LG Electronics USA 37LDBT LCD TV/Monitor User Manual MFL34797004 Edit1

LG Electronics USA LCD TV/Monitor MFL34797004 Edit1

Contents

Users Manual 2

EXTERNAL EQUIPMENT SETUP20VCR SETUPEXTERNAL EQUIPMENT SETUPWhen connecting with an antenna■To avoid picture noise (interference), leave an adequate distance between the VCR and TV■Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long periodof time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible onthe screen. This phenomenon is common to all manufactures and in consequence the manufactures warrantydoes not cover the product bearing this phenomenon.HDMI/DVI IN ANTENNA/CABLE INREMOTECONTROL INRS-232C IN(CONTROL & SERVICE)RGB IN(PC)AUDIO IN(RGB/DVI)DIGITAL AUDIO OUTOPTICAL12VIDEOS-VIDEOL RS-VIDEO VIDEOOUTPUTSWITCHANT INANT OUTVIDEOAUDIO( )AUDIO( )Wall JackAntenna12Connect the RF antenna out socket of the VCR to the AAnntteennnnaasocket on the set.Connect the antenna cable to the RF antenna in socket of the VCR.1. How to connect■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)2. How to use21
EXTERNAL EQUIPMENT SETUP21GGDo not connect to both Videoand S-Video at the same time. Inthe event that you connect bothVideo and the S-Video cables,only the S-Video will work.CAUTIONWhen connecting with a RCA cableGGThe picture quality is improved: compared to normalcomposite (RCA cable) input.NOTE!NDIGITAL AUDIO OUTOPTICALCOMPONENT IN AV OUTAV IN 1S-VIDEOVIDEOAUDIOVIDEOAUDIOMONO( )L RS-VIDEO VIDEOOUTPUTSWITCHANT INANT OUTAUDIO( )VIDEOAUDIO( )L RS-VIDEO VIDEOOUTPUTSWITCHANT INANT OUTDIGITAL AUDIO OUTOPTICALCOMPONENT IN AV OUTVIDEOAUDIOAV IN 1VIDEOS-VIDEO AUDIOMONO( )Connect the AAUUDDIIOO/VVIIDDEEOOjacks between TV andVCR. Match the jack colors (Video = yellow, Audio Left= white, and Audio Right = red)1. How to connect2. How to use■Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)■Select AAVV11input source with using the IINNPPUUTTbutton onthe remote control.■If connected to AAVV IINN22, select AAVV22 input source.When connecting with an S-Video cableConnect the S-VIDEO output of the VCR to theSS--VVIIDDEEOO input on the set.Connect the audio outputs of the VCR to the AAUUDDIIOOinput jacks on the set.1. How to connect2. How to use■Insert a video tape into the VCR and press PLAY on the VCR.(Refer to the VCR owner’s manual.)■Select AAVV11input source with using the IINNPPUUTTbutton onthe remote control.■If connected to AAVV IINN22, select AAVV22 input source.121GGIf you have a mono VCR, con-nect the audio cable from theVCR to the AAUUDDIIOOLL//MMOONNOOjack of the set.NOTE!112
EXTERNAL EQUIPMENT SETUP22OTHER A/V SOURCE SETUPEXTERNAL EQUIPMENT SETUPAV IN 2L/MONORAUDIOVIDEOS-VIDEOL RVIDEOCamcorderVideo Game SetConnect the AAUUDDIIOO/VVIIDDEEOOjacksbetween TV and external equipment.Match the jack colors.(Video = yellow, Audio Left = white, andAudio Right = red)1. How to connect2. How to use■Select AAVV22 input source with using theIINNPPUUTTbutton on the remote control.■If connected to AAVV IINN11input, select AAVV11input source.■Operate the corresponding external equipment.11GGThis TV finds the connected input sources automati-cally for AV1, AV2, Component 1-2, RGB,HDMI1/DVI and HDMI2 sources are connected.NOTE!
