LG Electronics USA 37LDBT LCD TV/Monitor User Manual MFL34797004 Edit1

Download:
Mirror Download [FCC.gov]
Document ID	748104
Application ID	HRN8j+e3wcD66w6mYAl9lg==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	138.22kB (1727799 bits)
Date Submitted	2007-01-17 00:00:00
Date Available	2007-01-17 00:00:00
Creation Date	2007-01-11 20:19:06
Producing Software	Acrobat Distiller 4.0.5 for Macintosh
Document Lastmod	2007-01-11 20:19:35
Document Title	MFL34797004-Edit1
Document Creator	3.3: LaserWriter 8 8.7.1
Document Author:	sun

EXTERNAL EQUIPMENT SETUP
VCR SETUP
VIDEO
AUDIO
To avoid picture noise (interference), leave an adequate distance between the VCR and TV
■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on
the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty
does not cover the product bearing this phenomenon.
■
When connecting with an antenna
EXTERNAL EQUIPMENT SETUP
RGB IN
(PC)
HDMI/DVI IN
REMOTE
AUDIO IN
(RGB/DVI) CONTROL IN
ANTENNA/
CABLE IN
OPTICAL
S-VIDEO
VIDEO
ANT OUT
RS-232C IN
(CONTROL & SERVICE)
DIGITAL AUDIO
OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
Wall Jack
Antenna
1. How to connect
Connect the RF antenna out socket of the VCR to the A n t e n n a socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
2. How to use
■
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
■
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
AUDIO
20
VIDEO
(
VIDEO
When connecting with a RCA cable
1. How to connect
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
AUDIO
Select A V 1 input source with using the I N P U T button on
the remote control.
■ If connected to A V I N 2, select A V 2 input source.
■
OPTICAL
(MONO)
DIGITAL AUDIO
OUT
S-VIDEO
VIDEO
AUDIO
AV IN 1
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
! NOTE
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O
L / M O N O jack of the set.
When connecting with an S-Video cable
1. How to connect
Connect the S-VIDEO output of the VCR to the
S - V I D E O input on the set.
Connect the audio outputs of the VCR to the A U D I O
input jacks on the set.
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
VIDEO
AUDIO
2. How to use
■
Select A V 1 input source with using the I N P U T button on
the remote control.
OPTICAL
DIGITAL AUDIO
OUT
If connected to A V I N 2, select A V 2 input source.
The picture quality is improved: compared to normal
composite (RCA cable) input.
VIDEO
AUDIO
CAUTION
! NOTE
(MONO)
S-VIDEO
AV IN 1
■
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
AV OUT
■
COMPONENT IN
ANT IN
EXTERNAL EQUIPMENT SETUP
■
AV OUT
2. How to use
COMPONENT IN
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
VIDEO
AUDIO
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
21
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
1. How to connect
VIDEO
2. How to use
■
■
Select A V 2 input source with using the
I N P U T button on the remote control.
If connected to A V I N 1 input, select A V 1
input source.
Operate the corresponding external equipment.
This TV finds the connected input sources automatically for AV1, AV2, Component 1-2, RGB,
HDMI1/DVI and HDMI2 sources are connected.
AV IN 2
S-VIDEO
■
VIDEO L/MONO AUDIO R
EXTERNAL EQUIPMENT SETUP
V I D E O jacks
Connect the A U D I O/V
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
! NOTE
22
Video Game Set
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
ERVICE
RGB IN
(PC)
When connecting D-sub 15pin cable
1. How to connect
HDMI/DVI IN
REMOTE
AUDIO IN
(RGB/DVI) CONTROL IN
Connect the PC audio output to the A U D I O I N
( R G B / D V I) jack on the set.
OPTICAL
RS-232C IN
(CONTROL & SERVICE)
2. How to use
■
■
Turn on the PC and the set.
Select R G B - P C input source in main input option of
SETUP menu. ( G p.67)
! NOTE
AUDIO
DIGITAL AUDIO
OUT
EXTERNAL EQUIPMENT SETUP
Connect the RGB output of the PC to the R G B I N
( P C) jack on the set.
RGB OUTPUT
Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC
output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the
VIDEO menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of the PC
graphic card.
