Junlan Electronic JSB200 Wall Mountable 2.0-Channel Bluetooth Soundbar Speaker User Manual BT0218MO English manual

Download:
Mirror Download [FCC.gov]
Document ID	2001898
Application ID	LQYL8aY4v8pH7yieLb0wJQ==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	419.94kB (5249264 bits)
Date Submitted	2013-06-27 00:00:00
Date Available	2013-06-27 00:00:00
Creation Date	2013-01-22 19:54:17
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2013-06-25 10:17:15
Document Title	BT0218MO English manual
Document Creator	CorelDRAW
Document Author:	Administrator

BLUETOOTH SOUNDBAR SYSTEM
MODEL: JSB-200
INSTRUCTION MANUAL
Please read this instruction manual carefully and keep it for future reference.
Insert the small plug from supplied AC/DC adaptor to DC IN jack
on the rear of the unit and insert the AC/DC adaptor
to the wall outlet having AC 100-240V~, 50/60 Hz.
NOTE:This AC/DC adapter is intended to be
correctly operated in a vented indoor wall outlet.
AC/DC adapter
To the DC IN jack on the rear of unit.
1. Placing the device on table
Ventilation
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar
for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat
generated from the Sound Bar could produce a potential heat hazard.
MOUNTING
1. Mounting the device on wooden wall
We recommend having this speaker professionally mounted. By using the included
wall mounting accessories, the sound bar can be mounted onto a wall.
25.9 inches
Hole
s dis
tan
in s
am
ce:2
5.9
inch
es
eh
oriz
onta
l lev
el
supplied Metallic Bracket
supplied Screws
supplied Metallic Bracket
supplied Screws
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill the supplied screws directly into the marks that you have made on the wall
with the Metallic Bracket as the figure above.
3. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.
2. Mounting the device on wall
2.Mountighewdal:
supplied Plastic Inserts
Hole
s dis
tan
in s
ce:2
am
eh
oriz 5.9 inc
onta
hes
l lev
el
supplied Metallic Bracket
(1)
supplied Screws
(2)
supplied Plastic Inserts
supplied Metallic Bracket
Drill holes by powerful electrical drill.
supplied Screws
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill holes by a powerful electric drill( Not supplied )( Drill head diameter:6.0 mm ).
3. Insert the supplied plastic inserts into the holes by hammer.
4. Secure the supplied screws into the plastic inserts with the Metallic Bracket.
5. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.
PRODUCT OVERVIEW
Front View
Back View
AUX-IN 1 jacks
SUBWOOFER OUT jack DC IN jack
Side View
VOLUME +
AUX-IN 2 Jack
POWER/SOURCE
VOLUME 5
REMOTE CONTROL
1. STANDBY
2. VOL- ( volume down )
3. SOURCE
4. BASS5. TREBLE6.
7. ( play/pause )
8.
(mute)
9. VOL+ ( volume up )
10. BASS +
11. PAIR
12. TREBLE +
13. EQ ( Equalizer )
14.
STANDBY
PAIR
10
11
12
13
14
BATTERY INSTALLATION
- Before installation
Remove and discard the insulation tab. Out of the box the Remote Control
has a battery and will be usable after the tab is removed.
-Replace battery for the remote control
1. Push and slide out the battery holder as Figure 1 below.
2. Replace the battery with a new CR2025 button cell with the polarity (+)
side upward.
3. Slide into the battery holder.
BATTERY PRECAUSIONS
• Never recharge the batteries, apply heat to them or take them apart.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not throw the batteries in fire!
• Attention should be drawn to the environmental aspects of battery disposal.
• If the remote control is not going to be used for a long time, remove the battery
to avoid damage caused by battery leakage corrosion.
POWER CONTROL
- To turn the unit on
• Connect the supplied AC/DC adapter.
• Press STANDBY button to turn on the unit.
- To turn the unit off
• Press STANDBY button on the remote control or hold STANDBY button in
the right side of the unit.
NOTE:
If the unit is not used for a long period of time, disconnect the AC/DC adapter.
AUX-IN 1 CONNECTION
- RCA AUX IN sources may include
•TV/DVD/VCR
- RCA AUX IN connection
1. Connect the RCA audio cable (supplied) to the audio output jack on DVD
player and AUX 1 or AUX 2 jack on the rear of DVD.
2. Press SOURCE button repeatedly until the indictaor turns green.
White
Red
-During playback
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME+/- buttons to adjust the volume level.
•Press BASS+/- buttons to adjust bass level.
•Press TREBLE+/-buttons to adjust treble level.
•Press EQ button to switch between JAZZ/POP/CLAS/ROCK/NORM.
AUX-IN 2 CONNECTION
- AUX IN source may include:
•Personal audio players
•Personal computers or laptops
- AUX IN connection:
1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or
LINE/Audio output of the personal audio player and the AUX-IN 2 jack on the
right side of the unit.
2. Power on the unit and press SOURCE button repeatedly un til the indicator
turns orange. S et your personal audio player/computer to play.
NOTE: If there is no sound or if the volume is not loud enough, you may
increase the setting on the source.
Connect to the output
