LG Electronics USA 42LDA 42" LCD TV / MONITOR User Manual User s Manual H

Download:
Mirror Download [FCC.gov]
Document ID	532041
Application ID	xPxds9GAMHYeEFHFe/gTmg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	152.73kB (1909105 bits)
Date Submitted	2005-04-13 00:00:00
Date Available	2005-04-13 00:00:00
Creation Date	2005-04-13 11:57:18
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-04-13 11:58:51
Document Title	Microsoft Word - User_s Manual_H_.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	choi

Test Report No.: GETEC-E3-05-031
FCC Class B Certification
APPENDIX H
: USER’S MANUAL
EUT Type: 42” LCD TV/Monitor
FCC ID : BEJ42LDA
LCD TV
OWNER’S MANUAL
MODELS: 26LX1D 32LX1D
26LX2D 32LX2D
32LP1D 37LP1D 42LP1D
Internet Home Page : http://www.lge.com
http://www.lg.ca
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
TM
P/NO : 3828TUL309D (0503-REV00)
Printed in Korea
Warning
Warning
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
NOTE TO CABLE/TV INSTALLER:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric
Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
CAUTION:
Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation.
Unauthorized modification could void the user’s authority to operate this product.
U.S.A. only ----------------------------------------------COMPLIANCE:
The responsible party for this product’s compliance is:
LG Electronics U.S.A., Inc.
1000 Sylvan Avenue, Englewood Cliffs, NJ 07632
Phone: 1-201-816-2000
http://www.lgusa.com
---------------------------------------------------------------
Introduction
Controls (Model Name: 32/37/42LP1D)
- This is a simplified representation of front panel.
- Here shown may be somewhat different from your TV.
Logo Display Lamp
1394
IEEE
Channel Display
Power Standby Indicator
Illuminates red when the TV is in standby mode. When the TV
is switched on, blinks green and then illuminates green.
DTV, CADTV mode
HDMI mode
TV, CATV, DTV, CADTV mode
1394
IEEE
Video1-2 mode
Stereo mode
Component1-2 mode
PC mode
Remote Control Sensor
CH
VOL
IEEE1394
MENU TV/VIDEO/
TV
GUIDE
mode
AUDIO
ON/OFF
L/MONO
IN2
VIDEO
S-VIDEO
ON/OFF Button
Memory Card Slot
(For
mode)
TV GUIDE Button
TV/VIDEO /
CHANNEL (E,
D)
Buttons
MENU Button
VOLUME (F,G) Buttons
Button
S-VIDEO Input
Audio/Video Input 2
Introduction
Connection Options (Model Name: 32/37/42LP1D)
VIDEO
COMPONENT2
DIGITAL AUDIO OUTPUT
/ DVI INPUT
/ COMPONENT1 INPUT
AC IN
TM
G-LINK
Port
AUDIO
COMPONENT2
(VIDEO / AUDIO Input)
MONITOR OUT
HDMI / IEEE1394 Port
AUDIO/VIDEO INPUT1
CableCARD
TM
Slot
CableCARD
HDMI
AC IN
IEEE
1394
G-LINK
DIGITAL AUDIO
(OPTICAL)
AUDIO L (MONO) VIDEO
MONITOR
OUT
S-VIDEO
OUTPUT
VIDEO1
REMOTE
CONTROL
RS-232C INPUT
(CONTROL/SERVICE)
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
DVI
INPUT
COMPONENT1
INPUT
CABLE
COMPONENT1
AUDIO INPUT
ANTENNA
VIDEO INPUT
RS-232C INPUT (CONTROL/SERVICE) /
RGB INPUT (PC/DTV INPUT)
ANTENNA Input
CABLE Input
PC AUDIO INPUT
REMOTE CONTROL Port
COMPONENT1 (VIDEO / AUDIO INPUT)
* The HDMI port can receive video via High-Definition Multimedia Interface (HDMI) or the Digital Visual Interface
(DVI). Note: An adapter or special cable is required to plug DVI into an HDMI port (available at home theater or
computer stores).
Installation
External Equipment Connections
Antenna or Cable Connection
Analog and Digital TV signals provided on antenna
- Antenna or Cable Service without a Cable Box Connection.
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna Socket
ANTENNA
RF Coaxial Wire (75 ohm)
VHF Antenna
Turn clockwise to tighten.
