KIMIN Electronics RJP-100M REMOTE JACK PACK User Manual User s Manual H
Kimin Electronic Co., Ltd REMOTE JACK PACK User s Manual H
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 562637 |
| Application ID | pluQik+L6ayZepgohgkAmQ== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.09kB (251111 bits) |
| Date Submitted | 2005-07-18 00:00:00 |
| Date Available | 2005-07-18 00:00:00 |
| Creation Date | 2005-07-12 13:24:31 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-07-18 10:20:53 |
| Document Title | Microsoft Word - User_s Manual_H_.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | choi |
Test Report No.: GETEC-E3-05-052 FCC Class B Certification APPENDIX H : USER’S MANUAL EUT Type: RJP-100M FCC ID: TGERJP-100M RJP-100M Remote Jack Pack Installation & Setup Guide Warranty © Copyright 2005, LG Electronics U.S.A., Inc. For Customer Support/Service, please call: 1-888-865-3026 www.lgcommercial.com The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK - - USE ONLY INDOORS ATTENTION: RISQUE DE CHOCS ÉLECTRIQUE - - POUR INSTALLATION À L¡¯INTÉRIEUR SEULEMENT WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. L’appareil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et de plus qu’aucun objet rempli de liquide tel que des vases ne doit être placé sur l’appareil. REGULATORY INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way (except as noted herein) without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is: LG Electronics U.S.A., Inc., 2000 Millbrook Drive Lincolnshire, IL 60069, USA • Phone: 1-847-941-8000. Note: Design and specifications are subject to change without prior notice. Marketed and Distributed in the United States by LG Electronics U.S.A., Inc. 2000 Millbrook Drive, Lincolnshire, IL 60069 © Copyright 2005, LG Electronics U.S.A., Inc. 206-4010 S TO RES ES ET PR Overview PHONE NETWORK AUDIO IN AUDIO IN VIDEO IN S-VIDEO IN PC VIDEO IN DIGITAL VIDEO IN USB IN 10 AMP MAXIMUM CURRENT The Remote Jack Pack (RJP) contains circuitry to determine the presence of a signal at each input jack. (Note: The initial implementation only monitors the right audio input of each audio source.) When a signal is detected, it’s priority is compared to the priority of other sources which may be present. Control signals from the RJP to the display panel change state, if the new active source is of higher priority than the existing source, to direct the display panel to proper source. Video and audio are monitored and switched independently. Power is supplied to the RJP by the display panel via the control signal cable. 206-4010 Overview (Contd.) CLEANING CAUTION: Since the end user jackpack is exposed, use extreme caution when cleaning. Do not use liquid cleaners on the connections panel. Do not allow liquids to be spilled, sprayed onto or otherwise come into contact with the connections panel on both the end user side and the installer side. Clean with a slightly damp cloth. 10 AMPS MAXIMUM TO ALL FOUR AC OUTLETS: The maximum combined total current that is allowable to the 4 AC power outlets is 10 Amps. These are protected by a circuit breaker type re-setable fuse. Introduction Conveniently installed right in the room where guests will stay, the LG Remote Jack Pack, multi-media interface is available to end users to connect audio, video and computer devices to hear and view on the in-room TV display panel. The RJP-100M can be set up to interface with the TV display panel to show the image and/or sound from a portable DVD/CD Player, Camcorder, MP-3 Player, Notebook computer, or portable Video Game Player. Or, devices with digital video outputs such as DVD players. A USB-2.0 connection is available for future applications. If the end user does not connect any devices, then the in-room TV display panel will remain on the source selected. When the end user connects a device, the interface switches the TV display panel to the new source. Satellite radio may be available at some locations. Users can charge laptops or cell phones while watching TV. The RJP-100M interface is designed to be able to process audio from one source, and video separately from a different source, if required. (A user can do work on a laptop PC and hear music from an MP-3 player.) However, only one audio and one video source can be heard/seen at the same time. The user simply plugs the device’s power cord into one of the four convenience AC power outlets provided on the RJP-100M. Turns the device on and the RJP-100M switches to the newly-connected audio and/or video source. No end user menus are involved, connections are made directly to the interface. The RJP-100M continually monitors the signal of the source inputs. When a signal is detected, (a device is plugged into one of the source inputs) the interface sends a message to the TV display panel which then switches to the newly-connected source. The interface sends the audio and video so that it can be heard and seen on the TV display panel. 12-Volt DC power is supplied from the TV display panel to operate the interface via the control cable. 206-4010 Installer Connections CAUTION: Be sure power is turned off before attempting to connect remote jack pack to the TV display panel and in-room resources. Cable Assembly USB OUT DIGITAL VIDEO OUT RGB OUT CONTROL OUT VIDEO AUDIO OUT OUT R REMOTE AUDIO NETWORK PHONE IN OUT OUT .......... USB Cable For future applications. Digital Video Cable Connect to TV display panel. RGB Computer Cable Connect to TV display panel RGB input. Control 8-Pin RJ45 Cable w/Yellow Sleeve Connect to RJP input port on TV display panel. Audio/Video Cables Connect composite Audio/Video outputs to TV display panel. 206-4010 AC Power Cord Connect to 120V 60 Hz AC power outlet. Supplies power to the four convenience AC power outlets for end user. (Maximum total output to all 4 outlets is 10 Amps.) 6-Pin RJ11 Phone Cable Connect to telephone line wall jack panel. 8-Pin RJ45 Network Cable LAN server input. Remote Satellite Radio 3.5 mm Mini-Plug Cable Connect to satellite radio and other remote audio products. System Installation Connect the multi-media interface to the TV display panel and other control devices (if applicable) using the output ports and jacks available on the back panel. A brief description of each connection available is provided below. USB Output Port For future applications--e.g., digital cameras and flash drives. Digital Video Output Connect to digital video input port on TV display panel to allow user to show DVD’s high-resolution digital video on the in-room TV. Computer RGB Output Connect to RGB input port on TV display panel to allow user to show a PC/Laptop image on the in-room TV. Control 8-Pin RJ-45 Output Port Data link. Connection to TV display panel for control and power supply for interface. Audio/Video Output Jacks Connect to composite R-Audio-L / Video input on TV display panel. Audio Mini Plug Input Input connection for remote satellite radio source. Connect to satellite radio or any other remote audio source as needed. 8-Pin RJ-45 Output Port Output port to allow access to local area network server if available. Allows the end user to access the LAN (local area network) of the institution. 6-Pin RJ-11 Output Port Output port available for connection to telephone line wall jack panel. Using a computer modem, allows the end user to access the Internet through a local phone line. AC Power Cord Connect to standard 120V 60Hz AC power outlet. (Four 120 Volt 60 Hz AC power outlets are provided for the end user. However, 10 Amps. is the maximum output to all four AC power outlets.) 206-4010 System Installation: Cables Required for RJP-100M Note: Connector set near mesh sleeving hooks up to TV display panel. In order to use the remote jack pack, the TV display panel and the following cables will need to be connected to both the RJP-100M and resources available in room. The following cables are included in the cable assembly bundle .......... ...... . ............. . ... USB 2.0 Cable Typical “Mini-B” male, connect to USB host. Digital Video Cable Connect to high definition digital video input on TV display panel. RGB Computer Cable 15-pin standard PC computer cable of sufficient length to connect interface to TV display panel. 8-Pin RJ-45 Cable (with Yellow Protective Sleeve) Connects to RJ-45 control input port on TV display panel. Display panel supplies DC power to operate RJP-100M. Audio/Video Cables 1-Set of standard composite R-Audio-L / Video cables to connect to TV display panel’s composite audio/video input jacks. The following cables are separate 6-Pin RJ-11 Cable 1 cable of sufficient length for connection to room telephone line wall jack panel. 8-Pin RJ-45 Cable 1 cable of sufficient length to connect to RJ-45 wall LAN network jack, if available in hotel. AC Power Cord Connect to a standard 120V 60Hz AC power outlet. 