KTV Global LT201CB 20.1" LCD TV Receiver User Manual
KTV Global Corporation 20.1" LCD TV Receiver Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 483420 |
| Application ID | S8WmvPrzD5eJLB8puK3cNg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 103.37kB (1292171 bits) |
| Date Submitted | 2004-10-29 00:00:00 |
| Date Available | 2004-10-29 00:00:00 |
| Creation Date | 2004-08-27 10:44:06 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2004-08-27 11:14:18 |
| Document Title | Users Manual |
User’s Manual TFT LCD TV Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet. Consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been moisture, does not operate normally, or has been dropped. 15) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Important Safety Instructions Regulatory Information Shock Hazard Marking and Associated Graphical Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Explanation of Safety Related Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. General safety precautions Contents Contents Front Panel 1 TV/VIDEO Displays a menu of the available input sources. (TV, Monitor) 2 MENU 3 - VOL + Display the main on-screen menu. Exit from sub-menu. Press the increase or decrease the volume. Also used to increase or reduce the value of a menu option. CH Press CH or CH to change channels. Also used to highlight selections on the on-screen menus. POWER Turns ON/OFF the LCD TV/Monitor. LED OFF : the color of LED is changed into RED. ON : the color of LED is changed into GREEN. Remote Control LED 10 Rear Panel ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ Accessory ▲ ▲ ▲ ▲ ▲ ▲ VHF/UHF ANTENNA JACK Connect to an antenna or a cable TV system. HEAD PHONE JACK DVD VIDEO (COMPONENT; Y,Pb,Pr) Video signals from a DVD player 4 DVD AUDIO Audio signals from DVD player when using the component video input jacks. 5 A/V IN Video & Audio signals from VCR or similar device. 6 S-VIDEO S-Video signal from an S-VHS VCR or Laserdisc player. 7 A/V OUT Out A/V signal from TFT LCD TV 8 PC AUDIO INPUT Connects to the sound-output port of a personal computer. 9 PC VIDEO INPUT Used to connect a video signal from a personal computer. 10 DC 15V IN To input DC power from power outlet. 11 Remote Control Unit Guidance of Basic Operation Connect either Antenna or Cable TV according to "ANTENNA CONNECTION" instruction on page 6. Insert batteries into the Remote Control unit according to "REMOTE CONTROL USE" instruction on page 5. Connect the power cord to AC outlet. – Voltage is between 90 and 250 Volts. – Frequency is compatible (50/60Hz) Numeric Buttons TURN ON/OFF THE TV 100 Button POWER POWER Display Button Power Button or Add/Del Button (Front panel) Volume Up( ) /Down( ) Button Quick View Button Channel Up( Sleep Button ) /Down( At stand-by mode, the LED stand-by indicator is in RED color. ) Button Menu Button PC Button TV/Video Button Auto Adjust Button TV/CATV Button Wide Button Picture Standard Button Mute Button Closed Caption Decoder Button Mts Button (Remote control) 1. Press the "POWER" button on the front panel or Press the "POWER" button on the Remote Control. 2. Press these buttons again to turn the television off. CHANNEL SELECTION Use CHANNEL ( ) buttons on the Remote Control (or CHANNEL ( ) buttons on the front panel). Pressing the ( ) button to advances for the higher channels, and press the ( ) button to go down for the lower channels. Sound Standard Button NOTE : Certain channels have been preset at the factory. It may be necessary to add or erase some channels in your areas. See "AUTO PROGRAM" on page 18 for presetting channels. Channels can be selected directly by using 10-Digit Keypad on the Remote Control. For example, if you select channel 5, press "0" first, then press "5". (Be sure to press "0" first, before pressing "5" for channel 5.) For channel 120, press the 100 button first, then press "2", "0". Also refer to the CABLE CHANNEL CONVERSION CHART below. 