LG CNS KSCCB400C BUS TICKETING SYSTEM(RFID) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1741270
Application ID	75ulFBHvFYAGq+p/5+IGnA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.62kB (820246 bits)
Date Submitted	2012-07-11 00:00:00
Date Available	2012-07-11 00:00:00
Creation Date	2012-07-05 20:13:38
Producing Software	Acrobat Distiller 9.4.2 (Windows)
Document Lastmod	2012-07-05 20:13:38
Document Title	Microsoft Word - ADV_TVM_ENG_MANUAL_SPEC_Guide-TVM__V1.0.0.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	JJ

Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
Bus Ticketing System(B400C)
Manual
(TVM)
Ver 1.0
Korea Smart Card Co., Ltd
This document is the property of Korea Smart Card Co., Ltd. and no part of this document
shall be copied or duplicated or given to other parties without written authorization
Copyright KSCC
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
Table of Contents
1.
TVM .............................................................................................................................................3
1.1 Introduction ........................................................................................................................................3
1.2 Caution ................................................................................................................................................3
1.3 Tool & Equipment ..............................................................................................................................3
1.4 Descriptions.........................................................................................................................................4
1.5 Block Diagram ....................................................................................................................................6
1.6 Specifications ......................................................................................................................................7
1.7 Main Modules .................................................................................................................................111
1.7.1 Cash Box .................................................................................................................................................... 111
1.7.2 Switching Mode Power Supply (SMPS) .................................................................................................... 122
1.7.3 CARD DISPENSER .................................................................................................................................. 133
1.7.4 BILL Module ............................................................................................................................................... 14
1.7.5 COIN Module .............................................................................................................................................. 16
1.7.6 Space Heater ................................................................................................................................................ 17
1.7.7 Other ............................................................................................................................................................ 17
Copyright KSCC
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
1. TVM
1.1 Introduction
This manual provides information on the use and the spec of the machine for the users.
1.2 Caution
1. Please read the manual carefully for safe use.
2. The machine must be kept in a cool area.
3. Use the proper devices or tools to dissemble the machine to prevent damage.
4. Be sure the power is off before dissembling the machine.
5. BEWARE: electric shock or other safety related accidents.
1.3 Tool &Equipment
1. Screwdriver, WrenchDriver(M8), Hexagon Wrench Driver(M5), L-Wrench Driver(M6)
, Torx WrenchDriver(M3)
2. USB (TVM version / CSC version)
3. SAM (TVM / CSC)
Copyright KSCC
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.4 Descriptions
DISPLAY
BUTTON
(BUY&CHARGE)
DISPLAY
RFID ANTTENA
BILL SLOT
COIN SLOT
CARD DISPENSER
REFUND COIN
CARD STACKER
COIN MODULE
CARD DISPENSER
CASH BOX
DISCARDED TICKET BOX
SMPS (TVM/CSC)
SMPS (TVM/CSC)
FRONT
Copyright KSCC
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
POWER SWITCH
EXTERNAL
INPUT/OUTPUT
REAR
Copyright KSCC
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
1.5 Block Diagram
Copyright KSCC
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
Copyright KSCC
System
for
rapidKL
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.6 Specifications
1.6.1 Specifications
No.
