Junlan Electronic JSB200 Wall Mountable 2.0-Channel Bluetooth Soundbar Speaker User Manual BT0218MO English manual

Shenzhen Junlan Electronic Ltd Wall Mountable 2.0-Channel Bluetooth Soundbar Speaker BT0218MO English manual

Users manual

MODEL: JSB-200Please read this instruction manual carefully and keep it for future reference.BLUETOOTH SOUNDBAR SYSTEMINSTRUCTION MANUAL
3AC/DC adapterTo the DC IN jack on the rear of unit.to the wall outlet having AC 100-240V~, 50/60 Hz.Insert the small plug from supplied AC/DC adaptor to DC IN jack on the rear of the unit and insert the AC/DC adaptor NOTE:This AC/DC adapter is intended to be correctly operated in a vented indoor wall outlet. VentilationWhen placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard.1. Placing the device on table
MOUNTING We recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall.1. Mark the position of the mounting screws on the wall using a pencil.2. Drill the supplied screws directly into the marks that you have made on the wall  3. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.1. Mark the position of the mounting screws on the wall using a pencil.3. Insert the supplied plastic inserts into the holes by hammer.5. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.(1) (2)2.2 Mounting on the wooden wall:Holes distance:25.9 inchessupplied Metallic Bracketsupplied ScrewsHoles distance:25.9 inchessupplied Screwsin same horizontal levelsupplied Screwssupplied Metallic Bracketsupplied Plastic InsertsDrill holes by powerful electrical drill. supplied Metallic Bracketsupplied Plastic Insertssupplied Screwssupplied Metallic Bracket2. Drill holes by a powerful electric drill( Not supplied )( Drill head diameter:6.0 mm ).4. Secure the supplied screws into the plastic inserts with the Metallic Bracket.with the Metallic Bracket as the figure above.2. Mounting the device on wall1. Mounting the device on wooden wallin same horizontal level425.9 inches
5                        105.6Front View Back ViewPRODUCT OVERVIEWAUX-IN 1 jacksDC IN jackSide ViewAUX-IN 2 JackPOWER/SOURCEVOLUME + SUBWOOFER OUT jackVOLUME -
PAIRSTANDBY6                                           BATTERY INSTALLATIONSTALLATION- Before installation                             Remove and discard the insulation tab.  Out of the box the Remote Control has a battery and will be usable after the tab is removed.      -Replace battery for the remote control                1. Push and slide out the battery holder as Figure 1 below. 2. Replace the battery with a new CR2025 button cell with the polarity (+)     side upward.3. Slide into the battery holder.         BATTERY PRECAUSIONS• Never recharge the batteries, apply heat to them or take them apart.• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.• Do not throw the batteries in fire!• Attention should be drawn to the environmental aspects of battery disposal.• If the remote control is not going to be used for a long time, remove the battery  to avoid damage caused by battery leakage corrosion.                                                           POWER CONTROL- To turn the unit on• Connect the supplied AC/DC adapter. • Press STANDBY button to turn on the unit.- To turn the unit off• Press STANDBY button on the remote control or hold STANDBY button in   the right side of the unit. NOTE:If the unit is not used for a long period of time, disconnect the AC/DC adapter.123456789101112131. STANDBY6.      7.     ( play/pause )10. BASS +4. BASS-8.      (mute)14.       13. EQ ( Equalizer )2. VOL- ( volume down )5. TREBLE-9. VOL+ ( volume up )3. SOURCE12. TREBLE +REMOTE CONTROL1411. PAIR
- RCA AUX IN sources may include •TV/DVD/VCR - RCA AUX IN connection1. Connect the RCA audio cable (supplied) to the audio output jack on DVD      player and AUX 1 or AUX 2 jack on the rear of DVD.2. Press SOURCE button repeatedly until the indictaor turns green.-During playback •Press MUTE button to turn off the sound. Press again to resume the sound.•Press VOLUME+/- buttons to adjust the volume level.•Press BASS+/- buttons to adjust bass level.•Press TREBLE+/-buttons to adjust treble level.•Press EQ button to switch between 7AUX-IN 1 CONNECTIONWhiteRedJAZZ/POP/CLAS/ROCK/NORM.
