LG Electronics USA 60PC1DUE Plasma Display Panel User Manual 38289U0527F LG

Download:
Mirror Download [FCC.gov]
Document ID	685049
Application ID	hHa/4Ptt32oIL4OyrivUnw==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.36kB (1467018 bits)
Date Submitted	2006-07-21 00:00:00
Date Available	2006-07-21 00:00:00
Creation Date	2006-07-20 11:41:46
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2006-07-20 11:41:52
Document Title	38289U0527F(LG)
Document Creator	QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Document Author:	PSY

Installation
HDSTB Setup
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if
you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure
as shown below.
When connecting with a HDMI cable
SERVICE
RGB IN
(PC)
REMOTE
CONTROL IN
Connect the HDMI output of the digital set-top
box to the HDMI/DVI IN jack on the set.
RS-232C IN
(CONTROL & SERVICE)
SERVICE)
Select HDMI/DVI input source with using the
INPUT button on the remote control.
Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
AUDIO IN
(RGB/DVI)
HDMI IN
1(DVI)
COMPONENT IN
AV OUT AV IN 1
Digital Set-top Box
HDMI-DTV OUTPUT
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
• TV can receive the video and audio signal simultaneously using a HDMI cable.
• If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will
be automatically set to 1280x720p.
• If the digital set-top box does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to
1280x720p.
REMOTE
CONTROL IN
When connecting with a Component cable
RS-232C IN
(CONTROL & SERVICE)
Digital Set-top Box
Connect the video
outputs (Y, PB, PR) of the digiSERVICE
RGB IN
tal set-top box to the COMPONENT
IN VIDEO
jacks on the set.
(PC)
(R) AUDIO (L)
OPTICAL
PTICAL
(PC)
DIGITAL AUDIO
DIGITAL
OUT
Turn on the digital set-top RS-232C
box.IN (Refer to the
& SERVICE)
owner’s manual for the digital(CONTROL
set-top
box.)
Select Component 1 input source with using the
INPUT button on the remote control.
- If connected to COMPONENT 2, select
Component 2 input source.
(MONO)
S-VIDEO VIDEO
AUDIO
AV
V OUT AV
V IN 1
RGB IN
COMPONENT IN
AUDIO
VIDEO
Signal
RGBAUDIO
IN IN
REMOTE
CONTROL IN
REMOTE
CONTROL IN
Connect the audio output of the digital set-top box
to the COMPONENT
IN AUDIO jacks on the set.
HDMI / DVI IN
AUDIO IN
(RGB/DVI)
Component1/2
HDMI/DVI
480i
Yes
No
480p/720p/1080i
Yes
Yes
(RGB/DVI)
RS-232C IN
(CONTROL & SERVICE)
21
SERVICE
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
HDMI / DVI IN
REMOTE
CONTROL IN
1(DVI)
RS-232C IN
(CONTROL & SERVICE)
Installation
S-VIDEO VIDEO
AUDIO
AV OUT AV IN 1
OPTICAL
DIGITAL AUDIO
OUT
COMPONENT IN
AUDIO
VIDEO
When connecting with a HDMI to DVI cable
SERVICE
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
REMOTE
CONTROL IN
HDMI IN
1(DVI)
RS-232C IN
(CONTROL & SERVICE)
SERVICE)
DVI-DTV OUTPUT
(R) AUDIO (L)
Digital Set-top Box
Connect the DVI output of the digital set-top box to the HDMI/DVI IN jack on the set.
Connect the audio outputs of the set-top box to the AUDIO (RGB/DVI) jack on the set.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
RGB IN
(PC)
RGBAUDIO
IN IN
REMOTE
CONTROL IN
(RGB/DVI)
Select HDMI/DVI input source with using the INPUT button on the remote control.
RS-232C IN
(CONTROL & SERVICE)
• If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is necessary.
• If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will
be automatically set to 1280x720p.
• If the digital set-top box does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to
1280x720p.
22
Installation
AV Out Setup
- The TV has a special signal output capability which allows you to hook up a second TV or monitor.
AUDIO
(MONO)
S-VIDEO VIDEO
AUDIO
AV
V OUT AV
V IN 1
OPTICAL
PTICAL
DIGITAL AUDIO
DIGITAL
OUT
COMPONENT IN
VIDEO
Connect the second TV or monitor to the TV’s AV
OUTPUT jacks.