23
EXTERNAL EQUIPMENT SETUP
When connecting HDMI to DVI cable
1. How to connect
EXTERNAL EQUIPMENT SETUP
Connect the DVI output of the PC to the H D M I / D V I
I N 1 or 2 jack on the set.
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the set.
SERVICE
RGB IN
(PC)
HDMI/DVI IN
REMOTE
AUDIO IN
(RGB/DVI) CONTROL
ANTENNA/
CABLE IN
RS-232C IN
(CONTROL & SERVICE
2. How to use
■
■
Turn on the PC and the set
Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.
! NOTE
24
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
If the PC does not support Auto DVI, you need to set the
output resolution appropriately. To get the best picture
quality, adjust the output resolution of PC graphics card's
output resolution to 1024x768, 60Hz.
DVI-PC OUTPUT
AUDIO
! NOTES
To get the the best picture quality, adjust the PC
graphics card to 1024x768, 60Hz.
Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
When Source Devices are connected with
HDMI/DVI Input, the output PC Resolution (VGA,
SVGA, XGA, WXGA), Position and Size may not fit
on the Screen. Press the ADJUST button to adjust
the screen Position of the TV SET and contact a
PC graphics card service center.
When Source Devices connected with HDMI/DVI
Input, output TV SET Resolution (480p, 720p,
1080i, 1080p) and TV SET Display fit EIA/CEA861-B Specification to Screen. If not, refer to the
Manual of HDMI/DVI Source Devices or contact
your service center.
If the HDMI/DVI Source Device is not connected
to the Cable or if there is a poor cable connection, "No signal" is displayed in the HDMI/DVI
Input. In this case, that Video Resolution is not
supported. If "Invalid Format" is displayed, refer to
the Source Device manual or contact your service
center.
Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal
and Vertical frequencies is separate.
Supported Display Specifications
EXTERNAL EQUIPMENT SETUP
HDMI1/DVI-DTV, HDMI2-DTV mode
RGB-PC, HDMI1/DVI-PC mode
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
640x350
31.469
70.08
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1280x768
47.776
59.87
1360x768
47.720
59.799
1366x768
47.130
59.65
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480
31.469
31.500
59.94
60.00
1280x720
44.960
45.000
59.94
60.00
1920x1080i
33.720
33.750
59.94
60.00
1920x1080p
27.000
33.750
24.00
30.00
* RGB-PC mode only: 640x350, 720X400
25
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
PICTURE
SOUND
CC
SAP
ADJUST
Overview
EXTERNAL EQUIPMENT SETUP
When RGB connect to PC output and select the RGB-PC in Input
source, this function is used.
When HDM/DVI connect to PC output and select HDMI/DVI input,
this function is used.
After connecting RGB-PC or HDMI/DVI to PC input and checking the
screen quality.
When you change the resolution, select the proper resolution in present input to see the best picture appearance.
Adjustment for screen Resolution, Position, Size,
and Phase
1024 x 768
1280 x 768
1360 x 768
1366 x 768
Press the A D J U S T button and then use D or E button to
select R e s o l u t i o n, P o s i t i o n, S i z e, or P h a s e.
Press the ENTER button and then use D E F G button to
make appropriate adjustments.
■ The P h a s e adjustment range is - 1 6 ~ + 1 6.
In HDMI/DVI-PC mode, Phase is not available.
■ The S i z e adjustment range is - 3 0 ~ + 3 0.
In HDMI/DVI-PC mode, S i z e is not available.
Press the ENTER button.
Initializing (Reset to original factory values)
Close
Resolution This function allows you select
resolution of XGA/WXGA.
Position This function is to adjust picture to
left/right and up/down as you prefer.
Size
This function is to minimize any vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
Phase
This function allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
To initialize the adjusted values
Press the A D J U S T button and then use D or E button to
select R e s e t.
Press the ENTER button and then use F or G button to
select Y e s.
26
Press the ENTER button.
Close
AV OUT SETUP
The TV has a special signal output capability which allows you to hook up the second TV or monitor.
NT IN
1. How to connect
ICAL
L AUDIO
UT
(MONO)
S-VIDEO
VIDEO
AUDIO
! NOTE
Component1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV input
sources cannot be used for AV out.
