Kingwave Technology KW5405 5.8GHz Wireless CCD Color Camera User Manual KW5301070622 001

Download:
Mirror Download [FCC.gov]
Document ID	909578
Application ID	jSA/ZnSLDZRWKfRnTFsOZA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	141.55kB (1769367 bits)
Date Submitted	2008-03-04 00:00:00
Date Available	2008-03-04 00:00:00
Creation Date	0000-01-01 00:00:00
Producing Software	Corel PDF Engine Version 1.0.0.536
Document Lastmod	2007-09-17 11:44:04
Document Title	KW5301070622-001
Document Creator	CorelDRAW 版本 12.0

/5221F
5.8
4.
3.
4.
1. Channel Frequency
CH1 5740MHz
CH2 5780MHz
CH3 5820MHz
CH4 5860MHz
2.
5725~5875M
3.
4.
5.
6.
7.
8.
5725~5875M
12
12VDC 500mA
KW5800
±0.5
5.8
5.8
12VDO (500mA)
Notice : The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,
no change to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements and void
user’s authority to operate the device.
3.
KW5221/KW5522
5.8
5.8
IR Sensor
12
8.
Channel Frequency
CH1 5740MHz
CH2 5780MHz
CH3 5820MHz
Ch4 5860MHz
3.Selectable Channels:
CH 1
CH 3
CH 5
CH 7
DIP 1
ON
ON
ON
ON
DIP 2
ON
OFF
ON
OFF
DIP 3
ON
ON
OFF
OFF
DIP 4
OFF
OFF
OFF
OFF
5.8GHz Wireless Multi - Receiver
5.8GHz Wireless Multi - Receiver
KW5301 MANUAL
KW5301070622-001
CHAPTER TABLE OF CONTENTS
8. Specifications
1.CE Statement…………………………………………….......... 2
Receiving Frequency Band
5740~5860GHz
2.Important-Safety precautions…………………………....... 2
Input Signal Level Range
-85dBm ~-10dBm
Antenna Connector
SMA female connector
Channel Input Gain Control Level
+15~-30 dB adj.
Noise Figure
3dB
Video Output
1V p-p ＠ 75 ohm
3.Checking Contents of Box………………….…………........
4. Panel Controls and Features………………………...........
5.Installation of the system……………………………….......
Output Port
4 BNC female connector
6.Orienting Device for Optimum Performance………........ 9
Power connector (DC Jack)
5.5Ø2.1
7. Troubleshooting, Care and maintenance…………......... 9
Power Supply
12VDC/2A
Dimension
216mm×183mm×46mm
Weight
1420 g
Operating temperature
0°C~50°C
8. Specifications……………………………………………....... 10
All specification subject to change without notice
10
6.Orienting Device for Optimum Performance
1. Important-Safety Precautions
■ To
This device should be placed on a flat, stable surface to prevent damage to it from falling.
■
Since all homes are different for optimum reception, additional slight rotate antenna
may be necessary.
■
For optimum performance you maybe rotate the channel input gain control on the
device individually when you use the device.
7. Troubleshooting, Care and maintenance
prevent fire or shock hazard, do not expose this device to rain or moisture.
avoid electrical shock, do not open this device.
■ This device should be operated to use only the power supply included with it or
provided as an accessory.
■ Do not overload wall outlets
■ Do not attempt to service this device yourself. Refer servicing to qualified personnel only.
■ To
Note:
The user is encouraged to try to correct the interference by one or more of the following
measures:
■ Reorient
Please read this owner's manual carefully and follow the steps described in it. If you still have
difficulties, consult the following table. It will guide you though the most common problems and
their solutions
Problem
Cautions:
Possible solutions
■ Check
No picture
or relocate the receiving antenna.
distance between the equipment and receiver.
■ Connect the equipment into a different circuit outlet from the receiver's.
■ Consult with the dealer or an experienced radio/TV technician for help.
■ Increase
all cable connections.
■ Make sure power plugs are pushed all the way in.
■ Check power switches on the digital color quad process or or
digital video recorder or monitor.
■ Check the power on/off switches on the camera and the device
1.Screw 5.8GHz antenna to the antenna socket at the rear of the camera first
before plug in the power cord.
2.Changes or modifications are not expressly permitted.
3.Put the movable antenna as high as possible for best performance.
Notice : The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
■ Adjust
Interference:
Noisy picture
antenna orientation of camera and the device.
■ Adjust the channel input gain control of the device.
■ If using a microwave oven, turn it off.
