Jorjin Technologies WG6611 WLAN module User Manual 1
Jorjin Technologies Inc. WLAN module 1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3605341 |
| Application ID | m/ohgC+uPwcnIFBksVcqIw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 77.66kB (970714 bits) |
| Date Submitted | 2017-10-16 00:00:00 |
| Date Available | 2017-10-18 00:00:00 |
| Creation Date | 2017-10-13 10:00:36 |
| Producing Software | Microsoft® Word 2013 |
| Document Lastmod | 2017-10-13 10:04:26 |
| Document Title | 1 |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | Hsinwei |
Doc No: WG6611-00-DTS-D08 Index 1. HISTORY CHANGE ....................................................................................................................... 2 2. GENERAL DESCRIPTION ........................................................................................................... 3 3. FUNCTIONAL FEATURES ........................................................................................................... 4 3.1. MODULE BLOCK DIAGRAM .......................................................................................................... 4 3.2. PIN ASSIGNMENT (TOP VIEW) ....................................................................................................... 5 3.3. PIN DESCRIPTION ......................................................................................................................... 6 4. FUNCTIONAL SPECIFICATION ................................................................................................ 7 4.1. TEMPERATURE LIMIT RATINGS ................................................................................................... 10 4.2. DC POWER SUPPLY ............................................................................................................... 10 4.3. CURRENT CONSUMPTION ............................................................................................................11 4.4. WLAN 2.4-GHZ RF PERFORMANCE .......................................................................................... 12 4.5. PIN FUNCTION TABLE ................................................................................................................. 13 5. REFFERENCE SCHEMATIC ...................................................................................................... 14 5.1. APPLICATION REFERENCE CIRCUIT ............................................................................................ 14 6. PACKAGE INFORMATION ......................................................................................................... 15 6.1. MODULE MECHANICAL OUTLINE ................................................................................................ 15 6.2. PACKAGE MARKING ................................................................................................................... 17 7. SMT AND BAKING RECOMMENDATION ............................................................................. 18 7.1. BAKING RECOMMENDATION ...................................................................................................... 18 7.2. SMT RECOMMENDATION ........................................................................................................... 