Joongang Telecom JD-LITE DVRs Card User Manual Manual English 2

Download:
Mirror Download [FCC.gov]
Document ID	129940
Application ID	jICzy9BMXJNZKY9S/NzBXQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	295.5kB (3693746 bits)
Date Submitted	2000-12-21 00:00:00
Date Available	2000-12-18 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat PDFWriter 3.02 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	Manual_English_2
Document Creator	Microsoft PowerPoint
Document Author:	Unknown

DVR JD-Lite System
JD-Lite
User’s Manual
Thank you very much for your intelligent selection of DVR JD-Lite System, a digital video recorder system.
You are always assured of the best quality from us.
We expect your valuable patronage.
Yours faithfully,
Management and staffs of
Joongang Telecom
Joongang Telecom Co., Ltd
υ
Copyrights
No part of the software as well as this manual may be reproduced or transmitted in any form or
by any means for any purpose other than the purchaser’s personal use, without the express written
permission of Joongang Telecom Co., Ltd.
Such a violation may be punished.
Copyright, Joongang Telecom Co., Ltd. All rights reserved.
υ
Upgrade and After Sales Service
DVR System and its programs and information contained in this manual is subject to change without
notice to upgrade quality and functions, and does not represent a commitment on the part of Joongang
Telecom Company. You may get a copy of upgraded program and software from Joongang Telecom
Company.
υ
Warranty
1. You shall be given after sales service free of charge during ___ years after buying DVR JD-Lite.
2. You shall be responsible for failures of DVR JD-Lite caused by reasons in the below, and
accordingly shall pay our after sales service even during the warranty period:
1) Careless use and wrong operation;
2) Failures by repairing at your discretion, not by after sales service engineers and/or technicians
of Joongang Telecom.
3. You shall pay our after sales service after expiration of the warranty period.
4. For more information of after sales service, call over phone or visit DVR Business Division of
Joongang Telecom.
5. You are not assured of after sales service against failures of DVR JD-Lite caused by force
majeure.
Windows herein belongs to trademark of Microsoft Company.
υ
Specifications
1. MAIN PROCESSOR : P-II500Mhz or above
2. MAIN BOARD
: ATX Main Board
3. MAIN MEMORY
: 64MByte or above
4. HARD DISK DRIVE
: 15G Byte
5. VGA CARD
: AGP 8 Mbytes or above(Voodoo,Savage chip series)
6. FLOPPY DISK DRIVE : 3.5 inch 1 piece
7. MOUSE
: PS/2 MOUSE
8. KEYBOARD
: 106 Key
9. D.V.R BOARD
: JD-Lite PCI Card
- Camera Input
υ
: 4 Port 75 NTSC/PAL
Before calling After Sales Service department
At first, read this manual carefully to know whether you can repair DVR JD-Lite by yourself.
When you cannot do it, get in touch with DVR Business Division of Joongang Telecom to find out a
good solution after checking details of your problems.
Table of Contents
Chapter 1. Installation and Registration of JD-Lite System
1-1 JD-Lite System Program Installation
1-2 JD-Lite System Card Installation
1-3 JD-Lite System Operation Check
1-4 Setup HDD DMA function.
Chapter 2. JD-Lite LOCAL System Operation
2-1 JD-Lite System Configuration
2-2 Recording Program Menu
2-3 Control Program Menu
2-4 Search Program Menu
2-5 JD-Lite System Functions
Chapter 3. JD-Lire LAN/MODEM System Operation
3-1 Client Images Inquiry
3-2 Server Monitoring
3-3 Server Images Inquiry
3-4 JD-Lite LAN/MODEM System Operation
Chapter 4. Question & Answer of JD-Lite System
Chapter 1.
Installation and Registration of JD-Lite System
1-1 Installation of JD-Lite Program
υ
This manual is based on Windows 98.
So, users of Windows 98 may understand JD-Lite program as well as this manual more easily.
1-1-1 Put No. 1 diskette of JD-Lite
to run program.
JD-Lite
1-1-2 Click “Next” on ‘1-1-1’ screen
to install the system.
JD-Lite
1-1-3 When you finish the installation, icon
of JD-Lite shall be registered on Start
1-1-4 JD-Lite directory shall be automatically
made on your C drive.
menu screen of Windows 98.
JD-Lite
JD-Lite
1-2 JD-Lite System Card Installation
1-2-1 JD-Lite board is a kind of P&P board of PCI way (There exists no jumper). Turn your
computer OFF to open main body. Then, find out empty PCI slot and put the board into it.
1-2-2 Close the main body. Connect BNC cables to necessary ports among 16 camera ports in the
rear of main body. You also connect BNC cable at opposite side to camera.
