LG Electronics USA 55LV555HUA LCD TV/Monitor User Manual SAC34134301 Edit1

LG Electronics USA LCD TV/Monitor SAC34134301 Edit1

User manual 1 of 5

Download: LG Electronics USA 55LV555HUA LCD TV/Monitor User Manual SAC34134301 Edit1
Mirror Download [FCC.gov]LG Electronics USA 55LV555HUA LCD TV/Monitor User Manual SAC34134301 Edit1
Document ID1535211
Application IDQ+WEbCd7Yn0e4KWdqt8VTA==
Document DescriptionUser manual 1 of 5
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize249.91kB (3123900 bits)
Date Submitted2011-09-01 00:00:00
Date Available2011-09-01 00:00:00
Creation Date2011-09-01 01:56:49
Producing SoftwareAcrobat Distiller 9.3.3 (Windows)
Document Lastmod2011-09-01 01:56:49
Document TitleSAC34134301-Edit1
Document CreatorPScript5.dll Version 5.2.2
Document Author: mch

OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
32LG710H
37LG710H
42LG710H
32LD650H
37LD650H
42LD650H
47LD650H
55LD650H
32LD655H
37LD655H
42LD655H
P/NO : SAC34134301 (1107-REV05)
32LD660H
37LD660H
42LD660H
32LD665H
37LD665H
42LD665H
32LV555H
37LV555H
42LV555H
47LV555H
55LV555H
www.lg.com
WARNING / CAUTION
WARNING / CAUTION
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating
and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause (harmful)
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation (of the device).
Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong, The
wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from
tip-over.
Unplug this apparatus during lighting storms or
when unused for long periods of time.
10
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
11
Never touch this apparatus or antenna during a
thunder or lighting storm.
12
When mounting a TV on the wall, make sure not to
install the TV by the hanging power and signal cables
on the back of the TV.
13
Do not allow an impact shock or any objects to fall
into the product, and do not drop onto the screen
with something.
14
15
16
CAUTION concerning the Power Cord :
It is recommend that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the same
AC power outlet as this could result in fire or electric shock.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized servicer. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord plugged
in. Do not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug the
TV.
WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain, moisture
or other liquids. Do not touch the TV with wet
hands. Do not install this product near flammable
objects such as gasoline or candles or expose the
TV to direct air conditioning.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
17
Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).
18
GROUNDING
Ensure that you connect the earth ground wire to
prevent possible electric shock. (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grouned AC outlet) If grounding
methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
19
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The plug
must remain readily operable.
20
Dot Defect
The Plasma or LCD panel is a high technology
product with resolution of two million to six million
pixels. In a very few cases, you could see fine dots
on the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.
21
Generated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated
by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Electrical circuit humming/panel buzzing: A low
level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending
on the product.
This generated sound does not affect the performance and reliability of the product.
22
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
come in contact with such power lines or circuits as
death or serious injury can occur.
Be sure the antenna system is grounded so as to provide some protection against voltage surges and
built-up static charges.
Section 810 of the National Electrical Code (NEC) in
the U.S.A. provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Ground Clamp
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Electric Service
Equipment
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
NEC: National Electrical Code
23
Cleaning
When cleaning, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not
spray water or other liquids directly on the TV as
electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene.
24
Moving
Make sure the product is turned off, unplugged
and all cables have been removed. It may take 2 or
more people to carry larger TVs. Do not press
against or put stress on the front panel of the TV.
25
Ventilation
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in
excessively dusty places.
26
Take care not to touch the ventilation openings.
When watching the TV for a long period, the ventilation openings may become hot.
27
If you smell smoke or other odors coming from the
TV, unplug the power cord contact and authorized
service center.
28
Do not press strongly upon the panel with a hand or
sharp object such as nail, pencil or pen, or make a
scratch on it.
29
Keep the product away from direct sunlight.
30
For LCD TV
If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
ON DISPOSAL
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out in
accordance to the regulations of your local authority.