socket of external
audio devices (Mp3,
Computer, ext.)
To AUX IN Jack
on the unit
-During playback
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME+/- buttons to adjust the volume level.
•Press BASS+/- buttons to adjust bass level.
•Press TREBLE+/-buttons to adjust treble level.
•Press EQ button to switch between JAZZ/POP/CLAS/ROCK/NORM.
SUBWOOFER CONNECTION
Subwoofer connection source may include:
Amplifiers and other devices with audio input jack
Connect the RCA cable with the subwoofer out jack, and another end of
RCA cable to the audio in jack of amplifiers or other devices.
BLUETOOTH
-Pairing
1. Press SOURCE button repeatedly to enter BT mode. The indicator is blue.
2. Turn off the Bluetooth functionality of other devices that are paired with your
unit. Only one device can be used with the Bluetooth function at a time.
3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth
controls are found on the device’s tools or settings menu (see your user manual).
Turn on Bluetooth connectivity and make your device “discoverable”.
4. Choose “add a new Bluetooth device”or “setup Bluetooth device”on your device.
It will start to search. Once “ JSB-200 ”shows on your device, select it. If your
"0000" If the pairing attempt
device prompts you for a pass code, please enter"0000".
fails or times out, please start pairing procedure again.
5. After your device and the “ JSB-200 ”have connected each other, a sound
can be heard.
NOTE:
The unit will automatically reconnect the last paired device when Bluetooth
mode is reselected from other mode. If for some reason the Bluetooth
connection is lost due to external factors or will not auto reconnect, you
must clear the " JSB-200 " from your Blue Tooth device list and begin the paring
process again.
Press PAIR button on remote control to disconnect the current connection of the unit
with the external device.
-During playback
Make sure the Bluetooth connection between the unit and the device is activated.
b utton to suspend momentarily the playing track. Press again to
•Press
resume playing.
•Press
button to skip forward to the next track and
b utton to
skip backward to the previous track.
•Press MUTE button to turn off the sound. Press again to resume the sound.
•Press VOLUME +/- buttons to adjust the volume level.
•Press BASS +/- buttons to adjust bass level.
•Press TREBLE +/- buttons to adjust treble level.
•Press EQ button to switch between JAZZ/POP/CLAS/ROCK/NORM.
TROUBLESHOOTING GUIDE
&KHFNWKHIROORZLQJVEHIRUHUHTXHVWLQJVHUYLFH
6<03720
3266,%/(&$86(
3266,%/(628/7,21
No power
AC plug not connected to the
wall outlet
Plug to the wall outlet.
Volume in minimum position
Raise volume level by pressing the VOL
(Volume) + button
The connected device is not
in payback mode
Play the music/movie in the connected
device as usual and make sure the
volume level of it is in high level
Input source incorrect
Press the SOURCE button repeatedly to
set the input source to the desired mode
Bass level of the connected
device too high
Reduce the bass level of the connected
device
Volume level too high
Reduce the volume level by pressing
the VOL (Volume ) - button
The battery is consumed
Replace with new battery
No sound
Sound distortion
Remote not
working
Bluetooth
reception failure
The external device is far from
the unit
Put the external BT device close to the
unit
Pair both unit as BT pairing page
Have not paired
10
GENERAL SPECIFICATIONS
Power source of the remote control..................DC 3V, 1x CR 2025 button cell
Output of the power adapter.................................................. DC 16V,1.8 A
Audio output.......................................................................................2x10 W
Power consumption.............................................................................25 W
Bluetooth working range.......................................................................10M
Subwoofer frequency................................................................................80-150Hz
Subwoofer level........................................................................................1V ( max )
ACCESSORIES
1 x Instruction manual
1 x Remote control
1 x CR 2025 button cell (Already installed in the remote control)
1 x Stereo audio connection cable with 3.5mm stereo plug
1 x RCA audio cable
1 x Adapter
4 x Screws ( For wall mounting )
4 x Wall plugs ( For wall mounting )
2 x Metal brackets ( For wall mounting )
11
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2013:01:22 19:54:17+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2013:06:25 10:17:15+08:00
Metadata Date                   : 2013:06:25 10:17:15+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : BT0218MO  English manual
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:fe6b22cb-0833-499a-a5a9-b118e60c4ace
Instance ID                     : uuid:5b339ee0-f566-4ec0-83d0-7e06f6b66ab5
Has XFA                         : No
Page Count                      : 13
Author                          : Administrator

EXIF Metadata provided by EXIF.tools