LG Electronics USA 9QK-N41 Portable Navigation User Manual N41 MANUAL 2

Download:
Mirror Download [FCC.gov]
Document ID	904241
Application ID	Oj2Yi2WIYVIhtVfs7Hq+PQ==
Document Description	User manual 2 of 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.59kB (544817 bits)
Date Submitted	2008-02-21 00:00:00
Date Available	2008-02-21 00:00:00
Creation Date	2008-02-20 06:39:10
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2008-02-20 06:39:10
Document Title	N41_MANUAL-2.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	ltsai

Getting started with navigation
General operation
Finding and storing a destination on
the map
1. Turn the unit on.
The map screen appears.
Note
• If you don’t want to store a destination,
touch
Current
position
2. Select a destination by simply touching
and dragging the map on the screen.
on the screen.
• Touch
on the screen to move to
the previous screen.
Finding the stored destination
1. Touch
touch
on the map screen and then
3. Touch
to find a destination.
Drive in accordance with the screen and
voice prompts.
The destination is stored in the “Recent
Places” menu automatically. (Page 20)
2. Touch group that the destination is stored
in and then touch
Touch
if you want to store the
destination.
3. Touch the destination you want and then
touch
4. Set the group you want to store by
touching
and then touch
The destination is stored in the “My
Places” menu. (Page 20)
4. Touch
to find the destination.
Drive in accordance with the screen and
voice prompts.
16
Getting started with navigation
Map screen
10
1.
: Touch to zoom out.
2.
3.
: Touch to view the navigation menu.
8. Battery indicator
- On the screen of the unit, the charging
status will be displayed as follows:
: Touch to view the 2D/3D map.
: Full mode
: Medium mode
: Low mode
4. Displays next turn direction and distance
to the next turn.
Touch to view the “Turn by Turn” menu
(Page 24).
: Empty mode
: Charging
: Full charged
5. Displays the remaining distance and time
that the trip will take. If remaining time
gets touched, it will display estimated time
of arrival. Bottom of the bar displays the
name of the current street you are on.
- If the battery level is low, the following
message will be will be displayed and
then the device will be turned off a few
seconds later.
6. Recevies the latest traffic information
using FM multiplex broadcast.
7.
: Indicates that the unit is receiving
GPS signal and not found your current
location.
: Indicates that the unit has not
received GPS signal and found your
current location.
9.
: Touch to zoom in.
10. Displays the name of the next turn street.
17
Navigation menu
Navigation menu list
MENU
Address
City-Street
Street-City
Cross streets
Zip code
General operations of
navigation menu
1. Turn the unit on.
2. Touch
to view the navigation menu on
the map screen.
Recent Places
My Places
POI
Route
Manager
Food
Lodging
Shopping
Fuel and
Auto Services
Transportation
Entertainment
Bank/ATM
Attraction
Emergency/
Medical
Goverment
Offices
Sports
Others/
Personal
3. Touch
,or
to select
the desired option, and the menu moves
to the second level.
4. Touch the desired option and the menu
moves to the third level.
5. Touch the desired setting.
Some items require additional steps.
Note
• Touch
on the screen to move to
the previous screen.
• Touch
on the screen to move to the
map screen.
Turn by Turn
Route Summary
Route Playback
Multistop Planner
Cancel Route
Route Options
Traffic Info
Setup
Media Player
Map
18
Navigation menu
Address
You can find a destination using the address
search.
1. Touch
on the map screen and then
touch
2. Touch
. Touch a state you want using
the keyboard and then touch
4. Enter characters of address using keyboard provided as shown. The characters
entered in the address field are highlighted
in red
Deletes the last character in the address
such as town or street names.
Extends or shortens the address list by
hiding or displaying the keyboard.
Moves up or down the list of address
items.
Displays uppercase, numeric, and special
characters. The operating system installed
on the device must be able to support
these characters.
Note
3. Touch the desired items.
Sometimes, it may take some time to search
the letters of address you entered using
keyboard.
5. Touch the street using the keyboard and
then touch
Selects the address in city, street, house
number order using the keyboard.
Selects the address in street, city, house
number order.
