Kingston Digital MLWG3 MobileLite WIRELESS G3 (MLWG3,MLWG3/64) User Manual
Kingston Digital Inc. MobileLite WIRELESS G3 (MLWG3,MLWG3/64)
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2860889 |
| Application ID | ZSCwdovb03fqX7JQmOfo3g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 24.03kB (300435 bits) |
| Date Submitted | 2015-12-30 00:00:00 |
| Date Available | 2016-06-27 00:00:00 |
| Creation Date | 2015-12-22 20:20:18 |
| Producing Software | pdfFactory Pro 3.25 (Windows XP Professional Chinese) |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | User Manual |
| Document Creator | pdfFactory Pro www.ahasoft.com.tw/FinePrint |
| Document Author: | Administrator |
User's Guide Removable Disk labeled “MLWG3” Double-click on the drive labeled “MLWG3” to add your content. Transfer your _les the same MLWG3 Getting Started as you would for any USB drive; drag or copy _les from your Step 1 – Charge your MLWG3 Device computer to your MLWG3 device. Before using, make sure your MLWG3™ is content fully charged. To by creating folders, e.g., “Videos, Music, charge, connect the included USB cable to Pictures your MLWG3’s and Documents”) mini USB port (1) and the other end into an available USB Step 3 – Download Kingston’s Free MLWG3 App from the port on your computer or to a USB wall App Store adapter. The green Visit Apple’s App Store and search for power light will stop _ashing when MLWG3 “Kingston MLWG3”. (It is recommended that you organize your is fully charged. Step 2 – Add Content to your MLWG3 Windows users: When connecting your MLWG3 to your — one Read-Only labeled “CDROM” and Figure 1 – Kingston’s MLWG3 App Icon Step 4 one Removable Power on the MLWG3 by pressing the Disk labeled “MLWG3” Double-click on the On/Off button drive labeled (2).* “MLWG3” to add your content. Transfer your *Note: After you power on, wait for Blue _les the same Wi-Fi Activity as you would for any USB drive; drag or Light to start _ashing before proceeding to copy _les from your the next computer to your MLWG3 device step(3). Mac users: By default when connecting your Step 5 MLWG3 to Go to the Settings icon on your iPad®, your computer, two drives will appear on iPhone®, or iPod® touch your desktop — and select Wi-Fi. Con_rm that Wi-Fi is ON. one Read-Only labeled “CDROM” and one Select “Kingston computer, two drive letters will appear in Windows Explorer MLWG3” under “Choose a Network” and H. Micro-B USB port - Allows you to charge click on it to MobileLite Wireless G3 or connect it to a connect to it. standard USB port on your Step 6 computer for fast, easy data transfer. Each Once connected, open the Kingston media expansion port will require its own MLWG3 app on your drive letter if media are iPad, iPhone, or iPod touch and enjoy your inserted. new expanded I. Ethernet port – Allows you to connect an storage. Ethernet cable to create a hotspot for Step 7 wireless internet access. Wi-Fi Share your content with as many as three mode