Kyocera E4750 Feature Phone User Manual

Kyocera Corporation Feature Phone

Contents

User Manual

Download: Kyocera E4750 Feature Phone User Manual
Mirror Download [FCC.gov]Kyocera E4750 Feature Phone User Manual
Document ID3414422
Application ID9Dy7TAwMzHvzwwiWByfOWA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize120.68kB (1508539 bits)
Date Submitted2017-06-06 00:00:00
Date Available2017-12-04 00:00:00
Creation Date2017-05-26 18:06:00
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2017-05-27 00:11:01
Document TitleUser Manual
Document CreatorMicrosoft® Word 2010
Document Author: Rob Nussbaum

DuraTR
User Guide
Table of Contents
Getting Started .............................................................................................................................................. 1
Introduction ........................................................................................................................................... 2
About the User Guide ................................................................................................................... 2
Set Up Your Phone ............................................................................................................................... 3
Parts and Functions ...................................................................................................................... 3
Battery Use ................................................................................................................................... 5
Battery Capacity.................................................................................................................... 6
Insert the Battery................................................................................................................... 6
Remove the Battery .............................................................................................................. 7
Charge the Battery ................................................................................................................ 8
SIM Card ....................................................................................................................................... 9
SD Card ...................................................................................................................................... 10
Insert an SD Card ............................................................................................................... 11
Unmount and Remove an SD Card .................................................................................... 11
Format an SD Card ............................................................................................................. 12
Turn Your Phone On and Off ...................................................................................................... 12
Basic Operations ................................................................................................................................. 13
Basics .......................................................................................................................................... 13
Navigate Through the Menus ............................................................................................. 13
Phone Number ............................................................................................................................ 14
Airplane Mode ............................................................................................................................. 14
Enter Text.................................................................................................................................... 14
Key Function ....................................................................................................................... 14
Select a Text Input Mode .................................................................................................... 15
Abc Mode ............................................................................................................................ 15
XT9Word ............................................................................................................................. 15
Set Text Entry Options ........................................................................................................ 16
Copy and Paste Text .......................................................................................................... 16
Lock and Unlock Your Phone ..................................................................................................... 17
Update Your Phone .................................................................................................................... 17
Update Your Phone ............................................................................................................ 17
Your Phone's Home Screen................................................................................................................ 19
Home Screen Basics .................................................................................................................. 19
TOC
Status Bar ........................................................................................................................... 20
Making Connections .................................................................................................................................... 22
Phone Calls and Voicemail ................................................................................................................. 23
Place and Answer Calls .............................................................................................................. 23
Call Using the Phone Keypad ............................................................................................. 23
Call Emergency Numbers ................................................................................................... 23
Answer Phone Calls............................................................................................................ 24
In-Call Operations ............................................................................................................... 25
Place a Call from Contacts ................................................................................................. 26
Call from Recent calls ......................................................................................................... 26
Call a Phone Number with Pauses ..................................................................................... 26
Call Using a Speed Dial Number ........................................................................................ 27
Call Using the Plus (+) Code .............................................................................................. 27
Call a Phone Number in a Message ................................................................................... 27
Voicemail..................................................................................................................................... 27
Voicemail Setup .................................................................................................................. 28
Voicemail Notification.......................................................................................................... 28
Retrieve Your Voicemail Messages .................................................................................... 28
Optional Calling Services ............................................................................................................ 29
Caller ID Blocking ............................................................................................................... 29
Call Waiting ......................................................................................................................... 29
Conference Calling ............................................................................................................. 30
Call Forwarding ................................................................................................................... 30
Call Settings ................................................................................................................................ 30
Any Key Answer .................................................................................................................. 31
Auto Answer ........................................................................................................................ 31
Quick Responses ................................................................................................................ 31
Set Up Speed Dialing.......................................................................................................... 31
Voicemail settings ............................................................................................................... 32
North American Dialing ....................................................................................................... 32
International Dialing ............................................................................................................ 32
Voice Privacy ...................................................................................................................... 32
DTMF Tones ....................................................................................................................... 32
Contacts .............................................................................................................................................. 33
Add Contacts............................................................................................................................... 33
TOC
ii
View Contacts ............................................................................................................................. 34
Contacts List ............................................................................................................................... 34
Edit Contacts ............................................................................................................................... 35
Delete Contacts .......................................................................................................................... 36
Add a Group and Group Contacts .............................................................................................. 37
Edit a Group Contact .................................................................................................................. 37
Add or Remove a Group Contact Entry, or Rename a Group ............................................ 37
Delete a Group Contact ...................................................................................................... 38
Find Contacts Entries .................................................................................................................. 38
ICE (In Case of Emergency) Contacts ........................................................................................ 39
Share Contacts ........................................................................................................................... 40
Import Contacts ........................................................................................................................... 40
Back Up Contacts ....................................................................................................................... 40
Messaging ........................................................................................................................................... 42
Text and Multimedia Messaging ................................................................................................. 42
Send a Message ................................................................................................................. 42
Save and Resume a Draft Message ................................................................................... 43
New Messages Notification ................................................................................................ 43
Manage Message Conversations ....................................................................................... 43
Text and MMS Options ....................................................................................................... 44
Emergency Alerts ........................................................................................................................ 45
Email ........................................................................................................................................... 46
Add Email Accounts ............................................................................................................ 46
Add a Corporate Account ................................................................................................... 47
Create and Send Email ....................................................................................................... 47
Open Email Messages ........................................................................................................ 49
Delete Email Accounts ........................................................................................................ 49
Manage Your Email Inbox .................................................................................................. 50
Email Settings ............................................................................................................................. 50
Internet ................................................................................................................................................ 52
Data Services General Information (4G LTE and 3G Networks) ................................................ 52
4G LTE ................................................................................................................................ 52
Your User Name ................................................................................................................. 52
Data Connection Status and Indicators .............................................................................. 53
Internet Browser .......................................................................................................................... 53
TOC
iii
Use the Internet Browser .................................................................................................... 53
Learn to Navigate the Web ................................................................................................. 53
Browser Menu ..................................................................................................................... 55
Connectivity......................................................................................................................................... 58
Wi-Fi ............................................................................................................................................ 58
Turn Wi-Fi On and Connect to a Wireless Network ............................................................ 58
Wi-Fi Settings ...................................................................................................................... 59
Disconnect Wi-Fi ................................................................................................................. 59
Bluetooth ..................................................................................................................................... 59
Enable the Bluetooth Feature ............................................................................................. 60
Supported Bluetooth Profiles .............................................................................................. 60
Bluetooth Settings Menu ..................................................................................................... 61
Pair Bluetooth Devices........................................................................................................ 61
Send Information Using Bluetooth ...................................................................................... 61
Receive Information via Bluetooth ...................................................................................... 62
Hotspot ........................................................................................................................................ 62
Tethering ..................................................................................................................................... 63
Transfer Files between Your Phone and a Computer ........................................................ 63
Apps and Entertainment.............................................................................................................................. 65
Camera and Video .............................................................................................................................. 66
Take Pictures and Record Videos .............................................................................................. 66
Take a Picture ..................................................................................................................... 66
Record Videos .................................................................................................................... 67
View Pictures and Videos ................................................................................................... 67
Send Pictures and Videos ........................................................................................................... 69
Send Pictures or Videos by Email ...................................................................................... 69
Send a Picture or Video by Multimedia Message ............................................................... 69
Send Pictures or Videos Using Bluetooth ........................................................................... 70
Camera Settings ......................................................................................................................... 70
Productivity.......................................................................................................................................... 72
Calendar...................................................................................................................................... 72
Add an Event to the Calendar ............................................................................................. 72
Add a Task .......................................................................................................................... 73
Invite Guests to Your Calendar Event ................................................................................ 73
Calendar Event Alerts ......................................................................................................... 74
TOC
iv
View Calendar Events......................................................................................................... 75
Edit Calendar Events .......................................................................................................... 75
Calculator .................................................................................................................................... 76
Tip Calculator ...................................................................................................................... 77
Unit Converter ..................................................................................................................... 77
Sound Recorder .......................................................................................................................... 77
Music Player................................................................................................................................ 79
Play Music ........................................................................................................................... 79
Use Playlists ....................................................................................................................... 80
Alarm ........................................................................................................................................... 81
Countdown Timer ........................................................................................................................ 81
Stopwatch ................................................................................................................................... 82
File Manager ............................................................................................................................... 82
Open Files in File Manager ................................................................................................. 82
File Manager Options.......................................................................................................... 83
Voice Services ............................................................................................................................ 83
Automatic Speech Recognition (ASR) ................................................................................ 83
World Clock ................................................................................................................................. 87
Notepad....................................................................................................................................... 87
Flashlight ..................................................................................................................................... 88
Settings ....................................................................................................................................................... 89
Wireless & Networks Settings ............................................................................................................. 90
Wi-Fi Settings Menu .................................................................................................................... 90
Bluetooth Settings ....................................................................................................................... 91
Bluetooth Settings Menu ..................................................................................................... 91
More Settings .............................................................................................................................. 91
Hotspot Settings .................................................................................................................. 91
Virtual Private Networks (VPN) ........................................................................................... 92
Cellular Network Settings ................................................................................................... 94
Restrict Background Data ........................................................................................................... 95
Device Settings ................................................................................................................................... 96
Call Setup.................................................................................................................................... 96
Display Settings .......................................................................................................................... 96
Sound & Notification Settings ..................................................................................................... 97
Programmable Key Settings ....................................................................................................... 99
TOC
Navigation Key Shortcuts ............................................................................................................ 99
Keyguard ................................................................................................................................... 100
Storage Settings ....................................................................................................................... 100
Connectivity Settings ................................................................................................................ 101
Personal Settings .............................................................................................................................. 102
Location Settings ...................................................................................................................... 102
Security Settings ....................................................................................................................... 102
Lock Screen Settings ................................................................................................................ 102
Screen Lock ...................................................................................................................... 103
Disable the Screen Lock ................................................................................................... 103
Other Security Settings ..................................................................................................... 103
Accounts ................................................................................................................................... 104
Language & Input Settings........................................................................................................ 104
Language Settings ............................................................................................................ 105
Text Entry .......................................................................................................................... 105
Reset Your Phone and Phone Content .................................................................................... 105
System Settings ................................................................................................................................ 106
Date and Time Settings ............................................................................................................ 106
Accessibility Settings ................................................................................................................ 106
About Phone ............................................................................................................................. 109
System Update ......................................................................................................................... 109
Getting Help .............................................................................................................................................. 111
For Assistance .................................................................................................................................. 112
Troubleshooting ........................................................................................................................ 112
Specifications ............................................................................................................................ 112
Copyright Information ................................................................................................................ 113
Index.......................................................................................................................................................... 114
TOC
vi
Getting Started
The following set of topics will introduce you to your phone, help you get set up with service, provide an
overview of the phone screen, and get you started with basic phone operations.
Introduction
The following topics describe the basics of using this guide and your new phone.
About the User Guide
Thank you for purchasing your new DuraTR. The following topics explain how best to use this guide to get
the most out of your phone.
Before Using Your Phone
Read the Get Started guide that was packaged with your phone.
Accessible services may be limited by subscription contract conditions.
Descriptions in the User Guide
Note that most descriptions in this guide are based on your phone's setup at the time of purchase. Unless
otherwise noted, instructions begin from the phone's home screen. Some operation descriptions may be
simplified.
Instructions to perform tasks in this guide may change depending on the version of software or application
on your phone.
All screens in this guide are simulated. Actual displays may vary.
Certain features, services and applications are network dependent and may not be available in all areas;
additional terms, conditions and/or charges may apply. Contact your service provider about feature
availability and functionality.
All features, functionality and other specifications, as well as the information contained in this guide are
based upon the latest available information and are believed to be accurate at the time of issuing.
Kyocera International, Inc. reserves the right to change or modify any information or specifications without
notice or obligation.
For warranty service information, please refer to the Safety and Warranty Information installed in the
phone or call the following telephone number from anywhere in the continental United States and
Canada: 1-800-349-4478.
Screenshots and Key Labels
Screenshots and other illustrations in this user guide may appear differently on your phone. Key labels in
the user guide are simplified for description purposes and may differ from your phone's display.
Other Notations
In the user guide, the phone may be referred to either as "phone," "device," or "handset." A microSD™ or
microSDHC™ card is referred to as an "SD card" or a "memory card." A micro-USB cable is referred to as
an "USB cable"or a "USB/Charger cable".
Introduction
Set Up Your Phone
The following topics give you all the information you need to set up your phone and wireless service the
first time.
Parts and Functions
These topics illustrate your phone’s primary parts and key functions.
Note: Your phone's screen layouts are subject to change. This user guide uses sample images only.
Phone Layout
The following illustration outlines your phone’s primary external features and keys.
Set Up Your Phone
Part
Description
Earpiece
Lets you hear the caller and automated prompts.
LED indicator
Displays a phone notification, charging status, or alert.
Screen
Displays all the information needed to operate your phone, such as the
call status, the Contacts list, the date and time, and the signal and
battery strength.
Left/Right softkeys
Let you select softkey actions or menu items corresponding to the
bottom left or right lines on the screen.
Menu/OK key
Lets you select the highlighted choice when navigating through a
menu, or softkey actions or menu items corresponding to the bottom
center lines on the screen.
Recent apps key
Lets you open a list of functions you have worked with recently.
Talk key
Allows you to place or receive calls, answer Call Waiting, use 3-Way
Calling, or activate Automatic Speech Recognition (ASR).
Speaker key
Lets you place or receive calls in speakerphone mode, turn the
speakerphone on and off during a call or activate Automatic Speech
Recognition (ASR).
Microphone
Transmits your voice and ambient sound during voice calls, voice
recordings and videos.
Navigation key
Lets you scroll through the phone’s menu options.
Back/delete key
Deletes characters from the display in text input mode. When in a
menu, pressing it returns you to the previous menu. This key also
allows you to return to the previous screen in a data session.
End/Home/Power key
Lets you turn the phone on or off, end a call, or cancel your input and
return to the Home screen.
Keypad
Lets you enter numbers, letters, and characters, and perform
functions.
Speaker
Lets you hear the different ringtones and sounds. The speaker also
lets you hear the caller’s voice in speakerphone mode.
Headset jack
Allows you to plug in an optional headset for convenient, hands-free
conversations.
Set Up Your Phone
PTT/Programmable button
Allows you to assign a frequently used function for quick access. By
installing PTT (push-to-talk) application, this key can also act as a PTT
key. See Programmable Key Settings.
Please contact your service provider to know when the PTT service
starts.
Volume button
Allows you to adjust the ringtone or media volume or adjust the voice
volume during a call.
Charger/USB port
Allows you to connect the phone charger or the USB cable (included).
Remote Speaker Microphone
Connector
Allows you to plug in an optional 7-pin remote speaker microphone for
convenient use.
Allows you to start SOS app.
SOS button
Press this button for 0.5 seconds to display the explanation screen of
SOS app, and press it again on this screen to start SOS app.
Camera lens
As part of the built-in camera, lets you take pictures and videos.
Flash
Helps illuminate subjects in low-light environments when the camera is
focusing and capturing a picture or video.
Battery cover screw
Secures the battery cover to the phone.
Charging contacts
Allow you to connect to a multi-bay battery charger that can charge
multiple phones simultaneously.
SIM card slot (internal)
Allows you to insert a SIM card. The SIM compartment is behind the
battery. See Replace the SIM Card.
microSD card slot (internal)
Allows you to insert an optional microSD card to support external
memory. The microSD compartment is behind the battery. See Insert
an SD Card.
CAUTION! Inserting an accessory into the incorrect jack may damage the phone.
Battery Use
The following topics explain how to insert and remove your phone’s battery.
Battery Cautions
Storage: Avoid storing battery with no charge remaining. Saved information and settings may
become lost or changed, or battery may become unusable. If storing for a long period of time, charge
device once every six months.
Set Up Your Phone
Replacing Battery: The battery is a consumable item. It needs to be replaced if operating time
shortens noticeably. Purchase a new battery.
Cleaning: Clean soiled terminals between battery and phone with a clean, dry cotton swab. Soiled
terminals can result in a poor connection and prevent charging, etc.
Warning: Use only Kyocera-approved batteries and chargers with your phone. The failure to use a
Kyocera-approved battery and charger may cause damage to your device and void the warranty.
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It allows you to recharge your battery before it
is fully drained.
For a quick check of your battery level, glance at the battery charge icon located in the upper right corner
of the Home screen. When there are approximately ten minutes of talk time left, the battery icon turns to
and the phone sounds a warning tone. When there are approximately five minutes of talk time left, the
battery icon turns to
Note: Long backlight settings, searching for service, vibrate mode, browser use, and other variables may
reduce the battery’s talk and standby times.
Tip: Watch your phone’s battery level and charge the battery before it runs out of power.
Insert the Battery
Follow these instructions to insert your phone’s battery safely and properly.
1. Using a coin, rotate the battery cover screw on the back of the phone counter-clockwise several
times to loosen (you should hear a 'click' sound when the screw is loose).
Note: The battery cover screw is permanently mounted on the cover and cannot be removed.
2. Insert your fingernail into the slot at the left side of the battery cover and lift the battery cover.
Set Up Your Phone

Lift gently in the direction shown.
3. Insert the battery, contacts end first (

), and gently press the battery into place (
).
Align the contacts of the battery with the contacts in the phone.
4. Replace the battery cover.

Make sure all the tabs are secure and there are no gaps around the cover.
CAUTION! Press all around the edges of the battery cover ensuring it is properly sealed to maintain the
phone's waterproof capability.
5. Using a coin, rotate the battery cover screw clockwise until it is tight.
Remove the Battery
Follow these instructions to remove your phone’s battery. Always power the phone off before removing
the battery.
1. Using a coin, rotate the battery cover screw on the back of the phone counter-clockwise several
times to loosen.
Set Up Your Phone
2. Remove the battery.

Lift upward gently.
3. Attach the battery cover. See Insert the Battery.
CAUTION! Do not handle a damaged or leaking Li-Ion battery as you can be burned.
Charge the Battery
Follow these instructions to charge your phone’s battery using either the included AC adapter or via a
USB connection on your computer.
Charge Using the AC Adapter
Fully charge the battery before powering on the phone.
1. Open the Charger/USB port cover at the left side of the phone.
2. Plug the smaller end of the micro-USB cable into the phone’s charger/USB port.
3. Plug the other end of the USB cable into the AC adapter.
4. Plug the AC adapter into an electrical outlet.
 The LED indicator light at the top of the Home screen illuminates when charging starts.
5. After charging, disconnect the phone from the charger.

Unplug the AC adapter from the outlet, and remove the USB cable from the phone and the
AC adapter.