See the Operating Manual of the second TV or
monitor for further details regarding that device’s
input settings.
1/2
• Component 1-2, RGB-PC, HDMI/DVI, DTV
input sources cannot be used for Monitor out.
• We recommend to use the video and audio
output jacks for VCR recording.
S-VIDEO IN
(R) AUDIO (L) VIDEO
Digital Audio Output
- Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output Optical port.
AUDIO
1/2
(MONO)
S-VIDEO VIDEO
AUDIO
AV
V OUT AV
V IN 1
OPTICAL
PTICAL
DIGITAL AUDIO
DIGITAL
OUT
COMPONENT IN
VIDEO
Connect one end of an optical cable to the TV
Digital Audio Optical Output port.
Connect the other end of the optical cable to the
digital audio optical input on the audio equipment.
See the external audio equipment instruction
manual for operation.
When connecting with external audio equipments, such as amplifiers or speakers, please
turn the TV speakers off. (Refer to p.41)
CAUTION
Do not look into the optical output port. Looking at the laser beam may damage your vision.
23
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
REMOTE
CONTROL IN
Installation
RS-232C IN
(CONTROL & SERVICE)
PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting with a D-sub 15 pin cable
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
Connect the RGB output of the PC to the RGB
(PC) jack on the set.
Connect the PC audio outputs to the AUDIO
(RGB/DVI) jack on the set.
Turn on the PC and the set.
Select RGB-PC input source with using the
INPUT button on the remote control.
REMOTE
CONTROL IN
RS-232C IN
(CONTROL & SERVICE)
SERVICE)
(R) AUDIO (L)
RGB-PC OUTPUT
PC
When connecting with a HDMI to DVI cable
SERVICE
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
HDMI IN
REMOTE
CONTROL IN
1(DVI)
RS-232C IN
(CONTROL & SERVICE)
DVI-PC OUTPUT
(R) AUDIO (L)
PC
Connect the DVI output of the PC to the HDMI/DVI IN jack on the set.
Connect the audio outputs of the PC to the AUDIO (RGB/DVI) jack on the set.
Turn on the PC and the set.
Select HDMI/DVI input source with using the INPUT button on the remote control.
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
REMOTE
CONTROL IN
• If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
• If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of PC graphics card's output resolution to
1024x768, 60Hz.
RS-232C IN
(CONTROL & SERVICE)
24
Installation
1. Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
2. When Source Devices connected with HDMI/DVI
Input, output PC Resolution (VGA, SVGA, XGA,
WXGA), Position and Size may not fit to
Screen.Press the ADJUST button to adjust the
screen Position of TV SET and contact an PC
graphics card service center.
3. When Source Devices connected with HDMI/DVI
Input, output TV SET Resolution (480p, 720p,
1080i. 1080p) and TV SET Display fit EIA/CEA861-B Specification to Screen. If not, refer to the
Manual of HDMI/DVI Source Devices or contact
your service center.
4. In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL"
OSD display in HDMI/DVI Input. In case that Video
Resolution is not supported TV SET output in
HDMI/DVI Source Devices, "INVALID FORMAT"
OSD display. Refer to the Manual of HDMI/DVI
Source Devices or contact your service center.
5. Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC, HDMI/DVI mode. If
noise is present, change the PC or HDMI/DVI
mode to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be
changed, change the PC graphic card or consult
the manufacturer of the PC graphic card.
6. Avoid keeping a fixed image on the TV's screen for
a long period of time. The fixed image may become
permanently imprinted on the screen.
7. The synchronization input form for Horizontal and
Vertical frequencies is separate.
Supported Display Resolution
(RGB-PC, HDMI/DVI Mode)
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
640x350
31.468
70.08
720x400
31.469
70.08
640x480
800x600
31.469
59.94
37.879
60.31
1280x768
1360x768
47.7
60
47.7
60
1366x768
47.1
60
1024x768
48.363
60.00
Resolution
* 720x480
*1280x720
*1920x1080
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.469
59.94
31.500
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
* This format is only for HDMI-DTV input.
