KIMIN Electronics LT37U41 LCD TV Monitor User Manual 033D sam
Kimin Electronic Co., Ltd LCD TV Monitor 033D sam
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 993224 |
| Application ID | khyW+FLIVfTTTjeyydTwGg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 173.05kB (2163121 bits) |
| Date Submitted | 2008-08-31 00:00:00 |
| Date Available | 2008-08-31 00:00:00 |
| Creation Date | 2008-08-12 06:05:52 |
| Producing Software | Acrobat Distiller 5.0.5 for Macintosh |
| Document Lastmod | 2008-08-12 15:43:07 |
| Document Title | 033D_sam |
| Document Creator | QuarkXPress.3.3E: LaserWriter 8 Z1-8.7.1 |
| Document Author: | mac3 |
DIGITAL TV OWNER’S MANUAL LT32U41H LT37U41H Please read this manual carefully before operating your set. Retain it for future reference. WARNING / CAUTION WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. CAUTION Do not attempt to modify this product in any way without written authorization from the dealer. Unauthorized modification could void the user’s authority to operate this product. WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13.Unplug this apparatus during lightning storms or when unused for long periods of time. 14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. Important Safety Instructions 16.To completely disconnect this apparatus from the AC Mains, disconnect the mains plug from the AC receptacle. 17.The mains plug of the power supply cord shall remain readily operable. 18.This apparatus shall be connected to a Mains socket outlet with a protective earthing connection. NOTE Prolonged use of headphones at a high volume may cause health damage on your ears. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage " within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Contents WARNING / CAUTION 3-4 Important Safety Instructions 5-6 Contents 7-8 Accessories Supplied Accessories Installing Batteries Controls And Connectors Front Panel Rear Panel Remote Control 10-13 10 11 12-13 Installation Stand Installation Wall mount Installation Desktop Pedestal Installation 14-15 14 15 15 Connections Antenna Connection VCR Connection DVD Connection HDSTB Connection External A/V Source Digital Audio Out PC Connection Resolution 16-25 16 17-18 19-20 21-22 23 23 24 25 Basic Operation Turning On or Off Channel Selection Volume Adjustment Sound Mute Quick View Input Selection Language Selection 26-27 26 26 26 26 26 27 27 On Screen Menus 28 Setting up TV Channel Auto Scan Add/Delete Channel EPG(Electronic Program Guide) 29-31 29 30 31 Picture Controls Auto Picture Controls Manual Picture Controls Color Temperature 32-34 32 33 34 Advanced Video Dynamic Noise Reduce Black Level Extender White Peak Limiter 35-40 35 36 37 Contents CTI(Color Transient Intensity) Flesh Tone Adaptive Luma Control 38 39 40 Sound Controls Auto Sound Controls Manual Sound Controls Digital Output Auto Volume Control Stereo/SAP Broadcast Setup 41-44 41 42 43 44 44 Time Setting Time Zone Setting Auto Time Setting Manual Time Setting Auto On/Off Time Setting Sleep Timer 45-49 45 46 47 48 49 Captions Closed Caption-Analog Closed Caption-Digital Closed Caption Options 50-52 50 51 52 Reset Reset Default 53 53 Parental Control Enter your password Set Password Rating Enable/Disable TV Ratings for USA Movie Ratings TV Rating English for Canada TV Rating French for Canada Downloadable Rating Clean All 54-62 54 54 55 56-57 58 59 60 61 62 Setting the PC Mode Auto Picture Controls Manual Picture Controls Color Temperature Auto Adjustment Manual Adjustment 63-67 63 64 65 66 67 Special Functions Picture Format 68 68 Specification 69 Troubleshooting 70 Warranty Card 72 Registration Card 73-74 Accessories Supplied Accessories Ensure that the following accessories are included with your product. If an accessory is missing, please contact our support department at (866) 280-1998 or contact us through our website located at www.soyo.com/content/Product_Support/147 User must use shielded signal interface cables with ferrite cores to maintain standard compliance for the product. 1. Remote 2. Batteries 3. Power Cord 4. Owner’s Manual 5. 6-bolts for stand assembly Installing Batteries Open the battery cover on the back side. Insert two batteries in correct polarity, match (+ with +), and match (- with -). Don't mix old batteries with new batteries. Close the battery cover. Controls And Connectors Front Panel VOL VOL CH CH TV/AV MENU 1. VOL + / VOL Adjusts menu setting. Adjusts sound level. 2. CH + / CH Select a channel. 3. TV/AV Selects the TV, AV, S-Video, YPbPr, VGA or HDMI mode. 4. MENU Display on screen menus. 5. POWER Switches the set on or off. 6. Power Indicator Illuminates in bright blue when the TV is in standby mode. Illuminates in dark blue when the TV is switched on. Remote control sensor Accepts the IR signal of remote controller. NOTE Here shown may be somewhat different from your set. 10 Controls And Connectors Rear Panel COMPONENT IN HDMI/DVI IN RGB IN (PC) AUDIO Pb VIDEO S-VIDEO IN AV IN VIDEO Pr AUDIO IN (RGB/DVI) ANTENNA/ CABLE IN DIGITAL AUDIO OUT(COAXIAL) AC IN AUDIO 1. HDMI/DVI IN Connect to the HDMI jack for device with HDMI output. (This input can also be used as a DVI connection with an HDMI to DVI adaptor and separate analog audio inputs.) 2. RGB IN (PC) Connect to the video output jack on your PC. 3. COMPONENT IN Video/Audio inputs for Component. 4. S-VIDEO IN Connect the output of an S-VIDEO device to the S-VIDEO input. 5. AV IN Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder. 6. AUDIO IN (RGB/DVI) Connect to the audio output jack on your PC. 7. ANTENNA/CABLE IN Connect to your antenna or cable box for TV signal. 8. DIGITAL AUDIO OUT(COAXIAL) Connect digital audio to various types of equipment. 9. AC IN This TV operates on an AC power. 11 Controls And Connectors Remote Control - All the functions can be controlled with the remote control handset. - Some functions can also be adjusted with the buttons on the side panel of the set. - Before using remote control handset, please install the batteries. 1. POWER Switches the set on or off. POWER SOURCE 3. NUMBER BUTTONS Selects channel numbers. EXIT VOL CH 2. SOURCE Selects the TV, AV, S-Video, YPbPr, VGA or HDMI mode. 4. Hyphen( ) Press to select DTV channels. For example, to select channel ‘10-1’, press ‘10’ then press ‘ ’ and ‘1’. 5. Switch to the previous channel number. OK MENU MUTE IPI ISI CC MTS SLEEP ZOOM 6. VOL+ / VOLAdjusts sound level. 7. CH+ / CHSelect a channel. EPG DISPLAY 8. EXIT Clear all on-screen menus and return to TV viewing from any menu. 9. Navigational Controls Adjusts menu settings. Selects menu item. Accepts your selection. 12 Controls And Connectors 10. MENU Display on screen menus. POWER 11. MUTE Switches the sound on or off. SOURCE 12. Recalls your preferred picture setting. 13. Recalls your preferred sound setting. 