UHF Antenna
Outdoor Antenna
Bronze Wire
Be careful not to bend the bronze wire when
connecting the antenna.
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Analog and Digital TV signals provided on cable
Cable TV Wall Jack
RF Coaxial Wire (75 ohm)
CABLE
Turn clockwise to tighten.
Analog and Digital TV signals provided on cable and antenna
Bronze Wire
Cable TV Wall Jack
RF Coaxial Wire (75 ohm)
CABLE
Turn clockwise to tighten.
Antenna
ANTENNA
RF Coaxial Wire (75 ohm)
Bronze Wire
• In a poor signal area to improve picture quality, purchase and install a signal amplifier.
ANTENNA
signal
amplifier
• If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter”
in the connections.
• If the antenna is not installed properly, contact your dealer for assistance.
21
Installation
NOTE: All cables shown are not included with the TV.
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides
of the screen may remain visible on the screen.
When connecting with an antenna
26 inch TV Back
CableCARD
32, 37, 42 inch TV Back
IEEE
1394
AUDIO L (MONO) VIDEO
ANT IN
ANT OUT
MONITOR
OUT
S-VIDEO OUT
IN
S-VIDEO OUT
(R) AUDIO (L) VIDEO
IN
CABLE
VCR
ANT OUT
OUTPUT
SWITCH
COMPONENT1
AUDIO INPUT
COMPONENT1
CABLE
VIDEO1
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
ANTENNA
AUDIO INPUT
S-VIDEO
VIDEO INPUT
HDMI
ANT IN
VIDEO INPUT
VCR
ANTENNA
Connect the RF antenna out socket of the VCR to the Antenna socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
When connecting with a RCA cable
26 inch TV Back
32, 37, 42 inch TV Back
AUDIO L (MONO) VIDEO
MONITOR
OUT
HDMI
IEEE
1394
VIDEO INPUT
COMPONENT1 INPUT
DVI INPUT
AUDIO INPUT
COMPONENT1
VIDEO1
COMPONENT1
VIDEO INPUT
OUTPUT
DIGITAL AUDIO
(OPTICAL)
AUDIO L (MONO) VIDEO S-VIDEO
VIDEO1
AUDIO INPUT
S-VIDEO
ANT IN
ANT IN
ANT OUT
S-VIDEO OUT
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
IN
VCR
ANT OUT
VCR
S-VIDEO OUT
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
IN
Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select Video1 input source using the TV/VIDEO button on the remote control.
- If connected to IN2 (or VIDEO2), select Video2 input source.
• If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack
of the set.
NOTE: All cables shown are not included with the TV
DVD Setup
When connecting with a S-Video cable
26 inch TV Back
32, 37, 42 inch TV Back
AUDIO L (MONO) VIDEO
MONITOR
OUT
S-VIDEO
HDMI
IEEE
1394
VIDEO1
COMPONENT1 INPUT
AUDIO INPUT
DVI INPUT
VIDEO INPUT
VIDEO1
COMPONENT1
VIDEO INPUT
AUDIO INPUT
AUDIO L (MONO) VIDEO S-VIDEO
OUTPUT
COMPONENT1
DIGITAL AUDIO
(OPTICAL)
DVD
DVD
(R) AUDIO (L)
S-VIDEO
(R) AUDIO (L)
Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.
Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
Turn on the DVD player, insert a DVD.
Select Video1 input source with using the TV/VIDEO button on the remote control.
- If connected to IN2 (or VIDEO2), select Video 2 input source.
Refer to the DVD player's manual for operating instructions.
S-VIDEO
When connecting with a HDMI cable
32, 37, 42 inch TV Back
26 inch TV Back
CableCARD
HDMI
CableCARD
HDMI
IEEE
1394
IEEE
1394
COMPONENT1
HDMI-DVD OUPUT
DVD
Connect the HDMI output of the DVD to the HDMI
jack on the set.
Select HDMI input source with using the
TV/VIDEO button on the remote control.
Refer to the DVD player's manual for operating
instructions.
HDMI-DVD OUPUT
ANTENNA
AUDIO INPUT
CABLE
VIDEO INPUT
DVD
• TV can receive the video and audio signal simultaneously with using a HDMI cable.
• If the DVD supports Auto HDMI function, the DVD
output resolution will be automatically set to
1280x720p.
• If the DVD does not support Auto HDMI, you need
to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of
the DVD to 1280x720p.
When connecting with a component cable
26 inch TV Back
32, 37, 42 inch TV Back
DIGITAL AUDIO
(OPTICAL)
AUDIO L (MONO) VIDEO
MONITOR
OUT
S-VIDEO
OUTPUT
HDMI
VIDEO1
IEEE
1394
VIDEO INPUT
COMPONENT1 INPUT
DVI INPUT
AUDIO INPUT
COMPONENT1
2-2
2-1
AUDIO INPUT
COMPONENT1
INPUT
OUTPUT
VIDEO1
COMPONENT1
DIGITAL AUDIO
(OPTICAL)
VIDEO INPUT
RGB INPUT
(PC/DTV INPUT)
DVI
INPUT
AUDIO L (MONO) VIDEO S-VIDEO
RS-232C INPUT
(CONTROL/SERVICE)
2-1
2-2
(R) AUDIO (L)
DVD
Select
2-1 or 2-2
(R) AUDIO (L)
DVD
, depending on your DVD connector.
Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT1 VIDEO INPUT jacks on the set.
2-1
Connect the audio outputs of the DVD to the COMPONENT1 AUDIO INPUT jacks on the set.
2-2
Connect the optical audio output of the DVD to the DIGITAL AUDIO COMPONENT1 INPUT jack on the set.
Turn on the DVD player, insert a DVD.
Select Component 1 input source with using the TV/VIDEO button on the remote control.
- If connected to COMPONENT2 input, select Component 2 input source.
Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
PR
Component ports on the TV
PB
Video output ports
on DVD player
Pr
Pb
B-Y R-Y
Cb Cr
PB PR
• Digital Audio will not work for Component 2 input source.
• Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time.
25
Installation
HDSTB Setup
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if
you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure
as shown below.
When connecting with a D-sub 15 pin cable
32, 37, 42 inch TV Back
26 inch TV Back
AC IN
RS-232C INPUT
(CONTROL/SERVICE)
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
G-LINK
DVI
INPUT
REMOTE
CONTROL
RS-232C INPUT
(CONTROL/SERVICE)
COMPONENT1
INPUT
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
(R) AUDIO (L)
(R) AUDIO (L)
RGB-DTV OUPUT
DIGITAL AUDIO
(OPTICAL)
DVI INPUT
COMPONENT1 INPUT
VIDEO1
REMOTE
CONTROL
OUTPUT
OUTPUT
AUDIO L (MONO) VIDEO S-VIDEO
G-LINK
DIGITAL AUDIO
(OPTICAL)
AC IN
RGB-DTV OUPUT
Digital Set-top Box
Digital Set-top Box
Connect the RGB output of the digital set-top box to the RGB INPUT (PC/DTV INPUT) jack on the set.
Connect the audio outputs of the set-top box to the PC AUDIO INPUT jack on the set.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select RGB-DTV input source with using the TV/VIDEO button on the remote control.
Installation
When connecting with a HDMI cable
32, 37, 42 inch TV Back
HDMI
26 inch TV Back
CableCARD
CableCARD
HDMI
IEEE
1394
COMPONENT1
Digital Set-top Box
ANTENNA
AUDIO INPUT
CABLE
VIDEO INPUT
IEEE
1394
Digital Set-top Box
HDMI-DTV OUPUT
HDMI-DTV OUPUT
Connect the HDMI output of the digital set-top box to the HDMI jack on the set.
Select HDMI/DVI input source with using the TV/VIDEO button on the remote control.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
• TV can receive the video and audio signal simultaneously with using a HDMI cable.
• If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will be automatically set to 1280x720p.
• If the digital set-top box does not support Auto HDMI, you need to set the output resolution appropriately. To get
the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.
