LCN 1450 Series Drop Plate Installation Instructions Guide 110984

User Manual: LCN LCN 1450 Drop Plate Installation Guide Installation Guide

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

*71376*

1450 Series

71376
Drop Plate

Installation Instructions

Pull side Arm Mounted On:
1450-18 Drop Plate
1450-18FC Drop Plate

1450 PULL SIDE (DOOR MOUNT) DROP PLATES
5¹⁄₂"

1³⁄₄"

1"

⁷⁄₈"
Opening

1³⁄₁₆"
A

4"

4"

4"

Dimension A

To 100°

7 ¹⁄₂"

100° -130°

6"

Over 130°

4 ¹⁄₂"

12"
Right Hand Door Shown
Left Hand Door Opposite

CL of Hinge/Pivot

Push Side Arm Mounted On:
1450-18 Drop Plate

1450 PUSH SIDE (TOP JAMB) DROP PLATES
1450-18 Drop Plate
⁵⁄₈"

Opening

⁵⁄₁₆"
A

4"

4"

4"

3"

12"
5¹⁄₂"

1³⁄₄"

1450-18PA Drop Plate

7 ¹⁄₂"

100° -130°

6"

Over 130°

4 ¹⁄₂"

Push Side Arm Mounted On:
1450-18PA Drop Plate

1”

⁵⁄₁₆"
A

4"

4"

Opening

4"

12"
4"
CL of Hinge/Pivot

To 100°

⁷⁄₈

Left Hand Door Shown
Right Hand Door Opposite

CL of Hinge/Pivot

Dimension A

Dimension A

To 100°

7 ¹⁄₂"

100° -130°

6"

Over 130°

4 ¹⁄₂"

Left Hand Door Shown
Right Hand Door Opposite

5¹⁄₂"

1³⁄₄"
7
16

1
2

3
1
15
3
1 1 14 1 2 116 2 8 2 4

11 13 25

4 18 5 12

4

32 38 49 60 70 102

7 7 34 7 78 8 14 11 14 11 58 12 34

105 140 178 197 200 210 286 295 324

1450-18

1450-18FC

1450-18PA

General Notes:
1. On Top Jamb & Hinge Face Mounts. Locate Closer & Shoe From CL Of Pivot or Swing Clear Hinge Pin When Used.
2. On Top Jamb Mounting When Overhead Stop is Used, Shoe Must Be Lowered To Clear Holder.
3. For 180° Opening On Hinge Face Mounts, Max Buttsize Is 5" X 5"
4 Reinforcing Per ANSI/SDI-100 Recommended For Hollow Metal Doors and Frames.

Push Side Parellel Arm Mounted On:
1450-18PA Drop Plate
1450-18PAFC Drop Plate

1450 Push Side (Door Mount) Drop Plates
Door

¹⁄₂"

A

³⁄₈"

2 ³⁄₄"

Stop

⁷⁄₁₆"
Opening

2"

Dimension A Dimension B

To 100°
Over 130°

9 ¹⁄₂"

3 ³⁄₄"

7"

1 ¹⁄₄"

CL of Hinge/Pivot
Left Hand Door Shown
Right Hand Door Opposite

1 ⁵⁄₈”
⁵⁄₁₆”

1⁷⁄₈

4”

B

4”

4”

12”

CL of Hinge/Pivot

1450-18PA
5
16

8

1
2

13

11
16

7
8

17 22

1450-18PAFC
3
3
11
1161 116
1 34 2 8 2 4

27 43 44 60 70

3 12 5 14 5 12 8 34 1112 12 34

89 133 140 222 292 324

General Notes:
1. On Top Jamb & Hinge Face mounts. Locate closer & shoe from CL of pivot or swing clear hinge pin when used.
2. On Top Jamb mounting when overhead stop is used, shoe must be lowered to clear holder.
3. Reinforcing Per ANSI/SDI-100 recommended for hollow metal doors and frames.

1450 Cush
Drop Plates

Push Side, Parellelarm Mounted On:
1450-18PA Drop Plate
1450-18PAFC Drop Plate

Door

A

³⁄₈"

⁵⁄₁₆"
⁷⁄₁₆"

2 ³⁄₄"
2"
1 ³⁄₈"

Stop

2 ¹⁄₁₆"

CL of Hinge/Pivot

IMPORTANT
Use spacer block provided
for Fifth screw ¹⁄₂" or ⁵⁄₈"
1 ¹⁄₄”
⁵⁄₁₆”
4”

B

4”

4”

Notes:
1. Minimum Top Rail Width
is 1 ¹⁄₂"

12”

CL of Hinge/Pivot
Opening
General Notes:
1. If door is hung on pivots
Locate closer and shoe from
CL of pivot point.

