KingAnDa Technology Development HBQYZB Bluetooth Earphone User Manual 15 HBQ i8TWS UserMan
Shenzhen KingAnDa Technology Development Co., Ltd. Bluetooth Earphone 15 HBQ i8TWS UserMan
15_HBQ-i8TWS UserMan
First Part: TWS(True wireless stereo) Earphones
Product description (TWS wireless Earphones)
Mu lti-function Button
MI C
Charging Co ntacts
Aluminum Mesh
1、Power on/off
3s
5s
Power on:
Long press the multi-function button ab out 3 seconds
and the led flashi ng in blue, it shows th e earphon e is
power on. Long press the multi-f unction button about
5 seconds and the led flashing in red and blue
alternately, that is the pairi ng status .
4、Redial last phone call
5、Bluetooth Earphone Pairing Steps(single mode)
Dial the latest number by q uick press the power button 2 times
quick pressing the multi-function button 2 times
Long press about 5 seconds
1 Turn on the Bluetooth 、
on your dev ice
2、 Long press the multi- function
button about 5 seconds and the led
flashing in red and blu e alterna tely,
that is the pairin g status.
3、Select “HBQ-i8 TWS”
on your list, there wou ld be
reminding voic e saying
“connecte d”
2 Charging for earphone and charging case ( LED light status)、
Charging Status: LED light in ；red
Get full power: LED light in and turn off after blue
intelligent dete ction.
3、Answering/hanging up/refusing the call
: Answering/hang ing u p th e call
sh ortly pressing the mu lti-function
bu tton on e time
Refusing the call: quick pressin g the
multi-functi on button 2 times
Charging method: Using the USB cable
to attach the adapter and the charging
case, then plug the adapter into the power
connector
(1) : LED light in ；Releasing power st atus blue
(2) : LED light in ；Charging Status red
；(3) : the Get full power red LED light is off
Pl ay: shortly pressing the
multi-function button
one time
Pa use: shortly pressing
th e multi-f unction button
one time。
1
2 3
Power off:
Long press the multi-function button ab out 5 seconds
and the led flashi ng in red then off, it show s the
earphone is powe r off.
MiNi HBQ-i8TWS
WIRELESS TWS MUSIC EARPHONE
V4.2+EDR
Manual
FCC ID:2AOZM-HBQYZB
6 Twins Pairing
、
1、Long pr ess the power button of the pa ir of e arphone s at the same ti me until the l ed flash in blue
and red a ltern ately. The b oth of them ha ve a voice say"p ower on " and then "pa iring"
Lo ng pr ess 5s
2、Doubl e press one of them w ill have a voice "sea rch for select" an d wait for one led of e arbud
flash in blu e and red alternate ly will have a voice "pairing success ", that it is the pairing status.
Double press o ne of the m
3 Please turn on the “Bluetooth” on your ce llphone and choose “HBQ-i8 TWS” o n your li st.The led
、
flash will be slowly in blue when connected.
Second Part: Specifications The third part: packaging and accessories
Headset X2, Charging bunker X1, instruction X1, charging line X1, packing box X1
64
True wireless stereo (TWS), real no wires design, individual left
and right channel, HIFI sound, both the left and right earbud are
Bluetooth enabled, could be used separately, or used as one
pair.
Bluetooth version: V4.2+EDR , ultra low consumption
Bluetooth Mode: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
Bluetooth Frequency: 2.402~2480GHZ
Bluetooth Range: 12 meters with no obstacles
Battery capacity: Earbud: built-in 60mah rechargeable Li-ion battery
Charging dock: 950mah (optional)
Talk/Play time: Single earbud mode: 3-4 hours
One Pair earbuds mode: 2-3 hours
Standby time: Single earbud mode: 120 hours
Pair earbuds mode: 70 hours
Charging time: 1-2 hours
Net Weight Earbuds: 4g*2 Charging case: 51g
Gross weight 148g
Packing box size 100*100*35mm
1. Please do not overuse this earphone or put it under heavy pressure,keep
away from wet and heat.
2. Keep away from WIFI, router or other high frequency transmitting
equipment to prevent interruption of signal receiving.
3. Please use this earphone under its working range (10meters), and the
effect would be better if there is no obstacle between the connected
devices.
4.Use this Bluetooth earphone to connect any device with Bluetooth
function
Warnings:
FCC statement:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.