Johnson Controls KONO3 LUX KONO Smart Thermostat User Manual
LUX Products Corporation LUX KONO Smart Thermostat
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3490938 |
| Application ID | 4dwdqQjNRJGZ2S8zWdXVlw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 324.87kB (4060814 bits) |
| Date Submitted | 2017-08-01 00:00:00 |
| Date Available | 2017-08-01 00:00:00 |
| Creation Date | 2017-06-15 10:30:22 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-07-17 17:39:03 |
| Document Title | User Manual |
| Document Creator | Adobe Illustrator CS3 |
Smart THERMOSTAT Installation Manual Thanks for inviting KONOTM into your home. The setup process is easy. All you need to do is follow these simple steps and you’ll be on your way to saving energy and making your home even more comfortable. [Drill] LUX Products offers installation and product videos Please visit LuxProducts.com/videos or visit our YouTube channel LUX Products Corporation. To contact LUX Technical Support please call 856.234.8803. Para ver estas instrucciones en español, por favor visite LuxProducts.com/KONOmanualsSP 1. START HERE What’s in the box? KONO Smart LUX Power BridgeTM Trim Plate Screws Wall Anchors Wiring Labels Phillips Screwdriver Optional: Wire Stripper Tools Needed Drill Smartphone Table of Contents 1. Start Here.......................................................................................2-6 2. Installing with a C-Wire................................................................7-10 3. Installing without a C-Wire.........................................................11-14 4. Connecting to the Network........................................................15-19 5. Appendix....................................................................................20-23 LuxProducts.com | 3 Press the knob when the thermostat is idle to view the menu. Rotate the knob to select an option and press again to confirm. System Mode Installation Settings Fan Mode Network Connection Run Schedule System Preparing For more information about installation settings, please visit LuxProducts.com/KONOmanual Behind KONO’s Décor-snapTM cover you will see a small, removable “quick guide” to installation and an icon-key label. The icons represent the display icons of your KONO Smart. You will also find important information for HomeKitTM and WiFi setup. This manual is a comprehensive guide to installation and wiring. 4 | 856.234.8803 1. START HERE Step 1.1: Download the LUX Products App to your mobile device and create an account. Step 1.2: Now set your phone aside and turn off the power at the circuit breaker to both your heating and cooling systems before performing any wiring. Step 1.3: Confirm that your heating and cooling system is powered down by changing the temperature on your thermostat. Hint: Your system should not make any noise and you should not feel any air exiting your vents. Step 1.4: Remove the front of your old thermostat from its base. If you see thick black wires, wire nuts, or any labels that say 120-240VAC or High Voltage, your system is not compatible with KONO HIGH Smart. Please call LUX Technical Support at VOLTAGE 856.234.8803 before proceeding with your installation. If you do not see any high voltage labels or wires, you can continue with your installation. LuxProducts.com | 5 Step 1.5: Use the included wire labels to mark which wire is connected to each terminal in your old thermostat. Take a picture of your current wiring layout – it may be helpful to reference this picture later. Step 1.6: Confirm if you have a C-Wire. If you do, please turn to the next page. If you do not, please skip ahead to page 11. 6 | 856.234.8803 INSTALLATION WITH 2. C-WIRE Installing with a C-wire STOP Before starting Turn off the power at the circuit breaker to both your heating and cooling systems before performing any wiring. You will not need the included LUX Power Bridge. LuxProducts.com | 7 Installation with C-wire Step 2.1: Identify your system configuration (see wiring diagrams in appendix). Potential configurations include: • Conventional 1H/1C (Y, G, W, R, C) • Conventional 2H/1C (Y, G, W, W2, R, C) • Heat Pump Single-Stage (Y, G, R, O/B, C) • Heat Pump with auxiliary heat or dual fuel (Y, G, R, O/B, W, C) If you have only one R wire, please use the RH terminal. If you have a different configuration other than what is listed above, please call LUX Technical Support for help with your installation. Step 2.2: Remove each wire from its terminal – make sure that they don’t fall down back into the wall. Step 2.3: Remove the mounting screws from the base of the old thermostat. Remove the base from the wall. Step 2.4: If you would like to use the trim plate or wall anchors, you can install them now. Step 2.5: Separate KONO Smart from its base. Pull the wires from your wall through the center hole of the KONO Smart base. Secure the base to the wall using the included mounting hardware. 