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Stand Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Attaching the TV to a desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Securing the TV to the wall to prevent falling
When the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 32
MPI Card Slot / PPV Card Installation . . . . . . . . . . . . . . 33
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Audio Out Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
WATCHING TV / CHANNEL CONTROL
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Turning On The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Channel Setup
- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
- Add / Delete Channel (Manual Tuning) . . . . . . 53
- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Channel Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Example Electronic Program Guide . . . . . . . . . . . . . . . . . . . 56
USB
Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Extra Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
PICTURE CONTROL
PIP (Picture-In-Picture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 68
Preset Picture Settings (Picture Mode) . . . . . . . . . . . . . 71
Manual Picture Adjustment - User Mode . . . . . . . . . . 72
Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . 73
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Demo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
SOUND & LANGUAGE CONTROL
Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 77
Preset Sound Settings (Sound Mode) . . . . . . . . . . . . . . . 78
Sound Setting Adjustment - User Mode . . . . . . . . . . . 79
- SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
- Infinite Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Clear Voice ll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Stereo/SAP Broadcast Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
On-Screen Menus Language Selection . . . . . . . . . . . . . . 87
Caption Mode
- Analog Broadcasting System Captions . . . . . . . 88
- Digital Broadcasting System Captions . . . . . . . . 89
- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TIME SETTING
Clock Setting
- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Auto Shut-Off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Programming the Remote Control . . . . . . . . . . . . . . . . . . . 112
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Open Source License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
FEATURES OF THIS TV
■
This feature is not available for all models.
High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.
Unlike other sensors which can only sense brightness
of ambient light, LG’s “Intelligent Sensor” uses 4,096
sensing steps to evaluate its surroundings. Using a
sophisticated algorithm, the LG processes picture
quality elements including brightness, contrast, color,
sharpness and white balance. The result is a picture
optimized for it’s surroundings, more pleasing to
watch and which can also save up to 50% in power
consumption.
View videos and photos and listen to music on your
TV through USB 2.0 (‘videos’ dependent on model).
LG TV include a unique invisible speaker system,
tuned by renowned audio expert, Mr. Mark Levinson.
Speakers are embedded in strategic spots behind the
front cabinet and use minute vibrations to turn the
entire front bezel into the speaker system. The result
is a clean, polished look, and enhanced audio by
increasing the “sweet spot”, giving a wider and richer
sound field.
Manufactured under license from Dolby Laboratories.
“Dolby “and the double-D symbol are trademarks of
Dolby Laboratories.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.
Automatically enhances and amplifies the sound of
human voice frequency range to help keep dialogue
audible when background noise swells.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."
Matches the original frame rate of the film for a more
film-like experience
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN
/ BURN-IN” ON YOUR TV SCREEN
■
■
■
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV
for an extended period, it can become permanently imprinted on the screen. This phenomenon is known
as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period
(2 or more hours for LCD, 1 or more hours for Plasma).
Image burn can also occur on the letterboxed
areas of your TV if you use the 4:3 aspect
ratio setting for an extended period.
PREPARATION
ACCESSORIES
(For 32/37/42LG710H,
32/37/42/47/55LD650H,
32/37/42LD655H)
(For 32/37/42/47/55LV555H)
TV
PO
ER
ID
GU
ST
VD
R i
VC
FO
IN
RTA
PO
TU
RE
TE
EN
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
The accessories included may differ from the images below.
RN
ME
IN
PU
VO
UM
A/N
PH
AL
CC
MUT
VE
MO
RE
.:/,
AB
GH
DE
JK
RS
PQ
MN
TU
YZ
WX
&@
PIP
HBK
FLAS
CH
TIO
RA
PIP
ER
CH
TIM
PIP
PIP
SA
AP
SW
1.5V 1.5V
PIP
UT
INP
Owner’s Manual
CD Manual
Quick Reference Guide
Remote control,
batteries (AAA)
Optional Extras
Polishing Cloth
(Not included with all
models.)
* Wipe spots on the exterior only with
the polishing cloth.
* Do not wipe roughly when removing
stains. Excessive pressure may cause
scratches or discoloration.
D-sub 15-pin
signal cable
When using the VGA (D-sub 15pin signal cable) PC connection,
the user must use shielded signal
interface cables with ferrite
cores to maintain standards
compliance.
