Junlan Electronic CHT914C HOME THEATER SPEAKER SYSTEM WITH BLUETOOTH User Manual CHT910

Download:
Mirror Download [FCC.gov]
Document ID	1971745
Application ID	Xo3OSl9mNpXHaOpayjNRWA==
Document Description	user manul
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	266.96kB (3336993 bits)
Date Submitted	2013-05-23 00:00:00
Date Available	2013-05-23 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	0000-00-00 00:00:00
Document Title	CHT910.cdr
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

CONVERTIBLE
SPEAKER SYSTEM
Owner's Manual
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model: CHT914c
Size: 148.5(W) x 210(H)mm (A5)
IMPORTANT SAFETY INSTRUCTIONS
This unit has a long AC cord and other long cord that can easily be tripped on or pulled on, causing injury. Please make sure
it is arranged so it will not drape over a laptop, etc. Where it can be pulled on by children or tripped over accidentally.
INSTALLATION
This unit can be assembled as the following methods:
Method 1: Assemble the main unit and L Speaker together :
Main Unit
Left Speaker
Supplied
Wooden Stand
Left Speaker
Lock the Hook on the rear of left
speaker to the Main unit as Fig. 4
Supplied Metallic
Screws and Washers
Note: We supplied total two Wooden Stands and 4 sets Metallic Screws/Washers.Keep the
excess accessories in this assembly method for future use.
Method 2: Assemble Main Unit and L Speaker individually :
Main unit
Left Speaker
Supplied
Wooden Stand
Supplied Metallic
Screws and Washers
Decorative Inserts
The speaker net can be take out and reassembly as the Figure below:
After above installation, connect the connection wires (Red and Black) from L Speaker to
the Speaker Connectors on the rear of Main Unit as the figure below:
Black wire
Main Unit
SPEAKER
ANT
Red wire
OFF
AUX IN 1
ON
POWER
AC 120V~ 60Hz
Left Speaker
LOCATION OF CONTROLS
MAIN UNIT
1. Indicator
INDICATOR AUX IN 2
EQ
SOURCE
VOL-
VOL+
TUNE-
TUNE+
2. AUX IN 2 jack
POWER
3. Remote Sensor
4. VOL+ (Volume Up) button
5.
INDICATOR AUX IN 2
11
EQ
SOURCE
VOL-
VOL+
TUNE-
TUNE+
10
/ TUNE + button
6. VOL- (Volume Down) button
7.
TUNE - button
8.
(Play/Pause) button
9. SOURCE button
10.
(Power) button
11. EQ (Equalizer) button
12
13
ANT
OFF
SPEAKER
14
AUX IN 1
ON
POWER
ANT
OFF
AUX IN 1
ON
POWER
AC 120V~ 60Hz
12. FM Antenna
13. AUX IN 1 jacks
14. POWER ON /OFF switch
LOCATION OF CONTROLS
REMOTE CONTROL
1.
POWER button
2.
/TUNE - button
3. VOL (Volume)+/- buttons
4. SOURCE button
5.
(Mute) button
6.
/ TUNE+ button
7.
(Play/Pause) button
8. EQ (Equalizer) button
BATTERY INSTALLATION--- REMOTE CONTROL
-First Time Use
Remove and discard the insulation tab from the battery tray as figure on the right.
-Replacing Batteries For Remote Control
1. Push and slide out the battery holder as figure 1 below.
2. Replace the battery with a new CR2025 button cell as the polarity
markings on the rear of the Remote Control.
3. Close the battery holder.
Fig.1
Fig.2
Fig.3
%$77(5<35(&$87,216
EFFECTIVE DISTANCE OF REMOTE TRANSMITTER
Remote Sensor (on the
front of the main unit)
INDICATOR AUX IN 2
EQ
SOURCE
VOL-
VOL+
TUNE-
TUNE+
POWER
Approx.15 feet
POWER SOURCE
Insert the AC plug into a conveniently located AC outlet having AC 120V~ ; 60Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the
possibility of electric shock. If the AC plug dose not fit into a non polarized
AC outlet, do not file or cut the wide blade. It is the user's responsibility to
have an electrician replacing the obsolete outlet.