25
Installation
Screen Setup for PC mode
- When RGB connect to PC input and select the RGB-PC, this function is used.
- When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.
- After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
* Adjustment for screen Resolution, Position, Size, and Phase
INPUT
TV
MODE
TV
POWER
DVD
INPUT
VCR
RATIO
COMP1 COMP2
EZ PIC
HDMI
RGB-PC
EZ SOUND ADJUST
INFO
ADJUST
CC
MENU
SAP
EXIT
TIMER
Press the ADJUST button and then use D
Resolution, POSITION, SIZE, or PHASE.
Press ENTER button and then use
make appropriate adjustments.
Mini Glossary
Position This function is to adjust
picture to left/right and
up/down as you prefer.
Size
Phase
This function is to minimize
any vertical bars or stripes
visible on the screen background. And the horizontal
screen size will also
change.
This function allows you to
remove any horizontal noise
and clear or sharpen the
image of characters.
/E
button to select
D /E /F /G
buttons to
• The PHASE adjustment range is -16 ~ +16.
(In HDMI/DVI-PC mode, PHASE is not available.)
• The SIZE adjustment range is -30 ~ +30.
(In HDMI/DVI-PC mode, SIZE is not available.)
Press ENTER button.
* When you change the resolution, select the proper resolution
in present input to see the best picture appearance.
Resolution This function allows you
select
Resolution
of
XGA/WXGA.
* Initializing (Reset to original factory values)
INPUT
TV
MODE
POWER
RATIO
VCR
COMP1 COMP2
EZ PIC
TV
DVD
INPUT
HDMI
EZ SOUND ADJUST
RGB-PC
INFO
ADJUST
- To initialize the adjusted values
26
Press the ADJUST button and then use
the RESET option.
Press ENTER button and then use
Press ENTER button.
F /G
D /E
button to select
button to select Yes.
Operation
Operation
Basic operation
Turning on the TV
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the
, INPUT, CH D / E button on the TV or press the POWER, TV
INPUT, INPUT, CH D / E, Number (0 ~ 9) button on the remote control .
2. Select the viewing source by using TV INPUT, INPUT button on the remote control.
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
Volume Adjustment
D / E button to adjust the volume.
2. If you want to switch the sound off, press the MUTE button.
1. Press the VOL
3. You can cancel this function by pressing the MUTE or VOL
button.
Channel Selection
Press the CH
or NUMBER buttons to select a channel number.
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
On Screen Menus Language Selection
Aspect Ratio
Aspect Ratio
Caption/Text
Caption/Text
Caption Option
Caption Option
Language
Language
ISM Method
ISM Method
Low Power
Low Power
- The menus can be shown on the
screen in the selected language.
First select your language.
Press the MENU button and then use
OPTION menu.
Press the
button and then use
English
Español (Spanish)
Français (French)
button to select the
button to select Language.
Press the G button and then use D / E button to select your desired
language. From this point on, the on-screen menus will be shown in the
selected language.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
27
Operation
On Screen Menus Selection and Adjustment
How to adjust the OSD screen
1. Press the MENU button and then
2. Press the G button and then use
D /E /F /G
button to select each menu.
button to display the available menus.
EZ Scan
EZ Picture
Manual Scan
Color Temperature
Channel Edit
XD
DTV Signal
Advanced
Input Source
Video Reset
Input Label
Set ID
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Input Block
Audio Language
Aspect Ratio
Auto Clock
Caption/Text
Manual Clock
Caption Option
Off Timer
Language
On Timer
ISM Method
Sleep Timer
Low Power
Auto Off
EZ SoundRite
EZ Sound
Balance
TV Speaker
• Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
28
Operation
Setup Menu Options
EZ Scan (Channel Search)
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
Selection ( G or
) leads you
to the EZ scan screen.
Processing EZ scan...
TV Ch.20
0 channel(s) found
Press
to stop the
current scan and start
CABLE channel scan.
Next
- Automatically finds all channels
available through antenna or
cable inputs, and stores them in
memory on the channel list.
- Run EZ Scan again after any
Antenna/Cable connection changes.
- A password is required to gain
access to EZ Scan menu if the
Lock System is turned on.
MENU Previous
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use
D /E
button to select EZ Scan.
Press the ENTER button to begin the channel search.