F or 32/37/42LG710H
x4
x4
Screws for
stand assembly
(Refer to P.19)
x2
Torx plus
Star-head screw
(Refer to P.19)
Protection cover
(Refer to P.19)
Power cord
Screw for
stand fixing
(Refer to P.27)
Protective bracket and
screw for power cord
(Refer to P.23)
(For 32LG710H)
Cable holder
(Refer to P.23)
Plug-in type holder
(Refer to P.23)
PREPARATION
F or 32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H
PREPARATION
x8
x2
(M4 x 20)
Screws for
stand assembly
(Refer to P.20)
Power cord
Torx plus
Star-head screw
(Refer to P.20)
Protection Cover
(Refer to P.20)
Protective bracket and
screw for power cord
(Refer to P.24)
(For 32/37/42LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H)
x4
Plug-in type holder
(Refer to P.24)
Cable holder
(Refer to P.24)
Rubbers for
stand fixing
(Refer to P.27)
x2
x2
Screws for
stand fixing
(Refer to P.27)
10
x2
x2
Screw for
stand fixing
(Refer to P.27)
Nuts for
Washers for
stand fixing
stand fixing
(Refer to P.27) (Refer to P.27)
F or 32/37/42/47/55LV555H
PREPARATION
(For 47/55LV555H)
x8
(M4 x 12)
Composite gender cable
Screws for stand assembly
(Refer to P.22)
(For 32/37/42LV555H)
x4
(M4 x 14)
x4
x2
(M4 x 20)
Screws for stand assembly
(Refer to P.21)
x2
Screw for stand fixing
(Refer to P.27)
x2
Screws for
stand fixing
(Refer to P.27)
x4
x2
Washers for
stand fixing
(Refer to P.27)
Nuts for
stand fixing
(Refer to P.27)
Rubbers for
stand fixing
(Refer to P.27)
11
PREPARATION
FRONT PANEL INFORMATION
■
Image shown may differ from your TV.
PREPARATION
32/37/42LG710H
CH
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
VOL
CHANNEL(
Buttons
VOLUME (+, -)
Buttons
ENTER
ENTER Button
MENU
MENU Button
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is
switched on.
Remote Control Sensor
POWER Button
12
INPUT
INPUT Button
CH
VOL
CHANNEL(
Buttons
PREPARATION
32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H
VOLUME (+, -)
Buttons
ENTER
SPEAKER
ENTER Button
MENU
MENU Button
INPUT
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is
switched on.
Remote Control Sensor
INPUT Button
POWER Button
Intelligent Sensor
Adjusts picture according to the surrounding conditions.
13
PREPARATION
PREPARATION
32/37/42/47/55LV555H
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is
switched on.
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding
conditions.
SPEAKER
CH
CHANNEL
( , )
Buttons
14
VOL
VOLUME
(+, -)
Buttons
ENTER
ENTER
Button
HOME
INPUT
MENU INPUT POWER
Button Button Button
BACK PANEL INFORMATION
■
Image shown may differ from your TV.
14
USB IN
M.P.I.
15
LAN
(SERVICE ONLY)
HDMI/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
RGB IN
RESET
1(DVI)
REMOTE
CONTROL OUT
RS-232C IN
(SERVICE ONLY)
10
AV IN 2
AV IN 1
RJP
INTERFACE
AUDIO
VIDEO
COMPONENT IN
13
SPEAKER OUT
UPDATE
AUDIO
(RGB/DVI)
RGB(PC)
GAME
CONTROL
TV-LINK
CFG
VIDEO L/MONO AUDIO R
ANTENNA IN
16
PREPARATION
32/37/42LG710H
11
/ MONO VIDEO
AUDIO
11
12
AC IN
ANTENNA IN
14
15
17
17
RESET
GAME
CONTROL/MPI
LAN 1
LAN2
11
UPDATE
HDMI/DVI IN
OPTICAL
DIGITAL
VIDEO
/ MONO AUDIO
AV IN 1
TV-LINK CFG
SPEAKER
OUT
AUDIO OUT
RJP
INTERFACE
RGB IN (PC)
AUDIO IN
(RGB/DVI)
AV IN 2
COMPONENT
IN
16
VIDEO L/MONO AUDIO R
USB IN
32/37/42LD660H, 32/37/42LD665H
11
SERVICE
ONLY
RS-232C IN
(SERVICE ONLY)
15
13
12
18
PREPARATION
M.P.I.