Installation
When connecting with a HDMI to DVI cable
32, 37, 42 inch TV Back
26 inch TV Back
HDMI
HDMI
IEEE
1394
COMPONENT1
INPUT
ANTENNA
AUDIO INPUT
VIDEO INPUT
2-1
2-2
DIGITAL AUDIO
OPTICAL
(R) AUDIO (L)
Digital Set-top Box
Select
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
2-1
or
2-2
DVI-DTV OUTPUT
COMPONENT1 INPUT
2-1
(R) AUDIO (L)
RGB INPUT
(PC/DTV INPUT)
REMOTE
CONTROL
COMPONENT1
COMPONENT1
PC AUDIO
INPUT
DVI
INPUT
DVI INPUT
2-2
DIGITAL AUDIO
OPTICAL
AUDIO INPUT
RS-232C INPUT
(CONTROL/SERVICE)
RS-232C INPUT
(CONTROL/SERVICE)
REMOTE
CONTROL
CABLE
VIDEO1
VIDEO1
OUTPUT
G-LINK
MONITOR
OUT
S-VIDEO
OUTPUT
DIGITAL AUDIO
(OPTICAL)
VIDEO INPUT
DIGITAL AUDIO
(OPTICAL)
G-LINK
IEEE
1394
AUDIO L (MONO) VIDEO
AUDIO L (MONO) VIDEO S-VIDEO
DVI-DTV OUTPUT
Digital Set-top Box
, depending on your digital set-top box connector.
Connect the DVI output of the digital set-top box to the HDMI jack on the set.
2-1
Connect the audio output of the digital set-top box to the PC AUDIO INPUT jack on the set.
2-2
Connect the optical audio output of the digital set-top box to the DIGITAL AUDIO DVI INPUT jack on the set.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select HDMI/DVI input source with using the TV/VIDEO button on the remote control.
• If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is necessary.
• If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will be automatically set to 1280x720p.
• If the digital set-top box does not support Auto DVI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.
Installation
External AV Source Setup
COMPONENT 2
VIDEO
Camcorder
TV Side
Video Game Set
AUDIO
Connect the AUDIO/VIDEO jacks between TV
and external equipment. Match the jack colors
(Video = yellow, Audio Left = white, and Audio
Right = red).
Select Video2 input source with using the
TV/VIDEO button on the remote control.
- If connected to VIDEO1 input, select Video1
input source.
Operate the corresponding external equipment.
Refer to external equipment operating guide. For
connection instructions to operate the TV Guide
On Screen system, see page 42~43.
AUDIO
(MONO) L
VIDEO 2
VIDEO
S-VIDEO
VIDEO
Digital Audio Output
- Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output Optical port.
32, 37, 42 inch TV Back
26 inch TV Back
DIGITAL AUDIO
(OPTICAL)
OUTPUT
REMOTE
CONTROL
PC AUDIO
INPUT
DIGITAL AUDIO
(OPTICAL)
RS-232C INPUT
(CONTROL/SERVICE)
RGB INPUT
(PC/DTV INPUT)
DVI
INPUT
REMOTE
CONTROL
RS-232C INPUT
(CONTROL/SERVICE)
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
DVI INPUT
1/2
COMPONENT1 INPUT
VIDEO1
G-LINK
OUTPUT
G-LINK
AUDIO L (MONO) VIDEO S-VIDEO
AC IN
1/2
AC IN
COMPONENT1
INPUT
Connect one end of an optical cable to the TV Digital Audio Optical Output port.
Connect the other end of the optical cable to the digital audio optical input on the audio equipment.
See the external audio equipment instruction manual for operation. When connecting with external audio
equipments, such as amplifers or speakers, please turn the TV speakers off.(Refer to p.80)
CAUTION
Do not look into the optical output port. Looking at the laser beam may damage your vision.
Installation
Monitor Out Setup (32LX1D/2D, 32/37/42LP1D only)
- The TV has a special signal output capability which allows you to hook up a second TV or monitor.
AUDIO L (MONO) VIDEO
MONITOR
OUT
S-VIDEO
Connect the second TV or monitor to the TV’s
MONITOR OUTPUT jacks.
See the Operating Manual of the second TV or
monitor for further details regarding that device’s
input settings.
VIDEO1
COMPONENT1
VIDEO INPUT
AUDIO INPUT
1/2
• Component1/2 input sources can be used for
Monitor out.
• When connecting with external audio equipments,
such as amplifers or speakers, please turn the TV
speakers off.(Refer to p.80)
Second TV
S-VIDEO IN
(R) AUDIO (L) VIDEO
CableCARDTM Setup
32, 37, 42 inch TV Back
HDMI
26 inch TV Back
CableCARD
CableCARD
HDMI
IEEE
1394
IEEE
1394
COMPONENT1
AUDIO INPUT
ANTENNA
VIDEO INPUT
CABLE
- To view the premium stations
Insert the CableCARDTM received from Cable Service provider to CableCARD slot of TV as shown. If
the pairing information about this TV and the CableCARD is automatically displayed on the screen,
contact with Cable service provider by phone.
