LG Electronics USA DT-EG PERSONAL COMPUTER User Manual EGEM
LG Electronics USA PERSONAL COMPUTER EGEM
Contents
- 1. USERS MANUAL 1
- 2. USERS MANUAL 2
- 3. USERS MANUAL 3
- 4. USERS MANUAL 4
- 5. USERS MANUAL 5
USERS MANUAL 1
P/N:3828BPH009A EG/EM series Rev.00 EG/EM series P/N: 3828BPH009A(Rev.00) Copyright 2004 LG Electronics, Inc., DigitalMate Co., Ltd. Thank you for using the LG product. LG has manufactured and tested this product to provide you with a reliable computing environment. Please read this manual carefully before using the computer. This sign calls attention to features and operations that may be dangerous to the user. Follow the instruction closely to reduce the risk of bodily harm or damage to the equipment 1.Warning: Not following the instruction could result in death or serious injury. 2.Caution: Not following the instruction could result in minor or moderate injury and/or damage to the product. This User's guide is for EG/EM model. Instructions may be different depending on models. Check your model before reading User's guide. Keep User's guide at a place where other users always can reach Þ Microsoft, MS, MS-DOS, and Windows are trademarks of Microsoft Corporation. Þ IBM, IBM Personal Computer, PS/2 and PC AT are trademarks of International Business Machine Corporation. Þ is a trademark of LG. Þ Copyright 2004 LG Electronics, Inc., DigitalMate Co., Ltd. Þ Information in this manual may include technical inaccuracies or typographical errors. Images in this manual are for illustrative purposes only and may be different from the actual product. Þ LG reserves the rights to make improvements and/or changes to the product without notice. Þ Reproducing any or all of the information contained in this publication without written permission is prohibited. Þ This computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Contents Contents..................................................................................................................................... 1 Important Safety Instructions .................................................................................................. 2 1. Installing the system 1-1 Package contents..................................................................................................................................... 9 1-2 Components........................................................................................................................................... 10 1-3 Installing the computer ........................................................................................................................... 14 1-4 Attaching external devices(customer purchased devices) ..................................................................... 16 2. Using the system 2-1 Turning on the computer ........................................................................................................................ 18 2-2 Using Windows XP................................................................................................................................. 21 2-3 Turning off the computer ........................................................................................................................ 28 2-4 Restarting the computer......................................................................................................................... 29 2-5 Using Mouse .......................................................................................................................................... 30 2-6 Cleaning the mouse ............................................................................................................................... 32 2-7 Using keyboard ...................................................................................................................................... 33 2-8 Using the optical disk driver ................................................................................................................... 35 2-9 Using the disk drive................................................................................................................................ 39 2-10 Computer virus..................................................................................................................................... 42 3. System Setup 3-1 Starting the system setup....................................................................................................................... 48 3-2 Booting with a bootable floppy disk........................................................................................................ 50 3-3 Setting a password................................................................................................................................. 51 3-4 Changing or removing the password ..................................................................................................... 52 3-5 Recovering the factory default settings .................................................................................................. 54 3-6 Using power saving funtion .................................................................................................................... 55 4. System Recovery ................................................................................................................ 58 5. Reinstalling the drive 5-1 Reinstalling the printer driver ................................................................................................................. 60 5-2 Reinstalling the sound driver.................................................................................................................. 