18 Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 1 Doc No: WG6611-00-DTS-D08 1. HISTORY CHANGE Revision D0.1 D0.2 Date 2016-01-13 2016-02-26 Description Initial Document creation. Verify Current Consumption D0.3 D0.4 2016-03-08 2016-03-17 D0.5 2016-06-21 Verify Application Reference Circuit Modify Functional Specification remove Certification 1. Modify Functional Specification increased IPEX Connector 2. Cover modify Series Specifications 3. Modify Module Block Diagram D0.6 2016-09-20 1. Modify Application Reference Circuit 2. Modify pin Description 3. Modify Module Block Diagram D0.7 2016-10-13 1. Remove SDIO Interface 2. Add package marking D0.8 2017-06-29 1. Remove NFC function 2. Modify schematic pin define Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 2 Doc No: WG6611-00-DTS-D08 2. GENERAL DESCRIPTION WG6611-00 is a single chip wireless Internet-of-Things module. The advance Realtek RTL8711AM is a highly integrated single-chip low power 802.11n Wireless LAN (WLAN) network controller. It combines an ARM-Cortex M3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF in a single chip. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different applications and control usage. RTL8711AM integrates internal memories for complete WIFI protocol functions. The embedded memory configuration also provides simple application developments. FEATURES INTRODUCTION Dimension, L x W x H = 22.25 mm x 19mm x2.3mm (Deviation +/-0.1mm) Support IEEE 802.11 b/g/n Standard One Transmit and one Receive path (1T1R) Frequency range: 2.412GHz – 2.484GHz ARM® Cortex®-M3 Core CPU Clock: 166MHz Memory capacity: 512kB of ROM 1MB of Flash 448kB of SRAM Operating Voltage: DC 3.3V Other interface: UART, JTAG, I2S, I2C, SPI, ETE(External Timer Trigger Event),PCM,PWM RoHS Compliant Module is for Client mode & Address point & Router Default is for RF IPEX Connector Antenna Type(1T1R) Gain(dBi): 3.58 Crystal: 40MHz Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 3 Doc No: WG6611-00-DTS-D08 3. FUNCTIONAL FEATURES 3.1. Module Block Diagram Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 4 Doc No: WG6611-00-DTS-D08 3.2. Pin Assignment (Top view) Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 5 Doc No: WG6611-00-DTS-D08 3.3. Pin Description Pin# Name Description Type GND Ground GND Ground NC Not Connected is not used NC Not Connected is not used NC Not Connected is not used NC Not Connected is not used VDDIO(1.8~3.3V) GPIOE, GPIOC, GPIOA, GPIOB group IO power NC Not Connected is not used SWCLK/GPIOE_4 Clock into the core I/O 10 SWDIO/GPIOE_3 SWD data in/out I/O 11 GPIOE_2/PWM2 GPIO Pin, PWM(multiplexing) I/O 12 GPIOE_1/I2C2_SDA/PWM1 GPIO Pin, PWM, I2C(multiplexing) I/O 13 GPIOE_0/I2C2_SCL GPIO Pin, I2C(multiplexing) I/O 14 NC Not Connected is not used 15 ADC_CH2 ADC_CH2,AD converter input 16 NC Not Connected is not used 17 GND Ground 18 CHIP_EN 1: Enable Chip 0: Disable chip in shutdown mode 19 NC Not Connected is not used 20 NC Not Connected is not used 21 NC Not Connected is not used 22 GPIOA_3/UART0_RTS GPIO Pin, UART(multiplexing) 23 NC Not Connected is not used 24 GPIOA_5/UART0_CTS GPIO Pin, UART(multiplexing) I/O 25 GPIOA_7/UART0_TXD GPIO Pin, UART(multiplexing) I/O 26 GPIOA_6/UART0_RXD GPIO Pin, UART(multiplexing) I/O 27 GND Ground 28 NC Not Connected is not used 29 NC Not Connected is not used 30 GND Ground 31 NC Not Connected is not used 32 NC Not Connected is not used Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL I/O Page 6 33 GND Doc No: WG6611-00-DTS-D08 Ground 34 VD33 3.3V Power Supply 35 GND Ground 36 GPIOC_3/SPI0_MISO/I2S1_MCK GPIO Pin, SPI, I2S(multiplexing) I/O 37 GPIOC_2/SPI0_MOSI/ I2S1_SD_TX GPIO Pin, SPI, I2S(multiplexing) I/O 38 GPIOC_1/SPI0_CLK/I2S1_CLK GPIO Pin, SPI, I2S(multiplexing) I/O 39 GPIOC_0/PWM0/I2S1_WS GPIO Pin, PWM, I2S(multiplexing) I/O 40 GPIOC_4/SPI0_CS1/I2S1_SD_RX GPIO Pin, SPI, I2S(multiplexing) I/O 41 GPIOC_5 GPIO Pin I/O 42 GPIOB_3/I2C3_SDA GPIO Pin, I2C(multiplexing) I/O 43 GPIOB_2/I2C3_SCL/NORMAL_MODE_SEL GPIO Pin, /I2C(multiplexing), Shared with