Kenwood Kdc 128Cr Owner S Manual 1028_128_128CR
Kenwood-Kdc-1028-Owner-S-Manual kenwood-kdc-1028-owner-s-manual
Kenwood-Kdc-128-Owner-S-Manual kenwood-kdc-128-owner-s-manual
128 to the manual bf9d22e5-3ea1-4973-a992-dae6783a81d6
2014-07-06
: Kenwood Kenwood-Kdc-128Cr-Owner-S-Manual kenwood-kdc-128cr-owner-s-manual kenwood pdf
Open the PDF directly: View PDF 
.
Page Count: 72
KDC-1028
KDC-128
KDC-128CR
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you
obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer to the
model and serial numbers whenever you call upon your KENWOOD dealer for
information or service on the product.
Model KDC-1028/128/128CR Serial number
© B64-2927-00/00 (KW/KN)
B64-2927-00_K_English_r1.Indd 1
04.9.29 3:10:17 PM
B64-2927-00_K_English_r1.Indd 2
04.10.4 11:02:50 AM
Contents
2Warning
4
Accessories/ Installation Procedure18
Safety precautions
5
Connecting Wires to Terminals
19
Notes
6
Installation
20
About CDs
7
Removing the Unit
22
General features
8
Troubleshooting Guide
23
Specifications
25
Power
Selecting the Source
Volume
Attenuator
System Q
Audio Control
Audio Setup
Speaker Setting
Clock Display
Adjusting Clock
Dimmer Control
DSI (Disabled System Indicator)
Theft Deterrent Faceplate
TEL Mute
Tuner features
12
Tuning
Tuning Mode
Station Preset Memory
Auto Memory Entry
Preset Tuning
CRSC (Clean Reception System Circuit)
CD player features
14
Playing CD
Fast Forwarding and Reversing
Track Search
Track Repeat
Scan Play
Random Play
Basic Operations of remote
16
Loading and Replacing the battery
Basic operations
Audio Control
In Tuner source
In Disc source
English |
B64-2927-00_K_English_r1.Indd 3
3
04.9.29 2:39:42 PM
2Warning
2CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
KENWOOD CORPORATION
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
Location : Bottom Panel
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly approved
in the instruction manual. The user could lose
the authority to operate this equipment if an
unauthorized change or modification is made.
4 |
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment may cause harmful
interference to radio communications, if it is
not installed and used in accordance with the
instructions. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
English
B64-2927-00_K_English_r1.Indd 4
04.9.29 2:39:42 PM
Safety precautions
2WARNING
To prevent injury or fire, take the
following precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools)
inside the unit.
2CAUTION
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called lens
fogging, CDs may be impossible to play. In such
a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does
not operate normally after a while, consult your
Kenwood dealer.
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not set the removed faceplate or the faceplate
case in areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
• To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
• Do not subject the faceplate to excessive shock,
as it is a piece of precision equipment.
• When replacing a fuse, only use a new one with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
Attach the panel while you are on the
vehicle
The panel lock arm will be appeared when the
panel is removed. Therefore, the panel must be
attached during the driving.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the
unit, the adapter might separate from the CD and
damage the unit.
NOTE
This Class B digital apparatus complies with
Canadian ICES-003.
English |
B64-2927-00_K_English_r1.Indd 5
5
04.9.29 2:39:43 PM
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
CRSC
Reset button
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe neutral detergent off.
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a dry, soft cloth.
6 |
English
B64-2927-00_K_English_r1.Indd 6
04.9.29 2:39:43 PM
About CDs
Handling CDs
Removing CDs
• Don’t touch the recording surface of the CD.
When removing CDs from this unit pull them out
horizontally.
CDs that can’t be used
• CDs that aren’t round can’t be used.
• CD-R and CD-RW are easier to damage than a
normal music CD. Use a CD-R or a CD-RW after
reading the caution items on the package etc.
• Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
When using a new CD
If the CD center hole or outside rim has burrs, use it
after removing them with a ball pen etc.
Burrs
• CDs with coloring on the recording surface or that
are dirty can’t be used.
• This unit can only play the CDs with
.
It may not correctly play discs which do not have
the mark.
• A CD-R or CD-RW that hasn’t been finalized can’t
be played. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.)
Burrs
CD storage
• Don’t place them in direct sunlight (On the seat
or dashboard etc.) and where the temperature is
high.
• Store CDs in their cases.
CD accessories
Don’t use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
English |
B64-2927-00_K_English_r1.Indd 7
7
04.9.29 2:39:43 PM
General features
Release button
Control knob
VOL
CRSC
ATT
Q
SRC
CLK
ATT indicator
LOUD indicator
Power
Volume
Turning ON the Power
Press the [SRC] button.
Increasing Volume
Turn the [VOL] knob clockwise.
Turning OFF the Power
Press the [SRC] button for at least 1 second.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Selecting the Source
Attenuator
Turning the volume down quickly.
Press the [SRC] button.
Source required
Tuner
CD
Standby (Illumination only mode)
8 |
Display
"TUnE"
"CD"
"STBY"
Press the [ATT] button.
Each time the button is pressed, the Attenuator
turns ON and OFF.
When it’s ON, the "ATT" indicator blinks.
English
B64-2927-00_K_English_r1.Indd 8
04.9.29 2:39:43 PM
System Q
5 Exit Audio Control mode
You can recall the best sound setting preset for
different types of music.
Press any button.
Press the button which is not [VOL] knob and
[ATT] button.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
Each time the button is pressed, the sound
setting switches.
Sound setting
Natural
Rock
Pops
Easy
Top 40
Jazz
Display
"FLAT"
"ROCK"
"POPS"
"EASY"
"TP40"
"JAzz"
• "USER": The values set on the
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : Yes
Encryption : Standard V1.2 (40-bit)
User Access : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res
Modify Date : 2004:10:21 15:43:17+09:00
Create Date : 2004:09:29 14:39:56+09:00
Subject : Instruction Manual
Keywords : B64-2927-00_English, French, Spanish
Page Count : 72
About : uuid:9ed191e6-15a9-11d9-9e9d-000a957538c8
Producer : Acrobat Distiller 6.0.1 for Macintosh
Creation Date : 2004:09:29 14:39:56+09:00
Mod Date : 2004:10:21 15:43:17+09:00
Author : KENWOOD
Creator Tool : InDesign: pictwpstops filter 1.0
Metadata Date : 2004:10:21 15:43:17+09:00
Document ID : uuid:051d1e6f-11da-11d9-9f13-000a957538c8
Format : application/pdf
Creator : KENWOOD
Title : KDC-1028_128_128CR
Description : Instruction Manual
Page Mode : UseOutlines
Page Layout : OneColumn
EXIF Metadata provided by EXIF.tools