Close the cover.
Warning: Be sure all ports and covers are properly sealed to maintain the phone's waterproof capability.
Note: Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up
your voicemail, and make a call. You should fully charge your battery as soon as possible.
Note: Please use only an approved charger to charge your phone. Improper handling of the charging port,
as well as the use of an incompatible charger, may cause damage to your device and void the warranty.
Set Up Your Phone
Charge Using a PC Connection
Before using a PC connection to charge your phone, ensure that the computer is turned on. Depending
on the type of connection, your phone’s battery may not charge.
1. Open the charger/USB port cover at the left side of the phone.
2. Insert the small end of the micro-USB cable into the charger/USB port.
3. Insert the large end of the USB cable into an external USB port on your computer.
4. After charging, remove the USB cable from both the phone and the computer, and close the
cover.
SIM Card
The SIM card is an IC card containing phone number and other customer information. Your phone’s SIM
card is preinstalled and should only be accessed if directed by a customer service representative.
Replace the SIM Card
Follow these instructions to replace the SIM card. Remember to power off your phone before replacing a
SIM card.
Note: Your phone’s SIM card is preinstalled. These instructions are for reference only.
1. Remove the battery cover and battery. (See Remove the Battery.)
2. Lift the SIM/SD card stopper.
3. Push the SIM card gently with your finger (
card from the slot (
Set Up Your Phone
). The card ejects itself. Pull out the original SIM
).
4. Insert the SIM card.

Insert gently with gold IC chip facing downward and the cut-off corner at the upper left (
).
Note: Make sure you insert your SIM card in the correct orientation.
5. Close the SIM/SD card stopper.
6. Place the battery back into its compartment. (See Insert the Battery.)

Align the contacts of the battery with the contacts in the phone.
7. Replace the battery cover.

Make sure all the tabs are secure and there are no gaps around the cover.
SD Card
Your phone supports the use of an optional SD card (not included) to expand its storage capacity. It
supports cards up to 32 GB. Some cards may not operate properly with your phone.
SD Card Cautions
Data: Information stored on an SD card can become lost or changed accidently or as a result of
damage. It is recommended that you keep a separate copy of important data.
Reading/Writing Data: Never power off or remove the battery while reading or writing data.
Battery Level: A low battery charge may prevent reading/writing to an SD card.
Set Up Your Phone
10
Handling SD Card: Use/store SD cards away from the reach of infants. May cause choking if
swallowed.
Insert an SD Card
Follow these steps to insert an optional SD card (not included). Make sure to power your phone off before
inserting or removing an SD card.
1. Remove the battery cover and battery. (See Remove the Battery.)
2. Lift the SIM/SD card stopper.
3. Insert SD card into the SD card slot.

Insert SD card all the way gently without bending and with the gold terminals facing down.

Gently push the card in until it fits into the slot.

Insert only SD cards.
4. Close the SIM/SD card stopper.
5. Place the battery back into its compartment. (See Insert the Battery.)

Align the contacts of the battery with the contacts in the phone.
6. Replace the battery cover.

Make sure all the tabs are secure and there are no gaps around the cover.
Unmount and Remove an SD Card
Follow these instructions to unmount and remove an SD card. Always unmount an SD card before
removing it from your phone, and always power the phone off before inserting or removing an SD card.
1. From home, press
> Settings > Device > Storage.
2. Scroll down the screen, and select Unmount SD card, and then press Yes (left softkey).
 The menu option name changes from Unmount SD card to Mount SD card. The card is
now unmounted.
Set Up Your Phone
11
3. Press and hold the
to turn off your phone.
4. Remove the battery cover and battery. (See Remove the Battery.)
5. Lift the SIM/SD card stopper.
6. Remove the SD card.
7. Close the SIM/SD card stopper.
8. Put the battery back and replace the battery cover. (See Insert the Battery.)
Format an SD Card
When you insert an optional SD card for the first time, it is recommended that you format it on your phone.
Note: Formatting an SD card permanently erases all data stored on the card. It is recommended you back
up any card contents to your computer before formatting the SD card.
1. From home, press > Settings > Device > Storage.
2. Scroll down the screen, and select Erase SD card.
3. Read the disclaimer and press OK (center softkey) > Yes (left softkey) to continue.
 All data on the SD card is erased, and the card is formatted for use on your phone.
Turn Your Phone On and Off
The instructions below explain how to turn your phone on and off.
Turn Your Phone On
■
Press and hold
 Your phone will power on. Depending on the settings, you may see the lock screen.

See Lock and Unlock Your Screen and Screen Lock for information about using the screen
lock.
Turn Your Phone Off
■
Press and hold the
until you see the powering-down animation on the screen.
 Your phone will power off. Your screen remains blank while your phone is off (unless the
battery is charging).
Set Up Your Phone
12
Basic Operations
The following topics outline basic features and operations of your phone.
Basics
The following topics offer an overview of your phone’s basic operations.
Navigate Through the Menus
The navigation key on your phone lets you scroll through onscreen items. To navigate through a menu,
press the navigation key up or down.
Many menus feature a scroll bar on the right to help you keep track of your position in the menu.
Select Menu Items
As you navigate through the menu, menu options are highlighted. Select any option by highlighting it and
pressing
. If the option is numbered, you can select it by pressing the corresponding number on the
phone’s keypad.
For example, to view the Brightness level screen:
1. Press
to access the main menu.
2. Select Settings by highlighting it and pressing
3. Select Device by highlighting it and pressing
4. Select Display by highlighting it and pressing
5. Select Brightness level by highlighting it and pressing
For the purposes of this guide, the above steps condense into:
■
Press
> Settings > Device > Display > Brightness level.
Move between the Tabs
The navigation key on your phone lets you move between the tabs too. To move from a tab to another tab,
press the navigation key left or right.
Back Up Within a Menu
To go to the previous menu:
■
Press
Basic Operations
13
To return to Home screen:
■
Press
Navigation Key Shortcuts
■
From home, press the Up, Down, Left or Right Navigation keys to launch its corresponding
application. The Up, Down, Left or Right Navigation keys can be reassigned to create customized
shortcuts. See Navigation Key Shortcuts for more information.
Phone Number
Follow the instructions below to display your phone’s wireless phone number.
1. From home, press
> Settings > System > About phone > Status.
 You will see the number listed under My phone number.
Airplane Mode
Airplane mode turns off all functions that emit or receive signals, while leaving your phone on so you can
use apps that don’t require a signal or data connections.
To turn on or off airplane mode:
1. From home, press
> Settings > Wireless & networks > More > Airplane mode.
2. Select On or Off to turn Airplane mode on or off.
●
When your phone is in airplane mode, you will see the airplane mode icon
in the status bar.
Enter Text
Your phone provides convenient ways to enter letters, numbers, and symbols whenever you are
prompted to enter text.
Key Function
For text entry, you can use the following keys as mentioned below.
●
Press
●
Press
to enter some frequently used symbols, such as period, comma,‘, 1, @, ?, !, *, #, /.
Note that each time you press the key the next symbol appears. This function is not available in
XT9 Word mode and 123 mode.
●
Press
●
Press
to change the capitalization style as Abc > ABC > abc (ABC mode), or as XT9Word
> XT9WORD > XT9word (XT9Word mode). The selected style is displayed in the bottom-left
corner of the screen, above the left softkey label (if applicable).
Basic Operations
to delete characters from the display.
to enter a space or long press for Return (if available).
14
Select a Text Input Mode
When entering text, you can change the input mode or access the text options menu.
1. From a screen where you can enter text, press the left softkey to change the text input mode.

The actual text input mode is displayed in the bottom-left corner of the screen, above the left
softkey label.
2. Select one of the following options (available options vary depending on the field):

Abc to enter characters by using the alphabet mode. See Abc Mode.

XT9Word to enter text using a predictive text system. See XT9Word.

123 to enter numeric characters.

Symbols to enter symbols.

Smileys to enter smile icons.

Emoticons to enter “emoticons.”

Web shortcuts to enter Web shortcuts (for example, www., http://, or .com).
Note: When you select Symbols, Smileys, Emoticons, or Web shortcuts, a list may be displayed at the
bottom of the screen. Then, you can scroll through the options by pressing the navigation key left, right,
up or down. To select an option, highlight it and press
. In cases where the list is not displayed and < >
appears above the left softkey label, you can see the options by pressing the navigation key left or right.
Press
to select an option.

Select Text to select text for copying or cutting. See Copy and Paste Text.

Paste list to paste copied or cut text in the paste list (if applicable). See Copy and Paste Text.

Text options to display the text entry options menu. See Set Text Entry Options.
Abc Mode
In Abc mode, also known as multi-press entry, you press keys one, two, three, or four times to enter the
letters you see on the keypad. To switch between lowercase and uppercase, press
. After a
character is entered, the cursor automatically advances to the next space after two seconds or when you
enter a character on a different key.
1. Select the Abc text input mode. See Select a Text Input Mode.
2. Press the corresponding key repeatedly until the correct letter appears. For example, to enter
“Abc,” press
once for “a,” twice for “b,” and three times for “c.”
XT9Word
XT9Word can be used to enter text using a predictive text system that reduces the number of key presses
required while entering a word.
Basic Operations
15
Enter Text in the XT9 Mode
1. Select the XT9Word text input mode.
2. Press the corresponding keys once per letter to enter a word. (For example, to enter the word
“Bill,” press
character. Press and hold
.) (If you make a mistake, press
to erase a single
to erase an entire word.)
3. As you type, a word choice list opens. (The word may change as you type.) Press the navigation
key to scroll to the word you want to enter and press
to select it.
Note: If your desired word is not displayed after you have entered all the letters, you can add it to the
predictive text database for the next time. Press the left softkey > Text options > My words > Add word
(right softkey).
For more information about XT9, visit the Nuance website at www.nuance.com/.
Set Text Entry Options
The text entry options menu allows you to specify additional features to use during the text entry process.
1. When entering text, press the left softkey > Text options.
2. Highlight an option and press

Word complete to suggest possible words based on letters you have entered.

Next word complete to automatically display the word that may follow the current text input.

Word scan to allow the predictive text input system to recognize words by searching
Contacts.

Input language to select the language to enter (English or Spanish).

My words to edit or delete custom words you have added to the predictive text database.
•

Auto substitution to replace abbreviated words or phrases with full-text equivalents you
added.
•

Add word (right softkey) to store words that you frequently use.
Add word (right softkey) to store pairs of words that you want to use in this function.
Help to view the instructions on entering text.
Copy and Paste Text
You can copy or cut text and paste it in the text entry field.
1. In the text entry field, move the cursor next to the text you want to copy and press the left softkey
> Select Text.
Basic Operations
16
2. Press the navigation key and highlight the text you want to copy or cut.
3. Press Done (center softkey), highlight Copy or Cut, and then press Select (center softkey). The
text is saved in the Paste List.
4. In the text entry field, move the cursor to the place where you want to paste the text to and press
the left softkey > Paste list.
5. Press the navigation key to scroll to the text you want to paste and press Select (center softkey).
Note: This feature is not available where you cannot select the text input mode.
Lock and Unlock Your Phone
When your phone is locked, you can only make calls to 9-1-1 and the ICE contacts.
To save battery power, the phone automatically turns off the screen after a certain period of time when
you leave it idle. You will still be able to receive messages and calls while the phone’s screen is off.
Note: For information on how to adjust the time before the screen turns off, see Display Settings.
Turn the Screen On and Unlock It
1. To turn the screen on, press
2. If you have set up a screen lock, you will be prompted to enter the password or PIN. See Screen
Lock.
Update Your Phone
From time to time, updates may become available for your phone. You can download and apply updates
through the Settings > System > System Updates menu.
Software Update Cautions
During update: The phone cannot be used until the software update is complete. It may take time to
update your phone’s software.
Signal during update: Update your phone where signal reception is good, and do not change
location during the update process. Make sure the battery is adequately charged before beginning an
update. A weak signal or low battery during an update may cause the update to fail. An update failure
may disable the phone.
Other functions during update: Other phone functions cannot be used during a software update.
Update Your Phone
You can update your phone's software using the System Update option.
Basic Operations
17
Before Updating Your Phone
Updating your phone may result in a loss of saved data depending on the condition of your phone
(malfunctioning, damaged, water seepage, etc.). You must back up all critical information before updating
your phone firmware.
Update Your Phone
1. From home, press
> Settings > System > System updates.
2. Select one of the following options:

Update firmware to update the phone's firmware package.

Update profile to update your online user information.

Update PRL to update the phone's coverage area.

UICC unlock to unlock SIM card.
 Your phone automatically downloads and installs any available updates. You may be
required to power your phone off and back on to complete the software upgrade.
Basic Operations
18
Your Phone's Home Screen
The following topics describe how to use and customize your phone’s home screen, understand the
status bar, etc.
Home Screen Basics
The Home screen is the starting point for your phone’s functions and menus.
Home Screen Layout
Item
Description
Status bar
The status bar displays icons to notify you of your phone’s status (on the right
side) and notifications (on the left side).
Notification area
The notification area of the status bar (on the left) displays notifications for
incoming messages, missed calls, voicemail, and more.
Status area
The status area of the status bar (on the right) displays phone and service
status information such as signal strength, battery status, Wi-Fi and data
connectivity, ringer status, and time.
Clock display
Displays time and date. You can turn on or off this display from the Settings
menu. See Clock Display.
Left softkey
Displays actions or menu items that you can select by pressing the left
softkey.
Your Phone's Home Screen
19
Displays actions or menu items that you can select by pressing the center
Center softkey
softkey (
key).
Displays actions or menu items that you can select by pressing the right
softkey.
Right softkey
Status Bar
The status bar at the top of the home screen provides phone and service status information on the right
side and notification alerts on the left.
Note: Status and notification icons are subject to change. Not all icons are depicted below.
Main Status Icons
Icon
Status
®
Bluetooth active
®
Wi-Fi active
Location services active
Vibrate
Silent mode
Network (full signal)
Network (roaming)
LTE data service
4G data service
3G data service
Your Phone's Home Screen
20
Airplane mode
Battery (charging)
Battery (full charge)
Battery (discharged)
Main Notification Icons
Icon
Notification
New voicemail
New email
New text or MMS message
Event
Alarm
Emergency alerts
Note: Additional notification icons may appear.
Your Phone's Home Screen
21
Making Connections
The following set of topics will cover your phone’s ability to help you make connections, from phone calls
and maintaining contacts, to text messages, email, and Internet.
22
Phone Calls and Voicemail
The following topics outline the use of your phone's calling features to place and receive calls, use
voicemail, and more.
Place and Answer Calls
The following topics describe how to directly dial calls, how to answer incoming calls, and how to use the
in-call screen options.
Adjust In-Call Volume
■
Adjusting Call Volume: Press the Volume button up or down during the call.
Call Using the Phone Keypad
The most “traditional” way to place a call is by using the phone’s keypad.
1. Enter a phone number from the Home screen.
 If you make a mistake while dialing, press

to erase the numbers.
As you enter digits, the phone searches for contacts that match. If you see the number you
want to dial, highlight it.
2. Press
or Call (center softkey) to call the number.
 The phone dials the number. The call begins when the other party answers.
3. To end the call, press
 The call ends.
Troubleshooting
Question: Call does not connect.
Answer 1: Was the number dialed using the area code? If not, try dialing using the full 10-digit
number including the area code.
Answer 2: Are you in an area with poor wireless coverage? Try calling again from another area.
Call Emergency Numbers
You can place calls to 9-1-1 even if the phone’s screen is locked or your account is restricted.
To call the 9-1-1 emergency number:
■
Press
Phone Calls and Voicemail
, and then
or Call (center softkey).
23
 As long as you are in an area covered by wireless service, the emergency call is placed.
Enhanced 9-1-1 (E 9-1-1) Information
This phone features an embedded Global Positioning System (GPS) chip necessary for utilizing E 9-1-1
emergency location services where available.
When you place an emergency 9-1-1 call, the GPS feature of your phone seeks information to calculate
your approximate location. Depending on several variables, including availability and access to satellite
signals, it may take up to 30 seconds or more to determine and report your approximate location.
Important: Always report your location to the 9-1-1 operator when placing an emergency call. Some
designated emergency call takers, known as Public Safety Answering Points (PSAPs), may not be
equipped to receive GPS location information from your phone.
Answer Phone Calls
The following information lets you know how to answer incoming calls, mute the ringer on incoming calls,
reject incoming calls, and more.
When you receive a phone call from a contact, the incoming call screen appears and displays the caller
ID icon, name, and phone number of the calling party. When you receive a phone call from someone who
is not stored in Contacts, only the default caller ID icon and phone number appear on the incoming call
screen.
Note: If your phone is turned off, all calls automatically go to voicemail.
Answer an Incoming Call
1. Press
●
or
, or select Answer to answer an incoming call.
Depending on your settings, you may also answer incoming calls by pressing other keys. See
Any Key Answer.
 The call begins.
2. To end the call, press
 The call ends.
Mute the Ringing Sound
To mute the ringer without rejecting the call, you can do the following:

Press the Volume button down.
Reject an Incoming Call
■
When a call arrives, press
– or –
Phone Calls and Voicemail
24
Select Decline.
 The ringtone or vibration will stop and the call will be sent directly to voicemail.
Reject a Call and Send a Text Message
You can reject an incoming call and automatically send a text message to the caller.
1. When a call arrives, select Send message.
2. Select a message, and press
– or –
Select Write your own…, write a message, and then press Send (center softkey).
 The ringtone or vibration will stop and the text message will be delivered to the caller.
In-Call Operations
While you’re on a call, you can access a number of options.
1. Pressing Options (right softkey) during a call displays a list of available in-call features.
2. To select an option, highlight the option and press

Add call: Initiate a conference call (3-way call).

Go to Bluetooth settings: Display the Bluetooth settings (if applicable).

Use Bluetooth device: Switch the call to a Bluetooth device (if applicable).

Disconnect Bluetooth device: Disconnect the Bluetooth device (if applicable).

Go to Home screen: Display the phone’s Home screen.