GPIOB_2 1:Normal operation 0:Enter into test/debug mode I/O 44 UART_RXD/GPIOB_1 UART_LOG_IN(Debug) I/O 45 UART_LOG_OUT(Debug), Shared with GPIOB_0 0:booting from flash UART_TXD/GPIOB_0/BOOT_SCENARIO I/O 1:booting from internal memory 46 NC Not Connected is not used 47 NC Not Connected is not used 48 GND Ground 49 NC Not Connected is not used 50 NC Not Connected is not used 51 GND Ground 52 GND Ground 53 NC Not Connected is not used 4. FUNCTIONAL SPECIFICATION Main Chipset Realtek RTL8711AM Wireless standard IEEE 802.11 b/g /n Frequency 2.4~2.483GHz ISM Band 802.11b: 11,5.5,2,1 Mbps Transmit Speed 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 150Mbps Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 7 Wireless Security Channel Doc No: WG6611-00-DTS-D08 WPAK2-AES(802.11i(WPA,WP2)) OPEN,shared key,and pair-wise key authentication services Channel 1~14 802.11b(DSSS): CCK(11, 5.5Mbps), DQPSK(2Mbps), DBPSK(1Mbps); Modulation 802.11g(OFDM): BPSK(9,6Mbps), QPSK(18,12Mbps), 16QAM(36,24Mbps), 64QAM(54,48Mbps); 802.11n(OFDM): BPSK, QPSK, 16QAM, 64QAM(150Mbps) 150Mbps: Typical - 64dBm @ 10% PER Sensitivity 54Mbps: Typical - 65dBm @ 10% PER 11Mbps: Typical - 76dBm @ 8% PER 11Mbps: 802.11b 17±2dBm TX Power 54Mbps:802.11g 14±2dBm 150Mbps:802.11n 13±2dBm 11Mbps: 802.11b EVM≦8% EVM 54Mbps:802.11g EVM≦-28dB 150Mbps:802.11n EVM≦-30dB Antenna Network Architecture I/O Voltage Level RF path selection feature -00 : IPEX Connector -01 : Internal Antenna AP Mode (Default) Client Mode Please refer to Table 1 and Table 2 below UART x2 (Maximum 2 high speed UART interface with baud rate up to 4Mbps) I2C x3 (Three speeds: Standard mode(0 to 100 Kb/s) Fast mode(<400Kb/s) High-speed mode(<3.4Mb/s)(with appropriate bus loading) I/O Interface I2S x1 (Support 8/16/24/32/48/96KHz,44.1/88.2KHz) SPI x2 (Support Master/Slave mode(SPI0 only),and Slave only(SPI1 and SPI2); Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 8 Doc No: WG6611-00-DTS-D08 Support DMA to offload CPU bandwidth. 1 very high speed SPI with baud rate up to 41 MHz. 1 high speed SPI with baud rate up to 10MHz). PWM x4 (PWM with configurable duration and duty cycle from 0 ~ 100%) GPIO x19 PCM x2 (Master clock output:64,128,256,or 512kHz) ETE x1 Dimensions 22.25 x 19 x2.3mm Table1-Typeical Digital IO DC Parameters(3.3V Case) Symbol Parameter VIH Input-High-Voltage VIL Input-Low-Voltage VOH Output-High-Voltage VOL Output-Low-Voltage Min Typ. Max 2.0 Units 0.8 2.4 0.4 Table2-Typeical Digital IO DC Parameters(1.8V Case) Symbol Parameter Min VIH Input-High-Voltage 0.65xVcc VIL Input-Low-Voltage VOH Output-High-Voltage VOL Output-Low-Voltage Typ. Max 0.35xVcc Vcc-0.45 Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Units 0.45 Page 9 Doc No: WG6611-00-DTS-D08 4.1. Temperature Limit Ratings Parameter Min. Max. Storage Temperature -40 +80 Units ℃ Operating Temperature +70 ℃ 4.2. DC POWER SUPPLY Symbol Parameter Min Typ. Max Units VDD 3.3V Supply Voltage 3.0 3.3 3.6 VDIO Digital IO Supply Voltage 1.62 1.8~3.3 3.6 Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 10 Doc No: WG6611-00-DTS-D08 4.3. Current Consumption State Current(3.3V) Description Deep Sleep 5.5uA Low Power Timer and GPIO Evnet Wakeup Deep Standby 25uA Low Power Timer and GPIO Evnet Wakeup Sleep 0.5mA Associated with AP but no traffic Associated Idle (DTIM=1) 3.3mA Associated with AP and no traffic Associated Idle (DTIM=2) 2.41mA Associated with AP and no traffic Associated Idle (DTIM=3) 1.985mA Associated with AP and no traffic Run in Active clock 25mA CPU clock 166MHz, UART/SPI/I2C available WiFi is disable 11n RX Mode 62mA 11n TX Throughput @ 13dBm Mode Active: 162mA CPU clock 166MHz, UART/SPI/I2C