EXTERNAL EQUIPMENT SETUP23PC SETUPThis TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cableGGCheck the image on your TV. There may be noise associ-ated with the resolution, vertical pattern, contrast orbrightness in PC mode. If noise is present, change the PCoutput to another resolution, change the refresh rate toanother rate or adjust the brightness and contrast on theVIDEO menu until the picture is clear. If the refresh rateof the PC graphic card can not be changed, change thePC graphic card or consult the manufacturer of the PCgraphic card.NOTE!RGB OUTPUTAUDIOHDMI/DVI IN REMOTECONTROL INRS-232C IN(CONTROL & SERVICE)RGB IN(PC)AUDIO IN(RGB/DVI)DIGITAL AUDIOOUTOPTICAL12ERVICEConnect the RGB output of the PC to the RRGGBB IINN((PPCC)) jack on the set.Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB//DDVVII))jack on the set.1. How to connect2. How to use■Turn on the PC and the set.■Select RRGGBB--PPCCinput source in main input option ofSETUP menu. ((GG pp..6677))2112
EXTERNAL EQUIPMENT SETUP24EXTERNAL EQUIPMENT SETUPWhen connecting HDMI to DVI cableANTENNA/CABLE INREMOTECONTROL RS-232C IN(CONTROL & SERVICERGB IN(PC)AUDIO IN(RGB/DVI)SERVICEHDMI/DVI IN 12DVI-PC OUTPUT AUDIO12GGIf the PC has a DVI output and no HDMI output, a sepa-rated audio connection is necessary.GGIf the PC does not support Auto DVI, you need to set theoutput resolution appropriately. To get the best picturequality, adjust the output resolution of PC graphics card'soutput resolution to 1024x768, 60Hz.NOTE!Connect the DVI output of the PC to the HHDDMMII//DDVVIIIINN 11or 22 jack on the set.Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB//DDVVII))jack on the set.1. How to connect2. How to use■Turn on the PC and the set■Select HHDDMMII11//DDVVIIor HHDDMMII22 input source with usingthe IINNPPUUTTbutton on the remote control.21
EXTERNAL EQUIPMENT SETUP25GGTo get the the best picture quality, adjust the PCgraphics card to 1024x768, 60Hz.GGDepending on the graphics card, DOS mode maynot work if a HDMI to DVI Cable is in use.GGWhen Source Devices are connected withHDMI/DVI Input, the output PC Resolution (VGA,SVGA, XGA, WXGA), Position and Size may not fiton the Screen. Press the ADJUST button to adjustthe screen Position of the TV SET and contact aPC graphics card service center.GGWhen Source Devices connected with HDMI/DVIInput, output TV SET Resolution (480p, 720p,1080i, 1080p) and TV SET Display fit EIA/CEA-861-B Specification to Screen. If not, refer to theManual of HDMI/DVI Source Devices or contactyour service center.GGIf the HDMI/DVI Source Device is not connectedto the Cable or if there is a poor cable connec-tion, "No signal" is displayed in the HDMI/DVIInput. In this case, that Video Resolution is notsupported. If "Invalid Format" is displayed, refer tothe Source Device manual or contact your servicecenter.GGAvoid keeping a fixed image on the screen for along period of time. The fixed image may becomepermanently imprinted on the screen.GGThe synchronization input form for Horizontaland Vertical frequencies is separate.NOTES!RGB-PC, HDMI1/DVI-PC mode Horizontal Vertical Frequency(KHz)Frequency(Hz)31.469 70.0831.469 70.0831.469 59.9437.879 60.3148.363 60.0047.776 59.8747.720 59.79947.130 59.65Resolution 720x4001360x768640x350* RGB-PC mode only: 640x350, 720X400640x480800x6001024x768HDMI1/DVI-DTV, HDMI2-DTV modeHorizontal Vertical Frequency(KHz)Frequency(Hz)31.469 59.9431.500 60.0044.960 59.9445.000 60.0033.720 59.9433.750 60.0027.000 24.0033.750 30.00Resolution 720x4801280x7201920x1080i1920x1080p1280x7681366x768Supported Display Specifications