14. SLEEP Sets the sleep timer. EXIT VOL CH 15. ZOOM Selects your desired picture format. OK MENU 10 13 MUTE IPI ISI CC MTS SLEEP ZOOM 12 16 17 11 14 15 EPG DISPLAY 19 18 16. CC Select the Caption menu directly. 17. MTS Select MTS sound : Mono, Stereo and SAP in Analog Channel. Change the audio language in DTV Channel. 18. EPG Displays the program guide. 19. DISPLAY Shows the present screen information. 13 Installation Stand Installation 1. Carefully place the product screen side down on a cushioned surface that will product and screen from damage. 2. Assemble the product stand with the product as shown. 3. Install the 5 bolts securely, in the back of the product in the holes provided. 14 Installation Wall mount Installation 4 inches 4 inches 4 inches 4 inches 4 inches The set can be installed on a wall as shown above. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. Detailed instructions are available from your dealer, refer to the optional Wall Mounting Bracket Installation and Setup Guide. (Wall Mount Sold Separately) NOTE - Do not install the Wall-Mount except the Qualified Service Personnel. Desktop Pedestal Installation 4 inches 4 inches 4 inches 4 inches The set can be mounted on a desk as shown above. For proper ventilation, allow a clearance of 4 inches on each side from the wall. Detailed instructions are available from your dealer, refer to the optional Desktop Stand Installation and Setup Guide. 15 Connections Antenna Connection Multi-family Dwellings/ Apartments (Connect to wall antenna socket) AUDIO IN (RGB/DVI) AV IN VIDEO ANTENNA/ CABLE IN DIGITAL AUDIO OUT(COAXIAL) AC IN AUDIO Wall Antenna Socket RF Coaxial Wire (75 ohm) Turn clockwise to tighten. VHF UHF Outdoor Antenna Be careful not to bend the bronze wire when connecting to an antenna port. * Separately purchase a RF Coaxial Wire(75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) NOTE - To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. - If the antenna is not installed properly, contact your dealer for assistance. AUDIO VHF UHF Signal Amplifier 16 AUDIO IN (RGB/DVI) AV IN VIDEO ANTENNA/ CABLE IN DIGITAL AUDIO OUT(COAXIAL) AC IN Connections VCR Connection - To avoid picture noise (interface), leaves an adequate distance between the TV and the VCR. When connecting with an antenna 1. Connect the Antenna out socket of the VCR to the Antenna input socket on the TV. VCR ANT IN (R) AUDIO (L) ANT OUT VIDEO OUT S-VIDEO IN VIDEO ANTENNA/ CABLE IN AUDIO IN (RGB/DVI) AV IN DIGITAL AUDIO OUT(COAXIAL) 2. Press the Power button on the VCR and match the appropriate input selection between the TV and VCR for viewing. AC IN AUDIO Back panel of the set When connecting with a RCA cable VCR ANT IN VIDEO ANT OUT S-VIDEO OUT OUTPUT SWITCH IN (L) AUDIO (R) 1. Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2. Insert a video tape into the VCR and press PLAY on the VCR. 3. Select the AV input source with using the SOURCE button on the remote control. COMPONENT IN AUDIO Pb VIDEO Pr S-VIDEO IN AV IN VIDEO 4. Refer to the VCR manual for operating instructions. AUDIO Back panel of the set 17 Connections When connecting with a S-Video cable VCR ANT IN VIDEO ANT OUT S-VIDEO OUT OUTPUT SWITCH IN (L) AUDIO (R) 1. Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. 2. Connect the audio outputs of the VCR to the AV AUDIO L, R input jacks on the set. 3. Insert a video tape into the VCR and press PLAY on the VCR. COMPONENT IN AUDIO Pb VIDEO Pr S-VIDEO IN AV IN VIDEO AUDIO 4. Select the S-Video input source with using the SOURCE button on the remote control. Back panel of the set 5. Refer to the VCR manual for operating instructions. 18 Connections DVD Connection When connecting with a S-Video cable DVD 1. Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. ANT IN VIDEO ANT OUT S-VIDEO OUT OUTPUT SWITCH IN (L) AUDIO (R) 2. Connect the audio outputs of the DVD to the AV AUDIO L, R input jacks on the set. 3. Turn on the DVD player, insert a DVD. 4. Select S-Video input source with using the SOURCE button on the remote control. COMPONENT IN AUDIO Pb VIDEO S-VIDEO IN Pr AV IN VIDEO AUDIO 5. Refer to the DVD player's manual for operating instructions. Back panel of the set When connecting with a Component cable DVD Pb (L) AUDIO (R) Pr 1. Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT VIDEO(Y, Pb, Pr) jacks on the set. 2. Connect the audio outputs of the DVD to the COMPONENT AUDIO L, R jacks on the set. 3. Turn on the DVD player, insert a DVD. COMPONENT IN AUDIO Pb VIDEO Pr S-VIDEO IN AV IN VIDEO AUDIO Back panel of the set 4. Select YPbPr source with using the SOURCE button on the remote control. 5. Refer to the DVD player's manual for operating instructions. 19 Connections When connecting with a HDMI cable 1. Connect the HDMI output of the DVD to the HDMI/DVI IN jack on the set. DVD HDMI-DVD OUTPUT 2. Select HDMI input source with using the SOURCE button on the remote control. 3. Refer to the DVD player's manual for operating instructions. COMPONENT IN HDMI/DVI IN RGB IN (PC) AUDIO Back panel of the set 20 Pb VIDEO Pr Connections HDSTB Connection - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting with a D-Sub 15 pin cable Digital Set-top Box (R) AUDIO (L) 1. Connect the RGB output of the digital set-top box to the RGB IN (PC) jack on the set. RGB-DTV OUTPUT 2. Connect the audio outputs of the set-top box to the AUDIO IN (RGB/DVI) jack on the set. 3. Turn on the digital set-top box. 4. Select VGA input source with using the SOURCE button on the remote control. COMPONENT IN RGB IN (PC) S-VIDEO IN AUDIO Pb VIDEO AUDIO IN (RGB/DVI) AV IN VIDEO Pr 5. Refer to the digital set-top box manual for operating instructions. AUDIO Back panel of the set When connecting with a HDMI cable Digital Set-top Box HDMI-DVD OUTPUT 1. Connect the HDMI output of the digital set-top box to the HDMI/DVI IN jack on the set. 2. Turn on the digital set-top box. 3. Select HDMI input source with using the SOURCE button on the remote control. 4. Refer to the digital set-top box manual for operating instructions. COMPONENT IN HDMI/DVI IN RGB IN (PC) AUDIO Pb VIDEO Pr Back panel of the set 21 Connections When connecting with a Component cable Digital Set-top Box Pb 1. Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT VIDEO(Y, Pb, Pr) jacks on the set. (L) AUDIO (R) Pr 2. Connect the audio outputs of the digital set-top box to the COMPONENT AUDIO L, R jacks on the set. 3. Turn on the digital set-top box. COMPONENT IN S-VIDEO IN AUDIO Pb VIDEO Pr AV IN VIDEO AUDIO Back panel of the set 4. Select YPbPr source with using the SOURCE button on the remote control. 5. Refer to the digital set-top box manual for operating instructions. When connecting with a HDMI to DVI cable 1. Connect the DVI output of the digital set-top box to the HDMI/DVI IN jack on the set. Digital Set-top Box DVI-DTV OUTPUT (R) AUDIO (L) 2. Connect the audio outputs of the set-top box to the AUDIO IN (RGB/DVI) jack on the set. 3. Turn on the digital set-top box. 4. Select HDMI input source with using the SOURCE button on the remote control. COMPONENT IN HDMI/DVI IN RGB IN (PC) AUDIO Back panel of the set 22 Pb VIDEO Pr S-VIDEO IN AUDIO IN (RGB/DVI) AV IN VIDEO AUDIO 5. Refer to the digital set-top box manual for operating instructions. Connections External A/V Source VIDEO 1. Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) L-AUDIO-R OUT Camcorder Video game set 2. Select the AV input source with using the SOURCE button on the remote control. 3. Operate the corresponding external equipment. COMPONENT IN AUDIO Pb VIDEO S-VIDEO IN Pr 4. Refer to the external equipment manual for operating instructions. AV IN VIDEO AUDIO Back panel of the set Digital Audio Out Audio Equipment 1. Connect one end of the coaxial cable to the TV’s DIGITAL AUDIO OUT(COAXIAL) port. DIGITAL AUDIO IN(COAXIAL) 2. Connect the other end of the coaxial cable to the digital audio input on the audio equipment. 3. Refer to the external audio equipment manual for operation. AUDIO IN (RGB/DVI) AV IN VIDEO ANTENNA/ CABLE IN DIGITAL AUDIO OUT(COAXIAL) AC IN AUDIO Back panel of the set 23 Connections PC Connection When connecting with a D-Sub 15 pin cable PC AUDIO OUT 1. Connect the RGB output of the PC to the RGB IN(PC) jack on the set. PC OUTPUT 2. Connect the PC audio outputs to the AUDIO IN (RGB/DVI) jack on the set. 3. Turn on the PC and the set. 4. Select VGA input source with using the SOURCE button on the remote control. COMPONENT IN RGB IN (PC) S-VIDEO IN AUDIO Pb VIDEO VIDEO Pr AUDIO IN (RGB/DVI) AV IN AUDIO Back panel of the set When connecting with a HDMI to DVI cable 1. Connect the DVI output of the PC to the HDMI/DVI IN jack on the set. PC DVI OUTPUT AUDIO OUT 2. Connect the PC audio outputs to the AUDIO IN (RGB/DVI) jack on the set. 3. Turn on the PC and the set. 4. Select HDMI input source with using the SOURCE button on the remote control. COMPONENT IN HDMI/DVI IN RGB IN (PC) AUDIO Back panel of the set 24 Pb VIDEO Pr S-VIDEO IN AUDIO IN (RGB/DVI) AV IN VIDEO AUDIO Connections Resolution Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.47 59.94 35.16 56.25 37.88 60.32 48.36 60.00 800 x 600 1024 x 768 NOTE a. The synchronization input form is separate. b. If the resolution is not supported, ‘Not Support!’ message will be displayed. 25 Basic Operation Turning On or Off Standby Setup: The AC power cord must be connected to have the TV in standby mode and ready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on the remote or the TV itself to turn the TV on. 2. Press the POWER button again on the remote controller or the TV itself to turn the TV off. Channel Selection You can select a channel number with the CH+ / CH- button or NUMBER buttons. Volume Adjustment Press the VOL+ / VOL- button to adjust the sound level. Sound Mute Press the MUTE button. The sound is switched off and the mute display appears. To cancel mute mode, press the MUTE or VOL+ / VOL- button again. Quick View Press the 26 button to view the last channel you were watching. Basic Operation Input Selection 1. Press the SOURCE button to change the input mode. Input Source TV 2. Press the Down or Up button to select your desired mode. AV S-Video YPbPr 3. Press the OK button to change your selected mode. VGA HDMI Language Selection 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select OSD Language. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the Left or Right button to select your desired language. Setup Select MENU Back 4. The on screen menu will then appear in the selected language. 27 On Screen Menus Your TV’s OSD(On Screen Display) may differ slightly from what is shown in this manual. 1. Press the MENU button and then use Down or Up button to select each menu. 2. Press the OK button and then Down, Up, Left and Right buttons to navigate to the available menus. Video Audio TV Setup Parental Video Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Enter F G User Balance Bass Treble Sound Mode Digital Output Auto Volume Control Video 45 50 50 Audio TV Setup Audio Audio Select MENU Exit Program Block Change Password Clean All ENTER Enter Tuner Mode Channel Scan Channel Skip Video Audio Setup Parental Parental TV Select MENU Exit ENTER Enter Parental MENU Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Setup Select MENU Exit Cable F G Select MENU Exit TV MENU Parental ENTER Enter Select MENU Exit Setup MENU 28 F G TV ENTER Enter F G Audio MENU Setup Parental F G TV User PCM Off Parental Video MENU Video 40 40 Setting up TV Channel Auto Scan Automatically finds all channels available through the Antenna or Cable and stores them in memory on the channel list. 1. Press the MENU button and then press the Down or Up button to select the TV. 2. Press the OK button and then press the Down or Up button to select Tuner Mode. Video Audio Tuner Mode Channel Scan Channel Skip Cable F G TV Setup Parental 3. Press the Left or Right button to select Antenna or Cable. TV 4. Press the Down or Up button to select Channel Scan. Select Video Audio Tuner Mode Channel Scan Channel Skip MENU Cable Exit F G TV 5. Press the OK button to start auto search. The TV will begin memorizing all of the available channels. Setup Parental TV 6. Press the MENU button at any time to interrupt the memorization process. ENTER Scan Select MENU Back Video Audio TV Setup Status:Scanning.. Analog Channels:1 Digital Channels:0 Cable 10% Parental Channel Scan MENU Cancel 29 Setting up TV Channel Add/Delete Channel You can manually store or remove channels in whatever order you desire. 1. Press the MENU button and then press the Down or Up button to select the TV. 2. Press the OK button and then press the Down or Up button to select Channel Skip. Video Audio Tuner Mode Channel Scan Channel Skip Cable F G TV Setup Parental 3. Press the OK button and then press the Down or Up button to select channel you want to add or delete. If you want to skip the selected channel, press the OK button. TV Video Audio 4. Save the other channels in the same method. ENTER Enter TV Setup Parental 5. Press the MENU button to return to the previous menu. Channel Skip 30 10 Select MENU Back Select MENU Back Analog Analog Analog Analog Analog Analog Analog Analog Analog Analog ENTER Set Setting up TV Channel EPG(Electronic Program Guide) Displays Broadcasting guide of received channel. 1. Press the EPG button to display the Electronic Program Guide. 2. Press the Left or Right button to change channel and display the broadcasting guide at the bottom of the screen. Sunday, 3-February-2008 9:00:00 PM 7-1 ABC D-2 Today Today Today Tomorrow Tomorrow 9:00 PM HD 10:00 PM 11:00 PM 12:00 AM ABC 12:50 AM HD1 9:01 PM-10:09 PM Sun, 3-Feb Not Rated 31 Picture Controls Auto Picture Controls Picture Mode adjusts the set for the best picture appearance. Select the preset value in the Picture Mode menu. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select Picture Mode. Video Audio TV Setup Parental 3. Press the Left or Right button to select Soft, Standard, Vivid or User. Video Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video User F G 60 50 50 Select MENU Back 4. Press the MENU button to return to the previous menu. Soft Select this option to display with a soft image. Standard The most general and natural screen display status. Vivid Select this option to display with a sharp image. User Select this option to use the user-defined setting. NOTE - If you want to select Picture Mode directly, press the button. - Every time you press the button, it will switch between Soft, Standard, Vivid or User. - When you adjust Brightness, Contrast, Saturation, HUE or Sharpness, Picture Mode changes to User. 32 Picture Controls Manual Picture Controls You can adjust picture Brightness, Contrast, Saturation, HUE and Sharpness to the levels you prefer. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select desired picture option. (Brightness, Contrast, Saturation, HUE, Sharpness) Video Audio TV Setup Parental Video 3. Press the OK button and then press the Left or Right button to make appropriate adjustments. Brightness Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Adjust User F G 60 50 50 Select MENU Back 60 4. Press the MENU button to return to the previous menu. Brightness Increases or decreases amount of white in the your picture. Contrast Adjusts the difference between the light and dark levels in the picture. Saturation Adjusts intensity of all colors. HUE Adjusts the balance between red and green levels. Sharpness Adjusts the level of sharpness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. 33 Picture Controls Color Temperature You can adjust to color temperature you prefer. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio TV 2. Press the OK button and then press the Down or Up button to select Color Temperature. Setup Parental 3. Press the OK button and then press the Left or Right button to select Cool, Standard, Warm or User. Video 4. Press the Down or Up button to select desired color item. Video Audio TV Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Enter Color Temperature R Gain G Gain B Gain User F G 60 50 50 Select MENU Standard Back F G Setup 5. Press the OK button and then press the Left or Right button to make appropriate adjustments. 6. Press the MENU button to return to the previous menu. Parental Color Temperature Select MENU R Gain NOTE - To you adjust R Gain, G Gain, B Gain, or Color Temperature change to Picture Mode to User. 34 Back Advanced Video Dynamic Noise Reduce Use this feature to reduce picture artifacts caused by the digitizing of image motion content that may be present in the picture. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select DNR. 4. Press the Left or Right button to select Off, Low, Medium, Strong or Auto. Video Video Audio TV 5. Press the MENU button to return to the previous menu. Setup Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Enter DNR Black Level Extender White Peak Limiter CTI Flesh Tone Adaptive Luma Control User F G 60 50 50 Select MENU Medium Off On Low Off On Back F G F G F G F G F G F G Parental Advanced Video Select MENU Back Off Turns the screen noise reduction function off. Low Reduces screen noise at a low level. Medium Reduces screen noise at a medium level. Strong Reduces screen noise at a high level. Auto Adjusts automatically screen noise according to received signal. 35 Advanced Video Black Level Extender Use this feature to increase the picture reproduction performance in the dark areas of the picture. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select Black Level Extender. 4. Press the Left or Right button to select On or Off. Video Video Audio 5. Press the MENU button to return to the previous menu. TV Setup Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Enter DNR Black Level Extender White Peak Limiter CTI Flesh Tone Adaptive Luma Control User F G 60 50 50 Select MENU Medium Off On Low Off On Back F G F G F G F G F G F G Parental Advanced Video 36 Select MENU Back Advanced Video White Peak Limiter Use this feature to limit excessive amounts of white in bright areas of the picture, this is caused by a lower sync level from a channel being received from the antenna or cable. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select White Peak Limiter. 4. Press the Left or Right button to select On or Off. Video Video Audio 5. Press the MENU button to return to the previous menu. TV Setup Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Enter DNR Black Level Extender White Peak Limiter CTI Flesh Tone Adaptive Luma Control User F G 60 50 50 Select MENU Medium Off On Low Off On Back F G F G F G F G F G F G Parental Advanced Video Select MENU Back 37 Advanced Video CTI(Color Transient Intensity) This feature can be used to reduce the time taken to transition from one color to another. The effect will be seen as sharpening the border between colors. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select CTI. 4. Press the Left or Right button to select Off, Low, Medium or Strong. Video Video Audio TV 5. Press the MENU button to return to the previous menu. Setup ENTER Enter DNR Black Level Extender White Peak Limiter CTI Flesh Tone Adaptive Luma Control User F G 60 50 50 Select MENU Medium Off On Low Off On Back F G F G F G F G F G F G Parental Advanced Video 38 Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video Select MENU Back Advanced Video Flesh Tone In some cases, activation of this feature can result in a more pleasing production of sky and flesh color. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select Flesh Tone. 4. Press the Left or Right button to select On or Off. Video Video Audio 5. Press the MENU button to return to the previous menu. TV Setup Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Enter DNR Black Level Extender White Peak Limiter CTI Flesh Tone Adaptive Luma Control User F G 60 50 50 Select MENU Medium Off On Low Off On Back F G F G F G F G F G F G Parental Advanced Video Select MENU Back NOTE - Flesh Tone can not be adjusted in PC mode. 39 Advanced Video Adaptive Luma Control Large areas of darkness in a picture will result in a lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature will raise the APL to counteract this effect. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select Adaptive Luma Control. 4. Press the Left or Right button to select On or Off. Video Video Audio 5. Press the MENU button to return to the previous menu. TV Setup Picture Mode Brightness Contrast Saturation HUE Sharpness Color Temperature Advanced Video ENTER Enter DNR Black Level Extender White Peak Limiter CTI Flesh Tone Adaptive Luma Control User F G 60 50 50 Select MENU Medium Off On Low Off On Back F G F G F G F G F G F G Parental Advanced Video 40 Select MENU Back Sound Controls Auto Sound Controls This Sound Mode automatically adjusts the sound controls to the recommended settings. 