will temporarily disable while users by having connected to Ethernet. them follow steps 3 to 6. A. USB 2.0 port - Allows you to connect an The battery LED also indicates how much battery time external USB Storage Device to MobileLite is left while the MobileLite Wireless G3 is powered on. Wireless G3. It also Green indicates 51% - 100% allows you to charge your mobile device. battery charge remaining; orange indicates 25% - 50% B. SD slot - Allows you to connect a battery charge remaining; and red indicates less than memory card (SD/SDHC/SDXC or any 25% battery charge remaining. microSD w/ adapter) to MobileLite Wireless G3. (Optional: no built-in capacity or ≦ 64GB) Product Content: C. Battery LED/Power* - Indicates current • 1 station MobileLite Wireless G3 battery status and current power state. Note: This product has a black and white D. Wi-Fi LED - Indicates current status of two kinds of housing Wi-Fi broadcast. E. Bridged LED - Indicates whether or not MobileLite Wireless G3 is bridged to an Internet gateway via Wi-Fi or Ethernet. F. Power button - Powers on or powers off • 1 strip the USB cable (45 cm, A turn Micro-B connector) the MobileLite Wireless G3 device. Short press (1 second): Power bank mode/Long press (3 seconds): Wi-Fi mode. G. Reset button - Allows you to reset the MobileLite Wireless G3 device to its original (default) configuration. Hold the button down for more than 10 seconds. • 1 inner bond MicroSD 64G card 3.Connect the equipment into and outlet on a FCC Compliance and circuit different from that to which the receiver Advisory Statement connected. This device complies with Part 15 of the FCC radio/TV technician for help. rules. Operation is subject to the following two Any special accessories needed for conditions:(1) this device may not cause compliance must be specified in the instruction harmful interference, and (2) this device must manual. accept Warning: A shielded-type power cord is any interference received, including required in order to meet FCC emission limits interference that may cause undesired and operation. also to prevent interference to the nearby radio This equipment has been tested and found to and television reception. It is essential that comply with the limits for a Class B digital only the supplied power cord be used. Use device, only shielded cables to connect I/O devices to according to Part 15 of the FCC rules. These this limits are designed to provide reasonable equipment. protection against harmful interference in a CAUSION: Any changes or modifications not residential installation. This equipment expressly approved by the party responsible generates, for uses and can radiate radio frequency energy compliance could void your authority to and if not installed and used in accordance operate the equipment. with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.Reorient the receiving antenna. 