Allow EZ Scan to complete the channel search cycle for ANTENNA, and
CABLE.
Manual Scan
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
Select channel type and
RF-channel number.
TV
TV 2-0
Press
to delete the
channel
- A password is required to gain
access to Manual Scan menu if
the Lock System is turned on.
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use
ber you want to add or delete.
Press the ENTER button to add or delete for the channel number.
Press the G button and then use D
/E
button to select Manual Scan.
Press the G button and then use D
and CADTV.
/E
button to select TV, DTV, CATV,
D /E
button to select channel num-
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
29
Operation
Channel Edit
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
Selection ( G or
) leads
you to the channel edit
screen.
* Custom List
- There are two different ways in
order to add or delete scanned
channels. One is "Custom List"
and the other is "Favorite List" in
the channel list. Both of them are
available after EZ Scan on the
SETUP menu.
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button. You will now see a screen filled with channel numbers and a preview picture.
- A Custom List can be created by
toggling each channel on or off
with ENTER button. The channels in the Custom List are displayed in black color, and the
channels deleted from the
Custom List are displayed in gray
color. Once a channel is highlighted you can add or delete the
channel by referring to the small
window at the top-left corner of
the screen.You can create your
own Favorite List. Use the FAV
button on the remote control
when a channel is highlighted
and then you can add or delete
the channel to/from the Favorite
List.
Use D / E / F / G button to select a channel and then use the ENTER
button to add or delete it. Press FAV button to add the channel to the
Favorite List. The heart-mark will appear in front of that channel number.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
30
Press the G button and then use D
/E
button to select Channel Edit.
Operation
Setup Menu Options continued
DTV Signal Strength
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
- Shows how strong your DTV signal is and whether you need to
adjust your antenna or digital
cable input. The higher the signal
strength, the less likely you are
to experience picture degradation.
- DTV Signals: Only when the
input signal is DTV or CADTV,
this function is available.
Bad
Normal
Good
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use
D /E
button to select DTV Signal.
View the on-screen signal strength monitor to see the quality of the signal
being received.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Input Source
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
- Changes the picture source so
you can watch your TV, cable TV,
VCR, DVD, or any other devices
that are connected to your TV.
TV
AV1
AV2
Component1
Component2
RGB-PC
HDMI/DVI
Press the G button and then use D
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Press the MENU button and then use D / E button to select the SETUP menu.
/E
button to select Input Source.
Press the G button and then use D / E button to select the source:
TV, AV1, AV2, Component1, Component2, or RGB-PC, or HDMI/DVI.
• To toggle RGB-PC, select RGB-PC and press G button.
31
Operation
Input Label
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
- Sets a label to each input source
or lets you skip the input source
which is not in use when you
press INPUT button.
32
AV1
Cable Box
AV2
VCR
Component1
DVD
Component2
Set Top Box
RGB-PC
HDMI/DVI
PC
Game
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use D
/E
button to select Input Label.
Press the G button and then use D / E button to select the source: AV12, Component1-2, RGB-PC or HDMI/DVI.
Press the
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
F /G
button to select the label.
Operation
V ideo Menu Options
Auto Picture Control ( EZ Picture)
- EZ Picture adjusts the TV for the best
picture appearance. Select the preset
value in the EZ Picture menu based
on the program category.
- Daylight, Normal, Night Time settings are preset for optimum picture
quality at the factory and are not
adjustable.
- In the User 1, and User 2 modes only,
user can directly adjust the contrast,
brightness, color, sharpness, tint.
Press the EZ Pic button repeatedly to select the picture appearance setup option as shown below:
Daylight, Normal, Night Time, User 1 and User 2(your own settings).
• You can also use the VIDEO menu to adjust EZ Picture.
Press the EXIT button to save and return to TV viewing .
Color Temperature Control
EZ Picture
EZ Picture
Color Temperature
Color Temperature G
Cool
XD
XD
Medium
Advanced
Advanced
Warm
Video Reset
Video Reset
User
- Choose one of three automatic
color adjustments. Set to warm
to enhance hotter colors such as
red, or set to cool to see less
intense colors with more blue.
Press the MENU button and then use D / E button to select the VIDEO menu.
Press the G button and then use D / E button to select Color Temperature.