64 5-3 Reinstalling the video driver ................................................................................................................... 65 6. System Expansion 6-1 Opening the computer case ................................................................................................................... 66 6-2 Main board ............................................................................................................................................. 67 6-3 Connectors............................................................................................................................................. 68 6-4 Replacing the CPU................................................................................................................................. 70 6-5 Increasing the memory.......................................................................................................................... 75 6-6 Adding a hard disk drive......................................................................................................................... 79 6-7 Installing expansion cards...................................................................................................................... 87 Specifications ..................................................................................................................... 89 Contents Important Safety Instructions These safety instructions will ensure many years of safe enjoyment from the product. Read this safety instructions carefully before installing the computer. Installing the computer Do not operate your computer near water; for example, in a bathroom. The computer may not function correctly, and there is the risk of electric shock. Operate the computer within a temperature range of 41 to 95ĕ (5Ë~35Ë) and 30 to 80% of relative humidity. Safely dispose of the packing materials, such as desiccant and plastic bags. Children may swallow desiccant or suffocate from plastic bags. Keep your computing environment clean and free of dust. There is a risk of dysfunction to the computer. Keep away from the moisture condensation. It may damage on the computer. If this happens, turn off the computer and make it dry before power is on. Do not place any object within 15cm of the computer. The computer may overheat and result in fire or injuries. Keep your computer away from electromagnetic fields. Exposure to the electromagnetic field may result in loss of data in the hard disk drive and/or damage to the monitor. Important Safety Instruntions Connecting to the power Do not use loose or damaged power plugs. There is a risk of electric shock or fire. Use a correct voltage outlet. There is a risk of fire or electric shock. Use properly grounded outlet. Connecting the computer to an outlet without proper grounding may result in electric shock and damages to your computer. Use your computer at the proper voltage/current level indicated. There is a risk of fire or electric shock. Do not touch or grab the power plug with wet hands. There is a risk of fire or electric shock. If you hear a noise from the power cord or outlet, unplug the power cord immediately, and contact the customer service for help. There is a risk of fire or electric shock. Hold the plug body when removing the power cord from an outlet. There is a risk of fire and damages to the computer. Make sure the power plug fits snugly into the electrical outlet. Loose fit may result in fire. Keep near the power cable and power cord clean. There is a risk of fire. If an object or liquid enters the computer or an adaptor, remove power cord, battery, and any other cables from the computer, and contact the customer service for help. There is a risk of an electric shock, fire, or damage to the computer. Important Safety Instruntions Use properly grounded outlet. Connecting the computer to an outlet without proper grounding may result in electric shock and damages to your computer. Use your computer at the proper voltage/current level indicated outlet. There is a risk of fire or electric shock. Do not bend or place a heavy object on top of the power cord. Keep the children and pets from damaging the power cord. Damaged power cord may result in electric shock or fire. Using the computer For cleaning your computer, use mild detergent or computer cleaning products. Be sure to dry completely before using the computer. Using the computer without completely drying it may result in electric shock or fire. During a lightning storm, disconnect the power cord, telephone line, and LAN cable from the computer. There is a risk of electric shock or fire. Do not place water, chemicals, or liquid of any kind on the computer. Liquid of any kind entering inside the computer may result in an electric shock, fire, or damage to the computer. Do not connect the modem directly to a multi-line telephone. There is a risk of fire or damage to the computer. If you drop your computer, remove the power cord and battery pack, and then contact the customer service for check. There is a risk of electric shock or fire. Do not expose your computer to the direct sunlight. The computer may overheat and result in fire or injuries. Important Safety Instruntions Do not place a burning candle or cigarette on the computer. There is a risk of fire or damage to the computer. If you see or smell smoke from the computer or adaptor, turn off the computer, remove the power cord, and then contact the customer service for help. There is a risk of fire. Upon completion of any service or repairs, ask service technician