206-4010 End User Connections Overview The end user simply plugs a device into the connection panel interface, such as a laptop PC as shown in the example below. The remote jack pack senses the connection and switches the TV to the new input source. The end user device’s sound and image are then displayed on the TV display panel. The TV display panel adjusts automatically to the computer output format. When the laptop is disconnected, the interface allows the TV to revert back to the previous source for video and audio. The end user has several audio/video format options available for connecting external devices. A user can connect a portable DVD Player, CD Player, Camcorder, MP-3 Player, Notebook computer, Portable Video Game Player etc. For added convenience, four AC power outlets are also available on the front of the interface to provide power for these external devices and/or recharge laptop or cell phone batteries. (The maximum load for all four is 10 Amps.) A user could connect and hear audio from one device and connect and view video from a different device. Two stereo audio inputs are available that accept different audio plug formats. However, they are both internally connected to the same audio circuitry. Therefore, only the highest priority audio source can be heard. Typical In-room TV Display Panel S TO RES ES ET PR Today's Report 10 AMP MAXIMUM CURRENT PHONE NETWORK AUDIO IN AUDIO IN RIGHT LEFT VIDEO S-VIDEO IN PC VIDEO IN USB IN DIGITAL VIDEO IN IN End User Connection Panel 's Today Report USB IN IN VIDEO DIGITAL IN PC VIDEO IN S-VIDEO VIDEO IN AUDIO LEFT IN IN RIGHT VIDEO AUDIO OUT OUT R NETWOR REMOTE AUDIO NETWORK PHONE IN OUT OUT PHONE CONTROL OUT TO RESE PR RGB OUT DIGITAL VIDEO OUT ® AUDIO USB OUT 10 USE DO NT POTS CURRE UM COFFEE OR MAXIM AMP CAUTIO IRONS S, DRYER HAIR WITH NOT Connection Panel Outputs to TV Display Panel In-Room Sources 206-4010 End-User Multi-Media Interface Connections USB-2.0 Input Port For future applications. S TO RES ES ET PR Reset Switch Circuit breaker for AC power outlets. 10 AMP MAXIMUM CURRENT AC Power Outlets Four (4) convenience AC outlets for end-user. (Total output 10 Amps maximum.) Phone RJ11 Port Connection available for end user to plug into room’s phone line. Network RJ-45 Port Port for access to institution’s local area network server, if available. 3.5 mm Audio Mini-Plug Input Connect MP-3 player or computer audio here. 206-4010 PHONE NETWORK AUDIO IN AUDIO IN RIGHT LEFT VIDEO S-VIDEO IN PC VIDEO IN DIGITAL VIDEO IN USB IN IN Digital Video Input Port Connect portable DVD sources with digital video output here. RGB PC Video Input Port Connect portable notebook or PC laptop here. S-Video Input Port Connect S-Video (Y-C) device here. Audio/Video Input Jacks Connect composite Audio/Video output from end-user external device here. End-User Connectable External Source Devices Examples of devices a user can connect are shown to the right. There are four AC power outlets available on the jack pack for added convenience. The end-user can connect: PC Laptop/Notebook Computers Portable Video Game Players Portable DVD/CD Players Camcorders Digital Cameras MP-3 Audio Players USB Flash Drives and other USB devices Digital Video Compatible Note: The RJP-100M is digital video compatible. It is capable of interfacing with DVD players that have digital video output. 10 206-4010 Reference 12-Foot Output Cable Assembly Connect to Inputs on Display Panel RGB Sleeve DIGITAL VIDEO . ........ .............. . USB-2.0 (For Future Applications) ... ....... AUDIO VIDEO CONTROL w/Yellow R-L USB-2.0 "Mini-B" Male 5-Pin Note: Connector set near mesh sleeving hooks up to TV display panel. 14" 7. Cable Tie Mesh Sleeving 36" Output Cable Assembly Parts List Item Description No. 1. Composite RCA type Plugs Audio R-L Cables. 2. Composite RCA type Plugs Video Cable. 3. RJ-45 Control Out Cable w/Yellow Protective Sleeves. 4. RGB Cable. 5. Digital Video Cable. 6. USB-2.0 Cable. 7. Cable Ties. 82" Output Cable Assembly is 12.0 Feet in Length 12" .......... 2. 1. 3. AUDIO VIDEO CONTROL R-L w/Yellow 4. RGB 5. DIGITAL VIDEO USB-2.0 "A-Style" Male 4-Pin 6. USB-2.0 Sleeve Connect to Outputs on RJP-100M Jackpack 206-4010 11 Specifications Application Makes available to the hotel’s guests, a multi-media interface to the in-room TV display panel and media resources. Jacks are provided for external portable devices such as DVD/CD Players, Laptop Computers, Camcorders, etc. Dimensions Height Width Depth End-User Device Inputs AC Outlets x 4 Phone 4.10 Inches 15.00 Inches 2.1 Inches AC 120V 60Hz (Maximum 10 Amps. total output for all four AC outlets) 6-Pin RJ-11 Phone Jack Network 8-Pin RJ-45 Communications Jack Audio In 3.5mm Mini Plug Audio In L-R Video In S-Video In PC Video In Digital Video In USB-2.0 In Left/Right Audio RCA Type Composite Jacks (Nom In: 250mV RMS @ 22K ohms) Overload In: 1.6V RMS Max Video RCA Type Composite Jack 1 Vpp, 75 ohms Y-C Connector Y=1 Vpp, 75 ohms. C=0.3 Vpp Color Burst, 75 ohms RGB 15-pin VGA Type Computer Connector Digital Video Connector for digital video devices, e.g., DVD Players etc. USB Connector - USB-2.0 Environmental Parameters Operating Temperature 0 to 40 Degrees Celsius (32 to 104 Degrees Fahrenheit) Storage Temperature Cooling 12 Humidity -20 to 85 Degrees Celsius (-4 to 185 Degrees Fahrenheit) Free Air Convection 10% to 90% Non-condensing 206-4010 Specifications Outputs