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select Sound Mode. Video Audio TV Setup Balance Bass Treble Sound Mode Digital Output Auto Volume Control 40 40 Voice Off Off F G F G F G Parental 3. Press the Left or Right button to select Voice, Concert, Jazz or User. Audio Select MENU Back 4. Press the MENU button to return to the previous menu. Voice Select this option while watching a show that is mostly dialog. Concert Select this option to when listening to music to enjoy the original sound. Jazz This option highlights bass and also emphasizes instruments such as piano and guitar. User Select this option to manually adjust the audio settings. NOTE - If you want to change the Sound Mode without entering the menus, press the button. - Each time you press the button, it will switch between Voice, Concert, Jazz and User. - When you manually adjust the Bass or Treble, the Sound Mode will change to User. 41 Sound Controls Manual Sound Controls This function allows you to manually adjust the audio settings to your preferred levels. 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select desired picture option. (Bass, Treble, Balance) 3. Press the OK button and then press the Left or Right button to make appropriate adjustments. Video Audio TV Setup Bass This adjusts the range of the low pitch sound. Treble This adjusts the range of the high pitch sound. Balance Adjusts the left to right sound balance between the built-in speakers. 42 40 40 Voice Off Off F G F G F G Parental Audio Balance 4. Press the MENU button to return to the previous menu. Balance Bass Treble Sound Mode Digital Output Auto Volume Control ENTER Adjust Select MENU Back Sound Controls Digital Output This option activates Digital Audio Output. This is recommended for use with other devices capable of receiving digital audio signals. (This mode is set to Off by default) 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select Digital Output. Video Audio TV Setup Balance Bass Treble Sound Mode Digital Output Auto Volume Control 40 40 Voice Off Off F G F G F G Parental 3. Press the Left or Right button to select Off, Dolby Digital or PCM. Audio Select MENU Back 4. Press the MENU button to return to the previous menu. Off Television will only output an Analog audio signal. (This mode is set to Off by default) Dolby Digital Television will output a digital audio signal. PCM (Pulse-code modulation) This mode creates a digital representation of an analog siginal and is only used with an audio CD signal.This product is under license of Dolby Laboratories. The “Dolby” or D symbol is a trademark of Dolby Laboratories. 43 Sound Controls Auto Volume Control This function automatically stabilizes the volume level while changing to channels with different audio levels. 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select Auto Volume Control. Video Audio TV Setup Balance Bass Treble Sound Mode Digital Output Auto Volume Control 40 40 Voice Off Off F G F G F G Parental 3. Press the Left or Right button to select On or Off. Audio Select MENU Back 4. Press the MENU button to return to the previous menu. Stereo/SAP Broadcast Setup This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that the station may transmit. The television will automically switch to Mono sound if the broadcasted channel is transmitted in Mono. Also, you can manually select Mono if you want to listen to a stereo or SAP broadcasted channel in Mono. 1. Use the MTS button to select your desired MTS mode in analog signal. Each time you press the MTS button, Mono, Stereo, or SAP appear in turn. If other languages available on the digital signal, select them with the MTS button. 2. Press EXIT button to save and return to TV viewing. 44 Time Setting Time Zone Setting You can set the Time Zone for your local area. This is operated from the Auto Synchronization. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Down or Up button to select Time Zone. 4. Press the Left or Right button to select your viewing area time zone. (Eastern Time, Indiana, Central Time, Mountain Time, Arizona, Pacific Time, Alaska, Hawaii) 5. Press the MENU button to return to the previous menu. Setup Video Audio ENTER Enter Time Zone Time Sleep Timer Select MENU Back Eastern Time F G Off F G TV Setup Parental Time Setup Select MENU Back 45 Time Setting Auto Time Setting The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the time manually if the current time is set incorrectly by the Auto Synchronization function. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Down or Up button to select Time. Setup 4. Press the OK button and then press the Down or Up button to select Auto Synchronization. Video Audio ENTER Enter Time Zone Time Sleep Timer Select MENU Back Eastern Time F G Off F G TV 5. Press the Left or Right button to select On. Setup Parental 6. Press the MENU button to return to the previous menu. Time Setup ENTER Enter Video Auto Synchronization Date Time Audio Select MENU Back On 2008/01/01 00:00:00 F G Off 00:00:00 00:00:00 F G TV Setup Parental Time Timer Power On Timer Power Off Timer Select NOTE - If Auto Synchronization is selected to On, Date and Time menus are cannot be adjusted. 46 MENU Back Time Setting Manual Time Setting If the current time setting is wrong, this function allows you to set the clock manually. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Down or Up button to select Time. Setup 4. Press the OK button and then press the Down or Up button to select Auto Synchronization. Video Audio ENTER Enter Time Zone Time Sleep Timer Select MENU Back Eastern Time F G Off F G TV 5. Press the Left or Right button to select Off. Setup Parental 6. Press the Down or Up button to select Date or Time. 7. Press the Left or Right button to move the position and use number buttons to set present date or time. Time Setup ENTER Enter Video Auto Synchronization Date Time Audio Select MENU Back Off 2008/01/01 00:00:00 F G Off 00:00:00 00:00:00 F G TV 8. Press the MENU button to return to the previous menu. Setup Parental Time Timer Power On Timer Power Off Timer Select MENU Back 47 Time Setting Auto On/Off Time Setting The timer function operates only if the current time has been set. The TV turns on/off automatically with the Power On/Off Timer function. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Down or Up button to select Time. Setup 4. Press the OK button and then press the Down or Up button to select Timer. Video Audio ENTER Enter Time Zone Time Sleep Timer Select MENU Back Eastern Time F G Off F G TV 5. Press the Left or Right button to select On. If Timer is selected to Off, Power On Timer and Power Off Timer menu are cannot be adjusted. Parental 6. Press the Down or Up button to select Power On Timer or Power Off Timer. 7. Press the Left or Right button to move the position and use number buttons to set TV on or off time. Setup Time Setup ENTER Enter Video Auto Synchronization Date Time Audio 48 MENU Back Off 2008/01/01 00:00:00 F G Off 00:00:00 00:00:00 F G TV Setup Parental 8. Press the MENU button to return to the previous menu. Select Time Timer Power On Timer Power Off Timer Select MENU Back Time Setting Sleep Timer The sleep timer automatically switches the set to standby after the preset time elapses. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Down or Up button to select Sleep Timer. 4. Press the Left or Right button to select desired sleep time. The timer begins to count down from the number of minutes selected. 5. Press the MENU button to return to the previous menu. Setup Video Audio ENTER Enter Time Zone Time Sleep Timer Select MENU Back Eastern Time F G Off F G TV Setup Parental Time Setup Select MENU Back NOTE - If you want to select Sleep Timer directly, press the SLEEP button. - Every time you press the button, it will switch between Off, 5, 10, 15, 30, 45, 60, 90, 120, 180 and 240. 49 Captions Closed Caption-Analog The Analog Caption function operates when watching regular analog channels. Analog caption displays information at any position on the screen and is usually the program’s dialog. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Caption. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Down or Up button to select Analog Closed Caption. Setup 4. Press the Left or Right button repeatedly to select Off, CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3 or TEXT4. Video Audio TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. NOTE - If you want to select Caption directly, press the CC button. 50 MENU Off Off Back F G F G Setup Parental Caption Caption The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. Analog Closed Caption Digital Closed Caption Digital Caption Style Select TV 5. Press the MENU button to return to the previous menu. ENTER Enter Select MENU Back Captions Closed Caption-Digital The Digital Caption function only operates on digital channels. Choose the language you want the DTV captions to appear in. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Caption. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Down or Up button to select Digital Closed Caption. Setup 4. Press the Left or Right button repeatedly to select Off, SERVICE1, SERVICE2, SERVICE3, SERVICE4, SERVICE5 or SERVICE6. Video Audio Analog Closed Caption Digital Closed Caption Digital Caption Style Select MENU Off Off Back F G F G TV 5. Press the MENU button to return to the previous menu. ENTER Enter Setup Parental Caption Select MENU Back 51 Captions Closed Caption Options Customize the DTV captions that appear on your screen. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Caption. Video Audio Analog Closed Caption Digital Closed Caption Digital Caption Style Off Off F G F G TV Setup Parental 3. Press the OK button and then press the Down or Up button to select Digital Caption Style. Caption 4. Press the OK button and then press the Down or Up button to select Caption Style. Video Audio TV 5. Press the Left or Right button to select Custom. 6. Press the Down or Up button to select desired caption option. (Font Size, Font Color, Font Opacity, Background Color, Background Opacity, Window Color, Window Opacity) Setup Parental ENTER Enter Caption Style Font Size Font Color Font Opacity Background Color Background Opacity Window Color Window Opacity Digital Caption Style Select MENU Custom Large White Solid Black Solid Black Trasparent Select MENU 7. Press the Left or Right button to customize your preference. 8. Press the MENU button to return to the previous menu. Font Size Set the size the words will appear in. Background Opacity Select the opacity for the background color. Font Color Choose a color for the text. Window Color Select a color for the edges. Font Opacity Specify the opacity for the text color. Window Opacity Select the opacity for the edges. Background Color Select a background color. NOTE - If Caption Style is selected to As Broadcaster, Caption Options are cannot be adjusted. 52 Back F G F G F G F G F G F G F G F G Back Reset Reset Default Use to quickly reset all the menu options to their original factory preset values. This function deletes all TV channels. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Reset Default. Video Audio TV OSD Language Time Setup Caption Reset Default English F G Setup Parental 3. Press the OK button and then press the Left or Right button to select OK. Setup ENTER Enter 4. Press the OK button to reset. 5. Reset the menu options to original values. Select MENU Back Are you sure? OK Cancel 6. Press the MENU button to return to the previous menu. 53 Parental Control Enter your password Parental Control can be used to block specific channels, ratings and other viewing sources. Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. 1. Press the MENU button and then press the Down or Up button to select the Parental. Video Password Audio TV 2. Press the OK button and then enter password as requested. Setup Parental 3. The TV is set up with the initial password “0-0-0-0”. Parental MENU Back Set Password Change the password by inputting a new password twice. 1. After inputting the password, press the Down or Up button to select Change Password. 2. Press the OK button and then select any 4 digits for your new password and enter the them on the New Password. Video Audio Program Block Change Password Clean All TV Setup 3. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm Password. Parental Parental Video 4. Then your changed password has been memorized. Audio ENTER Enter Select MENU Back MENU Back New Password Confirm Password TV Setup 5. Press the MENU button to return to the previous menu. Parental Change Password 54 Parental Control Rating Enable/Disable Enables or disables the blocking scheme you set up previously. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All TV 2. Press the OK button and then press the Down or Up button to select Rating Enable. Setup 3. Press the Left or Right button to select On or Off. When you select On, the Program Block menus are enable. Parental Parental Video 4. Press the MENU button to return to the previous menu. Audio TV Setup ENTER Enter Rating Enable U.S. TV Ratings U.S. Movie Ratings Canadian English Ratings Canadian French Ratings Open V-Chip Select MENU On Back F G Parental Program Block Select MENU Back 55 Parental Control TV Ratings for USA Prevents children from watching certain TV programs, according to the rating limits set. The children rating will not apply to TV programs until you select the ratings you want to be blocked. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All TV 2. Press the OK button and then press the Down or Up button to select U.S. TV Ratings. Setup Parental 3. Press the OK button. Parental 4. Press the Down or Up or Left or Right buttons to choose and OK button to set up the menu options for U.S. TV Ratings. Video Audio TV 5. Press the MENU button to return to the previous menu. Setup ENTER Enter Rating Enable U.S. TV Ratings U.S. Movie Ratings Canadian English Ratings Canadian French Ratings Open V-Chip ENTER Enter On Back F G Audio TV Setup Parental Select Back TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Allowed Rating U.S TV Ratings MENU A D L S V FV Video 56 MENU Parental Program Block Select ENTER Set Blocked Rating Select MENU Back Parental Control TV (FCC) Age Categories TV-MA Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit sexual content. TV-G General audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations. TV-14 Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence. TV-Y7 Directed for older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. TV-PG Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some suggestive sexual dialog and situations. TV-Y All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two – six. TV (FCC) Content Sub-Categories: D: L: S: V: FV: Dialog...sexual innuendo. Offensive language. Sexual Situation Violence. Fantasy or cartoon violence. 57 Parental Control Movie Ratings Blocks movies according to the movie ratings limits specified so children cannot view certain movies. Applies to movies broadcasted on TV and allows you to select which ratings you want blocked. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All TV 2. Press the OK button and then press the Down or Up button to select U.S. Movie Ratings. Setup Parental 3. Press the OK button. Parental 4. Press the Down or Up buttons to choose and OK button to set up the menu options for U.S. Movie Ratings. Video Audio TV 5. Press the MENU button to return to the previous menu. Setup The MPAA Rating System (Movies) Video Audio PG Parental guidance suggested. PG-13 Parents strongly cautioned. Restricted. TV Setup Rating Enable U.S. TV Ratings U.S. Movie Ratings Canadian English Ratings Canadian French Ratings Open V-Chip Select MENU On F G Parental ENTER Enter MENU Back PG PG-13 NC-17 Allowed Rating U.S Movie Ratings Select ENTER Set Blocked Rating Select MENU NC-17 No one 17 and under admitted. Adults only. NOTE - If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. 58 Back Parental Program Block General Audience. ENTER Enter Back Parental Control TV Rating English for Canada Selecting canadian english language rating system. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All TV 2. Press the OK button and then press the Down or Up button to select Canadian English Ratings. Setup Parental 3. Press the OK button. Parental 4. Press the Down or Up buttons to choose and OK button to set up the menu options for Canadian English Ratings. Video Audio TV 5. Press the MENU button to return to the previous menu. Setup Canadian English Ratings ENTER Enter Rating Enable U.S. TV Ratings U.S. Movie Ratings Canadian English Ratings Canadian French Ratings Open V-Chip Video Audio TV C8+ Children eight years and older Setup General programming, suitable for all audiences Back MENU On F G Parental Program Block Children Select Parental ENTER Enter Back MENU C8+ PG 14+ 18+ Allowed Rating Canadian English Ratings Select ENTER Set Blocked Rating Select MENU Back PG Parental Guidance 14+ Viewers 14 years and older 18+ Adult programming 59 Parental Control TV Rating French for Canada Selecting canadian french language rating system. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All TV 2. Press the OK button and then press the Down or Up button to select Canadian French Ratings. Setup Parental 3. Press the OK button. Parental 4. Press the Down or Up buttons to choose and OK button to set up the menu options for Canadian French Ratings. Video Audio TV 5. Press the MENU button to return to the previous menu. Setup Canadian French Ratings ENTER Enter Rating Enable U.S. TV Ratings U.S. Movie Ratings Canadian English Ratings Canadian French Ratings Open V-Chip Video Audio TV 8 ans+ General-Not convenient for little children Setup 13 ans+ Not convenient for children of 13 years and younger 16 ans+ Not convenient for children of 16 years and younger 18 ans+ This programs is only for adult 60 MENU On Back F G Parental Program Block General Select ENTER Enter Select MENU Back 8 ans+ 13 ans+ 16 ans+ 18 ans+ Parental Allowed Rating Canadian French Ratings ENTER Set Blocked Rating Select MENU Back Parental Control Downloadable Rating Your TV’s OSD (On Screen Display) may differ slightly from what is shown in this manual. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All TV 2. Press the OK button and then press the Down or Up button to select Open V-Chip. Setup Parental 3. Press the OK button twice. Parental 4. Press the Down or Up buttons to choose the menu options for Open V-Chip. Video Audio 5. Press the OK button. TV Setup 6. Press the MENU button to return to the previous menu. ENTER Enter Rating Enable U.S. TV Ratings U.S. Movie Ratings Canadian English Ratings Canadian French Ratings Open V-Chip Select MENU On Back F G Parental Program Block Video ENTER Enter Select MENU U.S.(50 States+Possessions) Back Audio TV Setup Parental Open V-Chip ENTER Enter Select MENU Back NOTE - This function may become available in the future and will be available only for digital channel signal. - This function operates only when TV has received Region5 Rating data. 61 Parental Control Clean All Use to quickly clean the Program Block menu options. 1. After inputting the password, press the Down or Up button to choose Clean All. Video Audio Setup Parental Parental ENTER Enter 4. Press the MENU button to return to the previous menu. Select Are you sure? OK 62 TV 2. Press the OK button and then press the Left or Right button to select OK. 3. Press the OK button to clean the Program Block menu options. Program Block Change Password Clean All Cancel MENU Back Setting the PC Mode Auto Picture Controls Picture Mode adjusts the set for the best picture appearance. Select the preset value in the Picture Mode menu. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select Picture Mode. 3. Press the Left or Right button to select Soft, Standard, Vivid or User. Video Audio Setup Parental Picture Mode Brightness Contrast HUE Color Temperature Advanced Video VGA Video User F G 60 50 Select MENU Back 4. Press the MENU button to return to the previous menu. Soft Select this option to display with a soft image. Standard The most general and natural screen display status. Vivid Select this option to display with a sharp image. User Select this option to use the user-defined setting. NOTE - Select the VGA mode by pressing SOURCE button. - If you want to select Picture Mode directly, press the button. - Every time you press the button, it will switch between Soft, Standard, Vivid or User. - When you adjust Brightness, Contrast, HUE, Picture Mode changes to User. 63 Setting the PC Mode Manual Picture Controls You can adjust picture Brightness, Contrast and HUE to the levels you prefer. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select desired picture option. (Brightness, Contrast, HUE) 3. Press the OK button and then press the Left or Right button again to make appropriate adjustments. 4. Press the MENU button to return to the previous menu. Brightness Increases or decreases amount of white in the your picture. Contrast Adjusts the difference between the light and dark levels in the picture. HUE Adjusts the balance between red and green levels. NOTE - Select the VGA mode by pressing SOURCE button. 64 Video Audio Setup Parental Video Brightness Picture Mode Brightness Contrast HUE Color Temperature Advanced Video VGA ENTER Adjust User F G 60 50 Select MENU Back 60 Setting the PC Mode Color Temperature Adjusts the display to your desired color temperature. 1. Press the MENU button and then press the Down or Up button to select the Video. Audio Setup 2. Press the OK button and then press the Down or Up button to select Color Temperature. Parental 3. Press the OK button and then press the Left or Right button to select Cool, Standard, Warm or User. Video 4. Press the Down or Up button to select desired color item. Video Video Audio Setup Picture Mode Brightness Contrast HUE Color Temperature Advanced Video VGA ENTER Enter Color Temperature R Gain G Gain B Gain User F G 60 50 Select MENU Standard Back F G Parental 5. Press the OK button and then press the Left or Right button to make appropriate adjustments. 6. Press the MENU button to return to the previous menu. Color Temperature Select MENU Back R Gain NOTE - When you adjust R Gain, G Gain, B Gain or Color Temperature change Picture Mode to User. 65 Setting the PC Mode Auto Adjustment This function is for the automatic adjustment of the screen position, clock, phase and scale in pc mode. The displayed image will disappear for a few seconds while the auto configuration is in progress. Although the image is still not correct, your set is functioning properly but needs further adjustment. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio Setup 2. Press the OK button and then press the Down or Up button to select VGA. Parental 3. Press the OK button and then press the Down or Up button to select Auto Adjust. 4. Press the OK button to start auto adjust. Video Video Audio 5. If picture needs to be adjusted more after Auto Adjust, you can adjust manually. Setup Parental Picture Mode Brightness Contrast HUE Color Temperature Advanced Video VGA ENTER Enter Custom F G 60 50 Select MENU Auto Adjust H.Position V.Position Phase Clock Back 60 50 100 For more information on Manual Adjust, refer to the next page. VGA 66 ENTER Enter Select MENU Back Setting the PC Mode Manual Adjustment If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. To correct the screen size, adjust Clock. 1. Press the MENU button and then press the Down or Up button to select the Video. Video Audio Setup 2. Press the OK button and then press the Down or Up button to select VGA. Parental 3. Press the OK button and then press the Down or Up button to select H.Position or V.Position. 4. Press the OK button and then press the Left or Right button to make appropriate adjustments. Video Video Audio Setup 5. Press the Down or Up button to select Phase or Clock. 6. Press the OK button and then press the Left or Right button to make appropriate adjustments. 7. Press the MENU button to return to the previous menu. Parental VGA Picture Mode Brightness Contrast HUE Color Temperature Advanced Video VGA ENTER Enter F G 60 50 Select MENU Auto Adjust H.Position V.Position Phase Clock ENTER Adjust H.Position Custom Back 60 50 100 Select MENU Back 60 H.Position This function is to adjust horizontal position of screen. V.Position This function is to adjust vertical position of screen. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. 67 Special Functions Picture Format You can watch the screen in various picture formats; 4:3, ZOOM, Auto, Full. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. Repeatedly press the ZOOM button to select your desired picture format. 4:3 Following selection will lead you to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. ZOOM When your set receives the wide screen signal, when selected it will adjust the picture horizontally, in nonlinear proportion, to fill the entire screen. Auto When your set receives the wide screen signal, it will change automatically the picture format that has been sent. Full You can enjoy the cinema or general TV program through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full. NOTE - You can only select 4:3, Zoom, Auto and Full below 480p. - You can only select 4:3 and Full above 720p. - You can only select 4:3 and Full in VGA mode. 68 Specification Model LT32U41H LT37U41H Horizontal 796.0 mm 915.0 mm Height 583.0 mm 682.0 mm Thickness 233.0 mm 330.0 mm 14.3 kg 22 kg 1,000:1 typical 1,000:1 typical 500 cd/m2 typical 500 cd/m2 typical 1366 (H) x 768 (V) 1366 (H) x 768 (V) Display Color 16.7M colors 16.7M colors Audio Output 2.5W + 2.5W 2.5W + 2.5W Consumption 135W 175W Dimension Weight Contrast Ratio Brightness Panel Resolution External Port HDMI / DVI IN AUDIO IN (RGB / DVI) RGB IN(PC) ANTENNA / CABLE IN COMPONENT IN S-VIDEO IN AV IN DIGITAL AUDIO OUT (COAXIAL) AC IN 69 Troubleshooting Problem No picture on screen. Check Point The remote control doesn’t work. Picture appears slowly, after switching on. No or Poor color Horizontal/Vertical bars or picture shaking Unusual sound from inside the set. 70 Check whether the set is turned on. Power cord inserted into wall outlet? Test if there is power coming from the wall outlet by plugging in another product into the wall outlet where the set’s power cord was plugged in. Check to see if there is any object between the set and the remote control causing obstruction. Check to see if the batteries are installed with the correct polarities. Install new batteries. This is normal as the image is muted during the start up process of the set. Please contact your service center, if the picture has not appeared after five minutes. Select color in the Picture menu and press the Left or Right button. Check for local interference such as a nearby electrical appliance or power tool. A change in ambient humidity or temperature may result in an unusual noise at the time of switching off or on of the set and does not indicate a fault with the set. MEMO 71 DIGITAL TV P/NO : 3350GDKM0058A GPN08MA033D
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 72 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:7119dfa5-7694-43ef-bd88-ec9d4c8ae769 Producer : Acrobat Distiller 5.0.5 for Macintosh Create Date : 2008:08:12 06:05:52Z Modify Date : 2008:08:12 15:43:07+09:00 Metadata Date : 2008:08:12 15:43:07+09:00 Creator Tool : QuarkXPress.3.3E: LaserWriter 8 Z1-8.7.1 Document ID : uuid:492a4746-07b6-4a19-b0f4-cc986ba6b8e1 Format : application/pdf Creator : mac3 Title : 033D_sam Author : mac3EXIF Metadata provided by EXIF.tools