USB port
Serial port
P/S 2 port
Parallel port
JD-Lite port
External output
system and
sensor port
Video port
Modem port
UTP port
Camera port
1. Camera port : Connect BNC cable of No. 1 ~4 camera. Each port has its own number.
2. External output system and Sensor port : Connect not only cables of No. 1 ~ 4 sensor, but also four (No. 17~20)
of external output system. Each port has its own number.
3. JD-Lite port : Connect four cameras. The port is used when camera port is not used.
4. Serial port : Make use of serial port No. 1 to use Pan/Tilt.
5. Other ports : When you make use of monitor, keyboard, mouse, LAN, modem and so on, you may use other ports.
1-3 JD-Lite System Operation Check
1-3-1 At first, click My Computer icon, and
1-3-2 Make System Registration Information
then click right-hand button of mouse to
window become active. Check that
display menu in the below. Then, click
a controller named ‘Video
registration information.
Capture64[BSR1000]’ has been registered in
‘Sound, Video and Game Controller’.
1-3-4 Make Registration Information
1-3-3 Select ‘Controller’, and then
click Registration Information.
window become active. Then,
a message of ‘The system runs
correctly’ indicates normal installation
of the system.
1-4 Set-up HDD DMA Function
1-4-1 At first, click My Computer icon, and
then click right-hand button of mouse to
1-4-2 After window become active,
Click Disk Drives.
display menu in the below. Then, click
registration information.
1-4-3 Select `GENERIC IDE DISK TYPE`,
Then Click [Properties]
1-3-4 Click [Settings],select DMA.
Then reboot the system to complete set
-up DMA function.
Chapter 2.
JD-Lite Local System Operation
2-1 JD-Lite System Configuration
Recording
program
Control program
Search program
Amount
Setup Mode
Play of saved images
Video
Search Mode
Selection of front and
rear camera
Speed
Full Screen
Image (color)
Rotation (for monitoring)
rear frame
Reserved
Pan/Tilt mode ON/OFF
1 minute before &
Password
Pan/Tilt mode ON/OFF
Movement of front and
Motion
Camera selection (No. 1~4)
after search
Movement to First and Last
Direction (up/down, right/left)
Backup of floppy disk
Camera selection
Update of saved screen
Movement to right-hand &
left-hand limit
Display of hard disk
information
Scaling
Printout
Wide /Narrow
Auto adjustment /Rotation
10
2-2 Recording Program Menu
2-2-1 Pan/Tilt Control Panel of Recording Program
Camera display window for PAN/TILT
PAN/TILT MODE ON/OFF
PAN/TILT POWER ON/OFF
Direction control (up/down & right/left)
Selection of Camera
LEFT LIMIT
RIGHT LIMIT
ZOOM IN
ZOOM OUT
TELE
WIDE
AUTO FOCUS
AUTO ROTATION
1. Camera display window for PAN/TILT: Current camera is to be displayed.
2. PAN/TILT MODE ON/OFF
: ON/OFF of control panel
3. PAN/TILT POWER ON/OFF : ON/OFF of power system of PAN/TILT
4. Direction control
: Adjust camera up/down and right/left.
5. Selection of camera : Select a camera.
6. LEFT LIMIT
: Move camera focus to left end.
7. RIGHT LIMIT : Move camera focus to right end.
8. ZOOM IN
: Make camera focus run Zoom In.
9. ZOOM OUT
: Make camera focus run Zoom Out.
10. TELE
: Make camera focus become narrow.
11. WIDE
: Make camera focus become wide.
12. AUTO FOCUS : Adjust camera focus automatically.
13. AUTO ROTATION : Rotate camera automatically.
11
2-2-2 Main Control Panel of Recording Program
Date & time
display
FULL SCREEN
Display of system operation status
ROTATION
SETUP
SEARCH
POWER
1. Date and time display : Display current date and time.
2. FULL SCREEN : Hide Menu window, and switch monitoring screen to maximum image screen.
3. SETUP : Switch to Set Up mode to set system.
4. Display of system operation status: Movement of blue-colored waveform indicates “Under full recording”, while
that of yellow-colored waveform does “Motion Perceive Recording”.
5. ROTATION : Display only one of selected camera on overall monitoring screen intensively.
6. SEARCH
: Switch to Search mode to run recording screen search, backup, output and so on.
7. POWER
: Push Power button to let Display Level reach 100%, and release the button to turn the system OFF.
2-2-2 Major Screens of Recording Program
(Display not only name of camera but also movement sensing.)
Camera 3 indicates given name of camera by each location, while (M) does
movement of each camera (Motion function).
12
2-3 Control Program Menu
2-3-1 Control Panel of Control Program
MODE and Sub Menu Display
Selection button of Sub Menu
AMOUNT
VIDEO
SPEED
IMAGE
RESERVED
PASSWORD
MOTION
1. MODE and Sub Menu Display : Display not only current mode but also sub menu of selected setup.
2. Selection button of sub menu: The button selects sub menu in the below in sequence. It also selects
sub menu directly.
3. AMOUNT : Switch to sub menu that can adjust number of camera, sensor and external output system.
4. VIDEO : Switch to sub menu that can select recording option of both image signal and video.
5. SPEED : Switch to sub menu that can adjust recording speed.
6. IMAGE : Switch to sub menu that can adjust contrast and brightness of output screen.
7. RESERVED : Switch to sub menu that reserves recording.
8. PASSWORD : Switch to sub menu that changes password of manager.
9. MOTION : Switch to sub menu that sets motion monitoring.
13
Setting time
display
Recording program
switching
Application of
setting time
Camera selection
button
Setting of
current time
1. Setting time display : Display current setting time.
2. Current time setting : Change time at option, while running system.
3. Application of setting time
: After finishing time setting, the set time is to be applied to system.
4. Recording program switching : Return to recording program.
5. Camera selection button : The button selects camera in the case of change of camera name, setting of images
and motion, and other setting of each camera.
2-3-2 Control program - AMOUNT
Number of camera
Number of sensor
(Not this function work at
JD-Lite)
Number of external
output
(Not this function work at
JD-Lite)
Camera name and
Korean
language/English
selection
1. Number of camera : Set number of camera by using Right/Left arrow.
2. Name of camera : Click “Select” of camera at bottom to change name of installed camera, and then input
data with keyboard (Both Korean language and English may be accepted.).
14
2-3-3 Control Program - VIDEO
Camera mode
Recording quality
Resolution
USE FULL
DISPLAY
Storing during search
LIVE SCREEN
Use of external output
1. Camera mode :Both NTSCand PAL are available. In Korea, NTSC has been adopted to set camera mode.
2. Recording quality : The better recording quality, the more storing capacity is needed.
3. Resolution : Currently, resolution mode adopts only 320*240 mode.
4. USE FULL DISPLAY : Screen is to be displayed with maximum frame.
5. Storage option during search : Images of camera in operation are to be saved even during search to delay system
operation speed rather slowly (Not recommending option).
6. LIVE SCREEN : Under operation of PAN/TILT, movement of selected camera is to be displayed in dynamic
image. Warning!: You cannot run recording while selecting Live Screen mode and PAN/TILT. This mode is
currently not to use.
7. Use of external output : Switch screens on Rotate Time mode sequentially, when you make use of independent
A/V Monitor (TV).
15
2-3-4 Control Program - SPEED
Recording frame
Recording frame
setting in the use
of sensor
(Not this function work
at JD-Lite)
SENSOR TIME
(Not this function work
at JD-Lite)
ROTATION
TIME
1. Recording frame
: Adjust recording speed. ( 1-40 FRAME/SEC )
2. ROTATION TIME : When you want to monitor from monitor of main body not by divided screens, by auto
selector, you may set time interval for screen switching.
16
2-3-5 Control Program - IMAGE
BRIGHTNESS
U-GAIN
CONTRAST
V-GAIN
SATURATION
1. BRIGHTNESS : Set monitor mode as well as brightness of recording images.
2. CONTRAST
: Set monitor mode as well as contact of recording images.
3. U-GAIN
: Select red color of 3 primary colors.
4. V-GAIN
: Select green color of 3 primary colors.
5. SATURATION : Select blue color of 3 primary colors.
17
2-3-6 Control Program - RESERVED
Recording day
of the week
Recording camera
SENSOR
(Not this function work
at JD-Lite)
External output
system
(Not this function work
at JD-Lite)
Time Table
1:1
Clear
All Clear
Setting of
hour &
minute
Use Time Table
1. Recording day of the week : Select recording day of the week.
2. Recording camera : Select recording camera among installed cameras.
3. SENSOR : Select sensor for operation among installed sensors. (Not this function work at JD-Lite)
4. External output system : Select a system for operation among installed external output systems. (Not this function
work at JD-Lite)
5. Time Table : Select reserved recording schedule, which you want.
6. 1:1
: Reserve each one set of camera and sensor to one to one of ratio among 16kinds of schedules.
7. CLEAR
: Initialize status of reservation.
8. Setting of time and minute : Set both start time and finish time of reserved recording.
9. Use Time Table : Check use of reservation recording mode. When Use Time Table is not selected, you can do
monitoring by only screen, but cannot save images.
10. Use Time-table select using time table or not(If not selected,display on screen only,does not recording
18
2-3-7 Control Program - Password
ALTERATION
PASSWORD
Input of
password
Password input
button
Input cancel
Application of
password
1. ALTERATION PASSWORD : Check use of password.
2. Input of password : Display input password in type of box.
(Input password is to be displayed in symbol of *.)
3. Input button of password : The button can input a password. Note: Keyboard cannot input a password.
4. Input cancel : Resave original status by clicking Input Cancel.
5. Application of password : Apply input password to your computer.
19
2-3-8 Control Program - MOTION
Delay time of
external output
signal
Use of external
output signal
Alarm speed &
delay time
CREAR
Motion
sensibility
Block setting
display
Motion
Motion block
1. Block setting display : Select a camera by using camera selection button at bottom. Then, place mouse pointer at
the place requiring intensive monitoring, and then click left-hand button of mouse. Click right-hand button of
mouse to release partially.
2. CLEAR : Initialize block.
3. Motion : Select Use of Motion. Select this mode to monitor all of screens.
4. Motion block : Select of Use of Motion Block. Select this mode to set partial block. Otherwise, do not select this
mode to monitor all of screens.
5. Motion sensibility : Select degree of motion sensibility.
6. Delay time of external output signal : Select delay time of signal of external output system.
7. Use of external output signal : Select Use of signal of external output system.
8. Alarm speed and delay time : Select Use of alarm, and speed and time of alarm when monitoring motion.
20
2-4 Search Program Menu
2-4-1 Control Panel of Search Program
Camera display
High speed play
Pause
Reverse play
Play
Previous camera
Next camera
Previous frame
Next frame
Search 1 minute before
Search 1 minute later
Movement to First
Movement to Last
Brightness
Contrast
Brightness/Contrast
Down
Brightness/Contrast
Up
1. Camera display : Name of camera that currently researches
2. High speed play : Play images in high speed.
3. Play
: Play images.
4. Reverse play
: Play images in reverse direction.
5. Pause
: Pause movement of images while playing.
6. Previous camera : A camera before currently selected one.
7. Next camera
: A camera next to currently selected one.
8. Previous frame : Search of images1frame ahead
9. Next frame
: Search of 1frame behind.
10. 1minute before search : Search 1 minute before image.
11. 1minute after search : Search 1minute after image.
12. Movement to First : Move to first image
13. Movement to Last : Move to last image.
14. Brightness
: Adjust brightness of image.
15. Contrast
: Adjust contrast of image.
16. Brightness/Contrast Down : Decrease brightness and contrast.
17. Brightness/Contrast Up : Increase brightness and contrast.
21
Search time display
Search scale
FDD backup
Image update
DISK information
display
Printout
Switching to main
window
1 week later storing
date
Date of image
1 week before
storing date
Setting time
Search time
(hour, minute)
1. Search time display : Current research time of image is to be displayed.
2. Search time (hour, minute) : Search time in hour and/or minute is to be displayed.
3. Input of setting time : Input time is to be displayed.
4. Search scale
: Adjust scale of image to search (maximum: 3 times).
5. FDD backup : Save currently searching images in a diskette.
6. Image update : Update images saved during search.
7. DISK information display : Display current capacity of hard disk.
8. Printout : Printout images with printer.
9. 1 week before storing date : Search an image that was saved 1 week before.
10. 1week later storing date : Search an image that is saved 1 week later.
11. Date of image : Display date when an image exists.
12. Switching to main window : Switch an image to main window.
22
2-4-2 Search Program - BACKUP
DVD backup start time
DVD backup
completion time
N FRAME BACKUP
from current image
BACKUP image type
BACKUP Start
BACKUP
Cancel
DVD VIEW
1. DVD backup start time : Input start time of an image that is to be saved in DVD Disk.
2. DVD backup completion time : Input completion time of an image that is to be saved in DVD Disk.
23
3. FRAME BACKUP from current image : save necessary frame in floppy disk from currently searching images.
4. BACKUP image type : Display image type, for example, BMP and JPG, to be saved.
5. BACKUP start : Start backup.
6. BACKUP cancel : Cancel backup and return to search program.
7. DVD VIEW : Search or delete images saved in DVD DISK.
Screen display
DVD control panel
Brightness/Contrast
Error
Check
Image
delete
All of images
delete
DVD Viewer
completion
Selection of images
Selection of
camera
7-1. ERROR CHECK : Inspect files saved in DVD Disk.
7-2. Image delete
: Delete an image that is selected at search box.
24
7-3. All of images delete : Delete all of images that are saved at search box.
7-4. Screen display
: Search an image that is selected at search box.
7-5. DVD control panel
: Play, delete, output and save images.
A.
REFRESH
: Lists of up-to-date images
B.
