KingAnDa Technology Development HBQYZB Bluetooth Earphone User Manual 15 HBQ i8TWS UserMan
Shenzhen KingAnDa Technology Development Co., Ltd. Bluetooth Earphone 15 HBQ i8TWS UserMan
15_HBQ-i8TWS UserMan
MiNi HBQ-i8TWS FCC ID:2AOZM-HBQYZB WIRELESS TWS MUSIC EARPHONE V4.2+EDR First Part: TWS(True wireless stereo) Earphones Product description (TWS wireless Earphones) Multi-function Button Aluminum Mesh MIC Manual Charging Contacts 1、Power on/off Power on: Long press the multi-function button about 3 seconds and the led flashing in blue, it shows the earphone is power on. Long press the multi-function button about 5 seconds and the led flashing in red and blue alternately, that is the pairing status. 3s Power off: Long press the multi-function button about 5 seconds and the led flashing in red then off, it shows the earphone is power off. 5s 2 、Charging for earphone and charging case ( LED light status) 4、Redial last phone call Charging Status: LED light in red; Get full power: LED light in blue and turn off after intelligent detection. Charging method: Using the USB cable to attach the adapter and the charging case, then plug the adapter into the power connector (1) Releasing power status : LED light in blue; (2) Charging Status : LED light in red ; (3) Get full power : the red LED light is off; Dial the latest number by quick press the power button 2 times 5、Bluetooth Earphone Pairing Steps(single mode) 3、Answering/hanging up/refusing the call Answering/hanging up the call : shortly pressing the multi-function button one time Refusing the call: quick pressing the multi-function button 2 times quick pressing the multi-function button 2 times Play: shortly pressing the multi-function button one time Pause: shortly pressing the multi-function button one time。 Long press about 5 seconds 1、Turn on the Bluetooth on your device 2、Long press the multi-function button about 5 seconds and the led flashing in red and blue alternately, that is the pairing status. 3、Select “HBQ-i8 TWS” on your list, there would be reminding voice saying “connected” Second Part: Specifications 6、Twins Pairing 1、Long press the power button of the pair of earphones at the same time until the led flash in blue and red alternately. The both of them have a voice say"power on" and then "pairing" The third part: packaging and accessories True wireless stereo (TWS), real no wires design, individual left and right channel, HIFI sound, both the left and right earbud are Bluetooth enabled, could be used separately, or used as one pair. Long press 5s 2、Double press one of them will have a voice "search for select" and wait for one led of earbud flash in blue and red alternately will have a voice "pairing success", that it is the pairing status. Double press one of them Bluetooth version: Bluetooth Mode: V4.2+EDR , ultra low consumption A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 Bluetooth Frequency: Bluetooth Range: 2.402~2480GHZ 12 meters with no obstacles Battery capacity: Earbud: built-in 60mah rechargeable Li-ion battery Charging dock: 950mah (optional) Talk/Play time: Charging time: Single earbud mode: 3-4 hours One Pair earbuds mode: 2-3 hours Single earbud mode: 120 hours Pair earbuds mode: 70 hours 1-2 hours Net Weight Gross weight Earbuds: 4g*2 148g Packing box size 100*100*35mm Standby time: 3、Please turn on the “Bluetooth” on your cellphone and choose “HBQ-i8 TWS” on your list.The led flash will be slowly in blue when connected. Charging case: 51g Headset X2, Charging bunker X1, instruction X1, charging line X1, packing box X1 Warnings: 1.Please do not overuse this earphone or put it under heavy pressure,keep away from wet and heat. 2.Keep away from WIFI, router or other high frequency transmitting equipment to prevent interruption of signal receiving. 3.Please use this earphone under its working range (10meters), and the effect would be better if there is no obstacle between the connected devices. 4.Use this Bluetooth earphone to connect any device with Bluetooth function FCC statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Format : application/pdf Creator : Administrator Title : mini hbq-i8é⁄“挰设计.cdr Create Date : 2018:01:29 16:28:07+08:00 Modify Date : 2018:02:03 11:52:50+08:00 Metadata Date : 2018:02:03 11:52:50+08:00 Producer : Microsoft: Print To PDF Document ID : uuid:8590f358-5e6a-4c27-9697-3e8558c82cd1 Instance ID : uuid:83a00b4a-a8a5-4983-949c-b076d883fb67 Warning : Pages object (2 0 obj) not found at 2329063 Author : AdministratorEXIF Metadata provided by EXIF.tools