Noise reduction: Improve the quality of the call using the earpiece.
Further options may also be available:
■
Press Mute/Unmute (center softkey) to mute/unmute the microphone.
■
Press Hold (right softkey) to place the current call on hold. This function is not available during a
call in CDMA network.
■
Press the Volume button up or down to adjust the receiver volume.
■
Press
to turn the speaker on. Press again to turn it off.
Warning: Because of higher volume levels, do not place the phone near your ear during speakerphone
use.
Phone Calls and Voicemail
25
Place a Call from Contacts
You can place phone calls directly from entries in your Contacts list.
1. From home, press
and select Contacts.
 The contacts list appears.
2. Highlight the entry you want to call.
3. Press
to dial the entry’s default phone number.
– or –
To dial another number from the same entry, press
or Call (center softkey).
, select a number, and then press
 The phone dials the number. The call begins when the other party answers.
4. To end the call, press
 The call ends.
Call from Recent calls
The recent calls list lets you quickly place calls to recent incoming, outgoing, or missed numbers.
1. From home, press
> Recent calls.
– or –
Press
to display your recent calls list.
 The recent calls list appears.
2. Highlight an entry and press
to place a call.
 The phone dials the number. The call begins when the other party answers.
3. To end the call, press
 The call ends.
Call a Phone Number with Pauses
You can dial numbers with pauses for use with automated systems, such as voicemail or credit card
billing numbers.
There are two options available to add pauses on your phone:
●
Wait will wait for your confirmation to send the rest of the digits when reached.
Phone Calls and Voicemail
26
●
2-sec pause automatically sends the next set of numbers after two seconds.
Note: You can have multiple pauses in a phone number and combine two-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press Options (right softkey) > Add wait or Add 2-sec pause.
3. Enter additional numbers.
4. Press
or Call (center softkey) to dial the number.
Call Using a Speed Dial Number
You can store up to 98 numbers in your phone’s speed dial memory to make contacting friends and family
easier.
You must have already assigned a speed dial number to an existing phone number. See Set Up Speed
Dialing.
■
From home, enter a speed dial number, and then press
or Call (center softkey).
 The display confirms that the number has been dialed when it shows “Connecting...”
Call Using the Plus (+) Code
When placing international calls, you can use Plus Code Dialing to enter the appropriate international
access code for your location (for example, 011 for international calls placed from the United States).
1. Press and hold
to display “+” on your phone screen.
2. Enter the country code and phone number, and then press
or Call (center softkey). (The
phone automatically prepends the access code for international dialing, followed by the country
code and phone number.)
Call a Phone Number in a Message
You can place a call to a number that appears in a message.
1. From home, press
> Messaging.
2. Select a message with the number you want to call, and press View (center softkey).
3. Highlight the number you want to call.
4. Press
or
> Call.
Voicemail
The following topics describe how to set up and use your phone's voicemail features.
Phone Calls and Voicemail
27
Voicemail Setup
Follow the instructions below to set up voicemail on your phone. You should set up your voicemail and
personal greeting as soon as your phone is activated. Always use a passcode to protect against
unauthorized access. Your phone automatically transfers all unanswered calls to your voicemail, even if
your phone is in use or turned off.
1. From home, press and hold
to dial your voicemail number.
 Your phone dials the voicemail access number.
2. Follow the system prompts to:

Create your passcode.

Record your name announcement.

Record your greeting.
Important: Voicemail Passcode – It is strongly recommended that you create a passcode when setting
up your voicemail to protect against unauthorized access. Without a passcode, anyone who has access
to your phone is able to access your voicemail messages.
Voicemail Notification
There are several ways your phone alerts you to a new voicemail:
●
By displaying a message on the screen.
●
By sounding the assigned ringtone type.
●
By displaying
at the top of the screen.
Note: Your phone accepts messages even when it is turned off. However, your phone notifies you of new
messages only when it is turned on and you are in the service area.
Retrieve Your Voicemail Messages
You can review your messages directly from your wireless phone or from any other touch-tone phone.
Use Your Phone to Access Your Messages
1. Press and hold
– or –
From home, press
> Messaging > Options (right softkey) > Voicemail > Call voicemail.
2. Enter your voicemail password if prompted.
3. Follow the voice prompts to listen to and manage your voicemail messages.
Note: You are charged for airtime minutes when you are accessing your voicemail from your wireless
phone.
Phone Calls and Voicemail
28
Use Another Phone to Access Messages
1. Dial your wireless phone number.
2. When your voicemail answers, press the asterisk key (*).
3. Enter your password.
Optional Calling Services
The following topics outline additional voice-related services available with your phone, including call
services and more.
Caller ID Blocking
Caller ID identifies a caller before you answer the phone by displaying the number of the incoming call. If
you do not want your number displayed when you make a call, follow these steps.
1. Enter
2. Enter the number you want to call.
3. Press
or Call (center softkey).
 Your caller information will not appear on the recipient’s phone.
To permanently block your number, call the company's customer service.
Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your phone’s
screen informs you that another call is coming in and displays the caller’s phone number (if it is available).
To respond to an incoming call while you’re on a call:
■
Press
or
 This puts the first caller on hold and answers the second call.
To switch back to the first caller:
■
Press SWAP(left softkey).
– or –
Press
Note: For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by
pressing
before placing your call. Call Waiting is automatically reactivated once you
end the call.
Phone Calls and Voicemail
29
Conference Calling
With conference calling, also known as 3-way calling, you can talk to two people at the same time. When
using this feature, the normal airtime rates (if applicable) will be charged for each of the two calls.
1. Enter a number and press
or Call (center softkey).
2. Once you have established the connection, press Options (right softkey) > Add call.
3. Select Contacts or Enter Phone#.
4. Select a number from your Contacts, or enter a number directly, and then press
(center softkey).
or Call
5. When you’re connected to the second party, press Options (right softkey) > Merge call to begin
your 3-way call.
Note: If one of the people you called hangs up during your call, you and the remaining caller stay
connected. If you initiated the call and are the first to hang up, all callers are disconnected.
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when your
phone is turned off. You can continue to make calls from your phone when you have activated Call
Forwarding.
Note: You are charged a higher rate for calls you have forwarded.
To activate Call Forwarding:
1. Enter
2. Enter the area code and phone number to which you want your calls forwarded.
3. Press
or Call (center softkey).
 You will hear a tone to confirm the activation of Call Forwarding. All calls to your wireless
number will be forwarded to the designated phone number.
To deactivate Call Forwarding:
1. Enter
2. Press
or Call (center softkey).
 You will hear a tone to confirm the deactivation.
Call Settings
Your phone’s call settings menu lets you configure your voicemail options and a number of other settings
for the phone application.
Phone Calls and Voicemail
30
Any Key Answer
Set to answer incoming calls by pressing any key on your phone.
1. From home, press
> Settings > Device > Call setup > Any key answer.
2. Select On.
Auto Answer
Set your phone to automatically pick up incoming calls. Remember, your phone will answer calls in autoanswer mode even if you are not present.
1. From home, press
> Settings > Device > Call setup > Auto answer.
2. Highlight an option and press

Hands free to answer calls automatically when the phone is connected to an optional
headset or hands-free device.

Speakerphone to answer calls automatically in speakerphone mode.
3. Highlight the time you would like your phone to wait before answering and press
Quick Responses
You can modify the preset text messages to send when you reject an incoming call and send a text
message.
1. From home, press
> Settings > Device > Call setup > Quick responses.
2. Highlight a message and press
3. Edit it and press Save (center softkey).
Tip: To restore the default messages, press Reset (left softkey).
Set Up Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory to make contacting friends and family
easier.
1. From home, press
> Settings > Device > Call setup > Speed dial setup.
2. Highlight an available speed dial location and press Assign (center softkey).
3. Highlight a contact and press
Tip: To replace a current assignment, select a location and press Replace (left softkey).
To remove a number from a speed dial location:
Phone Calls and Voicemail
31
1. From home, press
> Settings > Device > Call setup > Speed dial setup.
2. Highlight the assigned contact you want to remove, press Remove (right softkey), and then Yes
(left softkey).
Voicemail settings
You should set up your voicemail and personal greeting as soon as your phone is activated. See
Voicemail Set Up for setting it up.
1. From home, press
> Settings > Device > Call setup > Voicemail.
2. Configure the following settings:

Setup to configure the voicemail number if necessary.

Ringtone to select the sound to ring for a new voicemail message.

Vibrate to select whether the phone responds with vibration to a new voicemail message.
North American Dialing
Use this option when placing international calls while in the United States or Canada.
1. From home, press
> Settings > Device > Call setup > North American dialing.
2. Select On to enable this feature. See Call Using the Plus (+) Code.
International Dialing
Use this option when placing international calls from outside the United States or Canada. This option
enters the international dialing code automatically.
1. From home, press
> Settings > Device > Call setup > International dialing.
2. Set the international dialing code.
Voice Privacy
This option allows you to enable enhanced privacy mode.
1. From home, press
> Settings > Device > Call setup > Voice privacy.
2. Select On to enable this feature.
DTMF Tones
You can set the length of Dual-tone multi-frequency (DTMF) signal tones.
1. From home, press
> Settings > Device > Call setup > DTMF tones.
2. Select Normal or Long.
Phone Calls and Voicemail
32
Contacts
Your phone’s Contacts help you stay in touch with family, friends, and colleagues by keeping track of all
their contact information. This section explains how to use your phone’s Contacts.
Contacts Cautions
Information saved in Contacts may be lost or changed if the battery is removed for a long period or
left uncharged. Accident or malfunction may also cause loss or change to information. It is
recommended that you keep a separate copy of contacts and other important information. The
company is not responsible for any damages from lost or changed contacts.
Add Contacts
You can add contacts from your phone’s Contacts application. Enter details such as name, phone
numbers, email addresses, mailing addresses, and more.
1. From home, press

> Contacts > Contacts tab > Options (right softkey) > Add new contact.
If prompted, select the location where you want to save the contact, such as Phone or SIM. If
you want to change the location later, select the location name, and select the desired
location.
2. Enter as much information as you want for your new contact, moving through the entry fields by
pressing the navigation key up, down, left or right.

(Contacts icon): Highlight the picture icon and press
contact.

Name

Phone

Email

Address

Add another field: Select to include additional information such as Phonetic name,
Organization, IM, Notes, Nickname, Website, etc.
to assign a picture to the
Note: To select a type (label) for a phone number, email address, or postal address (such as Mobile,
Home, Work, etc.), highlight the PHONE, EMAIL, or ADDRESS field, press Options (right softkey),
select Set type, and then select the appropriate type.
Note: To add more phone numbers, email addresses, etc., select Add new under the current numbers or
addresses.
3. When you have finished adding information, press Save (center softkey).
Contacts
33
 The contact is added.
Save a Phone Number
You can save a phone number to Contacts directly from the phone keypad.
1. From home, enter a phone number.
2. Press Options (right softkey) > Add to contacts.
3. To add the number to an existing entry, select the contact, select a number type for the new
number and then press Save (center softkey).
– or –
To add the number to a new entry, press Options (right softkey) > Add new contact and select
an account to use. Then, enter the name and any additional information and press Save (center
softkey).
 The contact is added.
View Contacts
View a contact’s details by displaying a contact entry.
1. From home, press
> Contacts.
 You will see the Contacts list.
2. Highlight an entry and press
to show the details.
 The contact’s detailed listing appears.
Tip: Highlight any data field, and the available softkey options for that field will be displayed. For example,
Call, Message, etc.
Contacts List
The Contacts list shows the Contacts entries stored in your phone.
●
Favorites tab: Highlight to display your favorite contacts.
●
Contacts tab: Highlight to display all the contacts you save.
●
Groups tab: Highlight to display the contact groups you have created.
●
Search (left softkey): Press to search for a contact.
●
Options (right softkey): Press to access the following menus:

Add new contact to add a new contact. See Add Contacts.

Add new group to add a new group contact. See Add a Group and Group Contacts.
Contacts
34

Contacts to display to select contacts to be displayed on Contacts.

Delete to select contact(s) you want to delete.

Import/export to import or export your contacts from/to the microSD card and phone.

Share visible contacts to share your visible contacts via Messaging, Email or Bluetooth.

Settings to open the display settings screen.
Display Options
1. From home, press
> Contacts > Options (right softkey) > Contacts to display.
2. Select one of the following options:

All contacts to display all the contacts you save.

Phone to display all the contacts saved in your phone.

Customize to select whether to display all the contacts saved in your phone or SIM card and
to select contact types for each account. Highlight Phone or SIM, press Select (center
softkey), make your selection and then press Done (left softkey).
Note: If you use a SIM card in which a contact list can be saved, SIM is also shown as an option.
Edit Contacts
Once you’ve added a contact, you can add or edit any of the information in the entry, assign a caller ID
picture, customize with a unique ringtone, and more.
Add or Change Information for a Contact
1. From home, press
> Contacts > Contacts tab.
2. Highlight the contact you want to edit, press
, and then press Options (right softkey) > Edit.
3. Highlight the information you wish to edit.
4. Add or edit the information.
5. Press Save (center softkey) to save your changes.
Assign a Picture to a Contact
1. From home, press
> Contacts > Contacts tab.
2. Highlight the contact you want to edit, press
, and then press Options (right softkey) > Edit.
3. Highlight the contact icon above the name and press
Contacts
35
4. To assign a new picture, select Take photo and take a picture.
– or –
To assign a stored picture, select Choose photo and select a picture.
5. You may be prompted to size the picture for use with entries. Zoom in or out the square to frame
the portion of the picture to use by pressing Zoom in (right softkey) or Zoom out (left softkey)
and press Done (center softkey).
6. Press Save (center softkey).
Assign a Ringtone to a Contact
Assign a ringtone to a Contacts entry so that you can identify the caller by the ringtone.
1. From home, press
> Contacts > Contacts tab.
2. Highlight the appropriate contact, press
ringtone or Set message ringtone.
3. Highlight a ringtone and press
, and then press Options (right softkey) > Set phone
Assign a Vibration Type to a Contact
You can assign a specific vibrate type to a contact.
1. From home, press
> Contacts > Contacts tab.
2. Highlight the appropriate contact, press
3. Highlight a vibration type and press
, and then press Options (right softkey) > Set vibrate.
Add a Contact to Favorites
1. From home, press
> Contacts > Contacts tab.
2. Highlight the appropriate contact, press
favorites.
3.
, and then press Options (right softkey) > Add to
(Favorite icon) will be displayed on the Contact details title bar.
Delete Contacts
You can delete existing entries from your Contacts.
Note: You cannot delete some contact entries that are pre-programmed in the contacts list.
1. From home, press
Contacts
> Contacts > Contacts tab.
36
2. Press Options (right softkey) > Delete.
3. Highlight the entry you want to delete and press Select (center softkey). A check mark will appear
in the box next to the selected entry. Repeat this step if you want to delete other entries.
– or –
Press Options (right softkey) > Select all to delete all entries.
4. Press Delete (left softkey) > Yes (left softkey).
 The contact is deleted.
Add a Group and Group Contacts
You can create a group by assigning personal Contacts entries as members and then naming the new
group.
1. From home, press
> Contacts > Groups tab.
2. Press Options (right softkey) > Add new group.
3. Select the account in which you want to create a group contact.
4. Enter the group’s name.
5. Highlight Add contact and press
6. Highlight the entry you want to add to the group and press Select (center softkey).

A check mark will appear in the box next to the selected entry.
7. Repeat step 6 to add other members.
8. When you have selected all the entries you want to add, press Done (right softkey), and then
Save (right softkey).
Edit a Group Contact
Manage the group contacts you create.
Add or Remove a Group Contact Entry, or Rename a Group
You can add a group member to an existing group, remove group members from it, or rename a group.
1. From home, press
> Contacts > Groups tab.
2. Highlight the group you want to edit, press
, and then press Options (right softkey) > Edit.
3. The following options are available:
Contacts
37

Highlight Add contact and press
then press Done (right softkey).

Highlight

Highlight the group to rename it.
to add members to the group, choose contact(s), and
button next to the entry you want to remove from the group, and then press
4. Press Save (right softkey) to add or remove group members, or Save (center softkey) to rename
the group.
Delete a Group Contact
You can delete existing entries from your Contacts.
1. From home, press
> Contacts > Groups tab.
2. Highlight the group you want to delete, press
Delete.
, and then press Options (right softkey) >
3. Press Yes (left softkey).
 The group contact is deleted.
Find Contacts Entries
You can quickly access the stored information in your Contacts, or search Contacts entries for the
numbers that contain a specific string of numbers.
Find an Entry from Contacts
1. From home, press
> Contacts > Contacts tab.
2. Scroll through all the entries.
– or –
Press Search (left softkey) and enter the first few letters of any part of an entry’s name. Contacts
with matching letters are listed.

The more letters you enter, the more your search narrows.
3. Highlight an entry and press
to dial the number displayed.
– or –
Highlight an entry and press
to display the contact details screen.
Find an Entry Using the Phone Keypad
1. Enter three or more digits of the number from the Home screen.
Contacts
38

The more numbers you enter, the more specific the search becomes.
2. All Contacts entries matching the entered numbers will be displayed.
3.
Highlight an entry and press
, or press Call (center softkey) to dial the number.
– or –
Highlight an entry and press Options (right softkey) > Contact details to display the contact
details.
ICE (In Case of Emergency) Contacts
Registering ICE information might help rescue workers, such as paramedics and police officers, as well
as hospital personnel identify your primary contact or special medical needs you might have in case of
emergency.
To add an ICE contact:
1. From home, press
> Contacts > Contacts tab.
2. Highlight ICE- In Case of Emergency and press
3. Press Add (left softkey).
4. Highlight the entry you want to register as an ICE contact and press
To remove an ICE contact:
1. From home, press
> Contacts > Contacts tab.
2. Highlight ICE- In Case of Emergency and press
3. Press Remove (right softkey)
4. Highlight an ICE contact, press
, and then press Yes (left softkey).
Personal Information
You can register your own information, medical information, etc.
To enter or edit your personal information:
1. From home, press
> Contacts > Contacts tab.
2. Highlight ICE- In Case of Emergency and press
3. Highlight My emergency information, press
, and then press Edit (left softkey).
4. Enter or edit the necessary information and press Save (center softkey).
Contacts
39
To access your personal information when the phone is locked:
1. From home, press Emergency (left softkey).
2. Highlight My emergency information and press
Share Contacts
You can use saved Contacts information in other applications.
1. From home, press
> Contacts > Contacts tab.
2. Highlight the contact you want to share, press
Share.
, and then press Options (right softkey) >
3. In the Share contact via menu, select a method.
Import Contacts
Your phone offers a couple of options for importing contacts from installed SD memory cards or external
devices via USB.
Before Importing Contacts from an SD Card
You will need to have installed an SD card with previously backed up contacts information into your
phone before you can import contacts. See SD Card for SD card information.
Import Contacts from Phone or an SD Card
1. From home, press
> Contacts > Contacts tab.
2. Press Options (right softkey) > Import/export.
 You will see the Import/export contacts menu.
3. Select Import from Phone or Import from SD card.
4. Select a destination for the imported contacts.
5. Follow the onscreen instructions to complete the import.
 The contacts are imported and stored in the selected account.
Back Up Contacts
You can easily back up your phone’s Contacts data to the SD card.
Before Backing Up Contacts to an SD Card
You will need to have installed an SD card with previously backed up contacts information into your
phone before you can back up your contacts. See SD Card for SD card information.
Contacts
40
Back Up Contacts to Your SD Card
1. From home, press
> Contacts.
2. Press Options (right softkey) > Import/export.
 You will see the Import/export contacts menu.
3. Select Export to SD card.
4. Press Yes (left softkey) to confirm the export.
5. Follow the onscreen instructions to complete the export.
 The contacts are exported and saved to the installed SD card.
Contacts
41
Messaging
With wireless service and your phone’s messaging capabilities, you have the opportunity to share
information through many different channels and accounts, including personal and corporate email, and
text and multimedia messaging.
Text and Multimedia Messaging
With text messaging (SMS), you can send and receive instant text messages between your wireless
phone and another messaging-ready phone.
Multimedia messages, or MMS, can contain text and pictures, recorded voice, audio or video files, picture
slideshows, contact cards (vCard), or appointments (vCalendar).
See your service plan for applicable charges for messaging.
Send a Message
Quickly compose and send text messages on your phone.
1. From home, press
> Messaging.
2. Press New msg. (left softkey).
3. Fill in one or more recipients from the following options:

Press Contacts (right softkey) to select recipients from your Contacts. (Qualifying Contacts
entries must contain a phone number or an email address.) Select the contacts to whom you
want to send the message by pressing Select (center softkey). When you have selected all
the message recipients, press Done (right softkey) to proceed.

