KingAnDa Technology Development HBQYZB Bluetooth Earphone User Manual 15 HBQ i8TWS UserMan

Shenzhen KingAnDa Technology Development Co., Ltd. Bluetooth Earphone 15 HBQ i8TWS UserMan

15_HBQ-i8TWS UserMan

First Part: TWS(True wireless stereo) EarphonesProduct description (TWS wireless Earphones)Mu lti-function ButtonMI CCharging Co ntacts Aluminum Mesh1、Power on/off3s5sPower on:Long press the multi-function button ab out 3 seconds and the led flashi ng in blue, it shows th e earphon e is power on. Long press the multi-f unction button about 5 seconds and the led flashing in red and blue alternately, that is the pairi ng status .4、Redial last phone call5、Bluetooth Earphone Pairing Steps(single mode) Dial the latest number by q uick press the power button 2 timesquick pressing the multi-function button 2 timesLong press about 5 seconds1 Turn on the Bluetooth 、on your dev ice2、 Long press the multi- function button about 5 seconds and the led flashing in red and blu e alterna tely, that is the pairin g status.3、Select “HBQ-i8 TWS” on your list, there wou ld be reminding voic e saying “connecte d”2 Charging for earphone and charging case ( LED light status)、Charging Status: LED light in ；redGet full power: LED light in and turn off after blueintelligent dete ction.3、Answering/hanging up/refusing the call : Answering/hang ing u p th e callsh ortly pressing the mu lti-function bu tton on e timeRefusing the call: quick pressin g the multi-functi on button 2 timesCharging method: Using the USB cable to attach the adapter and the charging case, then plug the adapter into the power connector(1) : LED light in ；Releasing power st atus blue(2) : LED light in ；Charging Status red；(3) : the Get full power red LED light is off Pl ay: shortly pressing the multi-function button one timePa use: shortly pressing th e multi-f unction button one time。12 3Power off:Long press the multi-function button ab out 5 seconds and the led flashi ng in red then off, it show s the earphone is powe r off.MiNi HBQ-i8TWSWIRELESS TWS MUSIC EARPHONE V4.2+EDRManualFCC ID:2AOZM-HBQYZB
6 Twins Pairing 、 1、Long pr ess the power button of the pa ir of e arphone s at the same ti me until the l ed flash in blue and red a ltern ately. The b oth of them ha ve a voice say"p ower on " and then "pa iring"Lo ng pr ess 5s 2、Doubl e press one of them w ill have a voice "sea rch for select" an d wait for one led of e arbud flash in blu e and red alternate ly will have a voice "pairing success ", that it is the pairing status. Double press o ne of the m 3 Please turn on the “Bluetooth” on your ce llphone and choose “HBQ-i8 TWS” o n your li st.The led 、 flash will be slowly in blue when connected.Second Part: Specifications The third part: packaging and accessoriesHeadset X2, Charging bunker X1, instruction X1, charging line X1, packing box X164True wireless stereo (TWS), real no wires design, individual left and right channel, HIFI sound, both the left and right earbud are Bluetooth enabled, could be used separately, or used as one pair. Bluetooth version: V4.2+EDR , ultra low consumptionBluetooth Mode: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3Bluetooth Frequency: 2.402~2480GHZBluetooth Range: 12 meters with no obstaclesBattery capacity: Earbud: built-in 60mah rechargeable Li-ion batteryCharging dock: 950mah (optional)Talk/Play time: Single earbud mode: 3-4 hoursOne Pair earbuds mode: 2-3 hoursStandby time: Single earbud mode: 120 hoursPair earbuds mode: 70 hoursCharging time: 1-2 hoursNet Weight Earbuds: 4g*2 Charging case: 51gGross weight 148gPacking box size 100*100*35mm1. Please do not overuse this earphone or put it under heavy pressure,keep away from wet and heat.2. Keep away from WIFI, router or other high frequency transmitting equipment to prevent interruption of signal receiving.3. Please use this earphone under its working range (10meters), and the effect would be better if there is no obstacle between the connected devices.4.Use this Bluetooth earphone to connect any device with Bluetooth functionWarnings:FCC statement:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu