Kenxen Electronic IP01 IP-CAM User Manual ip01
Kenxen Electronic (SZ) Limited. IP-CAM ip01
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2589441 |
| Application ID | pwasjT+6L1Jzhwf7udfd0A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 163.33kB (2041600 bits) |
| Date Submitted | 2015-04-19 00:00:00 |
| Date Available | 2015-06-03 00:00:00 |
| Creation Date | 2015-03-27 08:36:30 |
| Producing Software | Adobe PDF library 11.00 |
| Document Lastmod | 2015-03-27 09:30:55 |
| Document Title | ip01--说明书 |
| Document Creator | Adobe Illustrator CC 2014 (Windows) |
Cloud Camera User Manual 1. Introduction Wireless standard WIFI(IEEE802.11b/g/n) IP01 Cloud Camera is designed for middle, small enterprise & normal family use and it can monitor your environment in 24 hours every day. Support IP addresses Dynamic IP are supported Operating temperature 0° ~ 40°C Operating humidity 10% ~ 85% (non-condensing) Storage temperature -10°C ~ 60° Storage humidity 10% ~ 85%(non-condensing) Base Operation system Microsoft Windows 2000/XP, Vista, Windows7, Windows8,Mac OS, Linux Wall mount Alarm detection Motion detection support Noise Detection night time. It supports Wireless connection and it is convenient to setup & operate. • 802.11n Wireless Standard; • Motion & sound detection; • Wireless connection and no need for network wire connection; • High quality level 720P CMOS sensor; • Send snapshot or video to cloud server; environment. Dimensions 124 X 80 X 35mm Weight 208 g Audio Linear input/output two-way voice intercom Audio compression PCM or ADPCM H.264 Working frequency 50Hz / 60Hz Video Format 720p / 512kbps , WVGA / 256kbps, WQVGA / 128kbps Exposure balance Automatic IR light White balance Automatic Wi-Fi indicator Infrared mode Automatic 8 infrared lights, infrared irradiation distance: 3-4meters Supported protocol TCP/IP Right Front Camera Back Speaker IR Sensor Reset Microphone USB port Wrong 5. Before setup 3. Introduction on appearance Video compression Night vision 4. Ways to assemble wall mount a) Connect your mobile to your Wi-Fi router b) Connect the USB cable to the IP camera and the USB power adaptor, plug in the power adaptor into the power socket c) Wait for around 30 second for device startup, there is a flash green light at the right on the IP camera Input: 5V 1A Output: 5V 1A 6. Start up and register a) Click the “DirectGear” on the screen b) You will see the “DIRECTGEAR” logo shown c) The first time you start, the Sign up screen will show 8. Forgot password a) If forgot the password, select the lower right corner “Forgot password” at the “Log in” DIRECTGEAR d) Type in an e-mail address and password into the relate field. Retype the password for double confirm e) Click the “Sign up” button to register f) You will received an e-mail for the registration, click the link on the e-mail to confirm 7. The login a) The first time login, it prompt for e-mail address and password b) Click “Log in” after finish type in d) You need your mobile connect to the same Wi-Fi network. Then click “OK” e) Follow the instruction on the screen, then click “Next” f ) Press the “Reset” button at the back of the IP camera for at least two seconds until you hear a “beep” sound. Then click “Next” on the screen i) It will scan the QR code on the mobile screen. Usually take 2~5 seconds. After you hear the “beep beep” sound, you can click the “Yes, I heard it” button. j) It will automatic configure the IP camera, it need takes around 20 to 30 seconds. g) It will prompt to select the Wi-Fi network and input the password. Press “Next” when finished. h) Read the instruction on the screen. It asks you hold the mobile in front of the camera between 10cm~20cm after click the “OK”. k) After finished, it will show two fields which you can change the device name and time zone. Click “Let’s go” after finish modify. Now the camera is ready. b) Type in the e-mail address c) Click “Send” and system will send an e-mail to your mailbox to reset your password 9. Add camera a) After login, the first screen will show which said “Your account is lonely. It needs a camera. Add on by tapping below.” b) Click the “Add camera” c) The add camera welcome screen will show 10. My Cameras (main