Jingneng Telecom Technology Co HK250 Cordless Telephone Base and Handset User Manual HK250 O M

Shenzhen Jingneng Telecom Technology Co Ltd Cordless Telephone Base and Handset HK250 O M

Users Manual Part 4

22BASIC OPERATION (CONTINUED)SAVING CALLER ID INFORMATION TO THE MEMORYThe memory can save the information directly from the caller ID.Scroll through the calls to select anumber as previously described onpage 21. Press the MEMO button.1Enter two digits (01-20) using the keybuttons to assign the desired memorylocation to store the data. One secondafter completing this step, “Save ok”will appear in the display.2CHARACTER MAP CHARTKey 1 press 2 press 3 press 4 press 5 press 6 press 7 press 8 press1 blank & ‘ ( ) * . 12ABC2ABC23DEF3DEF34GHI 4GHI 45JKL5JKL56MNO6MNO67PQRS7PQR8TUV8TUV89WXYZ9WXY0 Space 0 Null 0 Null Space 0 NullDIALING A NUMBER FROM THE MEMORYTo select and dial a number from the memory, follow the steps below:Press the MEMO button while in theStandby mode.1Press the key buttons to enter thememory location or the REVIEW/VOLUME /❷buttons ❶ to locate thenumber you would like to call, thenpress the CID button ❷. The phonenumber will automatically be dialed.1212HK250.O/M.QXD 8/30/02 1:19 PM Page 22
23BASIC OPERATION (CONTINUED)DELETING A NUMBER FROM THE MEMORYDelete a number from the memory as follows:Press the PROG button ❶while in theStandby mode, followed by the MEMObutton ❷.211Enter the two digits (01-20) of thememory location you want to delete. Onesecond after completing this step,“Deleted” will appear in the display forthree seconds and a confirmation tonewill be heard.2Press the MEMO button while in theStandby mode.1When finished, press the PROG button. The VIP indicator in the display will lightand the handset will beep. 25 seconds after pressing the PROG button, thedisplay will clear, a beep will sound and the unit will return to the Standby mode.3Press the key buttons ❶ to enter thememory location or the REVIEW/VOLUME /❷buttons ❷ to locate thenumber you would like to assign apriority VIP ringer to.2212PREFERRED CALLS (VIP)This function allows you to recognize an incoming caller from the ringing sound byassigning a priority VIP ring to the designated number from the memory as follows:HK250.O/M.QXD 8/30/02 1:19 PM Page 23
SYMPTOM SOLUTIONNo dial tone. • Make sure the telephone line cord is connected properly to the modular wall jack.No power on the • Make sure the battery pack is properly connectedhandset. inside the handset.• The handset may need recharging; recharge handset.Handset does not • Make sure the charging contacts on both the base and charge. handset are in contact during charging.• The charging contacts may be dirty; clean with alcohol-moistened cloth.• The battery may need to be replaced.Range is limited. • Move the base so it is centrally located in your residence and make sure the base is not located near an appliance.Call received • The handset may need recharging; recharge handset.flutters or fades.Cannot hear ringer. • Make sure the telephone line cord is connected properly to the modular wall jack.• Make sure RINGER ON/OFF switch is set to theON position.Caller ID information • You must subscribe to Caller ID service.does not appear. • You must let the phone ring twice before answering.Time does not • If you subscribe to Caller ID service, the time and dateautomatically set. will automatically set during the first call.24TROUBLESHOOTING GUIDEIf there was a power failure or if the unit was unplugged, replace the handset to thebase for two to five seconds to reset the system.HK250.O/M.QXD 8/30/02 1:19 PM Page 24
25CARE AND MAINTENANCE1. Clean your phone with a damp (never wet) cloth. Solvent ordetergent should never be used.2. Avoid operating your unit under direct sunlight or in hot, humid ordusty places.3. Keep your unit away from heating appliances.HK250.O/M.QXD 8/30/02 1:19 PM Page 25
26LIMITED WARRANTYEmerson Radio Corp. warrants manufacturing defects in original material, includingoriginal parts and workmanship, under normal use and conditions, for a period ofone year from the date of original purchase in the U.S. With your dated proof ofpurchase, we will provide repair service at no charge for labor and parts at anauthorized Depot Repair Facility, or replace the product in our discretion. Forrepair or replacement, pack your unit in a padded box, enclose your check ormoney order payable to Emerson Radio Corp. in the amount of $9.00 (not requiredby California residents) to cover shipping and handling costs, and enclose a copyof your proof of purchase. Send your unit to:Emerson Radio Corp.1901 Diplomat DriveFarmers Branch, TX 75234This warranty does not cover damage from negligence, misuse, abuse, accident,failure to follow operating instructions, commercial use, rental, repairs by anunauthorized facility, or products purchased, used, serviced or damaged outside ofthe United States.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAYALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.AU898NHK250.O/M.QXD 8/30/02 1:19 PM Page 26
EMERSON PART NO.: 21-2041209-01 Printed in China®HK250.O/M.QXD 8/30/02 1:19 PM Page 27
1976,2002 Sanrio Co. Ltd.CORDLESS TELEPHONEWITH CALLER ID AND 20MEMORY DIALINGOWNER’S MANUALHK250HK250.O/M.QXD 8/30/02 1:19 PM Page 28

Navigation menu