Caution:
When removing the CableCARDTM, do not
drop it as this may cause damage to the
card.
• Different card types can be used with this unit
(Motorola, Scientific Atlanta, SCM, etc.).
Installation
PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
The TV sends configuration information (EDID) to the PC using the Video Electronics Standard Association
(VESA) Display Data Channel (DDC) protocol.
When connecting with a D-sub 15 pin cable
32, 37, 42 inch TV Back
26 inch TV Back
DIGITAL AUDIO
(OPTICAL)
OUTPUT
REMOTE
CONTROL
PC AUDIO
INPUT
DIGITAL AUDIO
(OPTICAL)
RS-232C INPUT
(CONTROL/SERVICE)
RGB INPUT
(PC/DTV INPUT)
DVI
INPUT
REMOTE
CONTROL
RS-232C INPUT
(CONTROL/SERVICE)
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
DVI INPUT
COMPONENT1 INPUT
G-LINK
OUTPUT
G-LINK
COMPONENT1
INPUT
PC
AUDIO
AUDIO
RGB-PC OUPUT
PC
RGB-PC OUPUT
Connect the RGB output of the PC to the RGB INPUT (PC/DTV INPUT) jack on the set.
Connect the PC audio output to the PC AUDIO INPUT jack on the set.
Turn on the PC and the set.
Select RGB-PC input source with using the TV/VIDEO button on the remote control.
VIDEO1
AC IN
AUDIO L (MONO) VIDEO S-VIDEO
AC IN
Installation
When connecting with a HDMI to DVI cable
32, 37, 42 inch TV Back
26 inch TV Back
HDMI
DVI (VIDEO)
HDMI
IEEE
1394
IEEE
1394
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
DVI INPUT
COMPONENT1
INPUT
AUDIO INPUT
ANTENNA
COMPONENT1 INPUT
VIDEO INPUT
2-1
2-2
DIGITAL AUDIO
OPTICAL
AUDIO
Select
2-1
or
2-2
RS-232C INPUT
(CONTROL/SERVICE)
RGB INPUT
(PC/DTV INPUT)
REMOTE
CONTROL
COMPONENT1
AUDIO INPUT
PC AUDIO
INPUT
DVI
INPUT
COMPONENT1
RS-232C INPUT
(CONTROL/SERVICE)
CABLE
VIDEO1
VIDEO1
REMOTE
CONTROL
OUTPUT
G-LINK
MONITOR
OUT
OUTPUT
VIDEO INPUT
AUDIO L (MONO) VIDEO
S-VIDEO
AUDIO L (MONO) VIDEO S-VIDEO
DIGITAL AUDIO
(OPTICAL)
G-LINK
DIGITAL AUDIO
(OPTICAL)
DVI-PC OUTPUT
PC
2-1
2-2
(R) AUDIO (L)
DIGITAL AUDIO
OPTICAL
DVI OUTPUT
PC
, depending on your PC connector.
Connect the DVI output of the PC to the HDMI jack on the set.
2-1
Connect the PC audio output to the PC AUDIO INPUT jack on the set.
2-2
Connect the PC optical audio output to the DIGITAL AUDIO DVI INPUT jack on the set.
Turn on the PC and the set.
Select HDMI/DVI input source with using the TV/VIDEO button on the remote control.
• If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
• If the PC supports Auto DVI function, the output resolution of the PC will be automatically set to 1280x720p.
• If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture
quality, adjust the output resolution of PC graphics card's output resolution to 1024x768, 60Hz.
Installation
1. To get the best picture quality, adjust the PC
graphics card to 1024x768, 60Hz.
2. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only
one of either PC INPUT or DVI INPUT to display
the PC on the TV.
If the graphic card on the PC does output analog
and digital RGB simultaneously, set the TV to
either RGB or DVI; (the other mode is set to Plug
and Play automatically by the TV.)
3. If using a sound card, adjust the PC sound as
required.
4. Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
5. When Source Devices connected with HDMI1/DVI
Input, output PC Resolution (VGA, SVGA, XGA),
Position and Size may not fit to Screen.Press the
ADJUST button to adjust the screen Position of TV
SET and contact an PC graphics card service center.
