Jujo Electronics 8008 USB Stick Type R/W User Manual USBSTICK E

Shanghai Jujo Electronics Co., Ltd. USB Stick Type R/W USBSTICK E

users manual

USB Stick Type R/WUser ManualJujo Electronics CorporationVersion 2.0All Rights Reserved
2 PageUSER MANUAL .....................................................................................11. PRODUCT FEATURES................................................................ 32. OPERATING ENVIRONMENT.................................................. 52.1 MINIMUM SYSTEM REQUIREMENTS....................................................52.2 SUPPORTING OPERATING SYSTEM.......................................................52.3 NECESSARY SUPPORTS OF USB HOST CONTROLLER............................53. INSTALLATION OF THE DRIVERS......................................... 63.1 INSTALLATION IN WINDOWS98 SE.....................................................63.2 INSTALLATION IN WINDOWS2000 PRO...............................................83.3 OTHERS.........................................................................................104. TROUBLESHOOTING................................................................115. INSTALLATION OF SIM CARD AND NOTES...................... 125.1 DIAGRAM OF USB STICK TYPE R/W...............................................125.2 INSTALLATION OF SIM CARD..........................................................125.3 TAKING OUT OF SIM CARD.............................................................135.4 OTHERS....................................................................................13
3FCC ID: PIT-8008This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.FCC-B Radio Frequency Interference StatementInstruction ManualFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate this equipment.
41. Product FeaturesUSB Stick Type R/W is a novel, small smart SIM Card Reader. It not only provides aneconomic, universal and safe interface for Smart Card and PC users, but also boasts suchfeatures as easy-to-use (Plug and Play), fast transmission speed, small and serviceable. USBStick Type R/W will be widely used in such areas as e-commerce.Main Features Fully compatible with USB1.1 In line with ISO7816 Up to the requirements of Microsoft WHQL USB Smart Card Reader With WDM drivers, can be unfailingly used in various operating systems Small in dimension and convenience in carrying (dimensionHeight 8.2mm, Length58.2mm, Width 17.3mm) Fast transmission speedlow speed 1.5M/sfull speed12M/sNote* WHQL is Windows Hardware Quality Labs * WDM is Windows Driver Model
52. Operating Environment2.1 Minimum system requirements PC/AT or compatible PC (desktop computer or Notebook PC) with USB interface CPU: Pentium® 100MHz200MHz or higher is recommended RAM: 32Mbyte64Mbyte is recommended Hard Disk: 20Mbyte free hard disk space or more2.2 Supporting Operating SystemSupports the following Windows operating environment Windows 98 Windows 98 Second Edition Windows Millennium Edition Windows 2000 Professional (SP1, SP2) Windows 2000 Server Windows XP Home Edition Windows XP Professional2.3 Necessary supports of USB Host ControllerYour computer should have UHCI Universal Hub Controller Interface OHCI Open Host Controller Interface
63. Installation of the driversIt is strongly recommended that you close any application before installing the software. Thefollowing are the installation in Windows98 and Windows2000 Professional.3.1 Installation in Windows98 SE (ME)1 Turn on the power supply to your PC and make sure the computer has connected tointernet. Download the drivers for USB Stick Type R/W from http://jujo-electronics.com/downloads/.2Store the downloaded file in your computer, asC:\desktop\3Double-click the setup.exe and setupclick Next and continue the installation4When the following appears, click Browse and select a folder you like to install theUSB Stick Type R/W Ver2.2, or click Next to use the destination folder.Click Next to begin copying files
75When complete, click Finishthe computer will automatically restart6After restartinginsert USB Stick Type R/W. When the computer found the hardware,you can see [Smart Card Reader] in Device Managerthe following means theinstallation has been successfully completed
83.2 Installation in Windows2000 Pro(XP)1Turn on the supply to the PC and make sure the computer has connected to Internet.Download the drivers for USB Stick Type R/W from http://jujo-electronics.com/downloads/.2Store the downloaded file in some place in your computerasC:\desktop\3Double-click the setup.exe and beging to install the Setupclick Next to continue4When the following appears, click Browse to select a destination folderor just clickNext to use the following folderClick Next to start copying files5After completing the installation, select [Yes, I want to restart my computer now] torestart your computerif you don’t want to restart now, you can select [No, I want torestart my computer later]
96After restartinginsert USB Stick Type R/W, the computer will find the new hardware(as the followingAfter a while, the prompt [Digital Signature Not Found] will appearchoose [yes] tocontinue the installation
107After completing the installation, you will see [Smart Card Reader] in DeviceManagerthe following means the installation has been successfully completed3.3 Others1For the installation in other Windows98 SE versions and Windows MErefers to theinstallation in Windows982 For the installation in Windows2000 Pro and Windows XPrefers to the installationin Windows2000 Pro.3How to removefirst make sure the USB Stick Type R/W has been takenoutchoose “Add/Remove Application” in Control Panel find USB Stick Type R/W in themenu, choose “Remove”
114. Troubleshooting The following table lists the problems that you may encounter and theirsolutions.Problem Cause SolutionWhy can’t you see theUSB device in “DeviceManager”You probably disabled thePlug&Play in BIOS.Restart your computer and press “Del” toenter BOIS select “PnPPCIConfiguration” menu and carefully chectevery item to make sure that “PnP OsInstalled” is “Yes” enable the Plug andPlaychange “Assign IRQ For USB”into“Enable”Why doesn’t myoperating system supportUSB interfaceYou may use Windows95or Windows 3.1orWindows NTSuch systems don’t support USBinterface, you should upgrade youroperating system to Windows98 orhigher Windows operating systemWhy can’t my card readerwork properly suddenlyYou may delete or damagethe installed drivers byaccident.Reinstall the drivers.Why is there a yellowquestion mark orexcalmatory mark beforemy USB SIM CardReader in “DeviceManager”It shows that the USBdevice can’t work probably, you may has not installedthe drivers.Install the drivers.
125. Installation of SIM card andNotes 5.1 Diagram of USB Stick Type R/WFigure 15.2 Installation of SIM Card1 PlanformInstallationhold the front of the SIM Card (with gap upslightly insert the SIM card.Make sure the SIM card should be fully inserted into the base to be fully engaged with it. correct installationFigure 2The following is a false installation: Figure 32 Lateral viewＳＩＭｃａｒｄRope HoleforFaucetＳＩＭ　ｃａｒｄPin HoleＵＳＢ　Ｐｌｕｇ－ｉｎbaseＳＩＭＣａｒｄ
13Figure 43SIM Card should be fully engaged with the base Figure 55.3 Taking out of SIM CardTaking outinsert a pin into the base and slightly push the SIM card outas Figure 6.Figure 65.4 OthersDon’t touch the SIM Card Keep away from magneticbody Keep the temperaturebetween 10 and 60CBaseSIMNot fully insertedinto SIM cardbaseCorrectly insertedPinNot fully insertedinto SIM cardbase
14Figure 7

Navigation menu