14
AC IN
15
11
SPEAKER
OUT
GAME
CONTROL
LAN
AV IN 1
UPDATE
RESET
HDMI/DVI IN
TV-LINK CFG
OPTICAL
DIGITAL
VIDEO
/ MONO AUDIO
AUDIO OUT
RJP
INTERFACE
13
11
REMOTE
CONTROL
OUT
RS-232C IN
(SERVICE ONLY)
AUDIO IN
(RGB/DVI)
RGB IN (PC)
AV IN 2
COMPONENT
IN
16
VIDEO L/MONO AUDIO R
PREPARATION
ANTENNA IN
USB IN
32/37/42LD650H, 32/37/42LD655H
10
12
AC IN
ANTENNA IN
LAN
RESET
UPDATE
HDMI/DVI IN
GAME CONTROL
/ M.P.I.
OPTICAL
DIGITAL
VIDEO
/ MONO AUDIO
AV IN 1
TV-LINK CFG
SPEAKER
OUT
AUDIO OUT
RJP
INTERFACE
13
RGB IN (PC)
AUDIO IN
(RGB/DVI)
12
AV IN 2
REMOTE
CONTROL
OUT
RS-232C IN
(SERVICE ONLY)
COMPONENT
IN
16
11
14
16
VIDEO L/MONO AUDIO R
15
USB IN
47/55LD650H
10
11
32/37/42/47/55LV555H
LAN 1
SPEAKER
OUT (8 )
18
SERVICE
ONLY
GAME CONTROL
/ MPI
HDMI/DVI IN
LAN 2
OPTICAL
DIGITAL
VIDEO
/ MONO AUDIO
AV IN 1
TV-LINK CFG
ANTENNA IN
11
AUDIO OUT
INTERFACE
13
AUDIO IN
(RGB/DVI)
RGB IN (PC)
COMPONENT
IN
RJP
11
14
UPDATE
USB IN
USB IN
RESET
HDMI/DVI
IN 2
5 4
AV IN 2
VIDEO / AUDIO
17
16
PREPARATION
15
12
RS-232C IN
(SERVICE ONLY)
17
PREPARATION
PREPARATION
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).
AUDIO IN (RGB/DVI)
1/8” headphone jack for analog PC audio input.
LAN (SERVICE ONLY)
For connecting to a control network.
RESET
Performs a hardware reset.
UPDATE
Enables/disables software downloads and debug mode.
18
HDMI/DVI IN
Digital Connection. Supports HD video and Digital
audio.
Accepts DVI video using an adapter or HDMI to DVI
cable (not included)
TV - LINK CFG
Computer input for programming Free To Guest services.
GAME CONTROL
Input port for third party game Controllers.
M.P. I.
Allows VOD/PPV devices or set-top boxes to control
the TV.
RS-232C IN (SERVICE ONLY)
Used for software updates.
OPTICAL DIGITAL AUDIO OUT
Optical digital audio output for use with amps and
home theater systems.
Note: In standby mode, this port doesn’t work.
SPEAKER OUT 8Ω
For use with external speakers.
10
REMOTE CONTROL OUT
IR output for controlling an auxiliary device.
11
AV (Audio/Video) IN 1/2
Analog composite connection. Supports standard
definition video only (480i).
12
COMPONENT IN
Analog Connection. Supports HD.
Uses a red, green, and blue cable for video & a red
and white cable for audio.
13
RJP INTERFACE (REMOTE JACK PACK PORT)
Connect this to an LG remote jack pack system.
14
ANTENNA IN
Connect an antenna to receive over-the-air (OTA)
signals.
15
Power Cord Socket
AC power input.
Caution: Never attempt to operate the TV on DC
power.
16
USB IN
Used for viewing multimedia files.