6. Touch the house number using the
keyboard and then touch
Selects the address in city, street, cross
streets order.
7. Touch
Selects the address in zip code, street,
house number order.
19
to find the destination.
Navigation menu
Recent Places
My Places
Your device can store up to total of 64 recent
findings in the “Recent Places” list.
You can search the recent finds in the
“Recent Places” list.
You can search the places stored in the “My
Places” list.
Finding and storing the destination in
the “Recent Places”
1. Touch
touch
Finding the destination in the “My
Places”
1. Touch
on the map screen and then
touch
on the map screen and then
2. Touch a recent place you want to find and
then touch
Note
If you want to delete all entries in the
“Recent Places” list, touch
and
then touch
. If you want to delete only
the selected destination, touch
and then touch
3. Touch
to find the destination.
Drive in accordance with the screen and
voice prompts.
Touch
if you want to store the
destination.
4. Set the group you want to store by
touching
and then touch
The destination is stored in the “My
Places” menu. (Page 20)
2. Touch the group you want and then touch
3. Touch the place you want and then touch
4. Touch
to find the destination.
Drive in accordance with the screen and
voice prompts.
Setting a group
You can add, delete or edit the group in the
“My Places” list.
Note
You can not delete or edit the “Home” folder.
20
Navigation menu
Adding a group
1. Touch
Changing the group name
1. Touch
2. Touch the group you want to edit and then
touch
2. Enter the new group name and an icon to
identify the group, as shown below and
then touch
The new group is added as shown below.
Note
The icon identifies all places located in this
group, as displayed on the map.
3. Change the group name or the group icon.
4. Touch
The selected group is changed.
Deleting the group
1. Touch
2. Touch a group you want to delete and
then touch
Alerting
The unit can sound the alert when the distance you set is closer than destination.
1. Touch
3. Touch
The selected group is deleted.
2. Touch
> Change the “Set Alert distances” using the / >
Note
The distance of “2nd Alert” is set closer than
that of “1st Alert”.
21
Navigation menu
Setting the destination
Points Of Interest (POI)
You can show, edit or delete the place in the
“My Places” list.
The POI list is a collection of hundreds of
interesting or useful places organized by
easy-to-find categories. For example, you can
use the unit to guide you to a shopping center, hotel, restaurant, or gas station.
1. Touch
2. Touch a group you want and then touch
Finding a place in the “POI” list
1. Touch
touch
3. Touch
items.
on the map screen and then
and then touch the desired
2. Touch one of “POI” you want from the list.
Note
You can search the selected place on the
map.
You can view additional “POI” list , if you
touch
Touch
on the screen. And then drive
in accordance with the screen and voice
prompts.
3. Select the “POI CATEGORY”,
“SUBCATEGORY” and “LOCATION” you
want to search and then touch
You can change the name, comment, or
the group of selected destination.
You can delete selected place.
If you touch
, the selected place is
deleted.
4. Touch
to find the destination.
Drive in accordance with the screen and
voice prompts.
Note
The “POI” list may not be shown on the “POI
CATEGORY” and “SUBCATEGORY” menu.
22
Navigation menu
Setting the destination
Finding a destination with near place
You can show and add the place in the “POI”
list. And you can sort the place in alphabetical
and distance order. You can store in “My
places” menu the places in the “POI” list.
You can find a place you want by searching a
near place.
1. Touch
1. Touch
in the “POI CATEGORY” or
“SUBCATEGORY” list.
in the “LOCATION” list.
2. Touch the desired items.
2. Touch the desired items.
You can search the place near the current
location.
You can search for the selected place on
the map.
Touch
on the screen. And then drive
in accordance with the screen and voice
prompts.
You can search the place near the
destination when you set the destination.
You can search the POI near the address
when you set the address.
Follow the steps 2-6 of “Address” on the
page 19.
You can store the place in the “My Place”
menu.
Set the group you want to store by
touching
and then touch
The place is stored in the “My Places”
menu. (Page 20)
You can search for the POI within the
radius you set.
You can sort the place in alphabetical
order.
23
Navigation menu
Route Manager
Turn by Turn
You can set the route you wish to use when
you navigate a destination.