14 On Screen Language Selection CABLE TV CHANNEL CONVERSION CHART In addition to the normal TV reception from an antenna for VHF (Channels 2-13) and UHF (Channel 14-69), your TV set is equipped to receive non-scrambled cable TV channels. SubMid band (A-8, A-5-A-1), Mid band (A-I) Super band (J-W) Hyper band (W 1 - W 28) and Ultra band (W 29 - W 84) can be received by using the channel selections as shown in the following chart. A-8 01 28 W 11 47 W 30 66 W 49 85 W 68 109 A-5 95 29 W 12 48 W 31 67 W 50 86 W 69 110 A-3 97 31 W 14 50 W 33 69 W 52 88 W 71 112 A-2 98 32 W 15 51 W 34 70 W 53 89 W 72 113 A-1 99 33 W 16 52 W 35 71 W 54 90 W 73 114 14 34 W 17 53 W 36 72 W 55 91 W 74 115 15 35 W 18 54 W 37 73 W 56 92 W 75 116 16 36 W 19 55 W 38 74 W 57 93 W 76 117 17 W 1 37 W 20 56 W 39 75 W 58 94 W 77 118 18 W 2 38 W 21 57 W 40 76 W 59 100 W 78 119 19 W 3 39 W 22 58 W 41 77 W 60 101 W 79 120 20 21 W 4 W 5 40 41 W 23 W 24 59 60 W 42 W 43 78 79 W 61 W 62 102 103 W 80 W 81 121 122 22 23 W 6 W 7 42 43 W 25 W 26 61 62 W 44 W 45 80 81 W 63 W 64 104 105 W 82 W 83 123 124 24 W 8 44 W 27 63 W 46 82 W 65 106 W 84 125 25 W 9 45 W 28 64 W 47 83 W 66 107 26 27 W 10 46 W 29 65 W 48 84 W 67 108 Press VOLUME buttons on either the ) front panel to adjust volume to your Remote Control or( desired listening level. Pressing the button will increase sound volume, the button will decrease sound volume. The volume level is indicated on the screen by reference number (0-100)and by bar scale as shown. : ADJ. ENGLISH : EXIT 25 ADJ. NOTE TO CATV SYSTEM INSTALLER 1. Press POWER button to turn the TV on. 2. Press MENU button and move the cursor to "SET UP" option and press VOLUME + button, then the "SET UP" menu is displayed. SET UP :SEL ANTENNA CATV 2 AUTO PROGRAM FINE TUNE : MOVE : EXIT :SEL : PREV. 3. Press VOLUME+ button to Select ANTENNA option.(TV or CATV) 4. Press CH / buttons to place cursor on the "AUTO PROGRAM " option and press VOL + button. SET UP ANTENNA CATV 2 AUTO PROGRAM FINE TUNE AUTO PROGRAMMING : MOVE This reminder is provided to call the CATV system installer’s attention to article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. FRANÇAIS Basic Operation : MOVE VOLUME PORTUGUÊS 5) Press the TV MENU button to exit. PICTURE SOUND TIME SETUP FUNCTION LANGUAGE ENGLISH The volume level can be muted instantly by pressing MUTE button on the Remote Control. See "MUTE Button" on page 37. Your TV set can receive the normal TV channel(2-13) including the CABLE TV channel 15 ESPAÑOL MENU Regular cable channel designations. Your TV set's corresponding on-screen CABLE channel numbers. NOTES PICTURE SOUND TIME SETUP FUNCTION LANGUAGE ENGLISH : MOVE A-4 96 30 W 13 49 W 32 68 W 51 87 W 70 111 1) Press the MENU button. button to reach 2) Press the CHANNEL UP/DOWN LANGUAGE mode in function. 3) Press the VOLUME + button to select the desired language. 4) It will appear on the screen like below; MENU :SEL : STOP : PREV. 5. When you have finished "AUTO PROGRAMMING", press MENU button repeatedly until the menu disappears. 6. Press CH / buttons to Select the channel you want. 7. Press VOL + or VOL - buttons to adjust volume to your desired listening level. 16 Basis of "MENU" Operation Method You can execute every operation by pressing CH / buttons and VOL +/- or buttons alternately. If you learn one method, You can easily operate another function by viewing picture. 1. Pressing these buttons alternately makes every operation easy. 2. MOVE Press CH / buttons to place cursor. 3. PICTURE CHANGE Press VOL +/- or buttons to change picture by inputting selected function. MENU PICTURE SOUND TIME SETUP FUNCTION LANGUAGE : MOVE : MOVE :SEL : MOVE ANTENNA CATV2 AUTO PROGRAM FINE TUNE : PREV. : ADJ. STANDARD 75 50 50 50 : PREV. MENU : MOVE :SEL ON ON OFF : ADJ. 17 ANTENNA CATV 2 AUTO PROGRAM FINE TUNE ENGLISH : SEL. : MOVE : EXIT : SEL. : PREV. SET UP SET UP ANTENNA CATV 2 AUTO PROGRAM FINE TUNE ANTENNA TV 2 AUTO PROGRAM FINE TUNE : PREV. : SEL. : PREV. : MOVE : SEL. : PREV. : PREV. 3. After you have finished selecting "ANTENNA" mode, press MENU button repeatedly until the menu disappears. SOUND BLUE BACK HALF TONE CCD SET UP PICTURE SOUND TIME SETUP FUNCTION LANGUAGE : MOVE : MOVE FUNCTION PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT 1. Press MENU button and move the cursor to "SET UP" option and press VOL + button then the "SET UP" menu is displayed. : EXIT AM12:00 OFF OFF AM12:00 AM12:00 PICTURE In this mode, you can change the broadcast mode between "TV" (for regular VHF/UHF channels) and " CATV " (for cable channels). 