screen) a) After add the camera, the main screen will appear a camera screen. b) If you can’t find it, you can slide the screen down to refresh the cameras in your account. And you can also change the display preview window format. c) Press the upper left corner the “Left arrow” button, a sub menu appears. i. My Cameras: the main screen for select the cameras which register in this account ii. Account: change e-mail address, password enable/disable newsletters and log out iii. About: Information of current version, legal notice and license agreement d) Click the camera picture to view the camera streaming as below. Camera name Camera settings Date and time Screen capture i. Screen capture: It will store at the “DirectGear” folder in your mobile ii. Microphone on/off: After enable it, an orange microphone icon will appear. Click it and speak on the mobile, the IP camera speaker will have your voice. iii. Playback (cloud service only): You can slide the “Playback” time to the left and it will playback the previous video from the cloud service. For more easy to choose the time for playback the video, you can click the left hand side “zoom” to enlarge time bar. To view real time video, click the “right arrow” button on the time bar. iv. Events (cloud service only): Click on it and you can choose the previous recorded video for playback. It will separate as motion and sound events. Full screen display Sound on/off Microphone on/off Time and events area Playback time ● You can change the title name and duration. ● Click upper right corner “Save” to complete ● It will appear at the Favorites folder, to playback, just click it. ● To download the video to your mobile, click “Save” in the playback screen of the video vi. Plan (cloud service only): Your account existing cloud service plan 11. Camera settings (IP camera needs to connected state) a) Preferences of the camera i. Camera name: users can change the name or choose a default name ii. Location: choose the Greenwich mean time b) Camera i. Camera: enable or disable the camera ii. Camera off at: Scheduling the camera on/off time c) Cloud recording (need enable the cloud service) i. Recording: enable or disable the cloud recording ii. Recording off at: Scheduling the recording on/off time d) Services i. Closeli plan: Your cloud service plan status. If expired, you can select the plan here and it will forward to the online billing website e) General settings i. Notification settings ● Motion detection: Enable/disable motion detection ● Motion area settings: Drag to set an area in the grid to detect motion ● Sound detection: Enable/disable sound detection ● Stop Notifications: Add schedule for alerts off ● Email notifications: Send notifications to email address Time Favorites Day Plan Events v. Favorites (cloud service only): ● Choose and playback the saved video from the cloud service ● Select a start time at time and events area ● Click the cut icon. ● The save to favorites screen will show ii. Detection sensitivity ● Sound sensitivity: you can select Bam, Default and Whisper ● Motion sensitivity: you can select Crash, Default and Tiptoe iii. Video quality: User can choose High, Medium and Low video quality iv. Camera microphone: ● Camera microphone: Enable/disable sound to be detected and recorded ● Turn camera microphone off at: Scheduling the microphone on/off time f ) Hardware i. Rotate image 180o: Enable to upside down the video screen g) Details i. Wi-Fi network: You can change connect to another Wi-Fi network ii. Camera details: Device name, Time zone, Firmware, Device ID and Mac address h) Remove Camera This will remove the camera from your account. Warning: (All associated recordings will be deleted and non-reversible). If you want add this camera to another account, you must remove the camera. 14. Exit To exit the app, click the mobile “Back” button and it will ask you “Are you sure you want to exit?” Select “Exit” to quit. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 13. Reset the IP camera a) If your IP camera change to another Wi-Fi network, you should reset the IP camera b) To reset it, use a pencil or pen to press the “Reset button” at the lower left corner at the back of the IP camera. Press until a “beep” sound (around 2 seconds). The flash green light will blank. Wait until it flash again and repeat the “Add camera” steps. 