BACK
: Move to 1 Frame previous image.
C.
PLAY / BACK PLAY : Play images, or play in reverse direction from end of images.
D.
FORWARD : Move to 1 Frame behind image.
E.
ZOOM IN
F.
ORIGINAL : Reduce size of image to that of before Zoom In.
G.
PRINT
: Printout current image with printer.
H.
SAVE AS
: Save current image in other file name.
I.
: Expand size of current image.
Play Scroll : Play images by using Scroll Bar.
7-6. Brightness / Contrast : Adjust brightness and/or contrast of current image.
Brightness
Default
Contrast
8. DVD Viewer Completion : Complete DVD search, and switch to search program.
25
2-4-3 Search Program - DISK INFO
Image delete
HDD DISK
information
Return to search
program
1. HDD DISK information : Display information on hard disk to show total capacity as well as current occupancy
by figure and graphs.
2. Image delete
: Delete all of saved images.
3. Return to search program : Close hard disk information window, and return to search program.
26
2-4-4 Search Program - PRINT
Printer cancel
Printer set up
N FRAME printout
Printer printout
Printout image name
1. Printout image name : Nominate name of printout image.
2. N FRAME printout : Input number of frame to printout from current image.
3. Printer printout
: Printout images with printer.
4. Printer set up
: Switch to printer set up window to printout details of printer of current system.
5. Printer cancel
: Cancel printing and return to search program.
27
2-5 JD-Lite System Functions
2-5-1 Recording program
1. Common mode
2. Auto switch mode
Save images in recording
program screen.
Click left-hand button of mouse
to switch four cameras to overall
screen and show images. You
can set the switching time by
using speed set up of control
program.
3. Overall screen mode
4. Overall screen auto switch mode
Click
button to switch
to overall screen mode. On the
other hand, click right-hand
button to return to Common
Mode.
Click left-hand button of mouse at
overall screen mode to switch to
overall screen auto switch mode. On
the other hand, click right-hand
button to return to Common Mode.
28
5. Monitoring screen mode
Click
button to switch to
Monitoring Screen mode to fix
Auto Switch mode at a specific
screen.
6. Overall screen monitoring mode
Click right-hand button of mouse at
Monitoring Screen mode to switch
to Overall Screen Monitoring mode.
On the other hand, click right-hand
button to switch to Monitoring
Screen mode.
7. Switch to control and search program at main window
Click
button to switch from Recording Program to Control Program.
29
Click
button to switch from Recording Program to Search Program.
2-5-2 Control Program Functions
1. Selection of number of cameras
4 units of cameras are set at Control Program to display Recording Program saving screen.
8 units of cameras are set at Control Program to display Recording Program saving screen.
2. Change of camera name and languages
1. Change of Camera Name
Select a camera to change, and input its name in
camera name input box.
2. Change of languages
You can select either Korean language or
English at Language Selection box.
30
3. Recording and Resolution
Either NTSC or PAL may be used to select
camera mode (In Korea, NTSC has been adopted.)
Select resolution (Currently, 320*240 mode has
been fixed.)
Image has been displayed with maximum output
frame.
- OPTION 1. Click this option to save images of monitoring camera, even if you search other images at Search
window. Searching may delay operation speed of your system (This option is not recommended.)
2. While you adjust a camera with PAN/TILT, you may watch dynamic image (When you make use of
PAN/TILT after selecting this option, you cannot do recording. Currently, this option is not being used.)
3. This option is used for external A/V monitor. (When you make use of an independent A/V monitor, you
may set sequential switching time on screen.)
4. Recording Speed and Sequential Switching Time
1. Normal Record Speed
You can record up to 40 Frame per second.
(Set up Frame / number of set up camera =
number of saved frame per camera)
2. Sensor Record Speed
You can adjust recording speed for saving
when sensor operates.
3. Sensor Time
You can do recording more as much as Sensor
Time, after sensor operates.
4. Rotation Time
You can set switching time of camera at
camera sequential switching monitoring mode.
31
5. Brightness and Contrast of Monitoring Screen
1. BRIGHTINESS : Track Bar for brightness control (initial value : 50%, Max. : 80%, Min. : 20%)
2. CONTRAST
: Track Bar for contrast control (initial value: 42%, Max.: 80%, Min.: 20%)
3. U-GAIN
: Track Bar for red-color control (initial value: 50%, Max.: 100%, Min.: 0%)
4. V-GAIN
: Track Bar for green-color control (initial value: 50%, Max.: 100%, Min.: 0%)
5. SATURATION : Track Bar for blue-color control (initial value: 50%, Max.: 100%, Min.: 0%)
6. Recording Reservation
1. You can reserve recording by each day of
the week, for example, Monday to Sunday.
2. You can reserve recording of No. 1~16 of
camera.
3. You may set use of No. 1~16 sensor.
4. You may set use of external output system.
5. You may make use of No. 1~16 of
reservation schedule by Select Time Table.
6. You may make use of No. 1~16 of
reservation schedule of both camera and
sensor by using 1:1 mode.
7. You may initialize reserved schedule by
using Clear mode.
32
7. Password
Input of Password
Click ‘ALTERATION PASSWORD’ to let
button become active to input password. Click
the button to input password. Then, click ‘OK’
to display a question message on saving of the
password. Click ‘Yes’ to save the password.
Otherwise, click ‘Clear’ to cancel input of the
password.
[However, this mode shall be applied to only
Control Program-Set Up.]
8. Motion sensibility and Scope Set Up
1. MOTION SENSIBILITY : You can adjust sensibility of motion. High sensibility can check even minor
movement to send alarm and/or signal to external output system. Click Block Box to perceive area that you
want. You can select Block at several areas. If no Block is selected, you may monitor overall screen.
(Motion Sensibility operates only when sensor shaped button turn red-colored lamp ON.)
2. D/O Delay Time : You may set Delay Time to delay signal to external output system, and select external
output system to send a signal.
3. BEEP ON / OFF : Under Motion Sensibility mode, you may set alarm speed and delay time by using Use of
Alarm.
33
2-5-3 Search Program Functions
1. Enlargement of Search Image
Click
button to enlarge images in search 2 to 3 times at Search Program.
2. Backup
Click
button to let Backup window become active. Select number of frame as well as type of image to
save, and then put empty diskette into “A” drive and click ‘OK’ to save. On the other hand, click ‘NO’ to
cancel and make Backup window disappear.
3. Update
Click
button to update additionally saved images.
4. Hard Disk Information and Image Delete
Click
button to let Disk Information (DISK INFO. ) window become active. Blue-colored gauge
identifies current capacity in use, while white-colored gauge does remaining capacity. Click ‘DELETE ALL
IMAGE’ to delete all of saved images of hard disk completely. On the other hand, click ‘OK’ to let DISK
INFO. window disappear.
5. Printer Printout
Click
button to let Printer Printout window become active. Select number of frame to printout, and
click ‘PRINT’ to run printout function after filling out name of images at title box. On the other hand, click
‘CANCEL’ to let Printer Printout window disappear.
You may make correction of detailed information on printer in use by using ‘SETUP’ button. (For more
information, refer to manual of printer manufacturer.)
34
Chapter 3
JD-Lite LAN/MODEM System Operation
* Some functions can not be operated with modem.
3-1 Client Images Inquiry
1. Image display
2. Saved image
date display
3. Image search
and camera
selection
4. Server connection
environment set up
Client Images Inquiry program allows you to inquire images in the past, which were transmitted under OFF-Line
without being connected with server.
1. Image display : Display images of selected camera.
2. Saved image date display : Display circle mark at saved date when selected camera saves image.
3. Image search and camera selection : Select camera for image search by using main control panel. You may play or
delete images of selected camera.
4. Server connection environment set up : You may input server name, IP and telephone number to connect with
server system.
35
3-1-1. Image Display
Camera name
Saved image
date
Saved image
1. Camera name
: Display name of a selected camera..
2. Saved image date : Display save date of image.
3. Saved image
: Display saved image.
3-1-2. Saved image date display
Move to
previous month
Move to next
month
Saved image
display
1. Move to previous month : Move to the month before current search month.
2. Move to next month : Move to the month after current search month.
3. Saved image display : The date saved with an image is to be identified with red-colored circle.
36
3-1-3. Image Search and Camera Selection
Saved image search
Selection button of No.
1~16 camera
Bright/Contrast
Choose
1. Saved Image Search
A.
: Move to initial screen of saved image.
B.
: Move to 1 minute prior screen before image in search.
C.
: Move to previous screen before search
D.
: Play saved image.
F.
: Suspend an image under play.
G.
: Move to a screen following image in search.
H.
: Move to a screen 1 minute after image in search.
I.
: Move to last screen of saved image.
J.
: Delete images in search.
2. Camera selection
: Select a camera to search among No. 1~16 camera.
3. Select Bright/Contrast:Choose Bright and Contrast of Images.
37
3-1-4. Server Connection Environment Set Up
Server list
box/button
Name of server
Address of server
Server password
set up
Server
connection
Delete of server
Add of server
Completion
Additional
application of
server
1. Name of server : Select server to connect server list box to display name of server. Click Server Add button and
input name of server to connect additionally.
2. Address of server : Select a server to connect at server list box, and let server IP address make appearance.
Click Server Add button to input IP address and telephone number to connect with new server.