17
LAN
For connecting to a control network.
18 SERVICE
ONLY
Used for software updates.
STAND INSTRUCTIONS
■
Image shown may differ from your TV.
32/37/42LG710H
DETACHMENT
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the parts of the S TAND BODY
with the STAND BASE of the TV.
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Remove the four screws that hold the base on.
Detach the stand from the TV.
PREPARATION
INSTALLATION
STAND BODY
STAND BASE
Insert the stand as shown.
x4
Tighten the stand with the
four screws (provided as parts
of the TV).
or
PROTECTION COVER
After removing the stand, install the included
p rotection cover over the hole for the stand.
Press the PROTECTION COVER into the TV
until you hear it click.
Tighten the two of these four screws
x 2 and the two Torx plus star head screws
(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).
x2
! NOTE
When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
installation). Do not over tighten.
19
PREPARATION
32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H
PREPARATION
INSTALLATION
DETACHMENT
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
Assemble the parts of the S TAND BODY
with the STAND BASE of the TV.
STAND BODY
Remove the screws that hold the stand on.
AC IN
CABLE MANAGEMENT
M4 x 20
STAND BASE
Assemble the TV as shown.
Detach the stand from TV.
AC IN
AC IN
CABLE MANAGEMENT
CABLE MANAGEMENT
x4
Tighten the stand with the
four screws (provided as parts
of the TV).
or
Tighten the two of these four screws
x 2 and the two Torx plus star head screws
(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).
x2
! NOTE
20
When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
installation). Do not over tighten.
PROTECTION COVER
After removing the stand, install the included
p rotection cover over the hole for the stand.
Press the PROTECTION COVER into the TV
until you hear it click.
32/37/42LV555H
INSTALLATION
DETACHMENT
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
AC IN
CABLE MANAGEMENT
PREPARATION
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
AC IN
CABLE MANAGEMENT
Assemble the parts of the S TAND BODY
with the STAND BASE of the TV.
Remove the screws that hold the stand on.
STAND BODY
M4 x 20
STAND BASE
Assemble the TV as shown.
Install the 4 screws into the holes shown.
M4 x 14
! NOTE
When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
installation). Do not over tighten.
21
PREPARATION
47/55LV555H
INSTALLATION
DETACHMENT
PREPARATION
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
Assemble the parts of the S TAND BODY
with the STAND BASE of the TV.
STAND BODY
M4 x 12
STAND BASE
Assemble the TV as shown.
Install the 4 screws into the holes shown.
M4 x 12
! NOTE
22
When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
installation). Do not over tighten.
Remove the screws that hold the stand on.
CABLE MANAGEMENT
■
Image shown may differ from your TV.
32/37/42LG710H
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
To help prevent the power cable from being
removed by accident, secure the power
cable with the included P ROTECTIVE
BRACKET /SCREW. The 32LG710H use a
Plug-in type Holder instead of using a
screw.
! NOTE
PROTECTIVE BRACKET/SCREW
Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.
- If the TV is dropped, you may be injured or the
product may be broken.
With some TVs, the PLUG-IN TYPE HOLDER
and the CABLE HOLDER are included. If these
holders are inserted into the hole provided on
back of the TV, they cannot be removed.
Or
PLUG-IN TYPE HOLDER
(For 32LG710H model)
Put the cables inside the CABLE MANAGEMENT
CLIP and snap it closed.
PREPARATION
Open the CABLE MANAGEMENT CLIP as
shown.
If a CABLE HOLDER was included with your
TV, install it as shown.
CABLE MANAGEMENT CLIP
CABLE HOLDER
23
PREPARATION
32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H
PREPARATION
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
To help prevent the power cable from being
removed by accident, secure the power cable
with the included PROTECTIVE BRACKET
/SCREW. The 32/37/42LD650H,
32/37/42LD655H, 32/37/42LD660H,
32/37/42LD665H use a Plug-in type
Holder instead of using a screw.
Put the cables inside the CABLE MANAGEMENT
CLIP and snap it closed.
AC IN
AC IN
! NOTE
PROTECTIVE BRACKET/SCREW
Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.
