Kenxen Electronic IP01 IP-CAM User Manual ip01

Kenxen Electronic (SZ) Limited. IP-CAM ip01

User Manual

Cloud CameraUser Manual 1. IntroductionIP01 Cloud Camera is designed for middle, small enterprise & normal family use and it can monitor your environment in 24 hours every day. night time. It supports Wireless connection and it is convenient to setup & operate.• 802.11n Wireless Standard;• Motion & sound detection;• Wireless connection and no need for network wire connection;• High quality level 720P CMOS sensor;• Send snapshot or video to cloud server;environment.Dimensions 124 X 80 X 35mmWeight 208 gAudio Linear input/output two-way voice intercomAudio compression PCM or ADPCMVideo compression H.264Working frequency 50Hz / 60HzVideo Format 720p / 512kbps , WVGA / 256kbps, WQVGA / 128kbps Exposure balance AutomaticWhite balance AutomaticInfrared mode AutomaticNight vision 8 infrared lights, infrared irradiation distance: 3-4metersSupported protocol TCP/IPWireless standard WIFI(IEEE802.11b/g/n) Support IP addressesDynamic IP are supportedOperating temperature0° ~ 40°COperating humidity 10% ~ 85% (non-condensing)Storage temperature-10°C ~ 60°Storage humidity 10% ~ 85%(non-condensing)Operation system Microsoft Windows 2000/XP, Vista, Windows7, Windows8,Mac OS, LinuxAlarm detection Motion detection support Noise Detection3. Introduction on appearanceFront BackUSB portMicrophoneWi-Fi indicatorIR lightCameraIR SensorSpeakerReset4. Ways to assemble wall mountRightBaseWall mount Wrong5. Before setupa) Connect your mobile to your Wi-Fi routerb) Connect the USB cable to the IP camera and the USB power adaptor, plug in the power adaptor into the power socketc) Wait for around 30 second for device startup, there is a flash green light at the right on the IP cameraOutput: 5V 1AInput: 5V 1A6. Start up and registera) Click the “DirectGear” on the screenb) You will see the “DIRECTGEAR” logo shownc) The first time you start, the Sign up screen will showd) Type in an e-mail address and password into the relate field. Retype the password for double confirme) Click the “Sign up” button to registerf) You will received an e-mail for the registration, click the link on the e-mail to confirma) The first time login, it prompt for e-mail address and passwordb) Click “Log in” after finish type ina) If forgot the password, select the lower right corner “Forgot password” at the “Log in” b) Type in the e-mail addressc) Click “Send” and system will send an e-mail to your mailbox to reset your passworda) After login, the first screen will show which said “Your account is lonely. It needs a camera. Add on by tapping below.” b) Click the “Add camera”c) The add camera welcome screen will showd) You need your mobile connect to the same Wi-Fi network. Then click “OK”e) Follow the instruction on the screen, then click “Next”f ) Press the “Reset” button at the back of the IP camera for at least two seconds until you hear a “beep” sound. Then click “Next” on the screeni) It will scan the QR code on the mobile screen. Usually take 2~5 seconds. After you hear the “beep beep” sound, you can click the “Yes, I heard it” button.j) It will automatic configure the IP camera, it need takes around 20 to 30 seconds.k) After finished, it will show two fields which you can change the device name and time zone. Click “Let’s go” after finish modify. Now the camera is ready.g) It will prompt to select the Wi-Fi network and input the password. Press “Next” when finished.h) Read the instruction on the screen. It asks you hold the mobile in front of the camera between 10cm~20cm after click the “OK”. DIRECTGEAR7. The login8. Forgot password9. Add camera
11. Camera settings (IP camera needs to connected state)a) Preferences of the camera i. Camera name: users can change the name or choose a default name ii. Location: choose the Greenwich mean timeb) Camera i. Camera: enable or disable the camera ii. Camera off at: Scheduling the camera on/off timec) Cloud recording (need enable the cloud service) i. Recording: enable or disable the cloud recording ii. Recording off at: Scheduling the recording on/off timed) Services i. Closeli plan: Your cloud service plan status. If expired, you can select the plan here and it will forward to the online billing websitee) General settings i. Notification settings ● Motion detection: Enable/disable motion detection ● Motion area settings: Drag to set an area in the grid to detect motionTo exit the app, click the mobile “Back” button and it will ask you “Are you sure you want to exit?” Select “Exit” to quit.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.For MPE (Fixed or Mobile Device)“FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.”10. My Cameras (main screen)12. Accounta) After add the camera, the main screen will appear a camera screen.b) If you can’t find it, you can slide the screen down to refresh the cameras in your account. And you can also change the display preview window format.c) Press the upper left corner the “Left arrow” button, a sub menu appears. i. My Cameras: the main screen for select the cameras which register in this account ii. Account: change e-mail address, password enable/disable newsletters and log out iii. About: Information of current version, legal notice and license agreementd) Click the camera picture to view the camera streaming as below.i. Screen capture: It will store at the “DirectGear” folder in your mobileii. Microphone on/off: After enable it, an orange microphone icon will appear. Click it and speak on the mobile, the IP camera speaker will have your voice.iii. Playback (cloud service only): You can slide the “Playback” time to the left and it will playback the previous video from the cloud service. For more easy to choose the time for playback the video, you can click the left hand side “zoom” to enlarge time bar. To view real time video, click the “right arrow” button on the time bar.iv. Events (cloud service only): Click on it and you can choose the previous recorded video for playback. It will separate as motion and sound events.v. Favorites (cloud service only): ● Choose and playback the saved video from the cloud service ● Select a start time at time and events area ● Click the cut icon. ● The save to favorites screen will show ● Sound detection: Enable/disable sound detection ● Stop Notifications: Add schedule for alerts off ● Email notifications: Send notifications to email addressii. Detection sensitivity ● Sound sensitivity: you can select Bam, Default and Whisper ● Motion sensitivity: you can select Crash, Default and Tiptoea) Change email address: You can change the login e-mail address to a new oneb) Change password: You can change your passwordc) Log out: log out this account and back to the log in screen 13. Reset the IP cameraa) If your IP camera change to another Wi-Fi network, you should reset the IP camerab) To reset it, use a pencil or pen to press the “Reset button” at the lower left corner at the back of the IP camera. Press until a “beep” sound (around 2 seconds). The flash green light will blank. Wait until it flash again and repeat the “Add camera” steps. iii. Video quality: User can choose High, Medium and Low video quality iv. Camera microphone: ● Camera microphone: Enable/disable sound to be detected and recorded ● Turn camera microphone off at: Scheduling the microphone on/off timef ) Hardware i. Rotate image 180o: Enable to upside down the video screeng) Details i. Wi-Fi network: You can change connect to another Wi-Fi network ii. Camera details: Device name, Time zone, Firmware, Device ID and Mac addressh) Remove Camera This will remove the camera from your account. Warning: (All associated recordings will be deleted and non-reversible). If you want add this camera to another account, you must remove the camera.Camera nameDate and timeSound on/offTimeEventsDayMicrophone on/off Camera settings Full screen display Playback timePlanFavoritesScreen captureTime and events area ● You can change the title name and duration. ● Click upper right corner “Save” to complete ● It will appear at the Favorites folder, to playback, just click it. ● To download the video to your mobile, click “Save” in the playback screen of the videovi. Plan (cloud service only): Your account existing cloud service plan14. Exit15. Package ContentsResetIP Cloud Camera USB cable A/C adaptorWall mount User manual Quick install guideThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu