Kenwood USA 460300 Licensed Non-Broadcast Transmitter Held to Face User Manual Operating Instructions
Kenwood USA Corporation Licensed Non-Broadcast Transmitter Held to Face Operating Instructions
Contents
- 1. Instruction Manual
- 2. Operating Instructions
- 3. RF Exposure Information
Operating Instructions
 and [Super Lock](hold).AntennaMicrophoneSpeaker](https://usermanual.wiki/Kenwood-USA/460300.Operating-Instructions/User-Guide-2080998-Page-1.png)
![• For function descriptions and details on how to change the function of the Function key-1, refer to “KEY ASSIGNMENT MODE”. PTT (Push to Talk) switch Press and hold, then speak into the microphone to transmit. Power switch Hold for 1 second to turn the transceiver power ON. Hold for 2 seconds to turn the transceiver power OFF. Momentarily press this key while the transceiver power is ON to activate the Battery Level Guide. Refer to the Battery Level Guide table. Up/Down key Press these keys to adjust the volume, change the channel,• To change the operating frequency or QT/DQT settings of a channel, refer to “CHANNEL SETUP MODE”. Function key-2 Press this key to change the function of the Up/Down keys as follows: Volume Adjustment mode → Channel Select mode. Hold this key for 1 second to activate its programmable function. The default setting is [Monitor].• For function descriptions and details on how to change the function of the Function key-2, refer to “KEY ASSIGNMENT MODE”. LED indicator Refer to the LED Indicator Status table. Strap hole Connect a commercially available strap here.](https://usermanual.wiki/Kenwood-USA/460300.Operating-Instructions/User-Guide-2080998-Page-2.png)