Junlan Electronic JSB200 Wall Mountable 2.0-Channel Bluetooth Soundbar Speaker User Manual BT0218MO English manual
Shenzhen Junlan Electronic Ltd Wall Mountable 2.0-Channel Bluetooth Soundbar Speaker BT0218MO English manual
Users manual
MODEL: JSB-200
Please read this instruction manual carefully and keep it for future reference.
BLUETOOTH SOUNDBAR SYSTEM
INSTRUCTION MANUAL
3
AC/DC adapter
To the DC IN jack on the rear of unit.
to the wall outlet having AC 100-240V~, 50/60 Hz.
Insert the small plug from supplied AC/DC adaptor to DC IN jack
on the rear of the unit and insert the AC/DC adaptor
NOTE:This AC/DC adapter is intended to be
correctly operated in a vented indoor wall outlet.
Ventilation
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar
for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat
generated from the Sound Bar could produce a potential heat hazard.
1. Placing the device on table
MOUNTING
We recommend having this speaker professionally mounted. By using the included
wall mounting accessories, the sound bar can be mounted onto a wall.
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill the supplied screws directly into the marks that you have made on the wall
3. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.
1. Mark the position of the mounting screws on the wall using a pencil.
3. Insert the supplied plastic inserts into the holes by hammer.
5. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.
(1) (2)
2.2 Mounting on the wooden wall:
Holes distance:25.9 inches
supplied Metallic Bracket
supplied Screws
Holes distance:25.9 inches
supplied Screws
in same horizontal level
supplied Screws
supplied Metallic Bracket
supplied Plastic Inserts
Drill holes by powerful electrical drill. supplied Metallic Bracket
supplied Plastic Inserts
supplied Screws
supplied Metallic Bracket
2. Drill holes by a powerful electric drill( Not supplied )( Drill head diameter:6.0 mm ).
4. Secure the supplied screws into the plastic inserts with the Metallic Bracket.
with the Metallic Bracket as the figure above.
2. Mounting the device on wall
1. Mounting the device on wooden wall
in same horizontal level
4
25.9 inches
5
105.6
Front View
Back View
PRODUCT OVERVIEW
AUX-IN 1 jacks
DC IN jack
Side View
AUX-IN 2 Jack
POWER/SOURCE
VOLUME +
SUBWOOFER OUT jack
VOLUME -
PAIR
STANDBY
6
BATTERY INSTALLATION
STALLATION
- Before installation
Remove and discard the insulation tab. Out of the box the Remote Control
has a battery and will be usable after the tab is removed.
-Replace battery for the remote control
1. Push and slide out the battery holder as Figure 1 below.
2. Replace the battery with a new CR2025 button cell with the polarity (+)
side upward.
3. Slide into the battery holder.
BATTERY PRECAUSIONS
• Never recharge the batteries, apply heat to them or take them apart.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not throw the batteries in fire!
• Attention should be drawn to the environmental aspects of battery disposal.
• If the remote control is not going to be used for a long time, remove the battery
to avoid damage caused by battery leakage corrosion.
POWER CONTROL
- To turn the unit on
• Connect the supplied AC/DC adapter.
• Press STANDBY button to turn on the unit.
- To turn the unit off
• Press STANDBY button on the remote control or hold STANDBY button in
the right side of the unit.
NOTE:
If the unit is not used for a long period of time, disconnect the AC/DC adapter.
1
2
3
4
5
6
7
8
9
10
11
12
13
1. STANDBY
6.
7. ( play/pause )
10. BASS +
4. BASS-
8. (mute)
14.
13. EQ ( Equalizer )
2. VOL- ( volume down )
5. TREBLE-
9. VOL+ ( volume up )
3. SOURCE
12. TREBLE +
REMOTE CONTROL
14
11. PAIR
- RCA AUX IN sources may include
•TV/DVD/VCR
- RCA AUX IN connection
1. Connect the RCA audio cable (supplied) to the audio output jack on DVD
player and AUX 1 or AUX 2 jack on the rear of DVD.
2. Press SOURCE button repeatedly until the indictaor turns green.
-During playback
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME+/- buttons to adjust the volume level.
•Press BASS+/- buttons to adjust bass level.
•Press TREBLE+/-buttons to adjust treble level.
•Press EQ button to switch between
7
AUX-IN 1 CONNECTION
White
Red
JAZZ/POP/CLAS/ROCK/NORM.