We recommend to use the AV OUT jacks for VCR recording.
VIDEO
S-VIDEO
DIGITAL AUDIO OUTPUT
EXTERNAL EQUIPMENT SETUP
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
AV IN 1
Connect the second TV or monitor to the TV’s AV OUT
jacks.
AV OUT
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.
1. How to connect
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
Set the “TV Speaker option - Off” in the AUDIO
menu. (G p . 8 4). See the external audio equipment
instruction manual for operation.
(PC)
REMOTE
AUDIO IN
(RGB/DVI) CONTROL IN
OPTICAL
RS-232C IN
(CONTROL & SERVICE)
DIGITAL AUDIO
OUT
S-VIDEO
VIDEO
! NOTE
When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p . 8 4)
CAUTION
Do not look into the optical output port. Looking at the
laser beam may damage your vision.
27
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
MODE Select the remote operating mode: TV, DVD, VCR,
AUDIO, CABLE or STB.
INPUT
TV INPUT
POWER
VCR/DVD Control video cassette recorders or DVD players.
control buttons
MENU Displays the main menu.
BRIGHT -/ +
AUDIO
Adjust the brightness on screen.
It turns to the default settings brightness by changing
mode source.
WATCHING TV / CHANNEL CONTROL
HT -
BRIG
MENU
VCR
STB
BRIG
HT +
THUMBSTICK Navigate the on-screen menus and adjust the system set(Up/Down/Left tings to your preference.
Right/ENTER)
ENTER
EXIT Clear all on-screen displays and return to TV viewing
from any menu.
TIMER Select the amount of time before your TV turns off automatically. G p . 9 0
EXIT
INK
TIMER
RATIO
SIMPL
RATIO Change the aspect ratio. G p.92-93
VOL
MUTE
FAV
CH
SIMPLINK C? G p.92-93
VOLUME UP Increase/decrease the sound level.
/DOWN
MUTE Switch the sound on or off. G p.38
FAV Scroll through the programmed Favorite channels.
CHANNEL Select available channels.
UP/DOWN
NUMBER button
— (DASH) Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
BACK Tune to the last channel viewed.
Illuminates the remote control
LIGHT buttons of selected mode.
28
DVD
MODE
CABLE
TV
BACK
POWER Turns your TV or any other programmed equipment on or off, depending on the mode.
TV INPUT In AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources,
screen returns to the last TV channel.
INPUT External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGBPC (or RGB-DTV), HDMI1/DVI and HDMI2.
(AV 1-2, Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, and HDMI2 input sources are
linked automatically, only if these are connected.)
PICTURE Adjust the factory preset picture depend on
the viewing environment. G p . 6 9
SOUND Select the appropriate type of sound for type
of program. G p . 8 0
SAP
PICTURE
SOUND
BACK
SAP
Analog mode: Selects MTS sound (Mono,
Stereo, and a SAP)
DTV mode: Change the audio language.
CC Select a closed caption. G p . 9 4
(*In DTV/CADTV mode G p . 9 5)
CC
ADJUST
Installing Batteries
ADJUST Adjust the screen position, size and phase in
PC mode. G p .
WATCHING TV / CHANNEL CONTROL
Inside the Sliding Cover
Remote control effective range
INPUT
TV INPUT
INPUT
TV INPUT
POWER
POWER
■
■
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+with +,-with -).
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
Close cover.
DVD
MODE
CABLE
TV
AUDIO
VCR
DVD
MODE
CABLE
TV
STB
AUDIO
BRIGH
T-
MENU
BRIGHT
BRIGH
T-
MENU
VCR
STB
BRIGHT
■
Use a remote control up to 7 meters distance
and 30 degree (left/right) within the receiving
unit scope.
■
Dispose of used batteries in a recycle bin to
preserve environment.
29
WATCHING TV / CHANNEL CONTROL
TURNING ON TV
INPUT
TV INPUT
POWER
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■ In standby mode to turn TV on, press the
, INPUT, C H (D or E)
button on the TV or press the POWER, INPUT, TV INPUT, C H (D or
9 ) button on the remote control.
E), Number (0~9
Select the viewing source by using the TV INPUT, INPUT button on the
remote control.
■ This TV is programmed to remember which power state it was last set
to, even if the power cord is out.
TV
EXIT
VOL
DVD
MODE
VCR
NK
SIMPLI
RATIO
TIMER
MUTE
CH
FAV
BACK
WATCHING TV / CHANNEL CONTROL
PICTURE
SOUND
SAP
CC
When finished using the TV, press the POWER button on the remote
control. The TV reverts to standby mode.
! NOTE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
When the TV is turned on, the indicator will blink green before the picture is seen.
CHANNEL SELECTION
EXIT
VOL
Press the C H D
NK
SIMPLI
RATIO
TIMER
MUTE
CH
FAV
or NUMBER buttons to select a channel number.
VOLUME ADJUSTMENT
BACK
PICTURE
SOUND
SAP
CC
Adjust the volume to suit your personal preference.
EXIT
Press the V O L D or E button to adjust the volume.
VOL
30
NK
SIMPLI
RATIO
TIMER
MUTE
CH
FAV
If you want to switch the sound off, press the M U T E button.
You can cancel the Mute function by pressing the M U T E or V O L D or E
button.
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Press the M E N U button and then use D or E button to select the each menu.
Press the G button and then use D
E F G
button to display the available menus.
EZ Scan
EZ Picture
Manual Scan
Color Temperature
Channel Edit
XD
DTV Signal
Advanced
Input Source
Video Reset
Input Label
Set ID
LOCK
For USA
For Canada
AUDIO
Lock System
Lock System
Audio Language
Set Password
Set Password
EZ Sound
Block Channel
Block Channel
Balance
Movie Rating
TV Rating-English
TV Speaker
TV Rating-Children
TV Rating-French
TV Rating-General
Input Block
WATCHING TV / CHANNEL CONTROL
VIDEO
SETUP
Input Block
TIME
OPTION
Aspect Ratio
Auto Clock
Caption/Text
Manual Clock
Caption Option
Off Timer
Language
On Timer
ISM Method
Sleep Timer
Low Power
Auto Off
31
WATCHING TV / CHANNEL CONTROL
AUTO SCAN (EZ SCAN)
INPUT
TV INPUT
POWER
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run EZ Scan again after any Antenna/Cable connection
changes.
A password is required to gain access to EZ Scan menu if
the Lock System is turned on.
DVD
MODE
CABLE
TV
AUDIO
HT -
VCR
STB
MENU
BRIG
BRIG
HT +
ENTER
EXIT
NK
SIMPLI
RATIO
TIMER
WATCHING TV / CHANNEL CONTROL
EZ Scan
Press the M E N U button and then use D or E button
to select the S E T U P menu.
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Press the G button and then use D or E button to
select E Z S c a n.
Set ID
Press the E N T E R button to begin the channel search.
Allow E Z S c a n to complete the channel search cycle
for A N T E N N A and C A B L E.
EZ Scan
Manual Scan
Selection ( G or
leads you to the EZ
scan screen.
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
EZ Scan
Manual Scan
Channel Edit
Selection ( G or
leads you to the EZ
scan screen.
Processing EZ scan...
DTV Signal
Input Source
Input Label
Set ID
ANTENNA Ch.20
0 channel(s) found
Press
to stop the
current scan and start
DIGITAL ANTENNA channel
scan.
Next
MENU Previous
32
ADD/DELETE CHANNEL (MANUAL SCAN)
INPUT
TV INPUT
POWER
A password is required to gain access to Manual Scan
menu if the Lock System is turned on.
DVD
MODE
CABLE
TV
AUDIO
VCR
STB
MENU
HT -
BRIG
BRIG
HT +
ENTER
EXIT
NK
SIMPLI
RATIO
EZ Scan
Press the M E N U button and then use D or E button
to select the SETUP menu.
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Press the G button and then use D or E button to
select Manual Scan.
Set ID
Press the G button and then use D or E button to
select T V, D T V, C A T V, and C A D T V.
EZ Scan
Manual Scan
Channel Edit
Press the G button and then use D or E button to
select channel you want to add or delete.
Select channel type and
RF-channel number.
TV
DTV Signal
Input Source
WATCHING TV / CHANNEL CONTROL
TIMER
Input Label
Set ID
Press the ENTER button to add or delete the channel.
Press the E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Select channel type and
RF-channel number.
TV
TV 2-0
Input Label
Set ID
Press
to delete the channel.
33
WATCHING TV / CHANNEL CONTROL
CHANNEL EDITING
INPUT
TV INPUT
POWER
WATCHING TV / CHANNEL CONTROL
There are two different ways in order to add or delete
scanned channels. One is "Custom List" and the other is
"Favorite List" in the channel list. Both of them are available
after EZ Scan on the SETUP menu.
A Custom List can be created by toggling each channel on
or off with ENTER button. The channels in the Custom List
are displayed in black color, and the channels deleted from
the Custom List are displayed in gray color. Once a channel
is highlighted you can add or delete the channel by referring
to the small window at the top-left corner of the screen.
You can create your own Favorite List. Use the F A V button
on the remote control when a channel is highlighted and
then add or delete the channel to/from your Favorite List.
DVD
MODE
CABLE
TV
AUDIO
HT -
MENU
BRIG
VCR
STB
BRIG
HT +
ENTER
EXIT
TIMER
NK
SIMPLI
RATIO
EZ Scan
Manual Scan
Channel Edit
Press the M E N U button and then use D or E button
to select the SETUP menu.
DTV Signal
Input Source
Input Label
Set ID
Press the G button and then use D or E button to
select C h a n n e l E d i t.
Press the G button. You will now see a screen filled
with channel numbers and a preview picture.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Selection ( G or
) leads
you to the channel edit
screen.
Input Source
Use D E F G button to select a channel and then
use the ENTER button to add or delete it.
Press FAV button to add the channel to the Favorite List.
The heart-mark will appear in front of that channel
number.
Input Label
Set ID
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
34
DTV SIGNAL STRENGTH
INPUT
TV INPUT
POWER
This feature displays the DTV signal levels being received
and indicates whether you need to adjust your antenna or
digital cable input. The higher the signal strength, the less
likely you are to experience picture degradation.
DTV Signal: This function is only available when the input
signal is DTV or CADTV.
DVD
MODE
CABLE
TV
AUDIO
HT -
MENU
BRIG
VCR
STB
BRIG
HT +
ENTER
EXIT
NK
SIMPLI
RATIO
EZ Scan
Press the M E N U button and then use D or E button
to select the S E T U P menu.
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Press the G button and then use D or E button to
select D T V S i g n a l .
View the on-screen signal strength monitor to see
the quality of the signal being received.
Set ID
EZ Scan
Manual Scan
Channel Edit
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Bad
Normal
Good
DTV Signal
WATCHING TV / CHANNEL CONTROL
TIMER
Input Source
Input Label
Set ID
35
WATCHING TV / CHANNEL CONTROL
INPUT SOURCE SELECTION
INPUT
TV INPUT
POWER
Changes the picture source so you can watch your off-air
TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.
DVD
MODE
CABLE
TV
AUDIO
HT -
MENU
BRIG
VCR
STB
BRIG
HT +
ENTER
EXIT
WATCHING TV / CHANNEL CONTROL
Press the M E N U button and then use
to select the S E T U P menu.
or
TIMER
NK
SIMPLI
RATIO
EZ Scan
button
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Press the G button and then use
select I n p u t S o u r c e .
or
button to
Set ID
Press the G button and then use D or E button to
select the source: T V, A V 1, A V 2, C o m p o n e n t 1,
C o m p o n e n t 2, R G B - P C, H D M I 1 / D V I, or H D M I 2.
EZ Scan
TV
Manual Scan
AV1
Channel Edit
AV2
Component1
DTV Signal
Input Source
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Component2
Input Label
RGB-PC
Set ID
HDMI1/DVI
HDMI2
36
INPUT LABEL
INPUT
TV INPUT
POWER
Sets a label to each input source which is not in use when
you press the INPUT button.
DVD
MODE
CABLE
TV
AUDIO
HT -
VCR
STB
MENU
BRIG
BRIG
HT +
ENTER
EXIT
NK
SIMPLI
RATIO
EZ Scan
Press the M E N U button and then use D or E button
to select the S E T U P menu.
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Press the G button and then use D or E button to
select I n p u t L a b e l.
Set ID
Press the G button and then use D or E button to
select the source: A V 1, A V 2, C o m p o n e n t 1,
C o m p o n e n t 2, R G B - P C, H D M I 1 / D V I or H D M I 2.
Press the F or G button to select the label.
EZ Scan
AV1
Cable Box
Manual Scan
AV2
VCR
Channel Edit
Component1
DVD
DTV Signal
Component2
Set Top Box
Input Label
Set ID
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
RGB-PC
Input Source
PC
HDMI1/DVI
HDMI2
WATCHING TV / CHANNEL CONTROL
TIMER
Game
Satellite
37
WATCHING TV / CHANNEL CONTROL
MENU
HT -
BRIG
HT +
BRIG
This Enables you to control and play other AV devices connected to TV through HDMI cable without additional cables
and settings.
In order to control AV devices connected to TV without
Simplink, user had to switch the input mode of TV and use
additional remote control bundled to the AV devices.
Simplink provides an easy solution to control all connected
devices with one remote control.
ENTER
EXIT
VOL
TIMER
RATIO
MUTE
SIMPLI
NK
CH
FAV
WATCHING TV / CHANNEL CONTROL
Aspect Ratio
Press the M E N U button and then use
to select the O P T I O N menu.
or
button
Caption/Text
Caption Option
Language
ISM Method
Low Power
Press the G button and then use
select S i m p L i n k.
Press the G button and then use
select O n or O f f.
or
or
button to
button to
SimpLink
Aspect Ratio
Caption/Text
Caption Option
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Language
ISM Method
Low Power
SimpLink
Off
On
! NOTE
While Auto Tuning is proceeding, Simplink does not
work.
G Except Auto Tuning, Simplink stops the current activity
or clears Display OSD on the screen. After Simplink
workes, only Info. OSD resumes the display.
G While Menu, XSTUDIO is proceeding, Simplink does
not work.
38
Simplink Functions
R e c o r d i n g / D i s c p l a y b a c k : Control connected AV devices by pressing the D E F G, E N T E R
buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.
■ D i r e c t P l a y : After connecting AV devices to TV, you can directly control the devices and play
media without additional settings.
■ S e l e c t A V d e v i c e : Enables you to select one of AV devices connected to TV and play it.
■
P o w e r o f f a l l d e v i c e s : When you power off TV, all connected devices are turned off.
■ S w i t c h a u d i o - o u t : Offers an easy way to switch audio-out.
■
(A device, which is connected to TV through HDMI cable but does not support Simplink, does
not provide this function)
DVD
■ HDD
■ DVD
■ DVD
■
P l a y e r H / T : DVD player embeddedH/T device.
e m b e d d e d D V D R e c o r d e r ( R H ) : DVD recorder with HDD.
R e c o r d e r C o m b o ( R - C o m b i ) : DVD Recorder integrating VCR.
P l a y e r : Pre-recorded discs playback only.
SimpLink Menu
WATCHING TV / CHANNEL CONTROL
AV devices supporting SimpLink
Selected Device
When no device is connected
(displayed in gray)
When a device is connected
(displayed in bright color)
T V v i e w i n g: Switch to the previous TV channel regardless of the current mode.
D I S C p l a y b a c k: Select and play connected discs.
When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.
V C R p l a y b a c k: Play and control the connected VCR.
H D D R e c o r d i n g s p l a y b a c k: Play and control recordings stored in HDD.
A u d i o O u t t o H o m e t h e a t r e / A u d i o O u t t o T V: Select Home theatre or TV speaker for Audio Out.
39

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 20
PDF Version                     : 1.6
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1ccaaede-dcde-40cc-95e8-da9f7faf16fa
Modify Date                     : 2007:01:11 20:19:35+09:00
Create Date                     : 2007:01:11 20:19:06+09:00
Metadata Date                   : 2007:01:11 20:19:35+09:00
Document ID                     : uuid:4a308ad5-ff8b-4320-bad0-722c9cfceb75
Format                          : application/pdf
Title                           : MFL34797004-Edit1
Creator                         : 3.3: LaserWriter 8 8.7.1
Author                          : sun
Producer                        : Acrobat Distiller 4.0.5  for Macintosh

EXIF Metadata provided by EXIF.tools