8 | 856.234.8803 INSTALLATION WITH 2. C-WIRE Option 1 - Conventional (furnace) Systems: Step 2.6f: Following the terminal labels marked “Conventional” on the thermostat base, press the lever and insert each labeled wire into the top hole of the corresponding terminal. CONVENTIONAL HEAT PUMP POWER BRIDGE 1 W1 W2 W1 OB Step 2.7f: If you have both an RC and RH wire present, then remove the red cap next to the reset button. You can now skip ahead to step 2.8. Option 2 - Heat Pump Systems: Step 2.6hp: Following the terminal labels marked “Heat Pump” on the thermostat base and referencing your wiring photo, press the C W1 W2 lever and insert each labeled wire into the top CONVENTIONAL HEAT PUMP C W1 OB POWER BRIDGE 1 4 2 hole of the corresponding terminal. If your old thermostat did not have a W1 wire but did have a W2 wire, please insert the W2 wire into the W1 terminal. Step 2.7hp: If you have both an O wire and a B wire (i.e. in a Trane system), please install the B wire to the “C” terminal. For more detailed directions, please see the wiring diagrams in the appendix or call LUX Technical Support. LuxProducts.com | 9 Installation with C-wire Step 2.8: Securely fasten KONO Smart onto its base. Once it has clicked into place, return power to your heating and cooling system. Step 2.9: After your thermostat powers up, you are ready to configure KONO Smart for your heating and cooling system and connect to a wireless network. Please skip ahead to the “Connecting to the Network” section of this manual on page 15. 10 | 856.234.8803 INSTALLATION WITHOUT 3. C-WIRE Installing without a C-Wire Using the Included LUX Power Bridge 1. Install and wire your KONO 2. Install LUX Power Bridge at your furnace For installation without C-wire, you will need to access your furnace. STOP Before starting Turn off the power at the circuit breaker to both your heating and cooling systems before performing any wiring. LuxProducts.com | 11 Installation without C-wire Hint: helpful videos showing how to wire a thermostat with the LUX Power Bridge are available at LuxProducts.com/videos Step 3.1: Starting at your thermostat, confirm that you have one of the system configurations listed below: • Conventional 1H/1C (Y, G, W, R) • Conventional 2H/1C (Y, G, W1, W2, R) If you have a different configuration other than what is listed above, please call LUX Technical Support for help with your installation. Step 3.2: Remove each wire from its terminal – make sure that they do not fall down back into the wall. Step 3.3: Remove the mounting screws from the base of the old thermostat. Remove the base from the wall. Step 3.4: If you would like to use the trim plate or wall anchors, you can install them now. 12 | 856.234.8803 INSTALLATION WITHOUT 3. C-WIRE Step 3.5: Separate KONO Smart from its base. Pull the wires from your wall through the center hole of the KONO Smart base. Secure the base to the wall using the included mounting hardware. Step 3.6: Following the terminal labels marked “Power Bridge” on the thermostat base, press the lever and insert each labeled wire into the top hole of the corresponding terminal. Connect as follows: • Y Wire Terminal 1 • W Wire Terminal 2 • R Wire Terminal 3 • G Wire Terminal 4 CONVENTIONAL HEAT PUMP POWER BRIDGE 1 W1 W2 W1 OB Step 3.7: Securely fasten KONO Smart onto its base. Step 3.8: Go to your furnace – remove the door or panel and locate your control board or transformer. In most cases, there should be four wires running from the furnace to your thermostat – Y, G, W, and R. If you have additional wires, leave them as is. LuxProducts.com | 13 Step 3.9: i) Matching the letters, label the wires connected to your furnace with the included white Power Bridge wire labels. Take a picture of the wiring at your control board. ii) Disconnect these wires from the control board. iii) Open the Power Bridge and insert each of your old wires into the corresponding