Press the G button and then use D
Medium, or Warm.
/E
button to select either Cool,
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
33
Operation
Manual Color Temperature Control
EZ Picture
EZ Picture
Color Temperature
Color Temperature
Cool
XD
XD
Medium
Advanced
Advanced
Warm
Video Reset
Video Reset
User
Selection ( G or
) leads you
to the detailed setting
screen.
Red
User
Red
Green
Blue
Press
- You can also adjust the detailed set
tings(Red, Green, Blue) by selecting
the User menu.
to confirm.
Press the MENU button and then use
VIDEO menu.
Temperature .
34
MENU
Press the
button and then use
D /E
D /E
button to select the
button to select Color
Press the G button and then use D
/E
button to select User .
Press the G button and then use D
Green or Blue .
/E
button to select Red,
Press the G button and then use F / G button to make appropriate adjustments.
• The adjustment range of Red, Green or Blue is -20~ +20.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Operation
XD
EZ Picture
EZ Picture
Color Temperature
Color Temperature
XD
XD
Advanced
Advanced
Video Reset
Video Reset
- XD is LG Electronic’s unique picture
improving technology to display a
real HD source through an
advanced dig-ital signal processing
algorithm.
- When selecting EZ Picture options
(Daylight, Normal and Night time),
XD is automatically change to Auto.
- When selecting EZ Picture options
(User 1 and User 2), you can
choose the Auto / Manual and when
selecting Manual, you can adjust
the XD Contrast, XD color and XD
Noise.
XD Contrast On
Press the MENU button and then use D
menu.
Press the
button and then use
Manual
/E
D /E
Press the G button and then use D
Manual.
/E
XD Color
On
XD Noise
On
button to select the VIDEO
button to select XD.
button to select Auto or
* Selecting the Manual
1. Press the G button and then use F / G button to select XD
Contrast, XD Color or XD Noise.
XD Contrast :Optimizing the contrast automatically according
to the
brightness of the reflection.
XD Color :Adjusting the colors of the reflection automatically
to repro-duce as closely as possible to the natural colors.
XD Noise :Removing the noise up to the point where it does
not damage the original picture.
2. Use the
D /E
button to make appropriate adjustments.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
35
Operation
Advanced-Cinema 3:2 Mode / Black Level
EZ Picture
EZ Picture
Color Temperature
Color Temperature
XD
XD
Advanced
Advanced
Video Reset
Video Reset
• Cinema 3:2 Mode
- Set up the TV for the best picture
appearance for viewing movies.
When you operate Cinema (3:2 PullDown Mode or Cinema Correction
Mode),the TV will adjust 24 fps video
from movies to 30 fps video for display
(This function is only available in
Analog,AV1,AV2,Component 480i
mode.)
• Black level
- Adjusting the contrast and the brightness
of the screen using the black level of the
screen.
This feature operates only in HDMI/DVI
or AV1, AV2 mode.
Cinema 3:2 Mode
Black Level
Off
Low
1 Press the MENU button and then use D / E button to select the VIDEO
menu.
the G
2 Press
Advanced .
button and then use
/ E
button to select
Press the G button and then use D / E button to select
3 Cinema
3:2 Mode or Black Level.
* Selecting the Cinema 3:2
* Selecting the Black Level
Mode
Press the
4 use
button and then
D /E
button to select On or Off .
Press the G button and then
use D / E
button to select Low or
High.
Low
The reflection of the screen gets
darker.
High
The reflection of the screen gets
brighter.
Press EXIT button to return to TV viewing or press MENU button
5 to
return to the previous menu.
36

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 16
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1e10a4a9-9e32-4b6b-9e59-d6fafe9e6bdf
Modify Date                     : 2006:07:20 11:41:52+09:00
Create Date                     : 2006:07:20 11:41:46+09:00
Metadata Date                   : 2006:07:20 11:41:52+09:00
Document ID                     : uuid:2ff9c177-18cb-4bc0-abf0-d25fbf6733a7
Format                          : application/pdf
Title                           : 38289U0527F(LG)
Creator                         : QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Author                          : PSY
Producer                        : Acrobat Distiller 4.0 for Macintosh

EXIF Metadata provided by EXIF.tools