Kvh Industries Tracvision G8 Users Manual Owner's

2015-02-09

• Quick Reference Guide
• Welcome Page
• Table of Contents
• Guide to Operation
  • 1 - System Overview
  • 2 - Receiving Satellite Signals
  • 3 - Turning On the System
  • 4 - Changing Channels and Switching to the Second Satellite
  • 5 - Watching Television
  • 6 - Using the MCU Interface
• Guide to Technical Information
  • 1 - Introduction
    • 1.1 - System Overview
    • 1.2 - System Components
    • 1.3 - Materials Provided with the TracVision G8
  • 2 - Installation
    • 2.1 - Planning the Installation
    • 2.2 - Mounting the TracVision Antenna
    • 2.3 - Connecting the Receiver(s)
    • 2.4 - Wiring the MCU
    • 2.5 - Mounting the MCU
    • 2.6 - Activating/Programming the Receiver
    • 2.7 - Installing Satellites Using the MCU
    • 2.8 - Checking Out the System
    • 2.9 - Changing Geographic Location
  • 3 - Using the MCU Interface
    • 3.1 - Startup and Self-test
    • 3.2 - Main Display and Accessing the Main Menu
    • 3.3 - Installing Satellites
    • 3.4 - Restarting the Antenna
    • 3.5 - Operations Mode
  • 4 - Troubleshooting
    • 4.1 - Troubleshooting Matrix
    • 4.2 - Causes and Remedies for Common Operational Issues
    • 4.3 - Receiver Troubleshooting
    • 4.4 - Antenna Gyro and LNB Faults
    • 4.5 - Computer Diagnostics
    • 4.6 - Maintenance Port Antenna Commands
  • 5 - Maintenance
    • 5.1 - Warranty/Service Information
    • 5.2 - Preventive Maintenance
    • 5.3 - TracVision G8 Field Replaceable Units
    • 5.4 - Accessing Antenna Components Through the Hatch
    • 5.5 - Replacing the PCB Module Fuse
    • 5.6 - Replacing the PCB Module
    • 5.7 - Replacing the RF PCB
    • 5.8 - Replacing the Internal Sensor
    • 5.9 - Replacing the Azimuth Gyro
    • 5.10 - Replacing the Elevation Gyro
    • 5.11 - Replacing the Azimuth Motor
    • 5.12 - Replacing the Azimuth Belt
    • 5.13 - Replacing the Elevation Motor
    • 5.14 - Replacing the Elevation Belt
    • 5.15 - Replacing the Skew Motor
    • 5.16 - Replacing the Skew Belt
    • 5.17 - Replacing the LNB
    • 5.18 - Replacing the LNB/Feed Tube Assembly
    • 5.19 - Preparing for Shipment
  • Appendices
    • A - System Specifications
    • B - MCU Flush Mount Panel Template
    • C - Startup Data Sequence
    • D - Maintenance Port Antenna Commands
• Index