2. Top rail less than 4 3/4
Requires drop plate.
3. All dimensions applicable
For hold open or dead stop.
4. Delayed action optional.
5. Reinforcing per. ANSI/SDI-100
Recommended for hollow
Metal door and frames.
6. 5/8 maximum allowable side
Stop.
7. Using fasters prodvided
Mount drop plate with
(4) 1/4 - 14 x 1 3/8 S.R.T.
Mount closer to drop plates
(4) 1/4 - 20 x 1/2 P.H.M.S.
Increase this dimension to
15/16 for spring cush FC

*

85°
90°
95°
100°
105°
110°

Dimension A Dimension B
11"

5 ¹⁄₂"

10 ¹⁄₄"
9 ¹⁄₂"
8 ⁷⁄₈"
8 ¹⁄₄"
7 ⁵⁄₈"

4 ³⁄₄"
4"
3 ³⁄₈"
2 ³⁄₄"
2 ¹⁄₈"

1450-18PA

1450-18PAFC

1450 EDA
Drop Plates

Push Side, Parellel Arm Mounted On:
1450-18PA Drop Plate
1450-18PAFC Drop Plate

Door

¹⁄₂"

A

³⁄₈"

Stop

2 ³⁄₄"
2"
1"

⁷⁄₁₆"

2 ¹⁄₁₆"

IMPORTANT
Use spacer block provided
for Fifth screw ¹⁄₂" or ⁵⁄₈"
1 ¹⁄₄”
⁵⁄₁₆”
4”

B

4”

4”

12”

CL of Hinge/Pivot

Left Hand Door Shown
Right Hand Door Opposite

Opening
To 100°
Over 120°*

Dimension A Dimension B
9 ¹⁄₂"

3 ³⁄₄"

7"

1 ¹⁄₄"

* Door openings to 180˚ conditions permitting

1450-18PA

1450-18PAFC

General Notes:
1. If door is hung on pivots locate closer and shoe from CL of pivot point. (consult factory if using swing clear hinges.)
2. Closer size 12 1/4 x 2 3/4 x 2 3/8.
3. Top rail less than 4 3/4 requires drop plate.
4. All dimensions applicable for hold open.
5. Delayed action optional.
6. Reinforcing per ANSI/SDI-100 recommended for hollow metal door and frames.
7. 5/8 maximum allowable side stop.
8. Using fasters provided mount drop plate with (4) 1/4 - 14 x 1 3/8 S.R.T. mount closer
to drop plates with (4) 1/4 - 20 x 1/2 p.H.M.S. Max. Butt hinge size 5 x 5.

Customer Service
1-877-671-7011

www.allegion.com/us

© Allegion 2015
Printed in U.S.A.
71376 Rev. 01/16-b



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.5-c021 79.153613, 2013/07/11-05:21:54
Format                          : application/pdf
Subject                         : 
Description                     : closers;door controls;medium duty;1000 Series;aluminum;1450-18;1450-18PA;1450-18FC;1450-18PAFC;EDA;CUSH;push side mount;top jamb; pull side mount;PA mount;
Modified                        : 2016:06:03 14:41:43Z
Title                           : LCN 1450 Series Drop Plate Installation Instructions
Size                            : 457880
Sha 1                           : 0fb65c54348376051cbc0e6b3d3538dca6dae8e0
Extracted                       : 2016:12:07 00:18:35Z
Modify Date                     : 2016:02:11 17:49:09Z
Create Date                     : 2016:01:28 22:12:24Z
Metadata Date                   : 2016:02:11 17:49:09Z
Creator Tool                    : Adobe InDesign CS6 (Windows)
Rendition Class                 : proof:pdf
Document ID                     : xmp.id:FF12A5310CC6E511A627D37D155E7482
Original Document ID            : xmp.did:516915126ECCE1118A0D8AD340C27D6B
Instance ID                     : uuid:4ffe963e-a70f-4308-af21-b991746e0da9
Derived From Rendition Class    : default
Derived From Instance ID        : xmp.iid:F327B9B4D4BBE511A020A6109D468A51
Derived From Document ID        : xmp.did:738DC2237AC7E4118C5DFE64B9FD57F1
Derived From Original Document ID: xmp.did:516915126ECCE1118A0D8AD340C27D6B
History Action                  : converted
History Software Agent          : Adobe InDesign CS6 (Windows)
History Parameters              : from application/x-indesign to application/pdf
History When                    : 2016:01:28 22:12:25.000Z
History Changed                 : /
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CS6 (Windows)
Keywords                        : closers;door, controls;medium, duty;1000, Series;aluminum;1450-18;1450-18PA;1450-18FC;1450-18PAFC;EDA;CUSH;push, side, mount;top, jamb;, pull, side, mount;PA, mount;

EXIF Metadata provided by EXIF.tools