You can enter phone numbers or email addresses directly. As you enter email addresses,
any matching addresses from your contacts list are displayed. Highlight a match and press
Select (center softkey) to enter the address.
4. Highlight the Type message field and start composing your message.
5. To add an attachment, press Options (right softkey) > Attach and select from the following file
attachments:

Pictures: Select a stored picture to attach.

Capture picture: Take a picture to attach.

Videos: Select a stored video to attach.

Capture video: Record a video to attach.

Audio: Select an audio file to attach.

Record audio: Record an audio file to attach.
Messaging
42

Contact (vCard): Opens Contacts to select one or more contact entries and attach them.

Event (vCalendar): Select an event entry to attach.
Tip: To remove an attachment, highlight the attachment field, press
, highlight the attachment you
want to remove, and then press Remove (left softkey). To add new attachment, highlight the Add new...
and press
Tip: You can select more options for composing messages, such as Add subject, Add preset message,
Discard or Settings.
6. When you have finished composing the message, press Send (center softkey).
Save and Resume a Draft Message
While composing a text or multimedia message, press Options (right softkey) > Save as draft to save
your message as a draft.
To resume composing the message:
1. From home, press
> Messaging.
2. On the Messaging screen, highlight the draft message you want to resume and press View
(center softkey).
3. Enter the message to resume editing it.
4. When you finish editing the message, press Send (center softkey).
New Messages Notification
Depending on your notification settings, the phone will play a ringtone, vibrate, or display the message
briefly in the status bar when you receive a new text or multimedia message. To change the notification
for new text and multimedia messages, see Text and MMS Options for details.
A new message icon (
) also appears in the notifications area of the status bar to notify you of a new
text or multimedia message.
Manage Message Conversations
Text and multimedia messages that are sent to and received from a contact (or a number) are grouped
into conversations or message threads in the Messaging screen. Text or MMS conversations let you see
exchanged messages (similar to a chat program) with a contact on the screen.
Read a Text Message
■
If you have a new message notification, press OK (center softkey) on the notification screen to
open and read it.
– or –
1. From home, press
Messaging
> Messaging.
43
2. Highlight the message or message thread you want to read, and press
to open it.
Reply to a Message
1. From home, press
> Messaging.
2. Highlight a message or message thread and press
to open it.
3. Enter your reply message and attach files if desired.
Note: If you want to reply only to the sender, highlight the message and press Options (right softkey) >
Reply to sender only.
Delete Conversations
1. From home, press
> Messaging.
2. Press Options (right softkey) > Delete or Delete all threads.
3. When prompted to confirm, press Yes (left softkey).
Delete a Single Message
1. From home, press
> Messaging.
2. Highlight a message you want to delete, press Options (right softkey) > Delete.
3. When prompted to confirm, press Yes (left softkey).
Text and MMS Options
The messages settings menu lets you control options for your text and MMS messages including
message limits, size settings, and notifications.
1. From home, press
> Messaging.
2. Press Options (right softkey) > Settings.
3. Configure the following settings:

Delete old messages: Automatically delete older messages when the set limits are reached.

Attachment storage: Select your desired storage location for attachments.

Preset message: Edit text that you frequently insert when composing messages.

SMS Delivery reports: Select On to check the delivery of a SMS message you sent.

Long message Re-assembly: When you receive a long message, it is divided into up to 15
messages and delivered to your phone. Select On to combine them to display as one
message rather than segmented ones.
Messaging
44

Group messaging: Select On to enable group messages.

Auto-retrieve: Select On to automatically retrieve all your multimedia messages. When
selected, the multimedia message header plus the message body and attachments will
automatically download to your phone.

Roaming auto-retrieve: Select On to automatically retrieve all your messages completely
when roaming. This may incur significant phone charges.

MMS Creation mode: Select this option to restrict the specifications of the file you can send
as an attachment. If you select Restricted, you cannot attach following files;
•
File format is other than jpg, jpeg, gif, wbmp, 3gp, amr, mid, midi, vcf and vcs.
•
File resolution is over 640x480.
•
File size is over 280KB.

Signature: Select On to add a customized signature to each message you send.

Notifications: Configure how to notify you when a new message is received.
•
Notifications: Select On to display the notification screen.
•
Sound: Select a ringtone for new messages.
•
Vibrate: Select Always to vibrate the phone.
Emergency Alerts
Your phone is compatible with federally supervised cell phone alert services which send out broadcast
SMS messages for public warning.
View an Emergency Alert
■
If you have an Emergency Alert notification, press OK (center softkey) on the notification screen
to open and read it.
– or –
1. From home, press
> Messaging.
2. Press Options (right softkey) > Emergency Alerts.
Emergency Alert Settings
1. From home, press
> Messaging.
2. Press Options (right softkey) > Emergency Alerts > Settings (left softkey).
3. Configure the following settings:
●
Receive alerts: Check the box next to the type of Emergency Alert you wish to receive.
Messaging
45

Presidential Alert to deliver a national Presidential Alert. Presidential Alerts is always grayed
out (not selectable) and cannot be excluded.

Extreme Alert to deliver emergency alerts in an extreme emergency situation (an
extraordinary threat to life or property).

Severe Alert to deliver emergency alerts in a severe emergency situation (a significant threat
to life or property).

AMBER Alert to deliver alerts related to missing or endangered children.

Emergency Alerts Test to receive a test message to make sure that the alert messages can
be successfully received.
●
Cellbroadcast message: Select On to receive cellbroadcast message other than Emergency
Alerts.
●
Notification settings: Configure the following notification options.

Notifications: Select On to set your phone to display a notification when an alert is received.

Sound: Select On to set a notification sound to play when an emergency alert is received.

Vibrate: Select On to set your phone to vibrate when an emergency alert is received.

Alert reminder: Set how often your phone alerts you.

Speak alert message: Select On to use the text-to-speech feature on your phone to read the
emergency alert out when it is received.
Email
Use the Email application to send and receive email from your webmail or other accounts, using POP3 or
IMAP, or access your Exchange ActiveSync account for your corporate email needs.
Add Email Accounts
You can add several types of personal email accounts, such as POP3 and IMAP accounts, on your phone.
1. From home, press
> Email, if you have not set up any email accounts yet.
– or –
From home, press
> Settings > Personal > Accounts > Add account > Email.
2. Select a desired account.
3. Enter your email address and password, and then press Next (right softkey).
4. Enter the account details and press Next (right softkey).
5. Configure the account options as necessary and press Next (right softkey).
Messaging
46
6. Follow the onscreen prompts to complete.
Important: If the account type you want to set up is not in the phone database, you will be asked to enter
more details. You should get all pertinent information for the email account, such as incoming and
outgoing server settings, before you proceed.
Add a Corporate Account
If you synchronize your phone with your corporate account, you can read, manage, and send email in the
same easy way as with a POP3/IMAP account. You can also access some powerful Exchange features.
®
®
Note: Before setting up a Microsoft Exchange ActiveSync account, contact your company's Exchange
Server administrator for required sign-in information.
1. From home, press
> Settings > Personal > Accounts > Add account > Corporate.
2. Enter the Exchange email address and password, press
, and then press Next (right softkey).

Email address: Your corporate email address.

Password: Typically your network access password (case-sensitive).
3. Enter the Exchange account details, and then press Next (right softkey).
Note: You may need to contact your Exchange Server administrator for required sign-in information.

Domain\Username: Enter your network login username or network domain.

Password: Typically your network access password (case-sensitive).

Server: Your Exchange server remote email address. Typically it is in the form of
mail.XXX.com.

Port: Modify the port number, if necessary.

Security type: If your network requires SSL encryption, select the SSL/TLS from the
dropdown list and activate this additional level of security. If your Exchange server requires
this feature, leaving this field unconfigured can prevent connection.
4. Configure Sync frequency, Sync emails from, and activate other email settings as necessary,
and then press Next (right softkey).
5. Follow the onscreen prompts to complete.
Note: You can have multiple corporate email (Microsoft Exchange ActiveSync) accounts active on your
phone.
Create and Send Email
Compose and send email using any account you have set up on your phone. Increase your productivity
by attaching files such as pictures, videos, or documents to your email messages.
Messaging
47
Compose a Message
1. From home, press
> Email.
 The email inbox opens.
2. Press New email (left softkey).
 The email composition window opens.
3. Enter the message recipient(s).

You can add multiple recipients to an email message.

As you enter email addresses, any matching addresses from your contacts list are displayed.
Highlight a match and press Select (center softkey) to enter the address directly.

To add recipients from Contacts, press Options (right softkey), highlight Go to Contacts and
press

to select from your contacts list.
If you want to send a carbon copy (CC) or a blind carbon copy (BCC) of the email to other
recipients, press Options (right softkey) > Add Cc/Bcc.
4. Enter the email subject and message.

To add an attachment to the message, press Options (right softkey) > Attach, and choose
an option from Pictures, Take picture, Videos, Record video, Audio, Record audio or
Others.
5. Press Send (center softkey).
 The email message is sent.
Available Options
While composing a message, you can access the following options by pressing Options (right softkey).
●
Save as draft to save the message as a draft.
●
Add preset message to add a preset message.
●
Discard to discard the message.
●
Formatting to add some effects on your mail. Select Fonts, Insert pictures or Email body
background color,.
●
Priority to select a priority from Low, Normal, or High.
●
Sensitivity to select a sensitivity level from Normal, Personal, Private or Confidential.
Messaging
48
Open Email Messages
You can open and read email messages directly from the email inbox. Reading and replying to email on
your phone is as simple as on your computer.
1. From home, press

> Email.
If Inbox is not displayed, press Options (right softkey) > Manage folders > Inbox > View
(center softkey).
 The email inbox opens.
2. Highlight the message you want to view and press
Tip: Press Options (right softkey) > Account to switch to a different email account.
3. To reply the message, press Reply (left softkey)

To reply to all recipients or forward the message, press Options (right softkey) and select:
•
Reply all to reply to all recipients of the message.
•
Forward to forward the message.
4. After composing your message, press Send (center softkey) to send the message.
Options when Reviewing Email Messages
●
Resetting Mail as Unread: With an email message open press Options (right softkey) > Mark
as unread.
●
Deleting Mail: With an email message open, press Options (right softkey) > Delete.
●
Moving the message(s) to other folders: On the email account inbox, press Options (right
softkey) > Move to folder.
●
Searching through the messages: On the email account inbox, press Options (right softkey) >
Search. Enter the keyword to search, and then press Search (center softkey).
Delete Email Accounts
You can delete an email account from your phone if you no longer wish to receive messages for the
account on your phone.
1. From home, press
> Email.
 The email inbox opens.
2. Press Options (right softkey) > Settings.
3. Highlight Account settings and press
4. Press Remove (right softkey).
Messaging
49
5. Highlight the account you want to delete and press Select (center softkey), and then press Done
(left softkey).
6. When prompted to confirm, press Yes (left softkey).
 The account is deleted from your phone.
Manage Your Email Inbox
Your email inbox provides management options for viewing, sorting, and deleting your email messages.
View Your Email Inbox
1. From home, press
> Email.
2. If Inbox is not displayed, press Options (right softkey) > Manage folders.
3. Highlight the folder you want to display and press View (center softkey).
4. Highlight the message you want to view and press View (center softkey).
Refresh an Email Account
Whatever your automatic synchronization settings are, you can also synchronize your sent and received
email messages manually at any time.
■
While viewing the account you want to synchronize, press Options (right softkey) > Refresh.
Delete Email Messages
1. On the email account inbox, press Options (right softkey) > Delete.
2. Highlight the message you want to delete, and press Select (center softkey).

Repeat the step 2 to select additional messages to delete.

To delete all messages, press Options (right softkey) > Select all.
3. Press Done (left softkey).
4. When prompted to confirm, press Yes (left softkey).
Email Settings
1. From home, press
> Email > Options (right softkey) > Settings.
2. Configure the following settings (options vary depending on the type of account):
●
General settings

Messaging
Set default account: If you have more than one email account, specify which is to be used
when the Email app is launched.
50

Auto-advance: Choose which screen to show after you delete a message.

Include original text: Select On to include the text of the original message in your reply.

Default image size: Select the size of the image files to attach to your message. The
following options are available:

●
Normal: The image is compressed to 512 KB or smaller.
•
Large: The image is compressed to 750 KB or smaller.
•
Original: The image remains at the original size.
•
Always ask: You will be asked your desired size when the image size is larger than 512
KB.
Attachment storage: Select where to save attachments.
Advanced settings

●
•
Select mail list display items: Choose how your mail list is displayed.
•
Select display header: Choose to display email by Subject or by Sender.
•
Select display items: Choose which header items to include in the display.

Clear email address history: Select to clear all email addresses of sent emails in the
prediction list.

Clear picture approvals: Select to stop displaying inline images from senders you previously
allowed.

Exchange errors log: Select On to save the Exchange ActiveSync error logs.

Confirm before sending: Select On to display a confirmation message before sending a
message.
Account settings

Messaging
Highlight the account you want to configure and press
51
Internet
The following topics describe how to connect to and use the Internet on your phone.
Data Services General Information (4G LTE and
3G Networks)
The following topics will help you learn the basics of using your data services, including managing your
user name, launching a data connection, and navigating the Web with your phone.
4G LTE
The 4G LTE network provides your phone with wireless Internet access over greater distances than Wi-Fi
and delivers data transfer rates of up to 60 Mbps. To connect your phone to the 4G LTE network, you
must be in an area covered by the 4G LTE network.
Note: The availability and range of the network depends on a number of factors including your distance to
the base station, and infrastructure and other objects through which the signal passes.
Set Your Network Options
1. From home, press
Network mode.
> Settings > Wireless & networks > More > Cellular networks >
2. Select from LTE/CDMA, CDMA, UMTS or Automatic.
 The phone will scan for the best available network and will automatically connect to it.
When your phone is connected via 4G LTE, LTE appears above the signal strength indicator in the status
bar (
).
Your User Name
When you buy your phone and sign up for service, you’re automatically assigned a user name.
When you use data services, your user name is submitted to identify you to the network. Your user name
is automatically programmed into your phone. You don’t have to enter it.
Update Your User Name
If you choose to change your user name and select a new one online, or make any changes to your
services, you must then update the profile on your phone.
1. From home, press
> Settings > System > System updates.
2. Select Update profile.
 Your phone will download and install the profile update.
Internet
52
Data Connection Status and Indicators
Your phone displays the current status of your data connection through indicators at the top of the screen.
The following symbols are used:
Icon
Status
Network (full signal): The fullness of the triangle icon indicates the strength of the
signal. A fuller icon means a better signal.
LTE data service: Your phone is connected to a LTE network.
4G data service: Your phone is connected to a 4G data network.
3G data service: Your phone is connected to a 3G data network.
Wi-Fi connection: Your phone is connected to a Wi-Fi network for data.
Internet Browser
Your phone’s Internet app Web browser gives you full access to both mobile and traditional websites on
the go, using 3G, 4G, or Wi-Fi data connections.
Use the Internet Browser
Launching the Internet browser is as easy as pressing a softkey.
■
From home, press Browser (right softkey).
– or –
> Browser.
 The Internet browser opens.
Learn to Navigate the Web
Navigating through menus and websites during a data session is easy once you’ve learned a few basics.
Softkeys
During a data session, the bottom line of your phone’s display screen contains one or more softkeys.
These keys are shortcut controls for navigating around the Web, and they correspond to the softkeys
directly below the phone’s display screen.
Tip: Depending on which websites you visit, the labels on the softkeys may change to indicate their
function.
Internet
53
To use softkeys:
■
Press a softkey. (If an additional pop-up menu is displayed when you press the softkey, select the
menu items using your keypad [if they’re numbered], or by highlighting the option and pressing
.)
Scrolling
As with other parts of your phone’s menu, you’ll have to scroll up and down to see everything on some
websites.
To scroll line by line through websites:
■
Press the navigation key up or down.
Selecting
To select onscreen items:
■
Use the navigation key to highlight an item and press
Links, which are displayed as underlined text, allow you to jump to Web pages, select special functions,
or even place phone calls.
To select links:
■
Highlight the link and press the appropriate softkey.
Go Back
To go back one page:
■
Press
on your phone.
Tip: You can also use
for deleting text (like a BACKSPACE key) when you are entering text.
Keypad shortcut
Each key on the keypad can be used as a shortcut.
●
: Zoom out
●
: Page up
●
: Zoom in
●
: Scroll page left
●
: Overview screen
●
: Scroll page right
Internet
54
●
: Previous tab
●
: Page down
●
: Next tab
●
: Bookmarks
●
: Search/Enter URL
●
: Page operation
Browser Menu
The browser menu offers additional options to expand your use of the Web on your phone.
Open the Browser Options:
■
From any open Web page, press Options (right softkey).
Options available within the browser menu may include:
●
Refresh to reload the current Web page.
●
Bookmarks to access and manage your bookmarks.
●
Homepage to return to the home page.
●
Search/Enter URL to launch a Web search or open a specific page by entering a URL.
●
Save to bookmarks to add the currently viewed page to bookmarks.
●
Zoom in to zoom in on a Web page.
●
Zoom out to zoom out on a Web page.
●
Overview screen to display the entire Web page.
●
Page operation:

Send to send the URL to Email, Notepad, Bluetooth, Messaging, etc.

Save for offline reading to save the Web page so you can read it later when offline.

Find on page to search in the current page.

Request desktop site to assign the browser to display the current page in the desktop view
(to closely mimic the display as it would appear on a Desktop computer).

Page info to display information about the currently viewed page.
●
Forward to return to a previously viewed page.
●
Other:
Internet
55
•
History to display a list of the Web pages visited.
•
Saved pages to display a list of saved Web pages.
•
Downloads to display a list of downloaded data.
•
Settings to modify your Web settings. For more information, see Adjust Browser Settings.
●
Keypad shortcut to view the Keypad shortcut list.
●
Exit to close the browser.
Adjust Browser Settings:
■
From any open Web page, press Options (right softkey) > Other > Settings.
You can access the following settings menus:
●
●
●
Internet
General

Set homepage to set the home page for the Web browser.

Font size to set the font size for the Web browser.

Pointer to set the speed of the pointer for the Web browser

Storage to select your desired storage location.
Privacy & security

Clear cache to delete all currently cached data.

Clear history to clear the browser navigation history.

Show security warnings to notify you if there is a security Question with the current website.

Accept cookies to allow sites that require cookies to save and read cookies from your phone.

