Jujo Electronics 8008 USB Stick Type R/W User Manual USBSTICK E

Download:
Mirror Download [FCC.gov]
Document ID	354944
Application ID	WhYcp5X+q+PkX8BkRdOZTw==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.37kB (1117073 bits)
Date Submitted	2003-09-09 00:00:00
Date Available	2003-09-08 00:00:00
Creation Date	2003-09-09 17:08:20
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	USBSTICK-E.PDF
Document Creator	Microsoft Word
Document Author:	jennifer

USB Stick Type R/W
User Manual
Jujo Electronics Corporation
Version 2.0
All Rights Reserved
Page
USER MANUAL .....................................................................................1
1. PRODUCT FEATURES ................................................................ 3
2. OPERATING ENVIRONMENT .................................................. 5
2.1 MINIMUM SYSTEM REQUIREMENTS ....................................................5
2.2 SUPPORTING OPERATING SYSTEM .......................................................5
2.3 NECESSARY SUPPORTS OF USB HOST CONTROLLER ............................5
3. INSTALLATION OF THE DRIVERS......................................... 6
3.1 INSTALLATION IN WINDOWS98 SE.....................................................6
3.2 INSTALLATION IN WINDOWS2000 PRO ...............................................8
3.3 OTHERS .........................................................................................10
4. TROUBLESHOOTING................................................................11
5. INSTALLATION OF SIM CARD AND NOTES...................... 12
5.1
5.2
5.3
5.4
DIAGRAM OF USB S TICK TYPE R/W...............................................12
INSTALLATION OF SIM CARD ..........................................................12
TAKING OUT OF SIM CARD .............................................................13
OTHERS ....................................................................................13
FCC-B Radio Frequency Interference Statement
FCC ID: PIT-8008
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Instruction Manual
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
1. Product Features
USB Stick Type R/W is a novel, small smart SIM Card Reader. It not only provides an
economic, universal and safe interface for Smart Card and PC users, but also boasts such
features as easy-to-use (Plug and Play), fast transmission speed, small and serviceable. USB
Stick Type R/W will be widely used in such areas as e-commerce.
Main Features
Fully compatible with USB1.1
In line with ISO7816
Up to the requirements of Microsoft WHQL USB Smart Card Reader
With WDM drivers, can be unfailingly used in various operating systems
Small in dimension and convenience in carrying (dimension Height 8.2mm, Length
58.2mm, Width 17.3mm)
Fast transmission speed low speed 1.5M/s full speed 12M/s
Note * WHQL is Windows Hardware Quality Labs
* WDM is Windows Driver Model
2. Operating Environment
2.1 Minimum system requirements
PC/AT or compatible PC (desktop computer or Notebook PC) with USB interface
CPU: Pentium® 100MHz
200MHz or higher is recommended
RAM: 32Mbyte 64Mbyte is recommended
Hard Disk: 20Mbyte free hard disk space or more
2.2 Supporting Operating System
Supports the following Windows operating environment
Windows 98
Windows 98 Second Edition
Windows Millennium Edition
Windows 2000 Professional (SP1, SP2)
Windows 2000 Server
Windows XP Home Edition
Windows XP Professional
2.3 Necessary supports of USB Host Controller
Your computer should have
UHCI
Universal Hub Controller Interface
OHCI
Open Host Controller Interface
3. Installation of the drivers
It is strongly recommended that you close any application before installing the software. The
following are the installation in Windows98 and Windows2000 Professional.
3.1 Installation in Windows98 SE (ME)
Turn on the power supply to your PC and make sure the computer has connected to
internet. Download the drivers for USB Stick Type R/W from http://jujoelectronics.com/downloads/.
Store the downloaded file in your computer, as C:\desktop\
Double-click the setup.exe and setup
When the following appears, click Browse and select a folder you like to install the