to perform safety checks. Ignoring safety checks may result in electric shock or fire. Keep the computer away from heat. The computer may deform and there is the risk of fire. Turn on the external devices first and then in order of. There is a risk of damage to the computer. Turn off the external devices first and then in order of. There is a risk of damage to the computer. Use only the proper devices to the connector. There is a risk of damage to the computer. Do not use any damaged CD or floppy disk. There is a risk of damage to the computer or injuries. Use the Wireless LAN at least 5meters away from a microwave oven or plasma lamp. When using the Wireless LAN near a plasma lamp, use the channel 11, 12, or 13. The connection can be unavailable or slow. Do not press eject button while the CD-ROM or floppy drive is in use. Data can be lost and there is a risk of injuries. Place the memory card in a correct position when inserting it. There is a risk of damage to the memory. Do not drop the parts of computer. There is a risk of injuries or damage to the computer. Important Safety Instruntions Carrying and storing the computer Before moving the computer, turn the power off and remove all the cables. You may trip over the loose cables and fall. Upgrading the computer Keep screws and other small parts away from children. Children may choke on a screw or other small part. If a child swallows a small part, receive a medical care. Do not disassemble the power supply devices. There is a risk of an electrical shock. Before disassembling the computer for upgraing purposes, turn off the power and remove the power cord, phone line and battery pack. There is the risk of electric shock or fire. If you need to open the computer cover, contact the Technical support for help. Do not attempt to disassemble or modify the computer without consulting Technical support. you need to open the computer cover, contact the Technical support for help. There is a risk of an electrical shock. Always refer to the User's Guide. There is a risk of an injuries. Replace only with the parts approved by LG. There is a risk of fire or damage to the computer. Consult with the customer service before connecting and using the computer with any non-LG product. There is a risk of damage to the computer. Important Safety Instruntions Preventing data loss (handling hard disk drives) Be cautious when handling the hard disk drive. Þ Þ The hard disk drive is very delicate to any physical impact. Always make backups for your data LG is not responsible for the data lose caused by users. The data on the hard disk or the drive itself may be damaged in the following situations. Exposure to a physical shock during the disassembling or installing process The computer is reset (rebooted), for example by power outage, while the hard disk drive is operating. Þ Exposure to computer virus Þ The computer is turned off during operation Þ Þ To prevent data loss due to hard disk drive damages, always backup your data. LG is not responsible for the loss of data. Important Safety Instruntions Help and Support 1. Click [Help and Support] to learn how to solve problems you may encounter while using the computer. Click [Start] - [Help and Support]. 2. The following window appears. You can search for useful Help and Support information. Click to learn the features and troubleshooting information. Helf and support You can connect to the Internet and ask for assistance online. You can setup and configure your computer to personalize your computing environment. 1. Installing the system 1-1. Package contents The following items are included in this package. Match the items below with the items in your package. Some items may look different from the pictures. When cleaning your computer, use cleaning products manufactured specifically for computing equipment. Using abrasive chemicals, such as paint thinner, benzene, or alcohol, may damage your computer. Computer Keyboard Mouse 7URXEOHVKRRWLQJJXLGH Power code User's guide Modem cable LG Giljabi CD ( Software Installations CD) Trouble-shooting guide Recovery CD Installing the system 1-2. Components Front view ℜ ℝ ℚ ℙ ℘ ℛ 10 Installing the system ℞ ℟ ℠ ℘ Power button Turns the power on/off the computer. ℙ Power/ Hard disk drive status indicator Indicates whether the computer is on and the hard disk drive is in use(blinking indicates the hard disk drive is in use). Note ã Depending on the hard disk drive, the indicator may not blink and simply goes off during multiple operations. ℚ Floppy disk drive Enables reading from and writing to a 3.5 inch floppy disk. ℛ Floppy disk drive button Floppy disk drive button is used when insert/eject floppy into floppy disk drive. ℜ CD-ROM drive button Is used when insert/eject CD into CD drive. ℝ CD-ROM drive Enables reading a data, video, or audio CD. (Your computer may have a CD-RW or DVD-ROM drive depending on the model.) ℞ Audio connector Headphone connector : Connects to headphones. Microphone connector : Connects to a microphone. ℟ USB connector Connects to a USB device or HUB. For example, you can connect to a USB mouse, digital camera, or external hard disk drive. ℠ Computer holder Holds the computer safely when the computer stands alone. Note ã Your computer supports USB 2.0. ã Your computer may have different features and configuration from the computers shown above. Installing the system 11 Rear view ℘ ℙ ℚ ℡ ℝ ℜ ℛ ℞ ℠ ℟ ⌅ ⌆ Note ã EM model does not support No℡,⌅, ⌆ ã Your computer may have different features and configuration from the computers shown above. ã Power specifications may be different depending on the country or