Clear all cookie data to clear all current browser cookie files.

Enable location to allow sites to request access to your current location (using the built-in
GPS function).

Clear location access to clear location access for all websites.
Advanced

Set search engine to choose which search engine to use as default.

Captions to turn on closed captioning for your phone and configure its settings. For the
browser, the following options are not available: Language, Caption window color, Caption
window opacity, and Display.

Open in background to launch new pages in a separate page and display behind the
current one.
56
●

Enable JavaScript to enable JavaScript for the current Web page. Without this feature,
some pages may not display properly.

Allow multiple tabs per app to use multiple navigation tabs per application.

Enable plug-ins to determine the way your phone handles program enhancements.

Website settings to manage advanced settings for individual websites.

Open pages in overview to change the default view to overview mode.

Block pop-ups to prevent pop-up advertisements or windows from appearing onscreen.

Text encoding to select the text encoding format.

Reset to default to reset the browser settings to default.
Bandwidth management

Internet
Load images to display images on Web pages.
57
Connectivity
The following topics address your phone’s connectivity options, including Wi-Fi, Bluetooth, USB file
transfer, tethering, and more.
Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 300 feet. To use your phone’s Wi-Fi, you
need access to a wireless access point or “hotspot.”
The availability and range of the Wi-Fi signal depends on a number of factors, including infrastructure and
other objects through which the signal passes.
Turn Wi-Fi On and Connect to a Wireless Network
Use the wireless and networks setting menu to enable your phone’s Wi-Fi radio and connect to an
available Wi-Fi network.
1. From home, press
> Settings > Wireless & networks > Wi-Fi.
2. Press Turn on (left softkey) to turn Wi-Fi on.
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.

To disable Wi-Fi, press Turn off (left softkey).
3. Highlight a Wi-Fi network you want to connect and press
> Connect to network. If you
selected an open network, you will be automatically connected to the network. If you selected a
network that is secured with a password, enter the password and then press Save (center
softkey).

The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For password
for a public wireless LAN, check with user's service provider.

When your phone is connected to a wireless network, the Wi-Fi icon (
status bar and tells you the approximate signal strength.

If Network notification in Advanced Wi-Fi settings is enabled, the open network icon (
appears in the status bar whenever the phone detects an available open wireless network
within range.
) appears in the
Note: The next time your phone connects to a previously accessed secured wireless network, you will not
be prompted to enter the password again, unless you reset your phone to its factory default settings or
you instruct the phone to forget the network.
Connectivity
58
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your phone
to connect to a Wi-Fi network. It may be necessary to provide a user name and password for certain
closed wireless networks.
Wi-Fi Settings
Use the Wi-Fi settings menu to manually set your Wi-Fi connection options.
1. From home, press
> Settings > Wireless & networks > Wi-Fi.
2. If necessary, press Turn on (left softkey) to turn Wi-Fi on.
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.

To disable Wi-Fi, press Turn off (left softkey).
3. Press Options (right softkey) for the following menus:

Add network to add a new Wi-Fi network.

Saved networks to display your saved wireless networks.

Refresh to reload the list of networks.

Advanced to configure advanced Wi-Fi settings.
Disconnect Wi-Fi
You may wish to disconnect from a connected Wi-Fi network without turning Wi-Fi off.
1. From home, press
> Settings > Wireless & networks > Wi-Fi.
2. Highlight the name of the connected access point and press
> Forget network.
 Wi-Fi is disconnected.

After disconnecting from an access point, you may need to re-enter the password to
reconnect.
Bluetooth
®
Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number
of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled handhelds,
computers, printers, and wireless phones. The Bluetooth communication range is usually approximately
30 feet.
Bluetooth Function Cautions
Information may not appear correctly on connected devices depending on the transferred data.
Connectivity
59
Bluetooth Information
Bluetooth is a technology that enables wireless connection with PCs, Bluetooth devices with hands-free
features, etc.
Function
Description
Audio output
Listen to music, etc., wirelessly.
Hands-free calls
Call hands-free, using Bluetooth-capable hands-free devices and headsets.
Data exchange
Exchange data with Bluetooth devices.
Enable the Bluetooth Feature
Use the settings menu to enable or disable your phone’s Bluetooth capabilities.
®
●
Wireless connection to all Bluetooth functions is not guaranteed for the phone.
●
The phone may not connect properly depending on the other device.
●
Noise may be experienced with wireless calls and hands-free calls depending on the conditions.
To enable Bluetooth
1. From home, press
> Settings > Wireless & networks > Bluetooth.
2. Press Turn on (left softkey) to enable Bluetooth.

Press Turn off (left softkey) to disable Bluetooth.
Note: Turn off Bluetooth when not in use to conserve battery power, or in places where using a wireless
device is prohibited, such as aboard an aircraft and in hospitals.
Supported Bluetooth Profiles
You can use different profiles for specific Bluetooth functions. Following Bluetooth profiles are supported:
●
A2DP: Advanced Audio Distribution Profile
●
AVRCP: Audio Video Remote Control Profile
●
HFP: Hand-free Profile
●
HSP: Headset Profile
●
OPP: Object Push Profile
●
PBAP: Phone Book Access Profile
Connectivity
60
Bluetooth Settings Menu
1. From home, press
> Settings > Wireless & networks > Bluetooth.
2. Press Turn on (left softkey) to search for other visible in-range Bluetooth devices.
3. Press Options (right softkey) and choose from the following options:
•
Refresh to update the Available devices list.
•
Visibility to set the length of time your device remains visible.
•
Rename my device to rename your phone for Bluetooth access.
•
Selected device settings to access the options for the highlighted item. The available
menus are Rename, Use for, and Forget.
Pair Bluetooth Devices
®
Search for and pair nearby Bluetooth devices. Registered Bluetooth devices can be connected simply.
■
Enable the Bluetooth function on the Bluetooth devices being paired beforehand.
To pair Bluetooth devices:
1. From home, press
> Settings > Wireless & networks >Bluetooth.
2. Highlight the device you want to pair with and press

If you don’t see your device listed, press Options (right softkey) and select Refresh. Your
phone will start to scan for Bluetooth devices within range.
3. If prompted, enter the PIN code (passkey) and press
4. Press Pair (left softkey).
 The Bluetooth device is paired to your phone.

Methods to accept a Bluetooth connection differ depending on the devices used.
Send Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-enabled device
such as a phone or notebook computer.
Types of Data You Can Send via Bluetooth
You can send the following types of information, depending on the device you are sending to:
●
Images and videos
●
Calendar events
Connectivity
61
●
Contacts
●
Audio files
In the instructions below, Contacts data is being used as an example.
Sending Contacts Data via Bluetooth
1. From home, press
> Contacts > Contacts tab.
2. Highlight the contact you want to share, press
Share > Bluetooth.
, and then press Options (right softkey) >
3. In the next few steps, you will be asked to turn Bluetooth on and connect to the receiving
Bluetooth device so the files can be sent. For more information, see Bluetooth.
Receive Information via Bluetooth
Your phone is capable of receiving a wide variety of file types with Bluetooth, including pictures, music
tracks, and documents such as PDFs.
1. When another device attempts to send a file to your phone via Bluetooth, you will see a
notification.
2. Press Notifications (left softkey) to see the notification.
3. Highlight the notification of Received files and press
4. Press Accept (left softkey).
 The file is sent to your phone.
Hotspot
Hotspot allows you to turn your phone into a Wi-Fi hotspot. When this feature is turned on, you can share
your phone's mobile data services via Wi-Fi with other Wi-Fi enabled devices. The feature works best
when used in conjunction with 4G data services (although 3G service can also be used).
Important: Use of the Hotspot feature requires an additional subscription.
Note: Turning Hotspot on will disable your phone's connection to other Wi-Fi networks.
Set Up Hotspot
1. From home, press
> Settings > Wireless & networks > More > Tethering & Mobile
Hotspot > Mobile Hotspot.
2. Select On to turn Mobile Hotspot on.

If your phone's mobile data access is not enabled, you will be prompted to turn it on. Follow
the onscreen instructions.
Connectivity
62
3. Press Info (left softkey) to confirm your SSID (Service Set Identifier) and password (passkey).
Important: Write down the password (passkey) for this communication.
Connect to Hotspot
1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select your phone hotspot from the network list.

The default name for your phone hotspot is Dura TR. You can change the name by pressing
Mobile Hotpot Settings > Network name from the Hotspot screen.
3. Select this phone and follow your onscreen instructions to enter the passkey (provided on the
Hotspot page).
 The device is connected via your phone’s Hotspot.
4. Launch your Web browser to confirm you have an Internet connection.
Note: To configure your hotspot settings, see Mobile Hotspot Settings for details.
Tethering
Use Tethering to share your device’s Internet connection with a computer that connects to your device via
USB cable or by Bluetooth.
USB Tethering
1. Connect a computer to your phone using the supplied USB cable.
2. From home, press
> Settings > Wireless & networks > More > Tethering & Mobile
Hotspot > USB tethering.
3. Select On to turn USB tethering on.
4. Follow the onscreen instructions.
Bluetooth Tethering
1. From home, press
> Settings > Wireless & networks > More > Tethering & Mobile
Hotspot > Bluetooth tethering.
2. Select On to turn Bluetooth tethering on.
3. Pair your phone with a Bluetooth device. If they are already paired, establish their connection.
See Pair Bluetooth Devices for details.
Transfer Files between Your Phone and a Computer
You can use the supplied USB cable to connect your phone directly to your computer and transfer music,
pictures, and other content files.
Connectivity
63
For example, if you have a music album stored on your computer that you want to listen to on your phone
with any of the music apps, just attach your phone to the computer and copy the files to the music folder.
File Transfer Tips
●
If you want to save data to an SD card on your phone, make sure the SD card is installed and
active. See SD Card.
●
Avoid removing the battery or SD card while transferring data.
Transfer Files between the Phone and a Computer
1. Connect your phone to your computer using the supplied USB/charging cable.

Insert the smaller end of the cable to the USB port at the left side of the phone.

Insert the USB end of the cable into an available USB port on your computer. You may need
to remove the USB cable from the charging head to access it.
2. From home, press
> Settings > Device > Connectivity > USB connection type.
- or Press Notifications (left softkey) > Connected as a media device, Charge only, or USB
tethering.
3. Select Media device (MTP) .
 The files on your phone can now be accessed via your computer.
4. On your computer, navigate to the detected device (such as through the My Computer menu) and
open it.
5. If available, select a drive (SD Card for SD card, Internal storage for internal phone storage).
6. Select a folder (for example, Music for songs and albums) and copy files to it from your computer.
7. When you are done, disconnect your phone from your computer.
 The transferred files are now saved to your phone or SD card.
Connectivity
64
Apps and Entertainment
The following set of topics will explore the features that make your phone so much more than a phone,
from the camera and productivity apps to music, and more.
Connectivity
65
Camera and Video
You can use the camera or video camera to take and share pictures and videos. Your phone comes with
a 5.0 megapixel camera with an autofocus feature that lets you capture sharp pictures and videos.
Take Pictures and Record Videos
The following topics teach you how to take pictures and record videos with your phone’s camera.
Capturing Pictures/Videos
●
File Format for Pictures: File format for pictures is JPEG.
●
File Format for Videos: File format for videos is MPEG4.
Camera Cautions
If Lens Becomes Dirty: Fingerprints or smudges on lens prevent capturing of clear pictures and
videos. Wipe lens with a soft cloth before using.
Avoid Exposure to Direct Sunlight: Be careful not to expose lens to direct sunlight for long periods.
May discolor color filter and affect color of images.
Flash Warning
Do not shine the flash close to eyes. Do not look directly at the flash when shining. Do not shine the
flash at other people's eyes.
Take a Picture
You can take pictures using your phone’s camera.
Note: If you have an SD card installed, you can select SD card or your phone's memory to store your
pictures (see Camera Settings). If no card is installed, pictures and videos are saved to your phone’s
memory.
Activate Camera or Video Mode
■
From home, press
> Camera > Camera or Video.
 The camera vewfinder appears.
Deactivate the Camera or Video Mode
■
On the Camera screen, press
or
Take a Picture
1. From home, press
Camera and Video
> Camera > Camera.
66
 The camera viewfinder appears.
2. Using the phone’s screen as a viewfinder, aim the camera lens at your subject.
3. Press Take (center softkey) to take a picture.
 The picture is captured and saved to your phone or SD card.
Record Videos
Record videos using your phone’s video camera.
Note: If you have an SD card installed, you can select SD card or your phone's memory to store your
pictures (see Camera Settings). If no card is installed, pictures and videos are saved to your phone’s
memory.
1. From home, press
> Camera > Video.
 The camera viewfinder appears.
2. Using the phone’s screen as a viewfinder, aim the camera lens at your subject.
3. Press Record (center softkey) to start recording a video.
 Video recording begins.
4. Press Stop (center softkey) to stop recording.
 The camera stops recording and the video is captured and saved to your phone or SD
card.
View Pictures and Videos
You can access and view all your stored pictures and videos from your phone’s Gallery.
1. From home, press
> Gallery.
– or –
From the picture mode or video mode, press Gallery (left softkey).
 A thumbnail list will be displayed.
2. Highlight a picture or a video you want to display and press View (center softkey) .

To play a video, press Play (center softkey) and Pause (center softkey) to pause the video.
Press the navigation key left to rewind or right to forward the video.
3. Press Options (right softkey) to access the following options:

Send to send the currently displayed image by Email, Bluetooth or Messaging. See Send
Pictures or Videos.
Camera and Video
67

Set as to set the currently displayed picture as a contact photo or wallpaper. (only available
for pictures.) See Assign Pictures.

Delete to delete the currently displayed image. Confirm the deletion by pressing Yes (left
softkey).

Crop to crop the currently displayed picture. See Crop a Picture. (only available for pictures.)

Details to display its details such as the file name, file size, date, etc.

Captions to edit the selected video’s caption. (only available for videos.)
Pictures and Videos: Options while Viewing
●
Display Guide about Keypad shortcut: Press Guide (left softkey).
●
Zoom In or Out on a Picture: Press
●
Rotate the image: Press
to rotate left or
to rotate right on a picture or video. Press
to see a video in portrait mode (only available for videos).
to zoom in or
to zoom out on a picture.
Crop a Picture
1. From home, press
> Gallery.
– or –
From the picture mode or video mode, press Gallery (left softkey).
 A thumbnail list will be displayed.
2. Highlight the picture you want to crop and press View (center softkey) .
3. Press Options(right softkey) > Crop.
 A crop box appears on the picture.
4. Press Zoom in (right softkey) to zoom in or Zoom out (left softkey) to zoom out on the picture.
5. Press Done to apply the changes to the picture.
 The cropped picture is saved in the album as a copy. The original picture remains
unedited.
Assign Pictures
Assign a picture as wallpaper or as contact photo.
1. Take a picture. See steps 1- 4 on Take a Picture.
2. With the picture displayed, press Options (right softkey) > Set as, and select an option.
Camera and Video
68

Contact photo to assign the picture to a Contacts entry. You can size the picture by using
the Zoom in (right softkey) or Zoom out (left softkey).

Wallpaper to assign the picture as wallpaper.
Send Pictures and Videos
Once you have taken a picture or a video, you can use the Bluetooth, email, or messaging capabilities of
your phone to instantly share it with family and friends.
Send Pictures or Videos by Email
You can send several pictures, videos, or both in an email message. They are added as file attachments
in your email.
1. From home, press
> Gallery.
 A thumbnail list will be displayed.
2. Highlight the picture or video you want to send.
3. Press Options (right softkey) > Send.

Select one to select a picture or a video.

Select multiple to select multiple pictures or videos.
4. To select multiple pictures or videos, highlight the picture you want to send and press Select
(center softkey). A check mark will appear in the box on the selected picture or video. Repeat this
step to select all pictures you want to send, and press Send (left softkey).
5. Select Email.
6. Fill in one or more recipients and compose your message.
7. Press Send (center softkey).
Note: If you have multiple email accounts, the default email account will be used.
For more information about using email, see Create and Send Email.
Send a Picture or Video by Multimedia Message
Multimedia Messaging (MMS) lets you send pictures and videos using your phone’s messaging app.
Although you can send several pictures or videos in a multimedia message, it may be better to just send
one at a time, especially if the files are large in size.
1. From home, press
> Gallery.
– or –
From the picture mode or video mode, press Gallery (left softkey).
Camera and Video
69
 A thumbnail list will be displayed.
2. Highlight the picture or video you want to send.
3. Press Options (right softkey) > Send.
4. To select multiple pictures or videos, highlight the picture you want to send and press Select
(center softkey). A check mark will appear in the box on the selected picture or video. Repeat this
step to select all pictures you want to send, and press Send (left softkey).
5. Select Messaging.
6. Fill in one or more recipients and compose your message.
7. Press Send (center softkey).
For more information about sending multimedia messages, see Send a Message.
Send Pictures or Videos Using Bluetooth
You can send pictures and videos to someone’s phone or your computer using Bluetooth.
1. From home, press Menu(right softkey) > Gallery.
– or –
From the picture mode or video mode, press Gallery (left softkey).
 A thumbnail list will be displayed.
2. Highlight the picture or video you want to send.
3. Press Options (right softkey) > Send.
4. To select multiple pictures or videos, highlight the picture you want to send and press Select
(center softkey). A check mark will appear in the box on the selected picture or video. Repeat this
step to select all pictures you want to send, and press Send (left softkey).
5. Select Bluetooth.
6. In the next few steps, you will be asked to turn Bluetooth on and connect to the receiving
Bluetooth device so the files can be sent.
For more information, see Bluetooth.
Camera Settings
You can adjust your camera’s settings using the keypad.
1. From home, press
> Camera > Camera or Video.
 The camera viewfinder appears.
2. Select your desired settings using
Camera and Video
70


Camera settings
•
Press
to choose the resolution for pictures. Select from 5M (2592 x 1944), 1.2M
(1280 x 960), or 0.1M (320 x 240).
•
Press
to choose where to save your pictures. Select Phone or SD card (Only
available when you have inserted a microSD card into your phone).
•
Press
to choose a flash setting. Select from Off, On always, or Auto.
Video settings
•
Press
to choose the default size for videos. Select from 720p (1280x720), VGA
(640x480), or QVGA (320x240).
•
Press
to choose where to save your videos. Select from SD card or Phone.
•
Press
to turn the light on or off while recording a video.
Camera and Video
71
Productivity
Use your phone to stay ahead of the game with calendar, alarm, sound recorder, and more.
Calendar
Use Calendar to create and manage events, meetings, and appointments. Your Calendar helps organize
your time and reminds you of important events.
Add an Event to the Calendar
Add events to your calendar directly from the Calendar.
1. From home, press
> Calendar.
 The Calendar opens.
2. On any Calendar view, press New event (left softkey) > Event.
3. Enter the event name.
4. Enter the event location.
5. Specify the date and time of the event:

If there is a time frame for the event, select the FROM and TO dates and times to set them.