Category
TVM Main PCB
O.S.(Version)
Display PCB
-TVM-
Display PCB
-CSCCSC-T main PCB
Card Dispenser
Bill Accepter
Coin Accepter
SMPS(TVM)
SMPS(ETM)
10
Space Heater Unit
11
Speaker
Copyright KSCC
Detail
Samsung ARM9 core 32bit : S3C2440 400Mhz
Audio Codec
1x USB(host Ver 1.1)
4x SIMM slots
Volume S/W
Embedded Linux 2.6.2.1
DFSTN Negative Graphic LCD
Water Proof Button (2ea)
Buzzer
DFSTN Negative Graphic LCD
Buzzer
Samsung ARM9 core 32bit : S3C2440 400Mhz
Audio Codec
1x USB(host Ver 1.1)
8x SIMM slots
Volume S/W
200pcs(incase of 0.8mm only, flat card)
ISO 14443 AType / mifare
RS-232C
Discarded ticket processing
DC12V ±5% 850mA (Max 2.5A)
280mm(D) x 105mm(W) x 200mm(H)
Escrow = 1 Bill
Serial(RS232-based) /CCNET
DC12V / stand by:200mA,(Max: 2A)
Fast coin Acceptance up to 10 coin per seconds
Parallel, ccTalk, SGI
12V (standby 200mA , Coin acceptance 500mA)
IN : DC24V (DC20V - DC30V)
OUT : DC12V/7A
1x Battery DC12V
Power Fail signal
IN : DC24V (DC20V - DC30V)
OUT : DC12V/7A
1x Battery DC12V
Power Fail signal
DC 24V / 3.7A (90W)
180x60x60
2x 3W, 4Ω
Remarks
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
1.6.2 Temperature
Operating: 0℃ - +55℃
Humidity: 45% - 70%
1.6.3 Power Supply Requirements
Supply Voltage: DC24V (DC20V - DC30V)
Current Consumption
Stand-by: 1.1A
Operational: 1.7A (Max : 7A / Full load & Heater Unit)
1.6.4 Weight
Base Unit: 50Kg
Copyright KSCC
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.6.5 Mating Connector
1. RS232-1
Pin No.
Signal Description
DC12V(OUT)
UART_TX
UART_RX
GND
NC
2. RS232-2
Pin No.
Signal Description
DC12V(OUT)
UART_TX
UART_RX
GND
NC
3. RS-485
Pin No.
Signal Description
DC12V(OUT)
TVM 485+
TVM 485-
GND
4. ETM
Pin No.
Signal Description
DC12V(OUT)
DC5V(OUT)
UART_TX
UART_RX
ETM_12V
CSC 485+
CSC 485-
GND
Copyright KSCC
5. DC24V
10
Pin No.
Signal Description
DC24V(OUT)
GND
EARTH
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.6.6 TVM, CSC-T main PCB Names
CSC-T Debug
TVM LED
TVM Debug
TVM DIP Switch
TVM Volume Switch
(UP, DOWN)
CSC-T LED
CSC-T DIP Switch
TVM USB
LED Indicator
TVM
Copyright KSCC
CSC-T
11
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
1.7 Main Modules
1.7.1 Cash Box
Specifications
Size: 183mm(w) x 201mm(h) x 230mm(d)
Capacity: 400 (Free fall type)
Material: Stainless Steel
Key lock
3Keys
Caution: Be sure not to lose or misplace your cashbox key.
The cashbox may be damaged at shock or drop.
Be sure to understand the manual before installing
or removing the cashbox (refer to Cashbox Installation and Removal).
Copyright KSCC
12
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.7.2 Switching Mode Power Supply (SMPS)
Specifications
No.
Function
TVM
ETM
Power IN
Power OUT
Battery #2
LED(Green)
FUSE
Power Fail signal
Protection
DC24V (DC20V - DC30V)
DC12V/7A
1x DC12V
10A
Over Current
Over Voltage
DC24V (DC20V - DC30V)
DC12V/7A
1x DC12V
10A
Over Current
Over Voltage
#1.Do not share the power for TVM and ETM; make sure they are plugged in separately.
#2.When the input power is shut off, UPS kicks in by the backup battery.With the fully charged battery,
the system will be powered for about 5 minutes (However, it may be shorter depending on the battery life
or obsolete battery).
To prevent any damage or significantly lowered battery life from over-discharge, the battery output power
is automatically cut off when the power is not supplied within a certain period of time after the input power
is shut off.
#3.Be sure that the battery case is not worn off to facilitate the battery installation and removal.
Power out LED
TVM
ETM
FUSE
Copyright KSCC
13
IN/OUT
Connector
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.7.3 CARD DISPENSER
Specifications
1.
Card Type
Card Stack Capability
Function
Interface
Power
Size
ISO 14443 A Type / Mifare
200pcs (incase of 0.8mm only, flat card)
Discarded ticket processing
RS-232C
DC12V ±5% 850mA (Max 2.5A)
280mm (D) x 105mm (W) x 200mm (H)
Pin Connections
Pin Number
Signal Description
DC12V
RS232 TX
RS232 RX
GND
GND
NC
NC
NC
NC
1 2 3 4
Note
PC SUB-9pin (male)
6 7 8 9
Copyright KSCC
14
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.7.4 BILLMODULE
Specifications
Acceptable CashCode
Insertion Direction
Validation Method
Interface
Escrow
LED
Power Supply Voltage
Rated Power Consumption
Length: 92.5 mm
Width: 132 mm
HeIght : 100.6 mm
4-way
Optical/Transparency/Reflection/MAG
Serial
1 banknote
LED lamp (upper position of faceplate)
Full-color lightning (gradation/solid)
12V DC ±5 %
Standby: Approx. 0.1 A
Operation: Approx. 0.8 A
Max: Approx. 1.4 A (Max. 300 ms)
Connector
The following diagram is the interface connector as viewed from the acceptor side or from
a relay board.
1) Power Connector
Copyright KSCC
15
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
2) Data Connector
DIP Switch Settings
Copyright KSCC
16
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
The switches are located at the CPU board.
The VU(MVU) bill Validator operates in two basic modes: Validation Mode and
Service Mode.
Validation Mode: This is the mode for normal operation.
Service Mode: This is the mode for programming and testing.
A set of 8 DIP switches (SW1) defines the settings and programs the Bill Validator to
recognize and validate different denominations or define other parameters.
A set of 4 DIP switches (SW1) defines the settings of interface type.
For a complete explanation of switch description, please see the software User’s Guide
(enclosed to each bill validator and available at www.cashcode.com).
Copyright KSCC
17
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.7.5 COIN MODULE
Specifications
Function
Interface
Power
Operating range
Coin acceptance
Mounting position
Size
Mark of conformity
Copyright KSCC
Fast coin Acceptance up to 10 coin per seconds
Parallel, ccTalk, SGI
12V (standby 200mA , Coin acceptance 500mA)
0°C to 60°C ,
32 coin types max. in 2 x 16 or 1 x 32 channels
Coin diameter:15–32.5mm
Coin thickness:1.5–3.3mm
Speed:10 coins/sec.
Vertical, max. deviation: ± 2°
102mm (D) x 89mm (W) x 52mm (H)
CE
18
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Connector
Copyright KSCC
19
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
1.7.6 Space heater
Specifications
Copyright KSCC
Function
Power
Operating range
Serface Temp
Space Heating
24V / 3.7A (90W)
Analog SW : -20°C to 50°C ,
Arround : 23°C , End of heater 50°C ,
20
Manual(SPEC)
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
1.7.7 Others
Power S/W
GENERAL (Subpart A)
Any changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
UNINTENTIONAL RADIATORS (Part15, Subpart B, 15.105)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
① Reorient or relocate the receiving antenna.
② Increase the separation between the equipment and receiver.
③ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
④ Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
Copyright KSCC
21
Cashless Bus Ticketing
Buses(KSCC-B400C)
System
for
rapidKL
Manual(SPEC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications (including the antenna) made to this device that are not expressly
approved by the manufacturer may void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Copyright KSCC
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : JJ
Create Date                     : 2012:07:05 20:13:38+09:00
Modify Date                     : 2012:07:05 20:13:38+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.4.2 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - ADV_TVM_ENG_MANUAL_SPEC_Guide-TVM__V1.0.0.doc
Creator                         : JJ
Document ID                     : uuid:3e386d85-ad6b-4f2c-a4a5-ce922898ca43
Instance ID                     : uuid:b8621d22-5736-44ec-b0ce-56ba02a19d5b
Page Count                      : 22

EXIF Metadata provided by EXIF.tools