- If the TV is dropped, you may be injured or the
product may be broken.
With some TVs, the PLUG-IN TYPE HOLDER
and the CABLE HOLDER are included. If these
holders are inserted into the hole provided on
back of the TV, they cannot be removed.
Or
PLUG-IN TYPE HOLDER
(For 32/37/42LD650H,
32/37/42LD655H,
32/37/42LD660H,
32/37/42LD665H
model)
Open the CABLE MANAGEMENT CLIP as
shown.
If a CABLE HOLDER was included with your
TV, install it as shown.
AC IN
CABLE MANAGEMENT CLIP
CABLE HOLDER
(For 32/37/42LD650H,
32/37/42LD655H,
32/37/42LD660H,
32/37/42LD665H
model)
24
32/37/42/47/55LV555H
Gether and bind the cables with the cable
holder on the TV back cover.
PREPARATION
25
PREPARATION
DESKTOP PEDESTAL INSTALLATION
■
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
PREPARATION
4 inches
4 inches
4 inches
4 inches
CAUTION
Ensure adequate ventilation by following the clearance recommendations.
Do not mount near or above any type of heat source.
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction to suit your viewing position.
20°: 47/55LD650H,
47/55LV555H
90°: Other Models
26
ATTACHING THE TV TO A DESK
The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product.
32/37/42LG710H
Stand
PREPARATION
4-Screws
(not provided as parts of the product)
Desk
Recommended screw size: M5 x L (*L: Table depth + 8~10mm)
ex) Table depth: 15mm, Screw: M5 x 25
32/37/42LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H, 32/37/42LV555H
Type 1
Type 2
Stand
or
4-Screws
2-Screws, 2-Washers, 2-Nuts, 4-Rubbers
(not provided as parts of the product) (provided as parts of the product)
Desk
You can select any type of attachment (Type 1 or Type 2)
Do not over tighten.
27
PREPARATION
47/55LD650H, 47/55LV555H
Stand
PREPARATION
4-Screws
(not provided as parts of the product)
Desk
EXCEPT 47/55LD650H, 47/55LV555H
Stand
1-Screw
(provided as parts of the product)
Desk
WARNING
28
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV may cause injury.
VESA WALL MOUNTING
VESA (A * B)
Model
32LG710H
200 * 100
Standard Screw
Quantity
M4
Wall Mounting Bracket
(sold separately)
RW230
37LG710H,
42LG710H
200 * 200
M6
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact an installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
AW-47LG30M
AW-47LG30M
32LD650H,
32LD655H,
32LD660H,
32LD665H,
32LV555H
200 * 100
37LD650H,
37LD655H,
37LD660H,
37LD665H,
37LV555H,
42LD650H,
42LD655H,
42LD660H,
42LD665H,
47LD650H
200 * 200
42LV555H,
47LV555H
55LD650H,
55LV555H
400 * 400
M4
LSW100B, LSW100BG
M6
LSW200B, LSW200BG
M6
LSW400B, LSW400BG
29
PREPARATION
! NOTE
PREPARATION
Screw length needed depends on the wall mount
used. For further information, refer to the instructions included with the mount.
Standard dimensions for wall mount kits are shown
in the table.
When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
Do not use screws longer then the standard dimension, as they may cause damage to the inside of
the TV.
For wall mounts that do not comply with the VESA
standard screw specifications, the length of the
screws may differ depending on their specifications.
Do not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.
LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installation instructions.
CAUTION
30
Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
■
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■
PREPARATION
■
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■
Use a sturdy rope (sold separately) to tie the product. It is safer to
tie the rope so it becomes horizontal between the wall and the product.
! NOTE
Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
31

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mch
Create Date                     : 2011:09:01 01:56:49-07:00
Modify Date                     : 2011:09:01 01:56:49-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2011:08:31 15:47:16+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : SAC34134301-Edit1
Creator                         : mch
Document ID                     : uuid:3541fa13-c750-499d-94f6-e69e71c2020f
Instance ID                     : uuid:9c460127-0ee3-4d45-9ab3-7e786a65b0d5
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Page Count                      : 31
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BEJ55LV555HUA

Navigation menu