If the event is a special occasion such as a birthday or an all-day event, set the FROM and
TO dates, and then select the ALL DAY check box.

To change the time zone, select the time zone field and select an option from the displayed
list or type a country name.
6. Add the event descriptions.
7. If you have multiple calendars, select a calendar to add the event to.
Note: If you have synchronized your phone with an Exchange ActiveSync account or Outlook on your
computer, you can also select these calendars.
8. Select a color for the event (not available for Exchange ActiveSync accounts).
9. If the event occurs on a regular basis, select the REPETITION field and set the frequency.
10. Set the event reminder time.

To change the reminder time, select the REMINDERS field, select Change period, and
choose from the options.

To delete a reminder time, select the REMINDERS field, select Delete.
Productivity
72

To add another reminder, select Add reminder and a new REMINDERS field will appear.
Select it, select Change period, and choose from the options.
11. Select your status to be displayed on your calendar.
12. Set the privacy status of this event.
13. Select Save (center softkey).
 The event is added to your calendar.
Tip: To change the calendar display views, press Options (right softkey) > View mode, and then select
from Day, Week, Month, Agenda, or Task.
Tip: On the daily and weekly view, press the navigation key left or right to display the previous day/week
or the next day/week, respectively. On the monthly view, press the navigation key up or down to display
the previous month or the next month, respectively.
Add a Task
Note: The task feature is available for Exchange ActiveSync accounts only.
1. From home, press
> Calendar.
2. On any Calendar view, press New event (left softkey) > Task.
3. Enter the title of the task.
4. Enter the description.
5. If you have multiple calendars, select a calendar to add the task to.
6. Set the due date of the task.

If the task has no due date, highlight No due date and press Check (center softkey).
7. If the task occurs on a regular basis, select the REPETITION field and set the frequency.

If you want to set the repetition end date, scroll down to highlight Forever and press
Select Until a date and then set a date to be the last day on which the task occurs.
8. Set the date and time to remind the task.

If you do not want to receive a reminder, highlight No reminder and press Check (center
softkey).
9. Set the priority of the task.
10. Select Save (center softkey).
Invite Guests to Your Calendar Event
Note: The invite guests feature is available for Exchange ActiveSync accounts only.
Productivity
73
You can invite guests to your event and an email invitation will be sent to them. If the people to whom you
send invitations use an Exchange account, they’ll receive an invitation in Calendar and by email.
1. From home, press
> Calendar and create a new event. See Add an Event to the Calendar.
2. Add details about the event such as date and time, location, and more.
3. Select the GUESTS field and enter the email addresses of everyone you want to invite to the
event. The following options are available.

Select Go to Contacts and choose from your contacts list.

Enter the address directly.
Note: When inviting a guest to an event created in an Exchange account, you can display the schedule of
the guest by selecting Check the schedule of guests below the GUESTS field.
4. Select Save (center softkey) to add the event to your Exchange Calendar.
Calendar Event Alerts
When your phone is turned on and you have an event alarm scheduled, your phone alerts you. There are
several ways your phone alerts you to scheduled events:
●
By playing the assigned ringtone or vibration type.
●
By showing the event icon
●
By showing the notification screen.
on the status bar.
Event Reminders
If you have set at least one reminder for an event, the upcoming event icon
notifications area of the status bar to remind you of the upcoming event.
will appear in the
To set reminder settings:
■
On any Calendar view, press Options (right softkey) > Settings > General settings >
Notifications.
To view, dismiss, or snooze the reminder:
Tip: You can display the Notifications screen whenever you want to, by pressing Notifications (left
softkey) from the Home screen.
■
Select the event name on the notification screen for the following options.

Press Details (left softkey) to display event details.

Press Dismiss (right softkey) to dismiss the reminder.

Press OK (center softkey) to display the Calendar notification screen.
Productivity
74

•
Press Dismiss (left softkey) to dismiss the reminder.
•
Press Options (right softkey) and select Snooze to postpone the event reminder for the
set duration, or select Set snooze duration to set snooze interval.
•
Press Select (center softkey) to access the edit screen of the event. See Edit Calendar
Events.
Press
to keep the reminder pending on the Notifications screen.
View Calendar Events
You can display the Calendar in daily, weekly, monthly, or agenda view. To change the Calendar view,
press Options (right softkey) > View mode, and then select from Day, Week, Month, Agenda, or Task.
The color of the events indicates the type of calendar that includes the event. To find out what each color
represents, press Options (right softkey) > Calendars to display.
●
●
●
Day: Day view displays a list of the events of one day.

Highlight an event to view its details and press

Press the navigation key left or right to view previous day or next day.
Week: Week view displays a chart of the events of one week.

The current day will appear highlighted.

Highlight an event to view its details and press

Press the navigation key left or right to view earlier or later weeks.
Month: Month view displays markers on days that have events.

The current day will appear highlighted.

Highlight a day to view the events of that day and press

Press the navigation key up or down to view earlier or later months.
●
Agenda: Agenda view shows a list of all your events in chronological order.
●
Task: Task view shows a list of all your tasks in chronological order.
Edit Calendar Events
You can edit calendar events.
1. From home, press
> Calendar.
2. Open the calendar event details:
Productivity
75

In Agenda, Day, and Week views, highlight the calendar event you want to edit and press

In Month view, highlight the date where the calendar event occurs and press
press
, and then
3. The following options are available. If the event is repeating, a pop up appears asking which
event(s) you want to edit or delete:

Edit (left softkey) to edit the event.

Options (right softkey) for the following options:
•
Delete > Yes (left softkey) to delete the event.
•
Send to share the event.
Calendar Options
1. From home, press
> Calendar.
2. On any Calendar view, press Options (right softkey).
3. The following options are available:

Go to to access to date you want. Select from Today or Date.

View mode to select the calendar view. Select from Day, Week, Month, Agenda, or Task.

Search event to search calendar items.

Refresh to update the calendar data.

Calendars to display to choose which calendars you want to display.

Settings to access to calendar settings menu.
Calculator
Your phone’s convenient built-in calculator lets you perform basic mathematical equations.
1. From home, press
> Calculators > Calculator.
2. Enter numbers using your keypad.

Press the appropriate Navigation key for an arithmetic option (

Press
to enter a decimal point.

Press
to change the sign for a number to a negative.
Productivity
).
76

Press AC (left softkey) or

Press
to clear all numbers.
for the total.
Tip Calculator
This feature allows you to calculate tip and split the bill.
1. From home, press
> Calculators > Tip Calculator.
2. Fill in the following fields:

Bill: Enter the total bill.

Tip: Enter the tip amount (in percent) you would like to leave.

Split: Enter the number of people paying.
Tip: Press
to enter a decimal point.
3. After you enter numbers in the fields, the Tip Calculator automatically displays the Tip, Total, and
Each.
Unit Converter
The Unit Converter allows you to convert a number of measurement units.
1. From home, press
> Calculators > Unit Converter.
2. Select the conversion feature you wish to use (Temperature, Length, Weight, Area, or Volume).
3. Highlight the From field and press the navigation key left or right to choose the unit to convert
from.
4. Highlight the quantity field and then enter the quantity.
Tip: Press
to enter a decimal point and
to change the sign for a number to a negative.
5. Highlight the To field and press the navigation key left or right to choose the unit to convert to.
6. The Unit Converter automatically displays the converted values below the To field.
Tip: You can also change the conversion unit by pressing the navigation key left or right.
Sound Recorder
The Sound Recorder allows you to record a sound and save it as a voice data on your phone. Recording
time will vary based on the available memory within the phone. You can record audio for up to 12 minutes
per each recording, and for up to 99 hours, 59 minutes, and 59 seconds as total recording time, or up to
4GB when selecting High quality for Recording file format.
Productivity
77
Sound Recorder Settings
1. From home, press
> Tools > Sound Recorder.
2. Press Options (right softkey).
3. Configure the following settings:

File format: Select the file format between Normal and High quality.

Auto save to: Select the destination to save recorded data from Phone and SD card (Only
available when you have an SD card installed).
Record a Sound File
1. From home, press
> Tools > Sound Recorder > Record.
2. Press Record (center softkey) to start recording.
3. Press Pause (left softkey) to pause, and Resume (left softkey) to resume recording
4. To stop recording, press Stop (center softkey).
Play Sound File
1. From home, press
> Tools > Sound Recorder > List.
2. Highlight the sound file you want to play and press Play (center softkey).
Sound File List Options
Your phone offers several options for managing Sound Recorders you have recorded.
1. From home, press
> Tools > Sound Recorder > List.
2. Highlight a sound file and press Options (right softkey) to display available Sound Recorder
options:

Send to send the file by Bluetooth, Email, or Messaging.

Edit title to edit the title of the file.

Sort by to sort the found files by Date or Name.

Go to SD card/Go to Phone to switch between files stored on the SD card and files stored
on the phone.

Details to display information about a file.
Productivity
78
Music Player
Your phone’s built-in music player app lets you listen to and organize music files you have loaded into
your phone’s memory or microSD card.
Tip: For information about loading music onto your phone, see Transfer Files between Your Phone and a
Computer.
Access the Music Player App
1. From home, press
> Tools > Music player.
2. You will find the following menus:

Now playing: Displays the Playback screen which shows you the music currently playing (if
available).

All songs: Displays all your music files in alphabetical order.

Playlists: Displays your playlists. See Use Playlists.

Artists, Albums, or Genres: Displays your music sorted by each category.

Shuffle all: Plays the music on your phone in shuffle mode.
3. Select All songs, Artists, Albums, or Genres, highlight an item, and then press Options (right
softkey). Available menus may vary:

Add to playlist to add the item to a playlist. See Use Playlists.

Delete to delete the item.

Details to display the information about the item.
Play Music
1. On the Music player app, browse for the item you want to play.
2. If the music is in All songs, Playlists, Artists, Albums, or Genres, highlight an item and press
Play (center softkey).
3. When the music starts to play on the Playback screen, the following control options are available:

Press the Volume button up or down to adjust the volume level.

Press Pause (center softkey) to pause. Press Play (center softkey) to resume playing.

By pressing the navigation key left, you can do any of the following:
Productivity
•
Press once to go back to the start of the current item.
•
Press twice to jump back to the start of the previous item.
•
Long press to rewind the current item.
79

By pressing the navigation key right, you can do any of the following:
•
Press to jump to the start of the next item.
•
Long press to fast-forward the current item.

Press Minimize (left softkey) to move the Playback screen to the background. To restore the
Playback screen, press Notifications (left softkey) From home, and then select Now playing.

Press Options (right softkey) for additional options. You may do any of the following:
•
Exit to return to the previous screen.
•
Repeat to access the repeat options. Select from Repeat all, Repeat one, or Off.
•
Shuffle to turn the shuffle mode on or off.
•
Equalizer to use the equalizer. Make your desired selection.
•
Details to display information about the music file.
Use Playlists
Create and manage a playlist to organize your music.
Create a playlist:
1. On the Music Player app, browse for the item you want to add to the playlist.
2. Highlight the item and press Options (right softkey) > Add to playlist.
3. Select New playlist.
4. Enter the name of your new playlist and press Save (center softkey).
Add to an existing playlist
1. On the Music Player app, browse for the item you want to add to the playlist.
2. Highlight the item and press Options (right softkey) > Add to playlist.
3. Highlight the playlist that you want to add the item to, and press
Manage playlist
■
From home, press

Productivity
> Tools > Music player > Playlists.
Highlight a playlist and press Options (right softkey):
•
Rename to change the playlist name.
•
Delete to delete the playlist.
80

Highlight a playlist and press View (left softkey). Highlight an item in a playlist and press
Options (right softkey):
•
Move up or Move down to change the order.
•
Remove to remove the item from the playlist.
•
Delete to delete the item.
•
Details to display information about the item.
Alarm
Your phone comes with a built-in alarm that has multiple alarm capabilities.
1. From home, press
> Tools > Alarm.
2. Highlight an alarm setting and press Edit (center softkey).
- or Press New alarm (left softkey).
3. Turn the alarm on or off by highlighting the alarm field and pressing Set (left softkey).

Highlight On or Off and press
4. Select a time for the alarm by highlighting the time field and pressing Set (left softkey).

Set the time by pressing the navigation key left, right, up or down or using the keypad.
5. Select a repeat status for the alarm by highlighting the repeat field and pressing Set (left softkey).
6. Select a snooze interval for the alarm by highlighting the snooze field and pressing Set (left
softkey).
7. Select a ringer option for the alarm by highlighting the ringers field and pressing Set (left softkey).
8. Select a ringertone for the alarm by highlighting the ringertone field and pressing Set (left softkey).
9. Enter a description for the alarm by highlighting the description field.
10. Press Save (center softkey).
Tip: Press Options (right softkey) > Turn on or Turn off to toggle the alarm on and off.
Countdown Timer
This feature allows you to use your phone as a countdown timer to alert you when a specified period of
time has elapsed. You can set up to five timers.
1. From home, press
Productivity
> Tools > Countdown.
81
2. Highlight a countdown timer and press Options (right softkey) > Edit timer or Add.
3. Set the countdown time by pressing the navigation key up or down or using the keypad.
4. Press Set (center softkey) to save the setting.
5. Press Start (center softkey) to start the countdown.
6. Do any of the following:

Stop (center softkey) to pause the timer. Press Start (center softkey) to resume the timer.

Reset (left softkey) to reset the timer.

Options (right softkey) to do any of the following:
•
Add to add a timer.
•
Edit timer to edit the timer.
•
Delete to delete the timer.
Stopwatch
You can record split times or lap times with the built-in stopwatch.
1. From home, press
> Tools > Stopwatch.
2. Press Mode (left softkey) to select split timing or lap timing.
3. Press Start (center softkey) to start the stopwatch.
4. Press Split or Lap (left softkey) to record the time.
5. Press Stop (center softkey) to stop timing.
6. Press Reset (right softkey) to reset the stopwatch to zero.
File Manager
File manager allows you to view, copy, move, and perform other housekeeping operations on files such
as pictures, videos, music, and applications stored in your phone or on the microSD card.
Open Files in File Manager
1. From home, press
> Tools > File manager.
2. Highlight an option and press

Phone to access files stored in your phone’s memory.

SD card to access files stored on the microSD card.
Productivity
82
3. Highlight a folder and press
4. Highlight a file and press
File Manager Options
When viewing files or folders in File manager, you can access the available options by pressing Options
(right softkey). Available options may vary depending on the selected item:
●
Set as to assign an image to Wallpaper or Contact photo.
●
Set as ringtone to set a music file as your phone ringtone.
●
Send to share the file by using Email, Bluetooth or Messaging.
●
Copy to copy a file from the current folder to another folder in your phone or on the SD card.
●
Move to move a file from the current folder to another folder in your phone or on the SD card.
●
Delete to delete a file or folder from File Manager.
●
Crop to crop an image.
●
Search to search for an item in File Manager.
●
Sort to sort folder contents by Date, Name, Size, or Type.
●
Rename to change the name of a selected folder or file.
●
Add folder to create a new folder.
●
View mode to switch between Grid view and List view.
●
Details to view information about the selected item.
Voice Services
Your phone’s voice services let you place calls using your voice, store voice reminders and record
memos right on your phone. This section includes easy-to-follow instructions for using voice-activated
features and managing Sound Recorders.
Automatic Speech Recognition (ASR)
You can use your phone’s built-in automatic speech recognition (ASR) software to dial a phone number or
to launch phone functions. All you have to do is to talk into the phone and ASR will recognize your voice
and complete tasks by itself.
Activate ASR
■
From home, press and hold
The phone prompts you to say the name of the command you want to use. To complete your task, simply
follow the voice prompts.
Productivity
83
Available ASR commands include:
●
Call  to call an entry in your Contacts list or a spoken phone number. See Make a
Voice Call Using ASR for details.
●
Send Text  to send a message to an entry in your Contacts list or to a spoken
phone number. See Send a Message Using ASR for details.
●
Lookup  to display the detail screen of an entry in your Contacts list. See Display a
Contacts Entry's Information Using ASR for details.
●
Check  to check your phone’s status. See Check Phone Status Using ASR for details.
●
Go To  to jump directly to menu items or applications. See Open Menus Using ASR for
details.
●
Listen to  to play songs by using the Music Player app. See Play a Music
File Using ASR for details.
●
Help to provide a helpful tutorial on how to use ASR. See Open a Tutorial for ASR for details.
Tip: Use ASR in a quiet environment so it can accurately recognize your commands.
Tip: During ASR operation, press Info (left softkey) or Help (right/left softkey) to get instructions for using
the software.
Make a Voice Call Using ASR
1. Press and hold
or
2. When you hear “Say a command,” say “Call.”
3. When you hear “Say the name or number,” say a name or a phone number.
4. When you hear “Which location?,” say a number type (for example, “Mobile”).
Tip: You can skip steps 3 and 4 by saying a name and location after “Call” without pausing (for example,
“Call John Jones mobile”).
Note: If ASR does not recognize the name or number, it will find the most likely matches and display a list
of up to three names or numbers. You will hear “Did you say, ‘Call...?’” followed by the name or number.
You can confirm by saying “Yes.” Say “No” to change the selection.
Send a Message Using ASR
1. Press and hold
or
2. When you hear “Say a command,” say “Send Text” or “Send Message.”
3. When you hear “Say the name or number,” say a name or a phone number.
4. When you hear “Which location?,” say a number type (for example, “Mobile”).
Productivity
84
 The phone displays the text entry screen. See Text and Multimedia Messaging for how to
compose a message.
Display a Contacts Entry’s Information Using ASR
1. Press and hold
or
2. When you hear “Say a command,” say “Lookup.”
3. When you hear “Say the name,” say a Contacts entry’s name.
 The phone displays the detail screen for that Contacts entry.
Check Phone Status Using ASR
You can use ASR to obtain information about your phone:
Status (all of the following except My Phone Number and Volume)
Time
Signal Strength
Network
Battery
My Phone Number
Volume
1. Press and hold
or
2. When you hear “Say a command,” say “Check.”
3. When you hear “Which status item?,” say a command.
Open Menus Using ASR
You can jump directly to many menu items or applications by saying “Go to” followed by a menu option.
1. Press and hold
or
2. When you hear “Say a command,” say “Go To.”
3. When you hear “Which shortcut?,” say an application name (for example, “Messaging”).
 The phone opens the selected menu.
Tip: Say “More Options” to display additional application names.
Productivity
85
Play a Music File Using ASR
1. Press and hold
or
2. When you hear “Say a command,” say “Listen to.”
3. When you hear “Say the song title, artist name, album name, or playlist?,” say a title or name.
Open a Tutorial for ASR
1. Press and hold
or
2. When you hear “Say a command,” say “Help.”
 The tutorial appears in the display.
ASR Settings
To change ASR confirmation:
1. Press and hold
or
2. Press Settings (right softkey) > Confirmation > Name confirmation or Music confirmation.
3. Highlight an option and press

Automatic to ask for confirmation only when the system is not sure what you said.

Always confirm to always ask for confirmation.