2. Press CH / buttons to place the cursor on the "ANTENNA" option and press VOL + button. You can select "TV"(on-air) or "CATV"(cable TV) broadcast mode. ENGLISH SET UP :SEL ANTENNA SELECTION : MOVE TIME CLOCK SLEEP TIMER ON TIME OFF TIME ON CHANNEL Channel Memory (Set Up) SOUND EQUALIZER BALANCE SURROUND AVL : MOVE : ADJ. STANDARD OFF OFF : PREV. 18 Channel Memory (Set Up) Channel Memory (Set up) AUTO PROGRAM MANUAL MEMORY(channel add/delete) This function allows the channels to be memorized automatically to match the TV broadcasts and cable channels in your area. 1. Press MENU button and move the cursor to "SET UP" option and press VOL + button, then the "SET UP" menu is displayed. MENU SET UP PICTURE SOUND TIME SETUP FUNCTION LANGUAGE : MOVE 2. Press CH button. ANTENNA CATV 2 AUTO PROGRAM FINE TUNE Press the 10-Digit Keypad button to select a channel you want to view. Press "ADD/DEL" button on the Remote Control. The channel is added to memory and the color of the channel number changes from red to green. CH DELETING CH ADDING ENGLISH : SEL. : MOVE : EXIT : SEL. : PREV. CATV 12 CATV 12 channel added channel deleted COLOR : GREEN COLOR : RED buttons to place cursor on the "AUTO PROGRAM" option and press VOL + SET UP ANTENNA CATV 2 AUTO PROGRAM FINE TUNE AUTO PROGRAMMING : MOVE 1. TO ADD A CHANNEL If you want to add to the memory a channel the TV did not store during AUTO PROGRAM, follow these steps. : SEL. 2. TO DELETE CHANNEL You can exclude the channels of your choice from the memorized channel. Follow these steps to delete the channel in the TV's memory. + : STOP : PREV. When tuned to a channel in which TV program is broadcasted, this channel is memorized and the color changes from magenta to green. After every channels were memorized, "SET UP" menu is displayed. Press CH / buttons or Press the 10-Digit keypad button to select a channel you want to delete. Press "ADD/DEL" button on the Remote Control. The channel is removed from the memory, and the color of the channel number changes from green to red. 3. When you have finished "AUTO PROGRAMMING", press MENU button repeatedly until the menus disappear. NOTES If the broadcast signal is weak, the channel will not be memorized. In this case, perform the MANUAL MEMORY procedure.(Refer to the next page) If you wish to stop this procedure during the operation, Press VOL + button. 19 20 Channel Memory (Set up) Picture Adjustment FINE TUNE P.STD BUTTON If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during auto program and manual memory. If however the signal is weak or distorted, you may have to fine-tune the channel manually. By pressing the P.STD button on the Remote Control, you can sequentially select any one of the four possible preferred analogue picture and sound presets. Whenever this button is pressed, the mode will be changed as follows. 1. Press CH / buttons or Press the 10-Digit keypad button to adjust a channel you want. 2. Press MENU button and move the cursor to "SET UP" option and press VOL + or button, then the "SET UP" menu is displayed. MENU PICTURE SOUND TIME SETUP FUNCTION LANGUAGE : MOVE (1) STANDARD mode (2) DYNAMIC mode SET UP (3) MILD mode ANTENNA CATV 2 AUTO PROGRAM FINE TUNE (4) CUSTOM mode ENGLISH : SEL. : MOVE : EXIT : SEL. :PREV. 3. Press CH / buttons to place the cursor on the "FINE TUNE" option. 