USB Stick Type R/W Ver2.2, or click Next to use the destination folder.
click Next and continue the installation
Click Next to begin copying files
5
When complete, click Finish the computer will automatically restart
After restarting insert USB Stick Type R/W. When the computer found the hardware,
you can see [Smart Card Reader] in Device Manager the following means the
installation has been successfully completed
3.2 Installation in Windows2000 Pro(XP)
Turn on the supply to the PC and make sure the computer has connected to Internet.
Download the drivers for USB Stick Type R/W from http://jujoelectronics.com/downloads/.
Store the downloaded file in some place in your computer as C:\desktop\
Double-click the setup.exe and beging to install the Setup click Next to continue
When the following appears, click Browse to select a destination folder
Next to use the following folder
or just click
Click Next to start copying files
After completing the installation, select [Yes, I want to restart my computer now] to
restart your computer if you don’t want to restart now, you can select [No, I want to
restart my computer later]
6 After restarting insert USB Stick Type R/W, the computer will find the new hardware
(as the following
After a while, the prompt [Digital Signature Not Found] will appear
continue the installation
choose [yes] to
7
After completing the installation, you will see [Smart Card Reader] in Device
Manager the following means the installation has been successfully completed
3.3 Others
1 For the installation in other Windows98 SE versions and Windows ME refers to the
installation in Windows98
2 For the installation in Windows2000 Pro and Windows XP refers to the installation
in Windows2000 Pro.
3 How to remove first make sure the USB Stick Type R/W has been taken
out choose “Add/Remove Application” in Control Panel find USB Stick Type R/W in the
menu, choose “Remove”
10
4. Troubleshooting
The following table lists the problems that you may encounter and their
solutions .
Problem
Cause
Solution
Why can’t you see the You probably disabled the Restart your computer and press “Del” to
enter
BOIS
select
“PnP PCI
USB device in “Device Plug&Play in BIOS.
Configuration” menu and carefully chect
Manager”
every item to make sure that “PnP Os
Installed” is “Yes” enable the Plug and
Play
change “Assign IRQ For USB”
into“Enable”
Why
doesn’t
my You may use Windows95 Such systems don’t support USB
operating system support or
Windows
3.1 or interface, you should upgrade your
operating system to Windows98 or
USB interface
Windows NT
higher Windows operating system
Why can’t my card reader You may delete or damage Reinstall the drivers.
the installed drivers by
work properly suddenly
accident.
Why is there a yellow
question
mark
or
excalmatory mark before
my USB SIM Card
Reader
in
“Device
Manager”
It shows that the USB Install the drivers.
device can’t work probably
, you may has not installed
the drivers.
11
5. Installation of SIM card and
Notes
5.1 Diagram of USB Stick Type R/W
ＳＩＭ
Rope Hole
ｃａｒｄ
for
ＳＩＭ ｃａｒｄ
ＵＳＢ Ｐｌｕｇ－ｉｎ
Pin Hole
Faucet
Figure 1
5.2 Installation of SIM Card
Planform
Installation hold the front of the SIM Card (with gap up
slightly insert the SIM card.
Make sure the SIM card should be fully inserted into the base to be fully engaged with it.
ＳＩＭ
Ｃａｒｄ
correct installation
base
Figure 2
The following is a false installation:
Figure 3
Lateral view
12
Base
SIM
Figure 4
SIM Card should be fully engaged with the base
Not fully inserted
into
SIM
card
base
Not fully inserted
into
SIM
card
base
Correctly inserted
Figure 5
5.3 Taking out of SIM Card
Taking out insert a pin into the base and slightly push the SIM card out
as Figure 6 .
Pin
Figure 6
5.4 Others
Don’t touch the SIM Card
Keep away from magnetic
body
13
Keep the temperature
between 10 and 60 C
Figure 7
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 14
Creator                         : Microsoft Word
Create Date                     : 2003:09:09 17:08:20
Title                           : USBSTICK-E.PDF
Author                          : jennifer
Producer                        : Acrobat PDFWriter 4.05 for Windows

EXIF Metadata provided by EXIF.tools