3. Server password set up : Set password of server to connect.
4. Add of server : Register new server additionally.
5. Additional application of server : Apply input contents with Add of Server button.
6. Delete of server : Delete unnecessary lists among the ones connected to server list box.
7. Server list box : Register lists of server. Click the box with mouse, or select lists of server for connection with
button.
8. Server connection : After selecting a server to connect, click the button to connect with server.
9. Completion : Complete the program.
38
3-2 Server Monitoring
PAN/TILT
manipulation
Monitoring
screen
Current/Stop
Completion
Saving
Image
Search
Server Monitoring program allows you to connect with server by using either LAN or WAN at clients to monitor
current images in real time. You can save monitored images in client PC automatically.
1. Monitoring screen : You can watch monitoring screen as many as number of cameras connected to server in
type of divided screens at clients.
2. Current
: Server receives repeated transmission of images.
3. Stop
: Suspend transmission of images.
4. Search
: Search an image, which has been saved at server by being switched to Server Image Inquiry
program.
5. PAN/TILT : For more information, refer to ‘2-2-1 Recording Program PAN/TILT Control Panel’ of JD-1500
LOCAL System.
6. Completion : Escape to client control program (without connection with server).
7. Saving Image : Save Images of seleted Camera number to Client system.
(When A button clicked, save all images of connected cameras.)
39
3-3 Server Images Inquiry
1. Image display
2. Saved image
date display
3. Image search and
camera selection
4. Image Save/backup/ Output/ Delete
Server Image Inquiry program allows you to connect with server at client by using LAN, WAN or modem to inquire
or delete images at present and in the past.
1. Image display
: Display images of a selected camera.
2. Saved image date display
: Identify date of saved image with circle mark.
3. Image search and camera selection : You may select camera for search by using main control panel of client
program, and can play and delete images of the camera.
4. Image Save/backup/Output/Delete: Save/backup/Output/Delete Past Image from Server.
40
3-3-1. Image Display
Name of
camera
Saved image
date
Saved image
1. Name of camera
: Display name of a selected camera.
2. Saved image date : Identify save date of an image.
3. Saved image
: Display saved image.
3-3-2. Image date display
Move to
previous month
Move to next
month
Image display
1. Move to previous month : Move to the month before current search month.
2. Move to next month : Move to the month after current search month.
3. Image display : Identify save date of image with red-colored circle.
41
3-3-3. Image Search and Camera Selection
Search of saved image
Search time set up
Selection button of No.
1~16 camera
Search time display
1. Search of saved image
A.
: Move to initial screen of save image.
B.
: Move to 1 minute before screen of an image under search.
C.
: Move to previous screen of an image under search.
D.
: Play saved image.
E.
: Suspend an image under play.
F.
: Move to the screen next to an image under search.
G.
: Move to 1 minute after screen of an image under search.
H.
: Move to last screen of saved image.
I.
: Delete images under search.
2. Search time set up : Input time for search among saved images.
3. Search time display : Identify input time at Search Time Set Up.
4. Camera selection
: Select a camera to search among No. 1~16 camera.
( Only 4 cameras can work in JD-Lite S/W )
42
3-3-4. Server Environment Set Up
Saving Image
FDD BACKUP
UPDATE
SITE NAME
Completion of
connection
DISK INFO
PRINT
1. Site Name : Name of Connection server.
2. FDD backup : Save currently searching images in a diskette.
3. Image update : Update images saved during search.
4. DISK information display : Display current capacity of hard disk.
5. Printout : Printout images with printer.
6. Connection completion : Complete connection with server.
7. Saving Image : Save Images of seleted Camera number to Client system.
(When A button clicked, save all images of connected cameras.)
43
3-4 JD-Lite LAN/MODEM System Operation
1. Run JD-Lite LAN/MODEM program.
2. See ‘3-1. Client Images Inquiry’ to know the images that have been saved at client.
3. Select server for connection among lists of ‘Select Site’.
To connect new server additionally, follow operation in order as follows:
A. Click ‘Server Add’ to connect to new server.
B. Fill out site name of new server at ‘Site Name’ box.
C. Fill out IP address of server to let new server make use of LAN at ‘Number’ box. On the other hand, fill out
telephone number for connection to let server to connect to modem.
D. Lastly, click Server Add Application button to register new site at lists of Select Site.
4. Click Server Connection button to connect to server.
5. Connection to server makes Server Monitoring program window become active.
6. Click Search button to check images that have been saved at server.
Click the button to return to Server Images Inquiry screen.
7. Refer to ‘3-4. Client Images Inquiry’ to know images that have been saved at server.
44
Chapter 4
Question & Answer of JD-Lite System
Read carefully following cases to help you solve problems properly and save time.