4. Use VOL +/- or buttons until you obtain a sharp and clear picture and good sound quality. SET UP SET UP ANTENNA CATV 2 AUTO PROGRAM FINE TUNE ANTENNA CATV 2 AUTO PROGRAM FINE TUNE +1 A/D:MEMORY : MOVE : ADJ. A/D:MEMORY : MOVE : ADJ. :PREV. STANDARD Select this mode to view the factory-presetting standard picture. DYNAMIC Select this mode to -To view a powerful and clear picture. -To watch in the brighter(daylight) environments. MILD Select this mode - To emphasize mildness - When it is dark around - To lessen the fatigue of eyes :PREV. CUSTOM 5. If you wish to memorize adjusted FINE TUNE state, press "ADD/DEL" button, and then the memorie icon is displayed. If you wish to initialize it, press that button again, and then the icon disappear. NOTES PICTURE MODE Select this mode to view the adjusted picture you want. The memorized channel does not operate AFT(automatic frequency tuning)mode. The FINE-TUNE is operated only selected channel. After the "AUTO PROGRAM", the memorized channel operate AFT(automatic frequency tuning)mode automatically. 21 22 Picture Adjustment USING ON-SCREEN MENU You can sequentially select any one of the four possible preferred analogue picture presets. MENU You can sequentially select and adjust one of five picture levels. Contrast, Brightness, Color, Sharpness or Tint e.g. : Contrast Adjustment. PICTURE SOUND TIME SETUP FUNCTION LANGUAGE ENGLISH : MOVE Picture Adjustment :SEL Press the MENU button. Move the cursor to PICTURE by pressing the CH / buttons and press the VOL + button. : EXIT PICTURE SOUND TIME SETUP FUNCTION LANGUAGE ENGLISH : MOVE PICTURE PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT : MOVE MENU : ADJ. STANDARD 75 50 50 50 Move the cursor to PICTURE by pressing the CH / buttons. :SEL : MOVE : EXIT PICTURE PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT : PREV. Press the MENU button. Move the cursor to PICTURE by pressing the CH buttons and press the VOL + button. STANDARD 75 50 50 50 : ADJ. CONTRAST : ADJ. : PREV. 75 Adjust " CONTRAST " by VOL +/buttons. : PREV. 23 Move the cursor to CONTRAST by pressing the CH / buttons and press the VOL +/- buttons. When you have finished contrast adjustment, press MENU repeatedly until the menu disappears. 24 Sound Adjustment Sound Adjustment USING ON-SCREEN MENU S.STD There is a choice of five audio settings. By pressing the S.STD button, any one of five settings can be in the sequence illustrated. Whenever this button is pressed, the mode will be changed as follows. There is a choice of five audio settings by using the on-screen menu, the five settings can by viewed in the sequence illustrated. 1. Press S.STD button. Whenever this button is pressed, the mode will be changed as follows. STANDARD MUSIC MOVIE SPEECH CUSTOM MENU PICTURE SOUND TIME SETUP FUNCTION : MOVE STANDARD Select this mode to hear the factory presetting standard sound MUSIC Select this mode to hear the music MOVIE Select this mode to view the movie Select this mode to hear the voice clearly CUSTOM Select this mode to hear the adjusted sound you want 25 :SEL : EXIT SOUND EQUALIZER BALANCE SURROUND : MOVE SPEECH Press the MENU button. Move the cursor to SOUND by pressing the CH buttons and press the VOL + button. : ADJ. Move the cursor to SOUND by pressing the CH / buttons. OFF : PREV. 26 Sound Adjustment Sound Adjustment EQUALIZER BALANCE You can adjust five frequency ranges to your preference. SOUND MENU MENU PICTURE SOUND TIME SETUP FUNCTION : MOVE Press the MENU button. Move the cursor to SOUND by pressing the CH / buttons and press the VOL + button. : SEL : EXIT MENU PICTURE SOUND TIME SETUP FUNCTION LANGUAGE : MOVE SOUND Move the cursor to EQUALIZER by pressing the CH / buttons and press the VOL + button. 27 : SEL SOUND EQUALIZER BALANCE SURROUND AVL Adjust each frequency band, using CH / buttons. ENGLISH : EXIT SOUND : MOVE Press the TV MENU button. Move the cursor to SOUND by pressing the CH / buttons and press the VOL + button. STANDARD OFF OFF : ADJ. BALANCE : ADJ. Move the cursor to BALANCE by pressing the CH / buttons. : PREV. Press the VOL +/- buttons. The Sound BALANCE is adjusted. : PREV. 28
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 14 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:8a6402ab-2edc-4f18-92bf-8c682c5bebb5 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2004:08:27 11:14:18+09:00 Create Date : 2004:08:27 10:44:06Z Metadata Date : 2004:08:27 11:14:18+09:00 Document ID : uuid:5cae83b1-b66f-4140-9e98-1ab04632359b Format : application/pdfEXIF Metadata provided by EXIF.tools