Never confirm to never ask for confirmation.
To change the ASR mode:
1. Press and hold
or
2. Press Settings (right softkey) > Audio modes.
3. Highlight an option and press

Expert mode to sound a beep only.

Prompt mode to prompt for required information.

Readout mode to prompt for required information and to read the text displayed on the
screen.
To change the ASR dialing region:
1. Press and hold
Productivity
or
86
2. Press Settings (right softkey) > Dialing region.
3. Highlight an option and press

North america to recognize only numbers valid in North America.

Other to recognize any number regardless of location.
To display the ASR software version:
1. Press and hold
or
2. Press Settings (right softkey) > About.
World Clock
You can view the local time in various cities around the world.
To view the time in different locations:
1. From home, press
> Tools > World Clock.
2. Press Add or Edit (center softkey).
3. Highlight the cities you want and press Select (center softkey).
4. Press Done (left softkey) when you are finished.
Note: Press DST on or DST off (left softkey) to change between daylight saving time and standard time
(if applicable).
Notepad
Your phone offers a simple notepad to allow you to store your notes.
Write a Note
1. From home, press
> Tools > Notepad.
2. Press New note (left softkey).
3. Enter a note, and then press Save (center softkey) to save it.

Press abc (left softkey) to access various text options. See Select a Text Input Mode.
 The note is saved.
View a Note
1. From home, press
> Tools > Notepad.
 The notepad list appears.
Productivity
87
2. Highlight a note you want to view and press
Open the Notepad Options:
■
When viewing the notepad list, press Options (right softkey).

Edit to edit the note.

Delete to delete notes. Highlight the note(s) you want to delete and press Select (center
softkey) , or press Options (right softkey) and select Select all to delete all notes, and then
press Done (left softkey) > Yes (left softkey).

Send to share the note by using Email, Bluetooth or Messaging.

Search to search for a note.

Account to select an account.
Flashlight
Your phone is equipped with an LED flashlight.
Warning: Do not shine the LED flashlight into anyone’s eyes, as doing so may compromise their vision
and cause an accident.
1. From home, press
> Tools > Flashlight.
2. Press Turn on or Turn off (center softkey) turn on or off the flashlight.
- or Press Blink on or Blink off (left softkey) to put the blink mode on or off.
3. Press Options (right softkey) and select:

Brightness to select the brightness level.

Blink speed to select the blink speed.

Light time to select the duration of the light.
Note: You cannot use the LED flashlight in certain situations such as where the battery is very low or the
phone is powering on or off.
Productivity
88
Settings
The following set of topics will cover your phone’s settings menus and options.
89
Wireless & Networks Settings
The following topics cover your phone’s Connections settings options.
Wi-Fi Settings Menu
The Wi-Fi settings menu lets you turn Wi-Fi on or off, set up and connect to available Wi-Fi networks, and
configure advanced Wi-Fi options.
For more information about Wi-Fi settings, see Wi-Fi.
1. From home, press
> Settings > Wireless & networks > Wi-Fi.
2. If necessary, press Turn on (left softkey) to turn Wi-Fi on.
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
3. Press Options (right softkey) for the following menus:

Add network to add a new Wi-Fi network.

Saved networks to display your saved wireless networks.

Refresh to reload the list of networks.

Advanced to configure advanced Wi-Fi settings
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
●
Enable Notification when Open Networks Are Available: From Wi-Fi settings, press Options
(right softkey) > Advanced > Network notification.

The setting is available when Wi-Fi is turned on.

Select On or Off to turn the option on or off.
●
Let location services and other apps scan for networks, even when Wi-Fi is off: From Wi-Fi
settings, press Options (right softkey) > Advanced > Scanning always available.
●
Set Timing for Pausing a Connection: From Wi-Fi settings, press Options (right softkey) >
Advanced > Keep Wi-Fi on during sleep and then select a setting.
●
Install the certificates for communicating via Wi-Fi: From Wi-Fi settings, press Options (right
softkey) > Advanced > Install certificates.

●
Select Internal storage or SD card to open the certificates to install.
Set up a Wi-Fi Protected Setup connection by pressing the set up button on the router:
From Wi-Fi settings, press Options (right softkey) > Advanced > WPS Push Button.
Wireless & Networks Settings
90
●
Set up a Wi-Fi Protected Setup connection by entering the PIN on your router: From Wi-Fi
settings, press Options (right softkey) > Advanced > WPS Pin Entry.
●
Check MAC Address: From Wi-Fi settings, press Options (right softkey) > Advanced.

●
MAC Address appears below “MAC Address.”
Check IP Address: From Wi-Fi settings, press Options (right softkey) > Advanced.

IP Address appears below “IP Address.”
Bluetooth Settings
®
Your phone’s Bluetooth capabilities let you use wireless headsets, send and receive pictures and files,
and more. For details on your phone’s Bluetooth usage, see Bluetooth.
Bluetooth Settings Menu
■
From home, press
> Settings > Wireless & networks > Bluetooth.

Press Turn on (left softkey) to search for other visible in-range Bluetooth devices.

Press Options (right softkey) and choose from the following options:
•
Refresh to update the Available devices list.
•
Visibility to set the length of time your device remains visible.
•
Rename my device to rename your phone for Bluetooth access.
•
Selected device settings to access the options for the highlighted item. The available
menus are Rename, Use for, and Forget.
More Settings
The more settings menu provides access to additional wireless and network options, such as Tethering &
Mobile Hotspot, VPN, roaming, and more.
Hotspot Settings
Use the settings menu to configure your hotspot settings, which allow you to share your phone’s data
service with multiple Wi-Fi capable devices.
Mobile Hotspot Settings
To set up Mobile Hotspot:
1. From home, press
> Settings > Wireless & networks > More > Tethering & Mobile
Hotspot > Mobile Hotspot settings > Configure Mobile Hotspot.
2. Confirm and change your Wi-Fi network SSID (Service Set Identifier) if necessary.
Wireless & Networks Settings
91
3. Highlight the Security field and press Set (left softkey), and select the security level for your
Mobile Hotspot.
4. Enter your password if you selected a security level that uses a password.
5. Press Save (center softkey).
Note: The best way to keep using the phone as a hotspot is to have it connected to a power supply.
To set the timer for turning Mobile Hotspot off:
1. From home, press
> Settings > Wireless & networks > More > Tethering & Mobile
Hotspot > Mobile Hotspot settings > Mobile Hotspot turn off timer.
2. Select a timer option.
To limit maximum connections:
1. From home, press
> Settings > Wireless & networks > More > Tethering & Mobile
Hotspot > Mobile Hotspot settings > Maximum connections.
2. Select the number of devices you will allow to connect.
To view the connected devices:
■
From home, press
> Settings > Wireless & networks > More > Tethering & Mobile
Hotspot > Mobile Hotspot settings > Connected devices.
Virtual Private Networks (VPN)
From your phone, you can add, set up, and manage virtual private networks (VPNs) that allow you to
connect and access resources inside a secured local network, such as your corporate network.
Prepare Your Phone for VPN Connection
Depending on the type of VPN you are using at work, you may be required to enter your login credentials
or install security certificates before you can connect to your company’s local network. You can get this
information from your network administrator.
Before you can initiate a VPN connection, your phone must first establish a Wi-Fi or data connection. For
information about setting up and using these connections on your phone, see Internet Browser and Turn
Wi-Fi On and Connect to a Wireless Network.
Set Up Secure Credential Storage
If your network administrator instructs you to download and install security certificates, you must first set
up the phone’s secure credential storage before setting up a VPN.
Install Security Certificates
1. Download and install the certificates needed to access your local network into an SD card. Your
network administrator can tell you how to do this.
Wireless & Networks Settings
92
2. Insert the SD card into your phone. See Insert an SD Card.
3. From home, press
> Settings > Personal > Security > Install from SD card, and install the
necessary security certificates.
Add a VPN Connection
1. From home, press
> Settings > Wireless & networks > More > VPN.
2. If you are asked to set up a screen lock, press OK (left softkey) and set up a required type of lock.
Tip: You can also set up an advanced VPN connection by selecting Advanced VPN.
3. Select Add VPN profile and enter the information for the VPN you want to add.

Information may include Name, Type, Server address, PPP encryption (MPPE), and
advanced options.

Set up all options according to the security details you have obtained from your network
administrator.
4. Press Save (left softkey).
 Your VPN is added to the VPNs section of the VPN settings window.
Connect to or Disconnect from a VPN
Once you have set up a VPN connection, connecting and disconnecting from the VPN is easy.
Connect to a VPN
1. From home, press
> Settings > Wireless & networks > More > VPN.
2. In the VPNs section, highlight the VPN you want to connect to, and press
3. When prompted, enter your login credentials and then press Connect (left softkey). When you
are connected, a VPN connected icon appears in the status bar.
4. Open the Web browser to access resources such as intranet sites on your corporate network.

When you are connected, a VPN connected icon appears in the notification area.
Disconnect from a VPN
1. From home, press
> Settings > Wireless & networks > More > VPN.
2. In the VPNs section, highlight the VPN you want to disconnect from, and press
3. Press Disconnect (left softkey).
Wireless & Networks Settings
93

When your phone has disconnected from the VPN, you will see a VPN disconnected icon in
the notification area of the status bar.
Cellular Network Settings
The cellular network settings menu lets you configure roaming, network mode and Access Point Names.
Data Roaming
Roaming Settings
1. From home, press
> Settings > Wireless & networks > More > Cellular networks >
Roaming > Roaming settings.
2. Select the check box for each service you want to enable when roaming:

Domestic voice & text to allow voice and text communication only on domestic roaming
systems.

Domestic data to allow data communication only on domestic roaming systems.

International voice & text to allow voice and text communication on international roaming
systems.

International data to allow data communication on international roaming systems.
3. Press Save (left softkey).
Note: Data service is not available without voice service for both domestic and international settings.
Disabling voice service automatically disables its data service.
Roaming Alerts
Roaming alerts provide a warning when your device is roaming on another carrier's network.
1. From home, press
> Settings > Wireless & networks > More > Cellular networks >
Roaming > Roaming alerts.
2. Select the check box for each service you want to enable Roaming alert for:

Domestic voice to display a prompt that will require you to respond anytime you attempt to
access voice service on domestic roaming systems.

Domestic data to display a prompt that will require you to respond anytime you attempt to
access data service on domestic roaming systems. The prompt will not appear again while
you are in the data session you allowed.

International voice to display a prompt that will require you to respond anytime you attempt
to access voice service on international roaming systems.

International data to display a prompt that will require you to respond anytime you attempt to
access data service on international roaming systems. The prompt will not appear again while
you are in the data session you allowed.
Wireless & Networks Settings
94

International outgoing text messages to display a prompt that will require you to respond
anytime you attempt to send a text message while roaming internationally.
3. Press Save (left softkey).
Network Mode
To Set Your Network Options
1. From home, press
Network mode.
> Settings > Wireless & networks > More > Cellular networks >
2. Select Automatic, LTE/CDMA, CDMA, or UMTS.
Access Point Names
You can view or change the Access Point Name (APN) for data services on your phone.
To change the APN:
1. From home, press
> Settings > Wireless & networks > More > Cellular networks >
Access Point Names.
2. Highlight your desired APN and press
Restrict Background Data
The restrict background data settings menu allows you to restrict the background data usage on cellular
networks for the selected application.
1. From home, press
> Settings > Wireless & networks > Restrict background data.
2. Select the application you want to restrict or allow the background data usage.
3. Select from Never, Always or During roaming only.
 The selected setting is applied and saved.
Wireless & Networks Settings
95
Device Settings
The following topics outline the device settings options available on your phone, including sounds, display,
storage, and more.
Call Setup
Your phone’s call settings menu lets you configure your voicemail options and a number of other settings
for the phone application. See Call Settings for details.
Display Settings
Use the phone's display settings menu to adjust items such as wallpaper, brightness, screen timeout, and
more.
Brightness Level
1. From home, press
> Settings > Device > Display > Brightness level.
2. Select the brightness level and press
Key Backlight
1. From home, press
> Settings > Device > Display > Key backlight.
2. Select a time to elapse before the key backlight turns off or Same as Sleep.
– or –
If you want to turn the key backlight off, select Off.
Wallpaper
1. From home, press
> Settings > Device > Display > Wallpaper.
2. Select a wallpaper option (Preloaded or Gallery) and select a wallpaper.
Sleep
1. From home, press
> Settings > Device > Display > Sleep.
2. Select a time to elapse before entering sleep mode.
Font Size
Adjust the font size for the screen. This setting does not affect all screens.
1. From home, press
Device Settings
> Settings > Device > Display > Font size.
96
2. Select a font size.
Notification
This option allows you to enable or disable notification pop-ups when you receive a new notification
(except for incoming call and alarm) while an application is running.
1. From home, press
> Settings > Device > Display > Notification.
2. Select Enable pop-up or Disable pop-up.
Tip: If you select Disable pop-up, you will see only a notification icon. (The notification pop-up will not
appear while an application is running.)
Clock Display
1. From home, press press
> Settings > Device > Display > Clock.
2. Select On or Off to turn the Clock on or off.
Sound & Notification Settings
The sound & notification settings menu lets you control your phone’s audio, from ringtones and alerts to
key tones and notifications.
Volume Settings
1. From home, press
> Settings > Device > Sound & notification > Media volume, Alarm
volume, Ring volume, or System Volume.
2. Adjust the volume level by pressing the navigation key left or right and press
Note: If the Ring volume is set to Silent or Vibrate, the System volume will be automatically set to
Volume off and you cannot change the setting.
Phone Ringtone
1. From home, press
> Settings > Device > Sound & notification > Phone ringtone.
2. Select a ringtone.
Vibration Settings
To turn on or off the vibration for phone calls:
1. From home, press
> Settings > Device > Sound & notification > Vibrate for calls.
2. Select On or Off to turn the vibration for calls on or off.
To set the vibration pattern:
Device Settings
97
1. From home, press
> Settings > Device > Sound & notification > Vibration pattern.
2. Make your desired selection.
To set the vibrate intensity:
1. From home, press
> Settings > Device > Sound & notification > Vibrate intensity.
2. Select Weak, Medium, or Strong.
To turn on or off the vibration on keypress:
1. From home, press
> Settings > Device > Sound & notification > Vibrate on keypress.
2. Select On or Off to turn the vibration on keypress on or off.
Other Sound Settings
To set a sound for notifications:
1. From home, press
> Settings > Device > Sound & notification > Notification sound.
2. Make your desired selection.
To set the key tone:
1. From home, press
> Settings > Device > Sound & notification > Key tone.
2. Select Type 1 or Type 2.
To turn on or off the battery charging tone:
1. From home, press
> Settings > Device > Sound & notification > Battery charging tone.
2. Select On or Off to turn the battery charging tone on or off.
To turn on or off the battery charged tone:
1. From home, press
> Settings > Device > Sound & notification > Battery charged tone.
2. Select On or Off to turn the battery charged tone on or off.
To turn on or off the sound when you turn the phone on:
1. From home, press
> Settings > Device > Sound & notification > Power-up tone.
2. Select On or Off to turn the power-up tone on or off.
Persistent Alerts
1. From home, press
Device Settings
> Settings > Device > Sound & notification > Persistent alerts.
98
2. Press Turn on or Turn off (left softkey) to turn Persistent alerts on or off.
3. The following options are available:

Audible tone: Select On to beep when notification is on the notification bar.

Vibrate: Select On to vibrate when notification is on the notification bar.

Blink LED: Select On to blink the LED indicator when notification is on the notification bar.

Repeat interval: Sets the reminder interval.
Hearing Aid Device Compatibility
Your phone has been tested and rated for hearing aid device compatibility. To use this function effectively,
set the hearing aid option to On.
1. From home, press
> Settings > Device > Sound & notification > Hearing aid.
2. Select On or Off to turn the hearing aid device compatibility function on or off.
Programmable Key Settings
You can assign your favorite behavior to the programmable key. Press and hold the key to call up the
assigned function.
To use as a PTT key:
1. From home, press
> Settings > Device > Programmable key / PTT > PTT.
2. Select On or Off to turn the PTT function on or off.
To assign other function:
1. From home, press
> Settings > Device > Programmable key / PTT > Programmable key.
2. Highlight a function and press Set (left softkey).
Navigation Key Shortcuts
You can use the navigation keys as shortcuts to access specific menu items directly from the Home
screen. You can reassign the default shortcuts to the menu items you choose.
1. From home, press
> Settings > Device > Navigation keys.
2. Highlight the navigation key you wish to reassign and press
3. Highlight a function.
4. Press Set (left softkey) to save. (For options with submenu levels, such as Settings, you can
assign submenu options by navigating to the desired option before pressing Set.)
Device Settings
99
Keyguard
This feature enables you to prevent unintended operations by accidentally pressing them. You can place
a 911 call (see Call Emergency Numbers) even when the keyguard feature is on.
To lock the keys and buttons:
■
Press and hold
To unlock the keys and buttons:
■
Press
and then press
You can also set the keyguard feature from the settings menu so that it is enabled every time the screen
backlight goes off in standby mode.
1. From home, press
> Settings > Device > Keyguard.
2. Select On. Select Off to deactivate this feature.
Note: The keyguard feature will be temporarily disabled when you receive an incoming call or certain
notification such as for alarm. It will be automatically enabled again if you left the phone without
responding to the call or notification.
Note: Once a lock type is set to PIN or Password, the keyguard feature will be disabled. (See Lock
Screen Settings.)
Storage Settings
The storage settings menu lets you manage internal storage on your phone and provides menu choices
for an optional SD card (not included).
View Memory Information
1. From home, press
> Settings > Device > Storage.
2. Review your storage settings by pressing the navigation key up or down.

Phone: View the total space, available space and space used by specific features on your
phone's internal storage.

SD card: View total space and available space memory usage on an optional installed
memory card.
•
Mount SD card: Prepare a memory card for use as storage in the phone. This option is
only displayed if a memory card is installed. Select this setting to mount the card and
make it available for use.
•
Unmount SD card: Prepare an installed memory card for safe removal. Select this
setting and press Yes (left softkey) to unmount the card to allow for safe removal.
Device Settings
100
•
Erase SD card: Permanently remove all content from an installed memory card. Select
this setting and press
to erase all data stored on the card and prepare it for use by
your phone. The deleted data CANNOT be retrieved.
Connectivity Settings
You can use the supplied USB cable to connect your phone directly to your computer and transfer music,
pictures, and other content files.
1. From home, press
> Settings > Device > Connectivity > USB connection type.
2. Choose from following options:

Charge only: Charges the battery.

Media device (MTP): Connects the phone as a media device and transfers media files.

USB tethering: Lets the PC use your phone to connect to Internet.
Device Settings
101
Personal Settings
The following topics cover your phone’s personalization settings, including location privacy and access,
security, lock screen settings, accounts, and reset options.
Location Settings
Your location services settings menu lets you select how your phone determines its location (using the
wireless networks, GPS satellites, both, or neither).
Enable Location Services
Before using any features that require location assistance, you must enable your phone’s location
services.
1. From home, press
> Settings > Personal > Location > Location.
2. Select On to turn the location services on.
 Your phone’s location services are enabled.