2.Increase the separation between the equipment and receiver. is 4.Consult the dealer or an experienced Required notices to the User of Canada (RSS) IC statement CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Complies with IDA Standards DAXXXXXX 四碼，為 MLW 的 MAC 位址末四碼), 無線連 接上後，點選 MAC 上方的 “Go -> Connect to 使用說明書 Server”, 輸入”smb://192.168.202.254” or “smb://192.168.203.254” 後，如果有出現彈出 輸入帳號密碼的視窗，帳號輸入”admin”, 密 碼請空白，再按輸入即可，進入之後會出現 USB, SD，或是 Internal 的資料夾，即可新增檔 有關完整的用戶手冊和常見問題列表，請線上訪問我們的 網站 http://www.kingston.com/us/landing/widriveplus/ 案。傳輸檔案的方式與使用一般 USB 隨身碟 相同；您只需將電腦中的檔案拖曳或複製即可 (建議您建立資料夾來組識您的檔案，例如「影 入門 片、音樂、圖片和檔」) 步驟 3-從 App Store(下載免費的 MobileLite 應用程式 無線存取裝置 您可連結至 Apple 的 App Store(並輸入「MobileLite」 型號：MLWG3 步驟 1-為您的 MLWG3 充電 在使用前，請先確認您的 MLWG3 已經充飽電 量。若需充電，請將附贈的 USB 線連接至 MLWG3 的 microUSB 埠(1)，另一端插入電腦 上可用的 USB 插槽或 USB 電源轉接器即可。 當 MLWG3 充飽電量後，綠色指示燈會停止閃 爍。 步驟 2-將資料傳輸至您的 MLWG3 Windows 作業系統的使用者：將您的計算器 連接上 MLW 的無線 SSID 後 (無線 SSID 後面 會帶四碼，為 MLW 的 MAC 位址末四碼)，無 線連接上後，Windows 檔案總管的網路磁片 下面會出現一個磁片代號-一個標示為 「MLW--」的卸除式磁片。在標示有「MLW」 開頭的磁片點擊兩下後，如果有出現彈出輸入 搜尋。 步驟 4 按下 On/Off 按鈕(2)以開啟 MLWG3 電源。 *請注意：當電源開啟後，請等候藍色的 Wi-Fi 指示燈開始閃爍，再繼續下一個操作步驟(3)。 步驟 5 在 iPad®、iPhone®或 iPod® touch 的「設定」 功能中點選 Wi-Fi 功能。確認開啟啟 Wi-Fi 功 能。在「選擇網路」下選取有「MLW」開頭 的無線 SSID 並開啟聯機。 步驟 6 聯機之後開啟 iPad®、iPhone®或 iPod® touch 上的 MLW 的應用程式，即可開始使用 MLWG3 的儲存空間。 步驟 7 遵循步驟 3 至 6 的程式，您即可透過 MLWG3 最多同時與三位元使用者分享檔案資料。 帳號密碼的視窗，帳號輸入”admin”, 密碼空 白按輸入即可，進入之後會出現 USB, SD，或 是 Internal 的資料夾，即可新增檔案。傳輸檔 案的方式與使用一般 USB 隨身碟相同；您只 A. USB 2.0 連接埠 - 可讓您將外接式 USB 需將電腦中的檔案拖曳或複製即可。 儲存裝置連接至 MobileLite Wireless G3。也 Mac 作業系統的使用者：將您的 Mac 連接上 能讓您為行動裝置充電。 MLW 的無線 SSID 後 （無線 SSID 後面都會帶 B. SD 插槽 - 可讓您將記憶卡 (SD/SDHC/SDXC 或任何搭配轉接卡的 microSD 記憶卡) 連接至 MobileLite Wireless G3。(選配：無內置容量 產品內容： 1 台 MobileLite Wireless G3 備註：本產品有黑色及白色兩種外殼 或 ≦64GB) C. 電池 LED 指示燈/電量* - 表示目前電池 和電量的狀態。 D. WiFi LED 指示燈 - 表示目前 WiFi 訊號 的狀態。 1 條 USB 傳輸線 (45 公分，A 轉 Micro-B E. 網路橋接 LED 指示燈 - 表示 接頭) MobileLite Wireless G3 是否已透過 Wi-Fi 或乙太網路橋接到網際網路。 F. 電源鍵 - 開啟或關閉 MobileLite Wireless G3 裝置的電源。短按 (1 秒)：備用 電池模式/長按 (3 秒)：Wi-Fi 模式。Wireless 1 個 內鍵 MicroSD 64G 卡 G3 充電，或是連接到電腦上的標準 USB 連 接埠，以便快速且 輕鬆地傳輸資料。當擴充連接埠在使用時，每 個使用中的連接埠都需要專屬的磁碟機代號。 G. 重置按鈕 - 可讓您將 MobileLite Wireless G3裝置恢復原廠設定 (出廠預設 注意事項： 值)。按住按鈕十秒以上。 依據低功率電波幅射性電機管理辨法 H. Micro-B USB 連接埠 - 可為 MobileLite 第十二條：經型式認證合格之低功率射頻電機，非經 I. 乙太網路連接埠 – 可以連接乙太網路纜 許可，公司、商號或使用者均 線，以建立無線網路熱點，聯機到網際網路。 不得得擅自變更頻率、加大功率或變更通原計之特性 當連接至乙太網路時，Wi-Fi模式將暫時停用。 及功能。 第十四條：低功率射頻電機之使用不得影響飛航安全 *電池 LED 指示燈在開啟 MobileLite Wireless G3 電 源時，會顯示目前電池電量剩餘時間。綠色表示剩下 51% - 100% 的電池電量；橘色表示剩 下 25% - 50% 電池電量；而紅色表示剩下或低於 25% 的電池電量。 及干擾合法通信；經發現有干 擾現象時，應立即停用，並改善至無干擾時方得繼續 使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通 信或工業、科學及醫療用電波輻射性電機設備之干擾。 減少電磁波影響，請妥適使用。 [警語] 「電磁波曝露量MPE 標準值1mW/cm2，送測產品實 測值為 (0.028) mW/cm2」
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Title : MMobileLite WIRELESS G3-MLWG3中英文使用手冊.doc Author : Administrator Creator : pdfFactory Pro www.ahasoft.com.tw/FinePrint Producer : pdfFactory Pro 3.25 (Windows XP Professional Chinese) Create Date : 2015:12:22 20:20:18+08:00 Page Count : 7EXIF Metadata provided by EXIF.tools