6. When Source Devices connected with HDMI1/DVI
Input, output TV SET Resolution (480p, 720p,
1080i) and TV SET Display fit EIA/CEA-861-B
Specification to Screen. If not, refer to the Manual
of HDMI1/DVI Source Devices or contact your service center.
Supported Display Resolution
(RGB-PC, HDMI/DVI Mode)
Resolution
640x350
720x400
640x480
800x600
1024x768
7. In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL"
OSD display in HDMI1/DVI Input. In case that
Video Resolution is not supported TV SET output
in HDMI1/DVI Source Devices, "INVALID FORMAT" OSDdisplay. Refer to the Manual of
HDMI1/DVI Source Devices or contact your service center.
8. Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC, HDMI/DVI mode. If
noise is present, change the PC or HDMI/DVI
mode to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be
changed, change the PC graphic card or consult
the manufacturer of the PC graphic card.
9. Avoid keeping a fixed image on the TV's screen for
a long period of time. The fixed image may become
permanently imprinted on the screen.
10.The synchronization input form for Horizontal and
Vertical frequencies is separate.
Supported Display Resolution
(RGB-DTV, HDMI/DVI Mode)
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.468
70.09
1280x720p
37.861
45
60
85.08
1920x1080i
67.5
60
31.469
70.08
720x480p
31.5
60
37.927
85.03
31.469
59.94
37.861
72.80
37.500
75.00
35.156
56.25
37.879
60.31
48.077
72.18
46.875
75.00
48.363
60.00
56.476
70.06
60.023
75.02
Reference
External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and
control the Monitor’s functions externally.
- Connect the serial port of the control device to the RS-232C jack on the TV back panel.
- RS-232C connection cables are not supplied with the TV.
RS-232C Setup
AC IN
G-LINK
DIGITAL AUDIO
(OPTICAL)
OUTPUT
REMOTE
CONTROL
RS-232C INPUT
(CONTROL/SERVICE)
PC AUDIO
INPUT
RGB INPUT
(PC/DTV INPUT)
DVI
INPUT
COMPONENT1
INPUT
PC
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
RS-232C Configurations
3-Wire Configurations
(Not standard)
7-Wire Configurations
(Serial female-female NULL modem cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Reference
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe
the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.
Product Specifications
MODEL
26LX1D
Width (inches / mm)
31 / 787.7
Height (inches / mm)
32LX1D
32LX2D
31 / 787.7
36.3 / 922
36.3 / 922
20 / 510
19.2 / 487
23.6 / 599.7
24.1 / 613.4
Depth (inches / mm)
7.6 / 193.4
10 / 253
8.6 / 218.5
11.3 / 287.5
Weight (pounds / kg)
41.2 / 18.7
40 / 18.1
54 / 24.5
56.2 / 25.2
Power requirement
26LX2D
AC 100-240V~ 50/60Hz 1.5A
AC 100-240V~ 50/60Hz 2.0A
Television System
NTSC-M, ATSC
Program Coverage
VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69
External Antenna Impedance
75 Ω
MODEL
32LP1D
37LP1D
42LP1D
Width (inches / mm)
40 / 1016
45.6 / 1158
50.8 / 1290
Height (inches / mm)
24.7 / 627.5
28.3 / 719
31.7 / 804
Depth (inches / mm)
8.03 / 204
8.4 / 213.1
9.7 / 247.5
Weight (pounds / kg)
70.5 / 32
91.5 / 41.5
101.4 / 46
Power requirement
AC 100-240V~ 50/60Hz 2.0A
AC 100-240V~ 50/60Hz 2.4A
AC 100-240V~ 50/60Hz 3.5A
Television System
NTSC-M, ATSC
Program Coverage
VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69
External Antenna Impedance
75 Ω
• The specifications shown above may be changed without prior notice for quality improvement.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 20
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:5aaf6cf9-90fb-4aba-bf6a-7dbf8a57056f
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:04:13 11:57:18+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2005:04:13 11:58:51+09:00
Metadata Date                   : 2005:04:13 11:58:51+09:00
Document ID                     : uuid:1e2d99c7-5920-4a80-9d1a-31eb75ffc77f
Format                          : application/pdf
Title                           : Microsoft Word - User_s Manual_H_.doc
Creator                         : choi
Author                          : choi

EXIF Metadata provided by EXIF.tools