■ Remove microwave oven from path between camera and
the device.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,
no change to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements and void
user’s authority to operate the device.
■ Operation With 4 Monitors
3. Checking Contents of Box
Make sure that all of the items shown as below are included
with your 5.8 GHz Wireless Multi-Receiver System. If something is missing,
please contact your dealer as soon as possible.
1.
2.
3.
4.
5.
5.8GHz Wireless Multi - Receiver
KW5301 MANUAL
1. 4 Channels Multi-Receiver
x1
2. 2.4GHz Wireless dipole Antenna
X1
3. Power Adapter
x1
4. Manual In English
x1
Be sure to set the power switch on the device and monitors to the off
position before processor with the following steps
5.Metal Sheet for magnetic antenna
■ Operation With Digital Video Recorder and Monitor
4. Panel Controls and Features
The following illustrations show the names of each component,button and switch
connectors on the receiver.
FRONT VIEW FOR THE MULTI-RECEIVER
Power ON/OFF Switch
5V Power LED Indicator
12V Power LED Indicator
REAR VIEW FOR THE MULTI-RECEIVE
Be sure to set the power switch on the device and Digital Video Recorder
and monitor to the off position before processor with the follow steps
ANT SMA Female Connector
BNC Female Connector for CH1 Video Output
BNC Female Connector for CH2 Video Output
BNC Female Connector for CH3 Video Output
BNC Female Connector for CH4 Video Output
12V DC input power connector
5.Installation of the system
Make sure the POWER switch is on the『OFF 』position before connection
■ Operation
With Digital Color Quad Processor and Monitor
OR
This system is suggested to match following equipment:
Be sure to set the power switch on the device and digital color quad processor
and monitor to the off position before processor with the follow steps
˙Wireless Cameras.
˙Digital Color Quad Processor
˙Digital Video Recorder.
5. Install the metal sheet for magnetic antenna
or
1.Put the antenna as high as possible. Higher than body tall is better.
2.Fixed the metal sheet on the best performance position.
3.Put antenna on the metal sheet and adjust for best performance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 0000:01:01 00:00:00Z
Modify Date                     : 2007:09:17 11:44:04+08:00
Creator                         : CorelDRAW 版本 12.0
Profile CMM Type                : KCMS
Profile Version                 : 2.0.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : Lab
Profile Date Time               : 1998:06:11 08:50:19
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : KODA
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.96367 1 0.8241
Profile Creator                 : KODA
Profile ID                      : 0
A To B0                         : (Binary data 50740 bytes, use -b option to extract)
Blue Matrix Column              : 0.14305 0.06061 0.7139
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
B To A0                         : (Binary data 119914 bytes, use -b option to extract)
Profile Copyright               : Copyright (c) 1996 Eastman Kodak Company, All Rights Reserved.
Device Mfg Desc                 : Internal RGB
Device Model Desc               : sRGB
Green Matrix Column             : 0.38512 0.7169 0.09706
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Luminance                       : 95.04559 100 108.90581
Media White Point               : 0.85941 0.8913 0.7357
Profile Description             : Internal RGB KODAK sRGB Display
Red Matrix Column               : 0.43605 0.22249 0.01392
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Viewing Cond Desc               : D65 monitor with typical user interface, gray surround, and roughly 1.8 gamma
Viewing Cond Illuminant         : 0.9505 1 1.0891
Viewing Cond Surround           : 0.19009 0.2 0.2178
Viewing Cond Illuminant Type    : D65
Page Count                      : 10
Creation Date                   : 0-01-01T00:00:00Z
Mod Date                        : 2007:09:17 11:44:04+08:00
Producer                        : Corel PDF Engine Version 1.0.0.536
Metadata Date                   : 2007:09:17 11:44:04+08:00
Title                           : KW5301070622-001

EXIF Metadata provided by EXIF.tools