- AUX IN source may include:•Personal audio players•Personal computers or laptops - AUX IN connection:1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or      LINE/Audio output of the personal audio player and the AUX-IN 2 jack on theright side of the unit.2. Power on the unit and press SOURCE button repeatedly unSet your personal audio player/computer to play. NOTE: If there is no sound or if the volume is not loud enough, you may              increase the setting on the source. -During playback •Press MUTE button to turn off the sound. Press again to resume the sound.  •Press VOLUME+/- buttons to adjust the volume level.•Press BASS+/- buttons to adjust bass level.•Press TREBLE+/-buttons to adjust treble level.•Press EQ button to switch between Connect to the outputsocket of externalaudio devices (Mp3,Computer, ext.)8AUX-IN 2 CONNECTIONtil the indicator turns orange.To AUX IN Jackon the unitJAZZ/POP/CLAS/ROCK/NORM.SUBWOOFER CONNECTIONSubwoofer connection source may include:Amplifiers and other devices with audio input jackConnect the RCA cable with the subwoofer out jack, and another end of RCA cable to the audio in jack of amplifiers or other devices.
1. Press SOURCE button repeatedly to enter BT mode. The indicator is blue.2. Turn off the Bluetooth functionality of other devices that are paired with your     unit.  Only one device can be used with the Bluetooth function at a time.3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth      controls are found on the device’s tools or settings menu (see your user manual).      Turn on Bluetooth connectivity and make your device “discoverable”.4. Choose “add a new Bluetooth device”or “setup Bluetooth device”on your device.     It will start to search. Once “ ”shows on your device, select it. If your     device prompts you for a pass code, please enter"0000". If the pairing attempt     fails or times out, please start pairing procedure again.5. After your device and the “ ”have connected each other, a sound     can be heard.NOTE: The unit will automatically reconnect the last paired device when Bluetooth mode is reselected from other mode. If for some reason the Bluetooth connection is lost due to external factors or will not auto reconnect, you process again.Make sure the Bluetooth connection between the unit and the device is activated.•Press  b utton to suspend momentarily the playing track. Press  again to resume playing. •Press     button to skip forward to the next track and    button to  skip backward to the previous track. •Press MUTE button to turn off the sound. Press again to resume the sound.  •Press VOLUME +/- buttons to adjust the volume level.•Press BASS +/- buttons to adjust bass level.•Press TREBLE +/- buttons to adjust treble level.•Press EQ button to switch between 9must clear the "                  " from your Blue Tooth device list and begin the paring-During playback-PairingBLUETOOTH"0000"JSB-200JSB-200JSB-200Press PAIR button on remote control to disconnect the current connection of the unitwith the external device.JAZZ/POP/CLAS/ROCK/NORM.
&KHFNWKHIROORZLQJVEHIRUHUHTXHVWLQJVHUYLFH6<03720 3266,%/(&$86( 3266,%/(628/7,21TROUBLESHOOTING GUIDEReduce the bass level of the connecteddevicePress the SOURCE button repeatedly to set the input source to the desired modeNo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not paired consumedThe battery is    The external device is far fromthe unitVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in payback modeVolume in minimum positionAC plug not connected to the      wall outlet Plug to the wall outlet.Raise volume level by pressing the VOL (Volume) + buttonPlay the music/movie in the connected device as usual and make sure the volume level of it is in high levelVOL (Volume ) -  buttonReduce the volume level by pressing the  Replace with new batteryPut the external BT device close to the unitPair both unit as BT pairing page10
Power source of the remote control..................DC 3V, 1x CR 2025 button cellOutput of the power adapter.................................................. DC  16V,1.8 AAudio output.......................................................................................2x10 W Power consumption.............................................................................25 WBluetooth working range.......................................................................10M1 x Instruction manual1 x Remote control1 x CR 2025 button cell (Already installed in the remote control) 1 x Stereo audio connection cable with 3.5mm stereo plug11ACCESSORIESGENERAL SPECIFICATIONS1 x RCA audio cable1 x Adapter4 x Screws ( For wall mounting )4 x Wall plugs ( For wall mounting )2 x Metal brackets ( For wall mounting )Subwoofer frequency................................................................................80-150HzSubwoofer level........................................................................................1V ( max )
                                                         FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that maycause undesired operation.Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.  Consult the dealer or an experienced radio/TV technician for help.

Navigation menu