Junlan Electronic CHT914C HOME THEATER SPEAKER SYSTEM WITH BLUETOOTH User Manual CHT910

Shenzhen Junlan Electronic Ltd HOME THEATER SPEAKER SYSTEM WITH BLUETOOTH CHT910

user manul

Size: 148.5(W) x 210(H)mm (A5)CONVERTIBLESPEAKER SYSTEMCONVERTIBLESPEAKER SYSTEMModel: CHT914cPLEASE READ BEFORE OPERATING THIS EQUIPMENT.Owner's Manual
IMPORTANT SAFETY INSTRUCTIONSarranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally. This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure it is arranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally. This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure it is
123INSTALLATION34123Method 1: Assemble the main unit and L Speaker together :Left SpeakerSuppliedWooden StandSupplied Metallic Screws and WashersMethod 2: Assemble Main Unit and L Speaker individually : Main unit Left SpeakerSuppliedWooden StandSupplied Metallic Screws and WashersLock the Hook on the rear of leftspeaker to the Main unit as Fig. 4This unit can be assembled as the following methods: This unit can be assembled as the following methods: Main UnitLeft SpeakerDecorative InsertsNote: We supplied total two Wooden Stands and 4 sets Metallic Screws/Washers.Keep the excess accessories in this assembly method for future use.
4The speaker net can be take out and reassembly as the Figure below: +Black wireRed wireMain UnitLeft SpeakerAC 120V~ 60HzSPEAKER +ANTLRAUX IN 1OFFONPOWERAfter above installation, connect the connection wires (Red and Black) from L Speaker to the Speaker Connectors on the rear of Main Unit as the figure below:
(Play/Pause) buttonTUNE - button SOURCE buttonEQ (Equalizer) button IndicatorRemote SensorVOL+ (Volume Up) button / TUNE + buttonVOL- (Volume Down) button AUX IN 1 jacks FM Antenna AUX IN 2 jack MAIN UNITLOCATION OF CONTROLSINDICATOR AUX IN 2EQ SOURCE VOL- VOL+TUNE- TUNE+INDICATOR AUX IN 2EQ SOURCE VOL- VOL+POWERTUNE- TUNE+1245987631011AC 120V~ 60HzSPEAKE R +ANTLRAUX IN 1OFFONPOWERANTLRAU X IN 1OFFONPOWER121314(Power) button POWER ON /OFF switch1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 5
REMOTE CONTROL1. POWER button2. /TUNE - button3. VOL (Volume)+/- buttons4. SOURCE button5. (Mute) button6. / TUNE+ button7. (Play/Pause) button8. EQ (Equalizer) buttonLOCATION OF CONTROLS123456786
%$77(5<35(&$87,216EFFECTIVE DISTANCE OF REMOTE TRANSMITTERApprox.15 feet.BATTERY INSTALLATION--- REMOTE CONTROLRemote Sensor (on the-First Time UseRemove and discard the insulation tab from the battery tray as figure on the right.-Replacing Batteries For Remote Control1. Push and slide out the battery holder as figure 1 below.2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. 3. Close the battery holder.Fig.1 Fig.2 Fig.3front of the main unit)INDICATOR AUX IN 2EQ SOURCE VOL- VOL+POWERTUNE- TUNE+7
GENERAL OPERATIONS1. Insert the plug from AC Power Cord into AC wall outlet having AC 120V~ ; 60Hz.corresponding color as below:4. During Playback:~ Press the VOL (Volume) +/- buttons to adjust volume level as desired.~ Press the EQ button repeatedly to select and set equalizer mode as to Jazz; Pop; Classic or Rock.~ Press the (Mute) button on the Remote Control to turn off the sound. Press again to resume.5. When finished listening, press the Power button to . NOTE: 3. Press the SOURCE button repeatedly to switch to desired mode.The indicator will turn to the as desire. ( .)To reset the EQ to normal mode, power Off then power On the unitturn the unit to Power Off (Standby) mode.If long period of time will not use the unit, shut off the unit by press the POWER ON/OFF switch on the rear of main unit to OFF position from Standby mode.Insert the AC plug into a conveniently located AC outlet having AC 120V~ ; 60Hz.NOTE: The AC plug supplied with the unit is polarized to help minimize the obsolete outlet. possibility of electric shock. If the AC plug dose not fit into a non polarized AC outlet, do not file or cut the wide blade. It is the user's responsibility to have an electrician replacing thePOWER SOURCE~ Purple: AUX IN 1~ Orange: AUX IN 2~ Blue: Bluetooth~ Green: Radio2. Press the Power ON/OFF switch on the rear of the Main Unit to ON position.The Red Indicator will light. Then press the Power button on the Main Unit or Remote Control to power on the unitor unplug the AC Cord from wall outlet. 8
FM AntennaLISTEN TO FM RADIO1. Power ON the unit as previous procedures.2. Press the SOURCE button repeatedly until the color of Indicator changes to Green.4. Repeat the same procedures until the desired radio station is received.NOTE: If the received FM station is in stereo mode, the unit will play it in stereo mode automatically.3. Press and hold the /TUNE - or /TUNE + buttons until the indicator starts blinking. The unit will start to search next (or previous) available FM radio station then plays.The Antenna wire on the rear of Main Unit is for radio reception. If reception is weak, unwind and extend the wire or relocate the wire to improve the radio reception.WhiteRedLISTEN TO TV/DVD/VCR/DVRX IN 1Audio out jacks on TV/DVD/ VCR/DVRDVDAUX IN 1N 14. Press the SOURCE button repeatedly until the color of Indicator changes to Purple.1. Connect one end of supplied RCA audio connection cable to the AUX IN 1 jacks on the rear of the unit as the figure above.2. Connect the other end to the Audio out jacks on the external player (such as Television, VCR, DVD Player, DVR ... etc.).5. Plays the music in the external player as usual. (Make sure the volume output level of the player is in high level. Otherwise, sound from this unit is weak).3. Power ON the unit as previous procedures.LRA UX IN 1AC 120V~ 60HzSPEAKER +ANTLRAUX IN 1OFFONPOWER9
3. Power ON the unit as previous procedures.4. Press the SOURCE button repeatedly until the color of Indicator changes to Orange.1. Connect one end of supplied audio connection cable to the AUX IN 2 jack on the top of the unit2. Connect the other end to the Audio out/Line out/Phone jack on the external player (such like iPod, iPhone, iPad, MP3 Player, Discman... etc.).5. Plays the music in the external player as usual. (Make sure the volume output level of the player is in high level. Otherwise, sound from this unit is weak). as the figure above.LISTEN TO EXTERNAL AUDIO DEVICESINDICATOR AUX IN 2EQ SOURCE VOL- VOL+TUNE- TUNE+INDICATOR AUX IN 2AUX IN 2 jack INDICATOR A UX IN 2EQ SOURCE V OL- VOL+TUNE- TUN E+10
BLUETOOTH PARING AND PLAYBACKNOTES:In first time use, pairing the external BT device as below:A. Power ON the unit as previous procedures, press the SOURCE button repeatedly until the indicator turns to Blue and blinking.B. Power ON the external BT player and enter to searching mode. Start pairing as the on screen instructions on the external BT Player (For details pairing procedures, please refer to the user’s manual of your BT device.).C. When the external BT player searched the Speaker, our model number “CHT914C” will appear on the display of external BT device. Pairing code “0000” may need to enter. 1. Power ON the unit as previous procedures.2. Press the SOURCE button on the unit or remote control until the indicator changes to Blue. 3. Turn on the BT function on the external BT device and play the music as usual. (Make sure the volume level of the external BT device is set to high level).4. During palyback:Press the VOL (Volume) +/- buttons to adjust volume level. Press the / TUNE- or / TUNE + button to skip track. Press the (Play/Pause) button to pause. Press again to resume normal playback.11
&KHFNWKHIROORZLQJVEHIRUHUHTXHVWLQJVHUYLFH6<03720 3266,%/(&$86( 3266,%/(628/7,21TROUBLESHOOTING GUIDEReduce the bass level of the connecteddevicePress the SOURCE button repeatedly to set the input source to the desired modeNo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not paired consumedThe battery is The external device is far fromthe unitVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in payback modeVolume in minimum positionAC plug not connected to the wall outlet Plug to the wall outlet.Raise volume level by pressing the VOL (Volume) + buttonPlay the music/movie in the connected device as usual and make sure the volume level of it is in high levelVOL (Volume ) - buttonReduce the volume level by pressing the Replace with new batteryPut the external BT device close to the unitPair both unit as BT pairing page12
z $FFHVVRULHVGENERAL SPECIFICATIONSPower Source.......................................................................................................... AC 120V ~60HzPower Consumption...................................................................................................................45W1 x User Manual1 x Stereo Audio Connection Cable with 3.5mm stereo plug4 x Assembly Screws / Washers2 x Wooden Bases1 x RCA cableRadio Coverage ...............................................................................................FM 87.5 -108.0 MHImpedance of Speakers:Loud Speakers........................................................................................................ 8 Ohm, 10W x 2Tweeters................................................................................................................... 8 Ohm, 5W x 2Bluetooth Effective Range.............................................................................................Up to 30 feet Remote Effective Range...............................................................................................Up to 15 feet 1 x Remote Control1 x CR 2025 Button Cell (For Remote Control, already installed) (Measured in open area. Wall and structures may affect the effective range.) 13
Size: 148.5(W) x 210(H)mm (A5)Craig warrants this product to be free from manufacturing defects in material andworkmanship under normal use for a period of 90 days from date of purchase. If serviceis required, please return the product to the store where it was purchased for exchange;or, pack the unit in the original packing material with all accessories if applicable, a copyof your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shippingand handling costs) payable to Craig Electronics Inc. For consumers in Canada, pleasemake sure that the cashier check or money order is redeemable through a U.S. bank.Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receiptof your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33169This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.To Obtain Service on your Productemail:service@craigelectronics.comPrinted in China CHT914c_WC_E0CL1_V0USLIMITED WARRANTY
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.　 Increase the separation between the equipment and receiver.　 Connect the equipment into an outlet on a circuit different from that to which the 　receiver is connected. Consult the dealer or an e　xperienced radio/TV technician for help.

Navigation menu