Q. I am unable to save images.
A. If a waveform, system operation mark of recording program, does not move, or a part or all of cameras has not
been saved despite movement of the waveform, check JD-Lite as follows:
1. Check that number of units being connected to JD-Lite has been properly set up
(See ‘Amount’ of ‘Control Program -Set Up’).
2. Check that you have selected NTSC of camera mode (See ‘Video’ of ‘Control Program-Set Up’.)
3. Check that you have correctly set up amount of camera, and have selected day of the week for recording
(See ‘Reserved’ of Control Program-Set Up).
If you do not run sensor, turn all of sensors OFF, and click column of ‘Use Recording Schedule’ to run recording of
image.
4. Check that you have clicked ‘Area’, and have selected ‘Selection of Motion Sensibility Mode’ as well
as ‘Motion Block’, and have selected ‘Minimum’ of ‘Motion Sensibility Control’
(See ‘Motion’ of Control Program-Set Up.)
Q. I cannot watch overall screen in the use of PAN/TILT.
A. If you are unable to watch overall screen at center of the screen despite clicking PAN/TILT,
take action as follows:
1. Check that you have clicked option of ‘Run Camera PAN/TILT by overall screen’
(See ‘Video’ of Control Program-Set Up.)
Q. Sometimes, I watch broken screen while conducting search.
A. If a part or all of the screen has been broken, take action as follows:
1. Such a phenomenon may occur at different set up of resolution saving between search and saving
(See Video-Control Program - Set Up).
Select ‘DELETE ALL IMAGE’ of ‘DISK INFO.’ (See Search program), and delete all of saved screens,
and check again.
45
Q. Recording program produces not image, but black-colored screen.
A. If an image is not produced, take action as follows:
1. Check that you have selected ‘32 Bit (True Color) of color attributes of Display Registration
(See Control Panel of Windows).
2. Check whether there is an error of ‘Video Capture64[BSR1000]’ of ‘Sound Video and Game Controller’ of system
manager tab (See System Registration of control panel of Windows).
3. If same phenomenon may occur under a circumstance in the above, files of system controller is wrong. So, you are
asked to procure a good program.
46
Q.I have set up Control Program perfectly. But, I cannot run recording.
A. In the case, take action as follows:
1. Sensor may cause such a problem. Turn the sensor OFF (See ‘Reservation’ of Control Program),
and inspect the sensor again.
Q. Images on display produce ‘noise’ similar to lines.
A. If so, take action as follows:
1. Replace camera and lines, which produce noise, with lines of other camera. Then, inspect them again.
2. Video card of the system may cause the problem. Replace your video card, and inspect it again.
3. Monitor may cause the problem. Replace your monitor, and inspect it again.
4. When the problem persists despite your action in the above, contact DVR Business Division of the company.
Q. A failure still occurs despite installation of program once again.
A. Delete your program completely, and then install it again.
1. Delete JD-Lite related program at ‘Add/Delete of Program’ of control panel of Windows.
2. Delete ‘_NDE_’ directory of D drive.
3. Select ‘Execution (R)’ of ‘Start’ button to input ‘REGEDIT’ and run JD-Lite.
4. Delete ‘BaekSANEnterprise’ of ‘SOFTWARE’ directory under ‘HKEY-CURRENT-USER’.
5. Install your program again.
6. When the problem still persists despite your action in the above, contact DVR Business Division of the company.
Q. When time elapses under JD-Lite ON, power system is OFF.
A. Set up all of items of power system control of control panel to be ‘Always turn ON’.
1. Click ‘Power system control’ icon of control panel of Windows.
2. Select ‘Home use/Office use’ of power system configuration.
3. Select ‘Always turn ON’ at System Standby, Monitor OFF, and Hard disk OFF.
Q. I cannot connect JD-Lite LAN/MODEM with server.
A. Check that your network runs under normal status.
1. Fill out ‘COMMAND’ at ‘Execution (R)’ of ‘Start’ button. Then, run JF-Lite.
2. When MS-DOS window becomes active, fill out ‘PING 169.254.0.1’ under prompt ON.
3. Figures following ‘PING’ identifies IP address of server system.
4. When a message of ‘REPLY FROM 169.254.0.1 ….’ makes appearance on screen, your server system runs
under normal status.
47

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 47
Creator                         : Microsoft PowerPoint
Create Date                     : 2000³â 11¿ù 28ÀÏ Tuesday 5:43:23 ¿ÀÈÄ
Title                           : Manual_English_2
Author                          : Unknown
Producer                        : Acrobat PDFWriter 3.02 for Windows
Subject                         : 

EXIF Metadata provided by EXIF.tools