1. Touch
then touch the list you want.
. And
Route Playback
You can record your route while you’re driving
and view the recorded route.
1. Touch
The recording starts.
2. Touch the desired item.
You can view the entire route on the
screen.
2. Touch
to
stop recording.
3. Select the data file to play the recording
and then touch
The navigator plays the recorded route on
the main map screen.
4. Touch
to
stop the playback .
Route Playback Options
Touch
on the “Route Playback” menu
and then touch the desired items.
You can only view the turn you select.
You can also view the previous or next
turn by touching
You can avoid the selected turn in the
turn-by-turn list. The new route is recalculated automatically.
Route Summary
You can view an overview of your complete
route on the map screen, the total driving
distance to your destination, the estimated
travel time, and the complete destination
address.
1. Touch
Deletes a selected recording.
Note
Deletes all recordings.
Touch
on the screen to move to the
previous screen.
Adjust the playback speed. The range is
from 100% to 300%.
24
Navigation menu
Multistop planner
Route options
You can plan a route with up to 5 stops.
When you touch the “Go” button, the route is
calculated in each stage, from the departure
point to the first stop. When you reach the first
stop, the next route is calculated to the second stop, and so on.
You can use Route options to determine what
road categories to avoid or allow and to set
the default route type when navigation calculates your selected destination.
1. Touch
touch the desired items.
Avoid roads
Toll, Highway, and Ferry route sections are
avoided or allowed as determined by
whether they are selected, when navigator
calculates a route. You cannot allow or
avoid specific toll roads or ferry routes.
Route condition
Fastest: This option selects the route that
takes the least amount of time.
Fastest is the default value.
Shortest: This option selects the route that
is the shortest distance.
Remember, the shortest route
may not always be the quickest,
as you are able to travel faster on
some roads than on others.
Setting stops along the route
1. From the “Select/Add Multistop Route”
screen, touch the “Add” button to add a
stop by Address, POI, My Favorites, or
Recent Locations.
2. Select one of these options, specify a
location, and touch the “OK” button.
(If you touch
, follow the
steps 2-6 of “Address” on the page 19.)
3. The “Select/Add Multistop Route” screen
appears with the selected location.
Use the “Up” or “Down” buttons to change the
order of your itinerary.
: Use the “Edit” button to show or
delete a highlighted entry.
: Use the “Distance” button to organize your entries from closest to farthest distance from your current
location. (This is only available when
the stored route is more than four.)
. And then
2. Touch
Note
Route generation excludes any detours, stops
or delays along the route.
Taking a detour
If you need to take a detour when you are navigating a route, touch
Cancel route
If you no longer need to travel to your destination or if you want to change your destination.
Touch
After you select a distance to take a detour,
touch
25
Navigation menu
TMC (Traffic Information)- Optional
3. Touch “OK” button when ready.
What is Traffic Message Channel
(TMC)- Optional
The Traffic Message Channel (TMC) is a
specific application of the FM Radio Data
System (RDS) used for broadcasting
real-time traffic and weather information. Data
messages are received silently, decoded, and
delivered to a TMC enabled navigation
system that can offer dynamic route guidance
alerting the driver of a problem on the planned
route and calculating an alternative route to
avoid the incident.
Connect your TMC antenna (Optional)
The car charger plays the part of the TMC
antenna.
Connect the car charger on the unit.
Disclaimer (Optional)
The developer is not responsible for any
damage caused by an accident due to
unreliable TMC radio transmissions by
national, regional, or local broadcasters
caused by TMC service restrictions, or by
natural and man-made conditions that prevent
real-time traffic and weather information from
being delivered to the TMC-enabled
navigation system.
The developer is not responsible for the
quality or accuracy of the events broadcasted
and the method they are displayed.
Note
You can use the free 90 day traffic trial service.
Select “OK” to start your 90 days free trial now.
Traffic Message Alerts (Optional)
Traffic (TMC) messages are national and
regional public radio FM transmissions that
are used to inform drivers of traffic, weather,
and other driving conditions.
The traffic messages are displayed in the
TMC Inbox screen, which can be opened by
touching the traffic info. button in menu.