GENERAL OPERATIONS
1. Insert the plug from AC Power Cord into AC wall outlet having AC 120V~ ; 60Hz.
2. Press the Power ON/OFF switch on the rear of the Main Unit to ON position.The Red Indicator
will light. Then press the
Power button on the Main Unit or Remote Control to power on the
unit from Standby mode.
3. Press the SOURCE button repeatedly to switch to desired mode.The indicator will turn to the
corresponding color as below:
~ Green:
Radio
~ Blue:
Bluetooth
~ Purple:
AUX IN 1
~ Orange: AUX IN 2
4. During Playback:
~ Press the VOL (Volume) +/- buttons to adjust volume level as desired.
~ Press the EQ button repeatedly to select and set equalizer mode as to Jazz; Pop; Classic or Rock.
as desire. ( To reset the EQ to normal mode, power Off then power On the unit .)
~ Press the (Mute) button on the Remote Control to turn off the sound. Press again to resume.
5. When finished listening, press the
Power button to turn the unit to Power Off
. (Standby) mode.
NOTE:
If long period of time will not use the unit, shut off the unit by press the POWER ON/OFF switch on
the rear of main unit to OFF position or unplug the AC Cord from wall outlet.
LISTEN TO FM RADIO
1. Power ON the unit as previous procedures.
2. Press the SOURCE button repeatedly until the color of Indicator changes to Green.
3. Press and hold the
/TUNE - or
/TUNE + buttons until the indicator starts blinking.
The unit will start to search next (or previous) available FM radio station then plays.
4. Repeat the same procedures until the desired radio station is received.
NOTE: If the received FM station is in stereo mode, the unit will play it in stereo mode automatically.
FM Antenna
The Antenna wire on the rear of Main Unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
LISTEN TO TV/DVD/VCR/DVR
Red
N1
X IN 1
Audio out jacks on
TV/DVD/ VCR/DVR
SPEAKER
ANT
OFF
AUX IN 1
ON
POWER
A UXAUX
IN 1 IN 1
White
AC 120V~ 60Hz
DVD
1. Connect one end of supplied RCA audio connection cable to the AUX IN 1 jacks on the rear
of the unit as the figure above.
2. Connect the other end to the Audio out jacks on the external player (such as Television, VCR, DVD
Player, DVR ... etc.).
3. Power ON the unit as previous procedures.
4. Press the SOURCE button repeatedly until the color of Indicator changes to Purple.
5. Plays the music in the external player as usual. (Make sure the volume output level of the player is
in high level. Otherwise, sound from this unit is weak).
LISTEN TO EXTERNAL AUDIO DEVICES
INDICATOR AUX IN 2
AUX IN 2 jack
EQ
SOURCE
VOL-
VOL+
TUNE-
TUNE+
INDICATOR AUX IN 2
INDICATOR AUX IN 2
EQ
SOURCE
VOL-
VOL+
TUNE-
TUNE+
1. Connect one end of supplied audio connection cable to the AUX IN 2 jack on the top of the unit
as the figure above.
2. Connect the other end to the Audio out/Line out/Phone jack on the external player (such like iPod,
iPhone, iPad, MP3 Player, Discman... etc.).
3. Power ON the unit as previous procedures.
4. Press the SOURCE button repeatedly until the color of Indicator changes to Orange.
5. Plays the music in the external player as usual. (Make sure the volume output level of the player
is in high level. Otherwise, sound from this unit is weak).
10
BLUETOOTH PARING AND PLAYBACK
1. Power ON the unit as previous procedures.
2. Press the SOURCE button on the unit or remote control until the indicator changes to Blue.
3. Turn on the BT function on the external BT device and play the music as usual. (Make sure
the volume level of the external BT device is set to high level).
4. During palyback:
Press the VOL (Volume) +/- buttons to adjust volume level.
