and
Smart Energy profiles.
The modules integrate all of the RF components required, removing the need to perform
expensive RF design and test. Products can be designed by simply connecting sensors
and switches to the module IO pins. The modules use NXP’s single chip IEEE802.15.4
wireless microcontroller, allowing designers to make use of the extensive chip
development support material. Hence, this range of modules allows designers to bring
wireless applications to market in the minimum time with significantly reduced
development effort and cost.
The JN5169 module is a range of ultra-low power, high performance surface
mount modules targeted at IEEE 802.15.4, ZigBee 3.0 and ZigBee Home Automation,
Light Link and Smart Energy networking applications, enabling users to realize products
with minimum time to market and at the lowest cost. They remove the need for expensive
and lengthy development of custom RF board designs and test suites. The modules use
NXP’s JN5169 wireless microcontroller to provide a comprehensive solution with large
memory, high CPU and radio performance and all RF components included. All that is
required to develop and manufacture wireless control or sensing products is to connect a
power supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
Page 3 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
Features: modules
2.4 GHz IEEE 802.15.4, ZigBee 3.0 and ZigBee PRO stack with Home Automation,
Light Link and Smart Energy compatible
Integrated printed antenna
TX power 14.92dBm
Receiver sensitivity –98 dBm
TX current 27.2 mA at 10 dBm
TX current 23.6 mA at 8.5 dBm
RX current 17.8 mA at maximum input level 10 dBm
RX current 16.2 mA at maximum input level 0 dBm
Features: microcontroller
32-bit RISC CPU; 1 MHz to 32 MHz clock speed
Variable instruction width for high coding efficiency
Multi-stage instruction pipeline
512 kB Flash
32 kB RAM
4 kB EEPROM
Data EEPROM with guaranteed 100 k write operations
2-wire I2C-bus compatible serial interface; can operate as either master or slave
PWM (4 timers, 1 timer/counter)
2 low-power sleep counters
2 UARTs
SPI-bus Master and Slave port, 3 selects
Supply voltage monitor with 8 programmable thresholds
6-input 10-bit ADC, comparator
Battery and temperature sensors
Watchdog and Supply Voltage Monitor (SVM)
Up to 20 Digital IO (DIO) pins
Ambient Conditions:
 Operation Temperature: -10℃ ~ +120℃
 Storage Temperature: -40℃ ~ +85℃
 Operation Humidity: 10 ~ 90% RH
 Storage Humidity: 5 ~ 95% RH
Environmental compliance:
 RoHS compliant
 REACH compliant
Approbation:
 EU/ Russia:
LATAM:

Page 4 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
1.3 Acronyms and abbreviations
BR
EDR
EVM
CCK
Basic Rate
Enhanced Data Rate
Error Vector Magnitude
complementary code keying (CCK),
CE
Conformité Européenne (European Conformity)
DSSS
Direct Sequence Spread Spectrum
EMC
EMF
EIRP
ERP
ETSI
Electromagnetic Compatibility
Electromagnetic Fields, the acronym used for the issue of exposure of
humans to EM-fields and the associated possible adverse health effects
Effective Isotropically Radiated Power
Effective Radiated Power
European Telecommunications Standards Institute
HCI
HT
HT20
HT40
Host Controller Interface
Huitong
High Throughput 20 MHz bandwidth (802.11n/ac)
High Throughput 40 MHz bandwidth (802.11n/ac)
IEC
IEEE
IP
Iperf
International Electrotechnical Commission
Institute of Electrical and Electronics Engineers
Internet Protocol (IP)
Iperf is a commonly used network testing tool that can create Transmission Control
Protocol (TCP) and User Datagram Protocol (UDP) data streams and measure the
throughput of a network that is carrying them, that was developed by the
Distributed Applications Support Team (DAST) at the National Laboratory for
Applied Network Research (NLANR)
ISM
Industrial, Scientific, and Medical
VHT80
VHT160
LE
MAC
MCS
PID
VID
TX
RX
RSSI
TSSI
MIMO
WoWLAN
WoBLE
QoS
EIRP
TCP
Very High High Throughput 80 MHz bandwidth (802.11ac)
Very High Throughput 160 MHz bandwidth (802.11ac)
Low Energy
Media Access Control
Modulation and Coding Scheme
Product ID
Vendor ID
Transmission
Receiver
Received Signal Strength Indicator
Transmit Signal Strength Indicator
Multiple-Input Multiple-Output
Wake on WLAN
Wake up on BLE
Quality-of-Service (QoS)
Equivalent Isotropically Radiated Power
Transmission Control Protocol (TCP)
TCP/IP
Internet Protocol Suite: TCP and Internet Protocol (IP)
TPC
ISM
U-NII
Transmit Power Control
Industrial, Scientific and Medical (2.412GHz~2.484GHz,)
Unlicensed National Information Infrastructure
User Datagram Protocol (UDP) is the set of network protocols used for the
UDP
Page 5 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
VSWR
WiFi
Internet.
Voltage Standing Wave Ratio
Wireless Fidelity
1.4 REFERENCES
1. NXP5169_Data_sheetV1.01.pdf
Page 6 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
2 Technical Specifications
2.1 Absolute Maximum Ratings:
Stresses beyond these conditions listed below may cause permanent damage to the module.
Parameters
Maximum Rating
Power Supply Voltage at +3V3
(-0.3 ~3.63)V
Input voltage to IO pins
(-0.3 ~3.63)V
Storage Temperature Conditions
–40 ℃ ~ +85℃.
Storage Humidity conditions
5% to 95% (RH)
ESD (HBM)
1000V
2.2 Recommended Operation Conditions
Parameters
Operation Conditions
(–10 ℃ ~ +120℃)
Operating Temperature
- No performance reduction up 80°C ambient Temperature
Conditions
- No component failure up to 120°C ambient
Temperature.
Operating Humidity conditions
10% to 90% (RH)
Page 7 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
2.3 Electrical Specifications
Pre-test conditions:
Operation Temperature = room temperature 25°C, unless otherwise noted.
CTQ parameters are marked with *.
Item
Specifications/Requirement
Parameters
Test Conditions
3.3.1
Input power
Test board
3.3.2
Power
standby
mA
3.3.3
consumption
Active
mA
No.
Min
Typ
2.8V 3.3V
Max
Units
3.6V
EN61000-3-2/3-3: ESD
- IEC61000/4/2 : 8kV air
3.3.4
ESD
- ANATEL 442 : 8kV air discharge
Module is mounted into Final
product casing at the designed
No functional failures and
no parts should suffer
damage
location.
2.4 RF Performance
Pre-test conditions:
1) TX power is at typical level, measured at antenna feed point.
2) Front End Insertion loss ( including Balun, impedance mis-match+diplexer):
3) Operation Temperature = room temperature 25°C, unless otherwise noted.
4) CTQ parameters are marked with *.
2.4.1
Zigbee RF Specifications
Item
No.
Parameters
2405 nominal for 1 % PER, as per
2.4.2.1
2.4.2.2
2.4.2.3
Test Conditions
802.15.4
2440 nominal for 1 % PER, as per
receiver sensitivity
802.15.4
2480 nominal for 1 % PER, as per
802.15.4
Page 8 of 16
Specifications/Requirement
Min
Typ
Max
Units
-96
dBm
-96
dBm
-96
dBm
Jiang Su HuiTong Group Co., Ltd
Report No:
CLASSIFIED: Confidential
2.4.2.4
2.4.2.5
Power
2.4.2.6
2405
14.76
dBm
2440
14.92
dBm
2480
-2.31
dBm
2.5 Quality, Environmental and Reliability
S/N
Electrical Test
Requirement
2.5.1 Dry heat Test
2.5.2
2.5.3
2.5.4
TEST CONDITION
Temp. : +70℃
Test time : 96 hrs
Low Temperature Temp. : -25℃
storage
Test time : 96 hrs
Temperature
Temp. : -20℃ ~ +85℃, Duration : 30 min
Shock
Ramp-up & Ramp-down for 5 min, Cycle : 1,000cycle.
Humidity
Load Test
2.5.5 Vibration test
2.5.6 Cold Test
Requirement
4 days
4 days
35 days
Leave samples in 40℃±5℃, 90 ~ 95% RH for
21days,
21 days
and in standard test condition for 30 minutes
10-55-10Hz / amplitude 0.35mm / sweep rate 1
octave per min.
Operational/start up after min 4hrs at -10℃
1 day
1 day
Humidity 93%RH, 6h:temp from 25 ℃ to 40 ℃, 6hrs
2.5.7 Damp heat cyclic
temp 40 ℃ to 25 ℃, 6hrs at 25 ℃, operational last
21 days
hour only for 21 days.
2.5.8
2.5.9
Temperature step
stress test
Operation
Life(MTBF)
Operational up to a temperature of 60 ℃ for 16 days
16 days
Temp. : 60℃, 90% RH, MTBF 50,000 hrs
10 days
3.6 EMC Compliance and Certifications
Page 9 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
Region
Regulation Standards
Requirement
Fulfill CE with official test report at
EU/RU
module level to meet the latest
EMC requirement
Fulfill approbation requirements,
LATAM:
with official test report at Module
level
2.7 Environment Compliance


RoHS compliant
REACH compliant
3 Mechanical Drawing
3.1 Pin define
Page 10 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
3.2 Mechanical Outline and dimensions
Dimension (TOP View)
Page 11 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
Dimension (Side View)
Page 12 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
Dimension (Bottom View)
3.3 Actual Module image
Page 13 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
4 Software
Page 14 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
4.1 MAC Address and Product ID:
Before module is shipped out of Huitong, the following addresses must be flashed into EEPROM
and with clear marking on the product:
No define for current version
5 Key Components
5.1 SOC Chipset
P/N
FREQUENCY BAND：
151727-20
2405 MHz-2480 MHz
MECHANICAL CONFIGURATION：(see next page)
Page 15 of 16
Jiang Su HuiTong Group Co., Ltd
Report No: HTMD-005A
CLASSIFIED: Confidential
6 Marking Information
The sticker on the module contents the following info:
- Type and Version number (on Bottom side, tbc)
- Serial number (on Bottom side, tbc)
- Manufacturing date (on Bottom side, tbc)
- WiFi MAC address (on Bottom side, tbc)
- BT MAC address (on Bottom side, tbc)
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This
equipment should be installed and operated with minimum distance 20cm between the
radiator& your body.
FCC Label Instructions:
The outside of final products that contains this module device must display a label referring to
the enclosed
module. This exterior label can use wording such as: "Contains Transmitter Module
FCC ID: PUW-HTMD005A or Contains FCC ID: PUW-HTMD005A " , Any similar wording that
expresses the same meaning may be used.
Page 16 of 16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : baclsh47
Create Date                     : 2018:10:17 14:59:44+08:00
Modify Date                     : 2018:10:29 15:34:49-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : baclsh47
Title                           : Microsoft Word - 2k18 Zigbee _HTMD-005_ Specifications Datasheet V0.1draft _temp
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:10:29 15:34:49-07:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:ebf35d47-0006-4939-8378-62c703033d45
Instance ID                     : uuid:085d6f7a-fac7-4f00-b1d5-58278389649a
Page Count                      : 16

EXIF Metadata provided by EXIF.tools