numbered terminals in the Power Bridge. iv) Finally, insert the Power Bridge wires (with the colored labels) into the corresponding terminals on your furnace control board. i) Furnace )) (( Furnace iii) iv) Furnace 4( YY GG WW RR CC YYY GGG WW W RRR CCC 3(R) 3(R) 3(R) 3(R) CC 2(W) 2(W) 2(W) 2(W) 4(G) 4(G) 4(G) 4(G) 1(Y) 1(Y) 1(Y) 1(Y) 3(R) 3(R) 4(G) 2(W) 2(W) 2(W) 4(G) 4(G) 1(Y) 1(Y) 1(Y 1(Y) 1(Y) 3(R) YY GG WW RR CC ii) 1(Y) 2(W) 4(G) 3(R) Step 3.10: Secure the LUX Power Bridge to your furnace. If you had to remove a panel or door to access your control panel, replace it now. Step 3.11: Return power to your heating and cooling system. If your system, including your thermostat, does not power up please call LUX Technical Support. After KONO Smart powers up, you are ready to configure it for your heating and cooling system and connect to a wireless network. 14 | 856.234.8803 CONNECTING TO THE 4. NETWORK Connecting to the Network Step 4.1: After your thermostat powers up, it will guide you through the initial system configuration. Use the knob to change options and press the knob to confirm your selection. First you will need to set your system type (F) for Furnace or Boiler (HP) for Heat Pump then then Set the fan type to Gas Set the valve type to O or B – (most common), Electric look at the photo of your wiring (for systems without gas or oil), to see which you have or Boiler (no fan) Note: For advanced settings please visit LuxProducts.com/KONOmanual or call LUX Technical Support. Step 4.2: After confirming your system settings, KONO Smart will ask if you would like to connect to the network. Select “ON” to begin connection or “OFF” to connect later. If you wish to connect, please make sure that you have downloaded the LUX Products App to your smartphone and created an account. Hint: If you are having trouble, please see our instructional video at LuxProducts.com/videos LuxProducts.com | 15 Step 4.3: After selecting “ON”, KONO Smart will display “01”. You will then need to select “iOS” if you are using an Apple® device or “And” if you are using an Android® device. Step 4.4: After selecting “iOS” or “And”, your thermostat will display a large “02”, then “03”. Remove your DécorsnapTM cover. SCALE 1:1 Ex am ple 2D QR-CODE format rules: (The QR-CODE Information (Both QR code & Text including “KONO3” & “DDMMYYV”) KONO3 DDMMYYV QR-COD MUST same as the QR-CODE Label on the PCB) 1. Format: DDMMYYXXXXXX. 2. 1th to 6th digits are the date code, where YY is year, MM is month and DD is day. e.g. 9th Mar. 2015, YY=15(year), MM=03(month), DD=09(day) 3. 7th to 12th digits are the serial number in numeric characters. The serial number should be reset to 000001 for e different date code. e.g. XXXXXX=000001 4. KONO3 and DDMMYYV should be put underneath the 2D QR-CODE, where YY is year, MM is month, DD is day a version of the product which refers to ID_CODE2 in SAP BOM. e.g. 9th Mar. 2015, version of product is A; i.e. DDMMYYV=090315A; Font and font size is Arial 5pt. Example: (For Reference only) COOL ON 123-45-678 WIFI Name: LUX KONO-1a-24 WIFI Password: 12345678 KONO3 260517A HomeKit Code Android WiFi Code Press the knob when the thermostat is idle to view the menu. Rotate the knob to select an 100.0 mm System Mode Fan Mode Network DIMENSIONS INRun MM. GENERALSystem TOLERANCES: LINEAR: +/- 0.2 Schedule Preparing LuxProducts.com/KONOmanual TITLE: HOMEKIT LABEL MODEL: KONO3 P/N: N/A DRAW BY: Dickson Lo / 26 May 2017 APPROVED BY: Joyce Lee / 26 May 2017 FILE: KONO3_ART03A_HOMEKIT_LABEL 16 | 856.234.8803 PAGE: 2 / 2 CONNECTING TO THE 4.NETWORK iOS® (iPhone® or iPad®) Open your LUX App, tap the + icon to add a new accessory, then select the accessory ID that starts with LUX KONO to start the connection process. Follow the instructions in the App. If you need to cancel the joining process at any time, simply press and hold the knob for 5 seconds. Locate your accessory’s HomeKit Code under the Décor-snap cover. When prompted, use your iPhone or iPad’s camera to scan the code. After the App scans the code, your App and thermostat will handle the remaining steps in the connection process. COOL ON When you see the thermostat’s idle screen, it means you are connected. You can now replace the Décor-snap cover. To control this HomeKit-enabled accessory, iOS 10.3 or later is recommended. LuxProducts.com | 17 ANDROID® Open your LUX App, tap the + icon to add a new thermostat. When prompted