EXTERNAL EQUIPMENT SETUP26EXTERNAL EQUIPMENT SETUPScreen Setup for PC modeOverviewWhen RGB connect to PC output and select the RGB-PC in Inputsource, this function is used.When HDM/DVI connect to PC output and select HDMI/DVI input,this function is used.After connecting RGB-PC or HDMI/DVI to PC input and checking thescreen quality.When you change the resolution, select the proper resolution in pre-sent input to see the best picture appearance.Adjustment for screen Resolution, Position, Size,and PhasePress the AADDJJUUSSTTbutton and then use DD or EEbutton toselect RReessoolluuttiioonn, PPoossiittiioonn, SSiizzee, or PPhhaassee.Press the EENNTTEERRbutton and then use DD EE FFGG button tomake appropriate adjustments.■The PPhhaasseeadjustment range is --1166 ~++1166.In HDMI/DVI-PC mode, PPhhaassee is not available.■The SSiizzeeadjustment range is --3300 ~++3300.In HDMI/DVI-PC mode, SSiizzeeis not available.Press the EENNTTEERRbutton.Initializing (Reset to original factory values)Press the AADDJJUUSSTTbutton and then use DD or EEbutton toselect RReesseett.Press the EENNTTEERR button and then use FFor GG button toselect YYeess.Press the EENNTTEERRbutton.To initialize the adjusted valuesADJUSTSAPSOUNDPICTURECC123123RReessoolluuttiioonnThis function allows you selectresolution of XGA/WXGA.PPoossiittiioonnThis function is to adjust picture toleft/right and up/down as you prefer.SSiizzeeThis function is to minimize any ver-tical bars or stripes visible on thescreen background. And the hori-zontal screen size will also change. PPhhaasseeThis function allows you toremove any horizontal noise andclear or sharpen the image of char-acters.1231231024 x 7681280 x 7681360 x 7681366 x 768CloseClose
EXTERNAL EQUIPMENT SETUP27AV OUT SETUPThe TV has a special signal output capability which allows you to hook up the second TV or monitor.L R S-VIDEOVIDEOL AUDIO UTICALNT IN AV OUTAV IN 1VIDEOAUDIOMONO( )S-VIDEOConnect the second TV or monitor to the TV’s AAVV OOUUTTjacks. See the Operating Manual of the second TV or monitorfor further details regarding that device’s input settings.1. How to connectGGComponent1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV inputsources cannot be used for AV out.GGWe recommend to use the AV OUT jacks for VCR recording.NOTE!211Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical)port.REMOTECONTROL INRS-232C IN(CONTROL & SERVICE)(PC)AUDIO IN(RGB/DVI)VIDEOS-VIDEODIGITAL AUDIO OUTOPTICALGGWhen connecting with external audio equipments, such as ampli-fiers or speakers, please turn the TV speakers off. (GG pp..8844)NOTE!GGDo not look into the optical output port. Looking at thelaser beam may damage your vision.CAUTIONConnect one end of an optical cable to the TV DigitalAudio (Optical)Output port.Connect the other end of the optical cable to thedigital audio (optical)input on the audio equipment.Set the “TV Speaker option - Off” in the AUDIOmenu. (GGpp..8844). See the external audio equipmentinstruction manual for operation.1. How to connect23112DIGITAL AUDIO OUTPUT
WATCHING TV / CHANNEL CONTROL28REMOTE CONTROL FUNCTIONSWATCHING TV / CHANNEL CONTROL1 2 3 4 5 6 7809 BACKVOL CHMUTEFAVBRIGHT -MENUBRIGHT +ENTEREXITTIMERRATIOSIMPLINKPOWERVCRTVDVDAUDIOCABLESTBMODETV INPUTINPUTMODEMENUBRIGHT -/ +THUMBSTICK(Up/Down/LeftRight/ENTER)EXITTIMERRATIOSIMPLINK VOLUME UP/DOWNMUTEFAVCHANNELUP/DOWN— (DASH)BACKSelect the remote operating mode: TV, DVD, VCR,AUDIO, CABLE or STB. Control video cassette recorders or DVD players.Displays the main menu. Adjust the brightness on screen.It turns to the default settings brightness by changingmode source.Navigate the on-screen menus and adjust the system set-tings to your preference.Clear all on-screen displays and return to TV viewingfrom any menu.Select the amount of time before your TV turns off auto-matically. GGpp..9900Change the aspect ratio. GGpp..9922--9933C? GGpp..9922--9933Increase/decrease the sound level.Switch the sound on or off. GGpp..3388Scroll through the programmed Favorite channels.Select available channels.Used to enter a program number for multiple programchannels such as 2-1, 2-2, etc.Tune to the last channel viewed.VCR/DVD control buttonsNUMBER buttonWhen using the remote control, aim it at the remote control sensor on the TV.Illuminates the remote controlbuttons of selected mode.LIGHT
WATCHING TV / CHANNEL CONTROL29ADJUSTSAPSOUNDPICTURECC1 2 3 4 5 6 7809 BACKPOWERTV INPUTINPUTTurns your TV or any other programmed equipment on or off, depending on the mode.In AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources,screen returns to the last TV channel.External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI and HDMI2.(AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources arelinked automatically, only if these are connected.)PICTURESOUNDSAPCCADJUSTAdjust the factory preset picture depend onthe viewing environment. GGpp..6699Select the appropriate type of sound for typeof program. GGpp..8800Analog mode: Selects MTS sound (Mono,Stereo, and a SAP)DTV mode: Change the audio language.Select a closed caption. GGpp..9944(*In DTV/CADTV mode GGpp..9955)Adjust the screen position, size and phase inPC mode. GGpp..Inside the Sliding Cover■Open the battery compartment cover on the backside and install the batteries matching correctpolarity (+with +,-with -).■Install two 1.5V AA batteries. Don’t mix old orused batteries with new ones.■Close cover.■Use a remote control up to 7 meters distanceand 30 degree (left/right) within the receivingunit scope.■Dispose of used batteries in a recycle bin topreserve environment.BRIGHT -MENUBRIGHT +POWERVCRTVDVDAUDIOCABLESTBMODETV INPUTINPUTRBRIGHT -MENUBRIGHT +POWERVCRTVDVDAUDIOCABLESTBMODETV INPUTINPUTInstalling Batteries Remote control effective range
WATCHING TV / CHANNEL CONTROL30TURNING ON TVWATCHING TV / CHANNEL CONTROLNOTE!GGIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.GGWhen the TV is turned on, the indicator will blink green before the picture is seen.First, connect power cord correctly. At this moment, the TV switches to standby mode.■In standby mode to turn TV on, press the , IINNPPUUTT,CCHH ((DD or EE))button on the TV or press the PPOOWWEERR, IINNPPUUTT, TTVV IINNPPUUTT, CCHH((DD orEE)), NNuummbbeerr ((00~99))button on the remote control.Select the viewing source by using the TTVV IINNPPUUTT, IINNPPUUTTbutton on theremote control.■This TV is programmed to remember which power state it was last setto, even if the power cord is out.When finished using the TV, press the PPOOWWEERRbutton on the remotecontrol. The TV reverts to standby mode.POWERVCRTVDVDMODETV INPUT INPUTSAPSOUNDPICTURECC1234567809BACKVOL CHMUTEFAVEXITTIMERRATIOSIMPLINK123SAPSOUNDPICTURECC1234567809BACKVOL CHMUTEFAVEXITTIMERRATIOSIMPLINKPress the CCHHDD EE or NNUUMMBBEERRbuttons to select a channel number.1VOLUME ADJUSTMENTCHANNEL SELECTIONPress the VVOOLLDD or EE button to adjust the volume.If you want to switch the sound off, press the MMUUTTEEbutton. You can cancel the Mute function by pressing the MMUUTTEEor VVOOLLDD or EEbutton.123456VOL CHMUTEFAVEXITTIMERRATIOSIMPLINKAdjust the volume to suit your personal preference.123
WATCHING TV / CHANNEL CONTROL31ON-SCREEN MENUS SELECTIONPress the MMEENNUUbutton and then use DD or EE button to select the each menu.Press the GG button and then use DD EE FF GG button to display the available menus.Your TV's OSD (On Screen Display)may differ slightly from what is shown in this manual.SETUP VIDEOOPTIONLOCKTIMEEZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet IDEZ PictureColor TemperatureXDAdvancedVideo ResetAuto ClockManual ClockOff TimerOn TimerSleep TimerAuto OffAspect RatioCaption/TextCaption OptionLanguageISM MethodLow PowerAUDIOAudio LanguageEZ SoundBalanceTV SpeakerLock SystemSet PasswordBlock ChannelMovie RatingTV Rating-ChildrenTV Rating-GeneralInput Block21Lock SystemSet PasswordBlock ChannelTV Rating-EnglishTV Rating-FrenchInput BlockFor USA For Canada
WATCHING TV / CHANNEL CONTROL32AUTO SCAN (EZ SCAN)WATCHING TV / CHANNEL CONTROLPress the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect EEZZ SSccaann.Press the EENNTTEERRbutton to begin the channel search.Allow EEZZ SSccaannto complete the channel search cyclefor AANNTTEENNNNAAand CCAABBLLEE.Automatically finds all channels available through antennaor cable inputs, and stores them in memory on the channellist. Run EZ Scan again after any Antenna/Cable connectionchanges. A password is required to gain access to EZ Scan menu ifthe Lock System is turned on.EZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet IDEZ Scan GManual ScanChannel EditDTV SignalInput SourceInput LabelSet IDSelection ( Gor ) leads you to the EZ scan screen.EZ Scan GManual ScanChannel EditDTV SignalInput SourceInput LabelSet IDSelection ( Gor ) leads you to the EZ scan screen.231Processing EZ scan...ANTENNA Ch.200 channel(s) foundPress to stop thecurrent scan and startDIGITAL ANTENNA channelscan.MENU PreviousNext123BRIGHT -BRIGHT +ENTERTIMERRATIOSIMPLINKPOWERVCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTEXITMENU
WATCHING TV / CHANNEL CONTROL33ADD/DELETE CHANNEL (MANUAL SCAN)A password is required to gain access to Manual Scanmenu if the Lock System is turned on.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect MMaannuuaall SSccaann.Press the GG button and then use DD or EE button toselect TTVV, DDTTVV, CCAATTVV, and CCAADDTTVV.Press the GG button and then use DD or EE button toselect channel you want to add or delete.Press the EENNTTEERRbutton to add or delete the channel.Press the EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.BRIGHT -BRIGHT +ENTERTIMERRATIOSIMPLINKPOWERVCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTEXITMENUEZ ScanManual Scan GChannel EditDTV SignalInput SourceInput LabelSet IDSelect channel type and RF-channel number.TV 2EZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet IDEZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet ID214365Select channel type and RF-channel number.TV GG2Press to delete the channel.TV 2-0DDEE123 4 5
WATCHING TV / CHANNEL CONTROL34CHANNEL EDITINGWATCHING TV / CHANNEL CONTROLThere are two different ways in order to add or deletescanned channels. One is "Custom List" and the other is"Favorite List" in the channel list. Both of them are availableafter EZ Scan on the SETUP menu. A Custom List can be created by toggling each channel onor off with ENTER button. The channels in the Custom Listare displayed in black color, and the channels deleted fromthe Custom List are displayed in gray color. Once a channelis highlighted you can add or delete the channel by referringto the small window at the top-left corner of the screen.You can create your own Favorite List. Use the FFAAVVbuttonon the remote control when a channel is highlighted andthen add or delete the channel to/from your Favorite List.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect CChhaannnneell EEddiitt.Press the GG button. You will now see a screen filledwith channel numbers and a preview picture. Use DD EE FFGG button to select a channel and thenuse the EENNTTEERRbutton to add or delete it. Press FFAAVVbutton to add the channel to the Favorite List.The heart-mark will appear in front of that channelnumber.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.BRIGHT -BRIGHT +ENTERTIMERRATIOSIMPLINKPOWERVCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTEXITMENUEZ ScanManual ScanChannel Edit GDTV SignalInput SourceInput LabelSet IDSelection ( Gor ) leads you to the channel editscreen.EZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet ID21435123 4
WATCHING TV / CHANNEL CONTROL35DTV SIGNAL STRENGTHThis feature displays the DTV signal levels being receivedand indicates whether you need to adjust your antenna ordigital cable input. The higher the signal strength, the lesslikely you are to experience picture degradation.DTV Signal: This function is only available when the inputsignal is DTV or CADTV.Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect DDTTVV SSiiggnnaall..View the on-screen signal strength monitor to seethe quality of the signal being received.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.BRIGHT -BRIGHT +ENTERTIMERRATIOSIMPLINKPOWERVCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTEXITMENUEZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet IDBad Normal GoodEZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet ID234112 3
WATCHING TV / CHANNEL CONTROL36INPUT SOURCE SELECTIONWATCHING TV / CHANNEL CONTROLChanges the picture source so you can watch your off-airTV, cable TV, VCR, DVD, or any other devices that are con-nected to your TV. Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect IInnppuutt SSoouurrccee..Press the GG button and then use DD or EE button toselect the source: TTVV, AAVV11, AAVV22, CCoommppoonneenntt11,CCoommppoonneenntt22, RRGGBB--PPCC, HHDDMMII11//DDVVII, or HHDDMMII22.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.EZ ScanManual ScanChannel EditDTV SignalInput Source GInput LabelSet IDTVAV1AV2Component1Component2RGB-PCHDMI1/DVIHDMI2EZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet ID234112 3BRIGHT -BRIGHT +ENTERTIMERRATIOSIMPLINKPOWERVCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTEXITMENU
WATCHING TV / CHANNEL CONTROL37INPUT LABELSets a label to each input source which is not in use whenyou press the INPUT button. Press the MMEENNUUbutton and then use DD or EE buttonto select the SSEETTUUPPmenu.Press the GG button and then use DD or EE button toselect IInnppuutt LLaabbeell.Press the GG button and then use DD or EE button toselect the source: AAVV11, AAVV22,CCoommppoonneenntt11,CCoommppoonneenntt22, RRGGBB--PPCC, HHDDMMII11//DDVVIIor HHDDMMII22.Press the FF or GG button to select the label.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.EZ ScanManual ScanChannel EditDTV SignalInput SourceInput Label GSet IDAV1 Cable BoxAV2 VCRComponent1 DVDComponent2 Set Top BoxRGB-PC PCHDMI1/DVI GameHDMI2 SatelliteEZ ScanManual ScanChannel EditDTV SignalInput SourceInput LabelSet ID2345113 42BRIGHT -BRIGHT +ENTERTIMERRATIOSIMPLINKPOWERVCRTVDVDAUDIOCABLESTBMODETV INPUT INPUTEXITMENU
WATCHING TV / CHANNEL CONTROL38WATCHING TV / CHANNEL CONTROLThis Enables you to control and play other AV devices con-nected to TV through HDMI cable without additional cablesand settings.In order to control AV devices connected to TV withoutSimplink, user had to switch the input mode of TV and useadditional remote control bundled to the AV devices.Simplink provides an easy solution to control all connecteddevices with one remote control.123456VOL CHMUTEFAVBRIGHT -MENUBRIGHT +ENTEREXITTIMERRATIOSIMPLINKPress the MMEENNUUbutton and then use DD or EE buttonto select the OOPPTTIIOONNmenu.Press the GG button and then use DD or EEbutton toselect SSiimmppLLiinnkk.Press the GG button and then use DD or EEbutton toselect OOnnor OOffff.Press EEXXIITTbutton to return to TV viewing or pressMMEENNUUbutton to return to the previous menu.NOTE!GGWhile Auto Tuning is proceeding, Simplink does notwork.GGExcept Auto Tuning, Simplink stops the current activityor clears Display OSD on the screen. After Simplinkworkes, only Info. OSD resumes the display.GGWhile Menu, XSTUDIO is proceeding, Simplink doesnot work.23412 3 41Aspect RatioCaption/TextCaption OptionLanguageISM MethodLow PowerSimpLinkAspect RatioCaption/TextCaption OptionLanguageISM MethodLow PowerSimpLink GOffOn
WATCHING TV / CHANNEL CONTROL39AV devices supporting SimpLink■DDVVDD PPllaayyeerr HH//TT : DVD player embeddedH/T device.■HHDDDD eemmbbeeddddeedd DDVVDD RReeccoorrddeerr ((RRHH)) : DVD recorder with HDD.■DDVVDD RReeccoorrddeerr CCoommbboo((RR--CCoommbbii)) : DVD Recorder integrating VCR.■DDVVDD PPllaayyeerr : Pre-recorded discs playback only.■RReeccoorrddiinngg//DDiisscc ppllaayybbaacckk ::Control connected AV devices by pressing the DD EE FF GG, EENNTTEERRbuttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.■DDiirreecctt PPllaayy ::After connecting AV devices to TV, you can directly control the devices and playmedia without additional settings.■SSeelleecctt AAVV ddeevviiccee ::Enables you to select one of AV devices connected to TV and play it.■PPoowweerr ooffff aallll ddeevviicceess ::When you power off TV, all connected devices are turned off.■SSwwiittcchh aauuddiioo--oouutt ::Offers an easy way to switch audio-out.(A device, which is connected to TV through HDMI cable but does not support Simplink, doesnot provide this function)SimpLink Menu TTVV vviieewwiinngg: Switch to the previous TV channel regardless of the current mode.DDIISSCC ppllaayybbaacckk: Select and play connected discs.When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.VVCCRR ppllaayybbaacckk: Play and control the connected VCR.HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk: Play and control recordings stored in HDD.AAuuddiioo OOuutt ttoo HHoommee tthheeaattrree//AAuuddiioo OOuutt ttoo TTVV: Select Home theatre or TV speaker for Audio Out.Simplink Functions12345GGSelected DeviceGGWhen no device is connected(displayed in gray)GGWhen a device is connected(displayed in bright color)12345

Navigation menu