Press the
/ TUNE- or
/ TUNE + button to skip track.
Press the (Play/Pause) button to pause. Press again to resume normal playback.
NOTES:
In first time use, pairing the external BT device as below:
A. Power ON the unit as previous procedures, press the SOURCE button repeatedly until the
indicator turns to Blue and blinking.
B. Power ON the external BT player and enter to searching mode. Start pairing as the on screen
instructions on the external BT Player (For details pairing procedures, please refer to the user’s
manual of your BT device.).
C. When the external BT player searched the Speaker, our model number “CHT914C” will appear on
the display of external BT device. Pairing code “0000” may need to enter.
11
TROUBLESHOOTING GUIDE
&KHFNWKHIROORZLQJVEHIRUHUHTXHVWLQJVHUYLFH
6<03720
3266,%/(&$86(
3266,%/(628/7,21
No power
AC plug not connected to the
wall outlet
Plug to the wall outlet.
Volume in minimum position
Raise volume level by pressing the VOL
(Volume) + button
The connected device is not
in payback mode
Play the music/movie in the connected
device as usual and make sure the
volume level of it is in high level
Input source incorrect
Press the SOURCE button repeatedly to
set the input source to the desired mode
Bass level of the connected
device too high
Reduce the bass level of the connected
device
Volume level too high
Reduce the volume level by pressing
the VOL (Volume ) - button
The battery is consumed
Replace with new battery
No sound
Sound distortion
Remote not
working
Bluetooth
reception failure
The external device is far from
the unit
Put the external BT device close to the
unit
Pair both unit as BT pairing page
Have not paired
12
GENERAL SPECIFICATIONS
Power Source.......................................................................................................... AC 120V ~60Hz
Power Consumption...................................................................................................................45W
Radio Coverage ...............................................................................................FM 87.5 -108.0 MH z
Impedance of Speakers:
Loud Speakers........................................................................................................ 8 Ohm, 10W x 2
Tweeters................................................................................................................... 8 Ohm, 5W x 2
Bluetooth Effective Range.............................................................................................Up to 30 feet
(Measured in open area. Wall and structures may affect the effective range.)
Remote Effective Range...............................................................................................Up to 15 feet
$FFHVVRULHV
1 x User Manual
1 x Remote Control
1 x CR 2025 Button Cell (For Remote Control, already installed)
1 x Stereo Audio Connection Cable with 3.5mm stereo plug
1 x RCA cable
4 x Assembly Screws / Washers
2 x Wooden Bases
13
LIMITED WARRANTY
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
To Obtain Service on your Product
email:service@craigelectronics.com
Printed in China
CHT914c_WC_E0CL1_V0US
Size: 148.5(W) x 210(H)mm (A5)
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creation Date--Text             : 
Mod Date--Text                  : 
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2013:02:25 14:59:48+08:00
Modify Date                     : 2013:05:20 09:15:56+08:00
Metadata Date                   : 2013:05:20 09:15:56+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Thumbnail Width                 : 160
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10645 bytes, use -b option to extract)
Document ID                     : uuid:79766FE9187FE21188D1CA72A52555BB
Instance ID                     : uuid:b0405d1d-2ca5-42ea-ad6b-dc9e69df378a
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:3340d24b-d14b-4906-9ba8-073e77f5ff7d
Derived From Document ID        : uuid:cb39e346-47d6-479b-b32d-df1ba4edad9c
Format                          : application/pdf
Creator                         : Administrator
Title                           : CHT910.cdr
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 148.000096
Max Page Size H                 : 210.000274
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, FranklinGothic-Medium
Font Family                     : Arial, Franklin Gothic Medium
Font Face                       : Regular, Regular
Font Type                       : Open Type, Open Type
Font Version                    : Version 3.00, Version 2.20
Font Composite                  : False, False
Font File Name                  : ARIAL.TTF, Framd.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Has XFA                         : No
Page Count                      : 16
Author                          : Administrator

EXIF Metadata provided by EXIF.tools