available WiFi is in 11n Rx CPU clock 166MHz, UART/SPI/I2C available WiFi is in 11n Tx transmitting data(throughput) WiFi is in 11n Rx Condition Typical Current at 3.3V TX at 11 Mbps 343mA TX at 54 Mbps 282mA TX at HT20-MCS7 267mA TX at HT40-MCS7 262mA RX at 11Mbps 68mA RX at 54Mbps 74mA RX at HT20-MCS7 74mA RX at HT40-MCS7 74mA Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 11 Doc No: WG6611-00-DTS-D08 4.4. WLAN 2.4-GHz RF Performance 2.4G WLAN Transmitter Characteristics 11b Output Power 11g Output Power 11n Output Power Condition Min Typ. 11M CCK 17 1M DSSS 17 54M OFDM 14 6M OFDM 16 MCS7 13 MCS0 15 Max Unit dBm 2.4G WLAN Receiver Characteristics 11b Rx Sensitivity 11g Rx Sensitivity 11n Rx Sensitivity Condition Min Tyd 11M CCK -76 1M DSSS -83 54M OFDM -65 6M OFDM -82 MCS7 -64 MCS0 -82 Max Unit dBm Note: IPEX Connector Test RF Performance Measurement Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 12 Doc No: WG6611-00-DTS-D08 4.5. Pin Function Table Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 13 Doc No: WG6611-00-DTS-D08 5. REFFERENCE SCHEMATIC 5.1. Application Reference Circuit Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 14 Doc No: WG6611-00-DTS-D08 6. PACKAGE INFORMATION 6.1. Module mechanical outline Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 15 Doc No: WG6611-00-DTS-D08 Module TOP VIEW Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 16 Doc No: WG6611-00-DTS-D08 6.2. Package Marking Data Code: YYWWSSFA YY = Digit of the year, ex: 2012=12 WW = Week (01~52) SS = Serial number from 01~98 match to MFG’s lot number or 99 to repair control code = Reverse for internal use = Module version from A to Z Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 17 Doc No: WG6611-00-DTS-D08 7. SMT AND BAKING RECOMMENDATION 7.1. Baking Recommendation Baking condition： Follow MSL Level 4 to do baking process. After bag is opened, devices that will be subjected to reflow solder or other high temperature process must be a) Mounted within 72 hours of factory conditions <30°C/60% RH, or b) Stored at <10% RH. - Devices require bake, before mounting, if Humidity Indicator Card reads >10% If baking is required, Devices may be baked for 8 hrs at 125 °C. 7.2. SMT Recommendation Recommended Reflow profile： No. Item Temperature (°C) Time (sec) Pre-heat D1: 140 ~ D2: 200 T1: 80 ~ 120 Soldering D2: = 220 T2: 60 ± 10 Peak-Temp. D3: 250 °C max Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 18 Doc No: WG6611-00-DTS-D08 Note: (1) Reflow soldering is recommended two times maximum. (1) Add Nitrogen while Reflow process： SMT solder ability will be better. Stencil thickness： 0.1~ 0.15 mm (Recommended) Soldering paste (without Pb)： Recommended SENJU N705-GRN3360-K2-V can get better soldering effects. Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 19 Doc No: WG6611-00-DTS-D08 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 20 Doc No: WG6611-00-DTS-D08 This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4Gband by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labelling The final end product must be labelled in a visible area with the following: “Contains FCC ID:WS2-WG6611. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Hsinwei Create Date : 2017:10:13 10:00:36+08:00 Modify Date : 2017:10:13 10:04:26+08:00 Language : zh-TW Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Hsinwei Title : 1 Creator Tool : Microsoft® Word 2013 Metadata Date : 2017:10:13 10:04:26+08:00 Producer : Microsoft® Word 2013 Document ID : uuid:64467175-492d-4d9b-ae7f-4b336592435b Instance ID : uuid:8c71f655-98fe-4b50-87f8-d0c9bcd9f5d9 Page Count : 22EXIF Metadata provided by EXIF.tools