to TV Display Panel & In-Room Resources USB-2.0 Out Digital Video Out RGB OUT Control Out Video Out Audio Out R-L Remote Audio In Network Out Phone Out USB-2.0 Connector Digital Video Connector Digital Video Specs. Ver 1.1, All ATSC Formats RGB 15-pin VGA Type Computer Connector 8-Pin RJ-45 Communications Jack with Yellow Protective Sleeve 1 Vpp into 75 ohms, Composite or Y+C Combined RCA Type Composite Video Jack +/- 1 db @ 4.2 MHz Right/Left RCA Composite Audio Jacks Max: 1.6 V RMS (1 KHz) @ 600 ohms, Typ: 250mV RMS @ 600 ohms Audio 3.5 mm Mini Plug 8-Pin RJ-45 Communications Jack 6-Pin RJ-11 Phone Jack Regulatory UL, FCC Class B, Digital Video Device Supplied Accessories List (Cable Assembly) Note: All cables within cable bundle are 12 feet in length. USB-2.0 Cable Digital Video Cable 15-Pin VGA-Type Computer Cable 8-Pin RJ-45 Control Cable 1-Set A/V Cables with RCA Type Plugs (Separate Cables) 6-Pin RJ-11 Cable 8-Pin RJ-45 Network Cable 206-4010 13 Reference End User Audio/Video Input Priorities Note: The Highest Priority is listed first Audio 1. 2. 3. 4. Inputs/Sources 3.5 mm Mini Plug Audio Input L - R Audio RCA type Composite Jacks In-room Satellite Radio Audio TV Display Panel Tuner Audio (Audio Default) Video 1. 2. 3. 4. 5. Inputs Digital Video RGB S-Video Video In RCA type Composite jack TV Display Panel Tuner Video (Video Default) Direct Connections to Resources A. USB-2.0 B. LAN RJ-45 C. Phone RJ-11 14 206-4010 Notes 206-4010 15 LG RJP-100M Warranty Remote Jack Pack Welcome to the LG family! We believe that you will be pleased with your new LG product. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state within the U.S.A. LG’S RESPONSIBILITY Service Labor Parts Warranty Service Not Covered During a period of one year from effective warranty date, LG will provide service labor by an LG authorized service center when needed, as determined by the LG service center, as a result of manufacturing defects. New or remanufactured replacements for factory-defective parts will be supplied by an LG authorized service center for one year from effective warranty date (color picture tube — two years). Such replacement parts are warranted for the remaining portion of the original warranty period. Warranty service is provided in the institution in most cases. (Some repairs may require the unit to be taken by the servicer to the repair facility and returned, at no additional charge.) Call 1-888-865-3026 for further information. This warranty covers manufacturing defects and does not cover installation, adjustment of customer controls, installation or repair of antenna systems, cable converters or cable company-supplied equipment; it also does not cover damage due to misuse, abuse, negligence, acts of God or other causes beyond the control of LG. Any alteration of the product after manufacture voids this warranty in its entirety. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND LG SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS IN CONNECTION WITH THIS PRODUCT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. OWNER’S RESPONSIBILITY Effective Warranty Date Operating Guide Antenna Warranty Service Warranty begins on the date of installation of the Multi-Media Interface. For your convenience, keep the dealer’s dated bill of sale or delivery ticket as evidence of the purchase date. Read your Operating Guide carefully so that you will understand the operation of the TV and how to adjust the controls. Reception problems caused by inadequate antenna or faulty antenna connections are the owner’s responsibility. For warranty service information, call 1-888-865-3026. Parts and service labor that are LG’s responsibility (see above) will be provided without charge. Other service is at the owner’s expense. If you have any problem in obtaining satisfactory warranty service, call 1-888-865-3026. You must provide the model number, serial number and date of purchase or date of original installation. Before you ask for warranty service, read “Maintenance and Troubleshooting” in the operating guide. You might avoid a service call. For Customer Support/Service please call: 1-888-865-3026 www.lgcommercial.com LG Electronics U.S.A., Inc. 2000 Millbrook Drive Lincolnshire, IL 60069 206-4010 Issue-A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 17 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:f4310785-8022-4fca-818c-326f3a56cdbd Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2005:07:18 10:20:53+09:00 Create Date : 2005:07:12 13:24:31+09:00 Metadata Date : 2005:07:18 10:20:53+09:00 Document ID : uuid:5c4abe33-b545-473e-a0e2-7d182ec966e5 Format : application/pdf Title : Microsoft Word - User_s Manual_H_.doc Creator : choi Author : choiEXIF Metadata provided by EXIF.tools