15. Package Contents However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: IP Cloud Camera USB cable A/C adaptor Wall mount User manual Quick install guide 12. Account a) Change email address: You can change the login e-mail address to a new one b) Change password: You can change your password c) Log out: log out this account and back to the log in screen Reset Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For MPE (Fixed or Mobile Device) “FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : ip01--说明书 Metadata Date : 2015:03:27 09:30:55+08:00 Modify Date : 2015:03:27 09:30:55+08:00 Create Date : 2015:03:27 08:36:30+09:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 256 Thumbnail Height : 84 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11503 bytes, use -b option to extract) Instance ID : uuid:f16a6aec-8bc6-4cb1-9a1c-212cee24d612 Document ID : xmp.did:27b6463d-23d6-4c46-9c67-00375afe8ea3 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:ff3fc73e-ae5c-c44f-98d5-f8adcb6f34fb Derived From Document ID : xmp.did:ff3fc73e-ae5c-c44f-98d5-f8adcb6f34fb Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:ff3fc73e-ae5c-c44f-98d5-f8adcb6f34fb, xmp.iid:27b6463d-23d6-4c46-9c67-00375afe8ea3 History When : 2015:03:27 08:36:09+08:00, 2015:03:27 08:36:25+08:00 History Software Agent : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Users\yangyuan\Desktop\13.jpg, C:\Users\yangyuan\Desktop\12.jpg, E:\网站资料\居家生活图\場景2.jpg, E:\网站资料\居家生活图\場景2.jpg, E:\网站资料\居家生活图\場景2.jpg, E:\网站资料\居家生活图\場景2.jpg, C:\Users\yangyuan\Desktop\10.jpg, C:\Users\yangyuan\Desktop\11.jpg, C:\Users\yangyuan\Desktop\8.jpg, C:\Users\yangyuan\Desktop\9.jpg, C:\Users\yangyuan\Desktop\7.jpg, C:\Users\yangyuan\Desktop\5.jpg, C:\Users\yangyuan\Desktop\6.jpg, C:\Users\yangyuan\Desktop\4.jpg, C:\Users\yangyuan\Desktop\2.jpg, C:\Users\yangyuan\Desktop\3.jpg, C:\Users\yangyuan\Desktop\1.jpg Manifest Reference Document ID : xmp.did:423C1A84794FE411A7BED6B6904BEDFF, xmp.did:423C1A84794FE411A7BED6B6904BEDFF, xmp.did:423C1A84794FE411A7BED6B6904BEDFF, xmp.did:423C1A84794FE411A7BED6B6904BEDFF Manifest Reference Instance ID : xmp.iid:423C1A84794FE411A7BED6B6904BEDFF, xmp.iid:423C1A84794FE411A7BED6B6904BEDFF, xmp.iid:423C1A84794FE411A7BED6B6904BEDFF, xmp.iid:423C1A84794FE411A7BED6B6904BEDFF Ingredients File Path : C:\Users\yangyuan\Desktop\13.jpg, C:\Users\yangyuan\Desktop\12.jpg, E:\网站资料\居家生活图\場景2.jpg, E:\网站资料\居家生活图\場景2.jpg, E:\网站资料\居家生活图\場景2.jpg, E:\网站资料\居家生活图\場景2.jpg, C:\Users\yangyuan\Desktop\10.jpg, C:\Users\yangyuan\Desktop\11.jpg, C:\Users\yangyuan\Desktop\8.jpg, C:\Users\yangyuan\Desktop\9.jpg, C:\Users\yangyuan\Desktop\7.jpg, C:\Users\yangyuan\Desktop\5.jpg, C:\Users\yangyuan\Desktop\6.jpg, C:\Users\yangyuan\Desktop\4.jpg, C:\Users\yangyuan\Desktop\2.jpg, C:\Users\yangyuan\Desktop\3.jpg, C:\Users\yangyuan\Desktop\1.jpg Ingredients Document ID : xmp.did:423C1A84794FE411A7BED6B6904BEDFF, xmp.did:423C1A84794FE411A7BED6B6904BEDFF, xmp.did:423C1A84794FE411A7BED6B6904BEDFF, xmp.did:423C1A84794FE411A7BED6B6904BEDFF Ingredients Instance ID : xmp.iid:423C1A84794FE411A7BED6B6904BEDFF, xmp.iid:423C1A84794FE411A7BED6B6904BEDFF, xmp.iid:423C1A84794FE411A7BED6B6904BEDFF, xmp.iid:423C1A84794FE411A7BED6B6904BEDFF Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 295.352787 Max Page Size H : 210.352675 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, Arial-Black, Arial-BlackItalic, Calibri-Bold, AdobeSongStd-Light Font Family : Arial, Arial, Arial, Arial Black, Calibri, Adobe 宋体 Std Font Face : Regular, Bold, Black, Italic, Bold, L Font Type : Open Type, Open Type, Open Type, TrueType, Open Type, Open Type Font Version : Version 5.20, Version 5.20, Version 5.06, Version 1.00, Version 5.73, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False Font File Name : arial.ttf, arialbd.ttf, ariblk.ttf, Arial Black.TTF, CALIBRIB.TTF, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 11.00 Trapped : False GTS PDFX Version : PDF/X-3:2002 GTS PDFX Conformance : PDF/X-3:2002 Page Count : 2 Creator : Adobe Illustrator CC 2014 (Windows)EXIF Metadata provided by EXIF.tools