If you see a confirmation, follow the onscreen instructions to connect.
Select a locating method
1. From home, press
> Settings > Personal > Location > Mode.
2. Choose the locating method:

High accuracy: Use GPS, Wi-Fi, and cellular networks to determine location.

Battery saving: Use Wi-Fi and cellular networks to determine location.

Device only: Use GPS to determine your location.
Security Settings
The security settings menus let you set encryption options, password visibility, administrator settings, and
credential storage options.
Many security settings are dependent on screen lock settings, SIM lock settings, etc.
Lock Screen Settings
The lock screen settings let you set your method for unlocking your phone, customize lock screen options,
determine whether to show pop-up tips for unlocking the phone, and enter your owner information to be
displayed on the lock screen.
Personal Settings
102
Screen Lock
You can increase the security of your phone by creating a screen lock. When enabled, you have to enter
the correct PIN, or enter the correct password to unlock the phone’s control keys and buttons.
In order from least secure to most secure, the available screen lock options are:
●
None
●
PIN
●
Password
Important: To protect your phone and data from unauthorized access, it is recommended that you use
the highest security level available (Password protection). It is also recommended you frequently change
your password to ensure the safety of your phone and personal data.
Access Screen Lock Settings
1. From home, press
> Settings > Personal > Security > Lock type.
2. Choose the lock type:

None: Turn off the screen lock.

PIN: Enter four to sixteen digits PIN code to unlock.

Password: Enter four to sixteen letters, digits, or symbols to unlock.
Set the screen lock time
1. From home, press
> Settings > Personal > Security > Screen lock time.
2. Make your desired selection.
Disable the Screen Lock
Follow the instructions below to turn off your current screen lock.
1. From home, press
> Settings > Personal > Security > Lock type.
2. Enter your PIN, or enter your password.
3. Select None.
 The screen lock is disabled.
Note: If you fail to enter the correct password after five attempts, you will be prompted to wait for 30
seconds before you can try again.
Other Security Settings
1. From home, press
Personal Settings
> Settings > Personal > Security.
103
2. The following settings are available:

Encrypt & Decrypt data: Encrypt the data in your phone and an optional SD card installed in
your phone.

SIM card lock: Set up a PIN to lock your phone's SIM card (may not be available on your
device).

Make passwords visible: Allows you to see the password as you type.

Reset password: Allows you to set or change password to be used to reset your phone or
phone contents. For more information about the reset feature, see Reset Your Phone and
Phone Content.

Device administrators: View or deactivate device administrators.

Unknown sources: Allow installation of apps from unknown sources.

Trusted credentials: Allows you to see the trusted credentials on your phone’s system.

Install from SD card: Allows you to install encrypted certificates from the microSD card.

Clear credentials: Clear all the credentials on your phone.
Accounts
The Accounts settings menu lets you add and manage all your email, social networking, and picture and
video sharing accounts.
Set Up a New Account
1. From home, press
> Settings > Personal > Accounts >Add account.
2. Select an account type.
3. Follow the onscreen instructions to add an account.
Remove Existing Accounts
1. From home, press
> Settings > Personal > Accounts.
2. Select an account type.
3. Select Account settings > Remove (right softkey).
4. Highlight an account you want to remove and press Select (center softkey).
5. Press Done (left softkey) and press Yes (left softkey).
Language & Input Settings
Your phone’s language and input settings let you select a language for the phone’s display and menus,
and set options for entering text.
Personal Settings
104
Language Settings
Set the language for your display and menus.
1. From home, press
> Settings > Personal > Language & Input > Language.
2. Select English or Español.
Text Entry
The Text Entry menu allows you to specify a suitable feature during the text entry process.
1. From home, press
> Settings > Personal > Language & Input > Text entry.
2. The following settings are available:

Word complete to suggest possible words based on letters you have entered.

Next word complete to automatically display the word that may follow the current text input.

Word scan to allow the predictive text input system to recognize words by searching
Contacts.

Input language to select the language to enter (English or Spanish).

My words to edit or delete custom words you have added to the predictive text database.
•

Auto substitution to replace abbreviated words or phrases with full-text equivalents you
added.
•

Press Add word (right softkey) to store words that you frequently use.
Press Add word (right softkey) to store pairs of words that you want to use in this
function.
Help (left softkey) to view the instructions on entering text.
Reset Your Phone and Phone Content
This option lets you clear different types of personal information stored on your phone and reset your
phone to factory settings.
Access Reset Options
1. From home, press
> Settings > Personal > Reset phone.
2. Read the message and press
3. Enter your reset password, if required. See Reset password.
Personal Settings
105
System Settings
The following topics detail your phone’s system settings options, including date and time, accessibility,
about phone, and system updates.
Date and Time Settings
Your phone obtains date and time information from the network. These values also can be manually set.
1. From home, press
> Settings > System > Date & time.
2. Select Automatic date & time and select Off to set it off.

If set to On, you cannot set the date or time values manually.
3. Select Set date. Adjust the month, date, and year by pressing the navigation key up, down, left,
or right, or using the keypad. Press Set (center softkey) when finished.
4. Select Set time. Adjust the hour and minute and select AM or PM by pressing the navigation key
up, down, left, or right, or using the keypad. Press Set (center softkey) when finished.
5. Select Automatic time zone and select Off to set it off.

If set to On, you cannot set the time zone values manually.
6. Select Select time zone and then select a time zone from the onscreen list. Scroll down the list
to view additional time zones. Press
to set.
7. Select Use 24-hour format and select On to set to 24-hour format.
 Your date and time settings are applied and saved.
Accessibility Settings
The accessibility menu lets you enable and manage accessibility-related applications.
Voice Guide
Voice Guide allows you to hear voice prompts and spoken numbers or key names as you press a key,
and also to hear menus and options, Contacts names, email addresses, URLs, etc., as you highlight each
item onscreen. (The default setting is Off.)
Enable Voice Guide
1. From home, press
Speech output.
> Settings > System > Accessibility > Voice services > Voice guide >
2. Select On or Off.
Note: When the Media volume is set to Volume off, Voice Guide does not work. (See Volume Settings.)
System Settings
106
Tip: To change the language used for Voice Guide, see Language Settings.
Adjust the Speech Rate
You can adjust the rate at which onscreen text is spoken by the phone.
1. From home, press
Speech rate.
> Settings > System > Accessibility > Voice services > Voice guide >
2. Select Slow, Normal, or Fast.
Voice Recognition
You can use your phone’s built-in automatic speech recognition (ASR) software to dial a phone number in
your contacts or to launch phone functions. See Automatic Speech Recognition (ASR) for details.
Large Text
1. From home, press
> Settings > System > Accessibility > Large text.
2. Select On or Off to turn large text function on or off.
Color Inversion
1. From home, press
> Settings > System > Accessibility > Color inversion.
2. Select On or Off to turn color inversion on or off.
Color Correction
1. From home, press
mode.
> Settings > System > Accessibility > Color correction > Correction
2. Make your desired selection.
Persistent Alerts
Set alerts such as beep, vibration, or LED blinking for notifications. See Persistent Alerts.
Captions
1. From home, press
> Settings > System > Accessibility > Captions.
2. Press On (right softkey) to turn the captions on.
3. When captions are enabled, you can configure the following settings:

Language: Select the language in which you want captions to appear.

Text size: Select the size for your caption text.
System Settings
107

Caption style: Select the style and color for your caption text and background. If you select
Custom, you can then select additional options.

Font family: Select the font for your caption text.

Text color: Select the color for your caption text.

Text opacity: Select the opacity for your caption text.

Edge type: Select the edge type for your caption text.

Edge color: Select the edge color for your caption text (only available when a edge type is
selected).

Background color: Select the background color for your caption text.

Background opacity: Select the background opacity for your caption text.

Caption window color: Select the caption window color for your caption text.

Caption window opacity: Select the caption window opacity for your caption text (only
available when a caption window color is selected).

Display: Select how to display your caption text.
Note: To preview the captions, press Preview (left softkey).
Mono Audio
1. From home, press
> Settings > System > Accessibility > Mono audio.
2. Select On or Off to turn mono audio on or off.
Sound Balance
1. From home, press
> Settings > System > Accessibility > Sound balance.
2. Move the slider to adjust the balance by pressing the navigation key left or right.

A sound clip will play when you move the slider.
3. Press
to set.
TTY Use
A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows people who
are deaf, hard of hearing, or who have speech or language disabilities to communicate by telephone.
Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY
device to ensure that it is compatible with digital cell phones. Your phone and TTY device will connect via
a special cable that plugs into your phone’s headset jack. If this cable was not provided with your TTY
device, contact your TTY device manufacturer to purchase the connector cable.
System Settings
108
To turn TTY Mode on or off:
1. From home, press
> Settings > System > Accessibility > TTY.
2. Select one of the following options:

TTY Off to disable TTY mode.

TTY Full to enable all TTY settings. You can send and receive text during a call.

TTY HCO to enable TTY mode in Hearing Carry Over mode, which allows you to send text
and receive voice during a call.

TTY VCO to enable TTY mode in Voice Carry Over mode, which allows you to send voice
and receive text during a call.
Note: In TTY Mode, your phone will display the TTY icon if a TTY device or an optional headset is
connected to your phone.
Note: When enabled, TTY mode may impair the audio quality of non-TTY devices connected to the
headset jack.
Warning: 9-1-1 Emergency Calling
It is recommended that TTY users make emergency calls by other means, including Telecommunications
Relay Services (TRS), analog cellular, and landline communications. Wireless TTY calls to 9-1-1 may be
corrupted when received by public safety answering points (PSAPs), rendering some communications
unintelligible. The problem encountered appears related to TTY equipment or software used by PSAPs.
This matter has been brought to the attention of the FCC, and the wireless industry and the PSAP
community are currently working to resolve this.
About Phone
The About phone menu lets you access and view important phone information including your phone
number, battery status, and legal information.
■
From home, press
> Settings > System > About phone.

You can confirm Model number, Software version, Build number etc.

Select Status to confirm your phone’s status. You can view Battery level, My phone
number, IMEI (International Mobile Equipment ID), Bluetooth address, etc.

Select Regulatory information to access legal information.

Select Safety & Warranty to open the web browser to show Safety & Warranty information.
System Update
The system update menu provides settings for keeping your phone up-to-date with the latest software.
1. From home, press
System Settings
> Settings > System > System updates.
109
2. Select one of the following options:

Update firmware to update the phone's firmware package.

Update profile to update the phone's voice and data settings.

Update PRL to update the phone's coverage area Update firmware to update the phone's
firmware package.

UICC unlock to unlock SIM card.
System Settings
110
Getting Help
The following set of topics will cover troubleshooting tips, phone specifications, etc.
System Settings
111
For Assistance
The following topics address areas of support for your phone, including troubleshooting, account
information, and customer service contact information.
Troubleshooting
Check the questions and answers below for troubleshooting solutions for common phone questions.
Check Here First
Question: Phone freezes/operation is unstable.
Answer: Turn the phone on again. If you are unable to turn the phone off, remove and replace the
battery, and then turn the phone on again. Data that was being edited is erased after your phone is
powered on again.
Question: Cannot use phone, mail, or Internet.
Answer 1: Check whether you are where signal is weak or out of service area.
Answer 2: Power the phone on again.
Answer 3: Is the phone in Airplane mode? To check that Airplane mode is canceled:

From home, press
> Settings > Wireless & networks > More > Airplane mode.
Question: Battery level goes down quickly.
Answer: Are you where signal is weak or have been out of service area for a long period? Calling
where signal is weak or being out of service area uses a lot of battery.
Question: Cannot unlock screen.
Answer: Power the phone on again. If you are unable to turn the phone off, remove and replace the
battery, and then power the phone on again. Data that was being edited is erased after the phone is
powered on again.
Specifications
The following tables list your phone’s and battery’s specifications.
Phone Specifications
Item
Description
Weight
Battery installed: Approx. 240 g
For Assistance
112
Continuous Talk Time
3G: Approx. xxx minutes
3G: Approx. xxxxx minutes
Continuous Standby Time
4G LTE: Approx. xxxxx minutes
Charging Time
Approx. xxx minutes
Dimensions
Approx. 142 x 61.4 x 24.9 mm
3G: 0.xx mW
Maximum Output
4G LTE: 0.xx mW
3G: Up to 3.1 Mbps downlink/up to 1.8 Mbps uplink
Communication Speed
4G LTE: Up to 150 Mbps downlink/up to 50 Mbps uplink
Battery Specifications
Item
Description
Voltage
x.x V
Type
Lithium-ion
Capacity
3000 mAh
Dimensions (W x H x D)
Approx. xx x xx x xx mm
Copyright Information
©2017 Kyocera Corporation. KYOCERA is a registered trademark of Kyocera Corporation. All other
trademarks are the property of their respective owners.
®
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Kyocera Corporation is under license. Other trademarks and trade names are those
of their respective owners.
®
®
Nuance , the Nuance logo, VSuite™ and XT9 are trademarks or registered trademarks of Nuance
Communications, Inc. or its subsidiaries in the United States of America and/or other countries.
microSD and microSDHC Logos are trademarks of SD-3C, LLC.
For Assistance
113
Index
3-way Calling, 30
4G, 52
Accessibility, 106
Account
Corporate, 47
Accounts
Add new, 104
Settings, 104
Airplane Mode, 14
Answer a Call, 24
ASR
Settings, 86
Auto-Answer Mode, 31
Automatic Speech Recognition (ASR), 83
Back Key, 4
Bluetooth
Receive information, 62
Send information, 61
Settings, 91
Settings Menu, 61, 91
Share pictures and videos, 70
Turn on or off, 60
Browser
Launch connection, 53
Menu, 55
Web Navigation, 53
Calculator, 76
Calendar, 72
Add a Task, 73
Add event, 72
Alerts, 74
Edit Calendar Events, 75
Invite Guests, 73
Options, 76
View events, 75
Call
Settings, 30
Call Answer Mode, 31
Call Forwarding, 30
Call Waiting, 29
Caller ID, 29
Camera, 66
Activate, 66
Assign Pictures, 68
Deactivate, 66
Index
Settings, 70
Take a Picture, 66
Charger Port, 5
Conference Calling, 30
Contacts, 33
Add a Group Entry, 37
Add contact, 33
Assign a Speed Dial Number, 31
Delete, 36
Delete a Group Entry, 38
Display Options, 35
Edit, 35
Edit a Group, 37
Find, 38
ICE Contacts, 39
Import, 40
Make call from, 26
New Group Entry, 37
Remove a Group Entry, 37
Rename a Group, 37
Save a phone number, 34
Share, 40
View, 34
Corporate
Add an Account, 47
Data Services, 52
Status indicators, 53
User name, 52
Web Navigation, 53
Date and Time, 106
Edit
Calendar Events, 75
Email
Add account, 46
Delete account, 49
Manage inbox, 50
Send message, 47
Settings, 50
Share pictures, 69
View and reply, 49
Emergency Alerts, 45
Emergency Numbers, 23
Enhanced 9-1-1 (E 9-1-1), 24
Enter Text, 14
File Manager, 82
114
Files
Transfer between phone and computer, 63
Flash, 5
Flashlight, 88
Gallery
View pictures and videos, 67
GPS Satellites, 102
Headset Jack, 4
Home Screen, 19
Hotspot, 62
Settings, 91
ICE (In Case of Emergency) Contacts, 39
Personal information, 39
Import Contacts, 40
Incoming Call
Answer, 24
Reject, 24
Keyguard, 100
Location
GPS satellites, 102
Wireless networks, 102
Location Services, 102
Make a Call
To a Number in a Message, 27
Using ASR, 84
Using Speed Dial, 27
Using the Plus (+) Code, 27
With Pauses, 26
Menu
Navigation, 13
Messaging, 42
Conversations, 43
Draft messages, 43
Emergency Alerts, 45
Notifications, 43
Options, 44
Send messages, 42
Mobile Hotspot, 62
Multimedia Messaging
Share pictures and videos, 69
Music Player, 79
Play, 79
Playlist, 80
Notepad, 87
Notification Icons, 21
Notifications, 21
Phone
Keypad, 23
Reset, 105
Index
Phone Calls, 23
Answer, 24
Emergency numbers, 23
Using contacts, 26
Using phone keypad, 23
Using Recent calls, 26
Phone Layout (illustration), 3
Phone Number
Save to contacts, 34
With Pauses, 26
Phone Update
Software, 17
Pictures
Assign, 68
Crop, 68
Share via Bluetooth, 70
Share via email, 69
Share via messaging, 69
Take, 66
Take with camera, 66
View, 67
Plus (+) Code Dial, 27
Power Off, 12
Power On, 12
Programmable Key, 99
Quick Responses, 31
Recent calls
Make call from, 26
Reject Incoming Call, 24
Reset, 105
Save a Phone Number, 34
Screen Lock, 103
Secure Credential Storage, 92
Security
Reset Phone, 105
Security Settings, 102
Settings
About Phone, 109
Connectivity, 101
Keyguard, 100
Language, 105
Language & Input, 104
Navigation Key Shortcuts, 99
Phone Call, 30
Text Entry, 105
Wireless & Networks Settings, 90
Share
Contacts, 40
Shortcuts
115
Navigation Key, 99
Sound & Notification Settings, 97
Speaker, 4
Speed Dial, 27
Assign Numbers, 31
Status Bar, 20
Status Icons, 20
Storage
Settings, 100
Tethering, 63
Text Entry, 14
Tip Calculator, 77
TTY Use, 108
Turn Device Off, 12
Turn Phone On, 12
Typing, 14
Unit Converter, 77
USB Port, 5
Video
Activate, 66
Deactivate, 66
Video Camera
Record video, 67
Videos
Record, 67
Index
Share via Bluetooth, 70
Share via messaging, 69
View, 67
Voice Guide, 106
Voice Services, 83
Automatic Speech Recognition (ASR), 83
Voicemail, 32
Notification, 28
Retrieve Messages, 28
Settings, 32
Setup, 28
Volume
Key, 5
VPN, 92
Add connection, 93
Connect or disconnect, 93
Prepare for connection, 92
Secure credential storage, 92
Web
Launch connection, 53
Navigation, 53
Wi-Fi, 58
Settings, 90
Turn on and connect, 58
116
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Rob Nussbaum
Create Date                     : 2017:05:26 18:06:00+09:00
Modify Date                     : 2017:05:27 00:11:01+09:00
Language                        : ja-JP
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : Rob Nussbaum
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2017:05:27 00:11:01+09:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:e9eda4f2-2f38-479a-b7d7-be8b088396d1
Instance ID                     : uuid:286d1ec5-9c6b-4914-965d-de1069632095
Page Count                      : 123
EXIF Metadata provided by EXIF.tools
FCC ID Filing: V65E4750

Navigation menu