by the LUX App, please use your phone’s WiFi settings to join your LUX KONO’s WiFi network. The network name and password can be found under the Décor-snap cover. After connecting your thermostat to the network, please return to the App and select your home WiFi network from the list and enter your password. Please make sure your phone reconnects to your home WiFi network and then return to the LUX App. From this point your thermostat and App will handle the remaining steps in the connection process. COOL ON 18 | 856.234.8803 When you see the thermostat’s home screen, it means you are connected. You can now replace the Décor-snap cover. CONNECTING TO THE 4.NETWORK Congratulations! Installation is complete and your KONO is ready to go. Now let’s save some energy and make your home more comfortable. Personalize your KONO Smart. It’s more than a thermostat, it’s décor! Match KONO to your style by simply changing the Décor-snap cover. Check out our wide variety of designer colors and finishes at LUXProducts.com/shopcovers. Hibiscus Red Sea Green Deep Blue Midnight Black Wood Grain LuxProducts.com | 19 Power Bridge Heat Pump Conven onal Conventional System With C-Wire Wiring Diagram Transformer HEAT (STAGE 1) W1 W1 HEAT (STAGE 2) W2 O/B FAN COOL Y1 Y1 RC RC RH RH Thermostat Furnace Notes: • The W2 terminal is used for 2 stage heating systems only • If you have both an RH and RC wire, please remove the red cap from the back of the thermostat 20 | 856.234.8803 5. APPENDIX Power Bridge Heat Pump Conven onal Heat Pump System With C-Wire Wiring Diagram Transformer AUX / EMER Heat W1 W1 CHANGEOVER VALVE W2 O/B FAN COOL Y1 Y1 RC RC RH RH Thermostat Heat Pump Notes: • The W1 terminal is used for Auxiliary/Emergency heat or on Dual Fuel systems LuxProducts.com | 21 Power Bridge LUX Power Bridge Heat Pump Conven onal LUX Power Bridge Wiring Diagram COOL Furnace FAN HEAT (STG 1) TRANSFORMER COMMON HEAT STG2 1(Y) 2(W) 3(R) 4(G) W1 W1 W2 O/B Y1 Y1 RC RC RH RH Thermostat Notes: • If you have a heat pump or dual transformer system, please call LUX Tech support. • If you have any wires on your furnace not shown here, please leave them as is. 22 | 856.234.8803 5. APPENDIX Apple HomeKit™ Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect regulatory standards. Apple is a trademark of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. FCC Part 15C could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to following measures: • Reorient or relocate the receiving antenna. • Consult the dealer or an experienced radio/TV technician for help. Industry Canada Regulatory Information Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. LuxProducts.com | 23 LUX PRODUCTS CORPORATION Philadelphia, PA 19112 USA LuxProducts.com Designed in Philadelphia. 54066
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:16:18 Create Date : 2017:06:15 10:30:22-04:00 Metadata Date : 2017:07:17 17:39:03+08:00 Modify Date : 2017:07:17 17:39:03+08:00 Creator Tool : Adobe Illustrator CS3 Thumbnail Width : 224 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 23782 bytes, use -b option to extract) Instance ID : uuid:87b876ea-9230-da48-8a38-5a70b23eb11d Original Document ID : xmp.did:263810da-9fb5-4437-80a8-f50c4334fb53 Document ID : xmp.id:ccd22306-c425-4fc4-902b-11cd3f752c77 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0a388d1c-4adf-45bd-a119-c1364328e059 Derived From Document ID : xmp.did:ccc37f22-c059-479a-89e2-2fefa823f984 Derived From Original Document ID: xmp.did:263810da-9fb5-4437-80a8-f50c4334fb53 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:06:15 10:30:22-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 133.350000 Max Page Size H : 139.700000 Max Page Size Unit : Millimeters Font Name : Calibri-Italic, Calibri, Calibri-Bold Font Family : Calibri, Calibri, Calibri Font Face : Italic, Regular, Bold Font Type : Open Type, Open Type, Open Type Font Version : Version 5.62, Version 1.02, Version 1.00 Font Composite : False, False, False Font File Name : CALIBRII.TTF, CALIBRI.TTF, Calibri Bold.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 2925 C Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE 2925 C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : LAB Swatch Groups Colorants L : 59.607800 Swatch Groups Colorants A : -17 Swatch Groups Colorants B : -45 Page Count : 24 Language : en-US Creator : Adobe Illustrator CS3EXIF Metadata provided by EXIF.tools