- AUX IN source may include:
•Personal audio players
•Personal computers or laptops
- AUX IN connection:
1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or
LINE/Audio output of the personal audio player and the AUX-IN 2 jack on the
right side of the unit.
2. Power on the unit and press SOURCE button repeatedly un
Set your personal audio player/computer to play.
NOTE: If there is no sound or if the volume is not loud enough, you may
increase the setting on the source.
-During playback
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME+/- buttons to adjust the volume level.
•Press BASS+/- buttons to adjust bass level.
•Press TREBLE+/-buttons to adjust treble level.
•Press EQ button to switch between
Connect to the output
socket of external
audio devices (Mp3,
Computer, ext.)
8
AUX-IN 2 CONNECTION
til the indicator
turns orange.
To AUX IN Jack
on the unit
JAZZ/POP/CLAS/ROCK/NORM.
SUBWOOFER CONNECTION
Subwoofer connection source may include:
Amplifiers and other devices with audio input jack
Connect the RCA cable with the subwoofer out jack, and another end of
RCA cable to the audio in jack of amplifiers or other devices.
1. Press SOURCE button repeatedly to enter BT mode. The indicator is blue.
2. Turn off the Bluetooth functionality of other devices that are paired with your
unit. Only one device can be used with the Bluetooth function at a time.
3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth
controls are found on the device’s tools or settings menu (see your user manual).
Turn on Bluetooth connectivity and make your device “discoverable”.
4. Choose “add a new Bluetooth device”or “setup Bluetooth device”on your device.
It will start to search. Once “ ”shows on your device, select it. If your
device prompts you for a pass code, please enter"0000". If the pairing attempt
fails or times out, please start pairing procedure again.
5. After your device and the “ ”have connected each other, a sound
can be heard.
NOTE:
The unit will automatically reconnect the last paired device when Bluetooth
mode is reselected from other mode. If for some reason the Bluetooth
connection is lost due to external factors or will not auto reconnect, you
process again.
Make sure the Bluetooth connection between the unit and the device is activated.
•Press b utton to suspend momentarily the playing track. Press again to
resume playing.
•Press button to skip forward to the next track and button to
skip backward to the previous track.
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME +/- buttons to adjust the volume level.
•Press BASS +/- buttons to adjust bass level.
•Press TREBLE +/- buttons to adjust treble level.
•Press EQ button to switch between
9
must clear the " " from your Blue Tooth device list and begin the paring
-During playback
-Pairing
BLUETOOTH
"0000"
JSB-200
JSB-200
JSB-200
Press PAIR button on remote control to disconnect the current connection of the unit
with the external device.
JAZZ/POP/CLAS/ROCK/NORM.
&KHFNWKHIROORZLQJVEHIRUHUHTXHVWLQJVHUYLFH
6<03720 3266,%/(&$86( 3266,%/(628/7,21
TROUBLESHOOTING GUIDE
Reduce the bass level of the connected
device
Press the SOURCE button repeatedly to
set the input source to the desired mode
No power
No sound
Sound distortion
Remote not
working
Bluetooth
reception failure
Have not paired
consumed
The battery is
The external device is far from
the unit
Volume level too high
Bass level of the connected
device too high
Input source incorrect
The connected device is not
in payback mode
Volume in minimum position
AC plug not connected to the
wall outlet Plug to the wall outlet.
Raise volume level by pressing the VOL
(Volume) + button
Play the music/movie in the connected
device as usual and make sure the
volume level of it is in high level
VOL (Volume ) - button
Reduce the volume level by pressing
the
Replace with new battery
Put the external BT device close to the
unit
Pair both unit as BT pairing page
10
Power source of the remote control..................DC 3V, 1x CR 2025 button cell
Output of the power adapter.................................................. DC 16V,1.8 A
Audio output.......................................................................................2x10 W
Power consumption.............................................................................25 W
Bluetooth working range.......................................................................10M
1 x Instruction manual
1 x Remote control
1 x CR 2025 button cell (Already installed in the remote control)
1 x Stereo audio connection cable with 3.5mm stereo plug
11
ACCESSORIES
GENERAL SPECIFICATIONS
1 x RCA audio cable
1 x Adapter
4 x Screws ( For wall mounting )
4 x Wall plugs ( For wall mounting )
2 x Metal brackets ( For wall mounting )
Subwoofer frequency................................................................................80-150Hz
Subwoofer level........................................................................................1V ( max )
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.