KMW 849144415 800 MHz iDEN RRH User Manual iDEN800Mhz RRH User Guidex

KMW U.S.A., INC. 800 MHz iDEN RRH iDEN800Mhz RRH User Guidex

Contents

User Manual part 1 of 2

iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH UUUUser Guideser Guideser Guideser Guide iDEN 800MHz RRH User Guide Written by Reviewed by Approved by Joonyong Jang Michael Yoon Michael Yoon
iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH UUUUser Guideser Guideser Guideser Guide Index Contents 1. FCC Information ------------------------------------------------- 3 2. Test Environment ------------------------------------------------ 3 2.1. Preperation List ------------------------------------------ 3 2.2. Testing Environement Configuration --------------- 3 2.3. RRH Setup Procedure --------------------------------- 4 3. Network Configuration ----------------------------------------- 5 4. Operate GUI Program ----------------------------------------- 6
iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH1. FCC Information RF Exposure compliance must be addressed at the time of licensing 2. Test Environment 2.1. Preperation List • iDEN 800Mhz RRH (Remote Radio Head 800MHz)• PSU (Power Supply Unit)• BBU (Base Band Unit, Alacaltel Lucent)• Optic transceiver 2EA (Yellow• Optic Cable • RJ45 Ehternet Cable • Laptop computer for RRH GUI 2.2. Testing Environement Configuration iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH UUUUser Guideser Guideser Guideser Guide RF Exposure compliance must be addressed at the time of licensing. (Remote Radio Head 800MHz) (Power Supply Unit) (Base Band Unit, Alacaltel Lucent) Yellow- 1550nm, Blue- 1310nm) Laptop computer for RRH GUI Testing Environement Configuration
iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH UUUUser Guideser Guideser Guideser Guide • PSU Setting Table Voltage Current Limit Low : -38V 12 A Normal : -48V 9.5 A High : -57V 8 A 2.3. RRH Setup Procedure •••• Checke PSU Power 48V off •••• Connect PSU power to RRH Power connector •••• Connect BBU and RRH with Optic transceiver and Optic cable RRH side; Blue Transceiver (1310nm) BBU side; Yellow Transceiver (1550nm) •••• Turn on PSU to power up RRH •••• Make sure computer to join RRH and BBU network. If the computer joined the same network which BBU joined, it is able to access RRH network from the GUI.
iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH UUUUser Guideser Guideser Guideser Guide 3. Network Configuration • Setup computer network configuration IP: assigned by ALU (ex; 10.10.10.55) Subnet mask: 255.0.0.0 Default gateway: assigned by ALU (ex; 10.10.10.1) DNS: assigned by ALU • Test network configuration Windows Start > Run > CMD [Enter] C:\> ping RRH IP(10.14.0.196) [Enter]
iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH4. Operate GUI Program •••• Run RRH GUI Program. Input RRH’s IP and click the Connect button •••• Setup the carrier configuration on the index to turn oIf you want to make CDMA single carrier configuration, please follow below setting and click (A) SET button.Ex) 1FA setup with CDMA signam on Index 3 (Tx; 865.4MHz, Rx; 820.4MHz)Index : 3 STATE : [v] Enable TXCONTAINER : [v] 2 TX2CONTAINER : [v] 2 RX1CONTAINER : [v] 3 RX2CONTAINER : [v] 8 TXFREQ : [v] 865400 RXFREQ : [v] 820400 CARRTYPE : [v] 3G1X iDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRHiDEN 800MHz RRH UUUUser Guideser Guideser Guideser Guide Input RRH’s IP and click the Connect button Setup the carrier configuration on the index to turn on carrier power. If you want to make CDMA single carrier configuration, please follow below setting and click (A) SET button.Ex) 1FA setup with CDMA signam on Index 3 (Tx; 865.4MHz, Rx; 820.4MHz) If you want to make CDMA single carrier configuration, please follow below setting and click (A) SET button.

Navigation menu