1. From the Navigation menu, select the
“Traffic Info” button, which opens the TMC
inbox, and displays traffic reports.
2. You can select a traffic report and tap “OK”
to show a map of the affected road.
If you click the “Avoid” button, the
Navigation recalculates your route.
Service Information (Optional)
When you are in an FM TMC service area,
your navigator receives traffic signals as soon
as you connect TMC module to your navigator. You need to be in range of an FM station
transmitting TMC (Traffic Message Channel)
data to receive traffic information.
You do need to subscribe to traffic service.
1. Visit http://us.lge.com/navigation to
subscribe and receive an activation code.
2. When visiting the website, note your
navigator’s serial number.
Note
• If the event was avoided, the Show Map screen
displays the “Allow” button to recalculate to that
previously avoided route section.
• All TMC messages are delivered to the TMC
Inbox, but only messages relating the direct
route and 200 meter radius are displayed.
The radius is set to 160 kilometers when no
route has been selected.
26
Navigation menu
Traffic Info Options (Optional)
Test TMC: (USA only)
You can touch the “Options” button, the
“Options” dialog box is displayed, as shown
below.
These options have already been preconfigured for the best performance. It’s not advisable to change them. However, you can
change the Traffic Info. Option configurations
by selecting the following settings:
When you tap this button, The Navigation
expands the search radius for to the "Whole
Map" for one minute and switches automatically to the TMC Inbox screen and Displays
one test message called "Testing TMC
Service". After one minute, navigator reverts
to the route and the 200 meter radius.”
If you do not receive any message after tapping this button, please check in the following
order:
Dynamic Rerouting
ON- The Navigation automatically
recalculates the route to avoid a road
with adverse traffic conditions – traffic
jam or accident only.
OFF- You can manually select the TMC event
from the inbox and tap the “Avoid” button from the Show Map screen.
1. If you see the tuner scanning but not locking on a TMC station, try to change your
position and check that you have put your
antenna vertically upright.
2. Depending on your location, you may not
have TMC coverage.
3. Make sure that you are using the map of
the country that you are currently traveling
in.
Note
Please make sure your navigation unit
acquires the GPS signal before starting Traffic
service free trial or subscription.
(Current position icon will turn green when
GPS signal is acquired)
If you complete traffic service free trial without
acquiring GPS signal, the unit may not display
the accurate expiration date.
However, if the unit acquires GPS signal after
completing traffic service free trial or subscription, the expiration date will be automatically
adjusted and displayed correctly on the
screen.
27
Navigation menu
Setup
Display
You can make various adjustments to items
by using the setup menu.
1. Touch
Display
Units & Time
Language
Guidance
GPS Status
Map Setup
Tutorial
Help
Start Demo
Select Map
Initialise
Setup
2. Touch the desired items.
The 2D and 3D Mode buttons lets you
display the map view in 2-dimensional or
3-dimensional views for either day or night
driving.
1. Touch
The Day and Night Mode buttons lets you
display the map view for either day or
night driving.
The Auto button automatically adjusts the
map view for day or night driving by GPS
time.
The Pedestrian Mode button lets you toggle between travelling as a pedestrian or
in a vehicle.
When in Pedestrian Mode, you can generate a route up to ten kilometers and you
are not limited by vehicle constraints, such
as one way streets.
When creating a pedestrian route, the
navigator avoids motorways or other roads
where pedestrians would not travel.
Voice prompts are deactivated in this
mode.
2. Touch the desired items.
For details, refer to the pages 26-29.
Note
• Touch
on the screen to move to the
previous screen.
• Touch
on the screen to move to the
map screen.
3. Touch
28

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2008:02:20 06:39:10-08:00
Modify Date                     : 2008:02:20 06:39:10-08:00
Page Count                      : 13
Creation Date                   : 2008:02:20 14:39:10Z
Mod Date                        : 2008:02:20 14:39:10Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : ltsai
Metadata Date                   : 2008:02:20 14:39:10Z
Creator                         : ltsai
Title                           : N41_MANUAL-2.pdf

EXIF Metadata provided by EXIF.tools