region, check the power specifications before use. 12 Installing the system ℘ Powerconnector Connects to the power cord for supplying power to your computer. ℙ Keyboard connector Connects to a PS/2 keyboard. ℚ Mouse connector Connects to a PS/2 mouse. ã Never disassemble the power supply. ã There is a risk of fire, electric shock, and/or injuries. ℛ USB connectors Connect to USB devices or HUB. For example, you can connect to a USB mouse, digital camera, or external hard disk drive. ℜ Parallel connector Connects to a parallel device such as printer or scanner. ℝ Serial connector Connects to a serial device. ℞ Video connector Connects to a monitor. ℟ Audio connector Microphone connector : Connects to an external microphone. Line-in : Connects to external audio device. Speaker connector: Connects to an external speaker. ℠ LAN Enables network connection between HUB and UTP (wire connection). ≕ IEEE1394 6pin connector Connects to IEEE1394 pin devices, such as exter-nal hard disk or CD-RW drive. ⌅ TV-Out connector Connects to external devices such as Television. ⌆ Video connector Connects to a monitor cable. Note ã Modem cable is offered for models that support modem card. Installing the system 13 1-3. Installing the computer Installing your computer may be easier than you think. Before the installation, be sure to turn off the computer and other peripheral devices. The mouse and keyboard connectors look identical; therefore, check the icons above the connectors before attaching the mouse and keyboard. Your computer may be installed with different expansion cards from the picture below. Some items may look different from the picture. ℛ ℘ℙ ℚ Note ã For USB mouse users, USB connectors are located both the front and rear of the computer. ã Do not place a glass or container with water, chemicals, or liquid of any kind in it on the computer. There is a risk of electric shock and/or damage to the computer. 14 Installing the system ℘ Connecting a keyboard The keyboard cable has a round connector with 6 pins. Align the pins and holes, and attach the keyboard cable to the computer as shown in the picture. ℙ Connecting a mouse The mouse cable has a round connector with 6 pins. The round connector on the mouse cable fits into the PS/2 connector on the rear of the computer. Be sure to align the 6 pins on the cable with the corresponding holes on the connector. ℚ Keyboard stand The keyboard stand is located at the bottom of the keyboard. Lift the stand to use the keyboard more comfortably. ℛ Connecting to power Power supply is 110V/220V (selection) or 220V only. Attach the power cord to the computer and then plug the power cord into a wall socket. ã Power supply is 110V/220V (selection) or 220V only. ã Check the location of the switching button when 110V/220V (selection) is used. 220V use 110V use ã Operate the product at the proper voltage when selecting 110V or 220V power supply. Incorrect use of power supply may damage on the product or fire. Installing the system 15 1-4. Attaching external devices(customer purchased devices) EG Model ℝ ℚ ℙ ℜ ℞ ℘ ℛ EM Model ℝ ℙ ℚ ℘ ℜ ℞ ℛ Note ã Your computer may have different features and configuration from the pictures shown above. ã Do not overload an electrical outlet with connections to multiple devices. Overloading an electrical outlet may result in fire or electric shock. ã Do not place the computer or other devices on the cables as they may be damaged. ã Do not touch the power cord or plug with wet hands. Doing so may result in electric shock. 16 Installing the system Connecting a monitor(customer purchased device) The monitor cable and power cord are included with the monitor. For using the monitor, refer to the user manual that comes with the monitor. When installing video card When using built-in video ℘ Connect the monitor cable to the video card. The monitor cable sends signal from the computer to monitor. ℙ Connect the power cable to the monitor and plug it into an electrical outlet. The power cord supplies power from the electrical outlet to monitor. You must turn on and off the monitor with the power button on the monitor. To supply to supply power to the monitor, check the power specification of the monitor before attaching the power cord to the computer. Connecting a printer(customer purchased device) The printer cable and power cord are included with the printer. For using the printer, refer to the user manual that comes with the printer. ℚ Connect the printer cable to the parallel connector on the computer. ℛ Connect the printer cable to the parallel connector on the printer. ℜ, ℝ Connect the power cord to the printer and plug it into an electrical outlet. Connecting a speaker(customer purchased device) Your computer does not have built-in speakers. You must attach an external speaker to out put sound. ℞ Connect a speaker cable to the speaker connector on the real of the computer. Note ã Adjust sound volume by using C-Media 3d Audio configuration icon from the taskbar. Installing the system 17 2.Using the system 2-1.Turning on the computer Make sure if there is nothing in Floppy disk and see if the computer is well connected to the power cable and other external device drivers. You should complete registration process. Start registration process following the instruction after turning on the computer. Registration process ⓞ Pressing the power switch starts the self-diagnostic procedures; then Windows(R) XP startup screen is displayed .In a moment, a dialogue box, saying "Welcome to Microsoft Windows" appears on the screen. Then Click [Next]. ⓟ After "Help protect your PC" message appears on the screen, select "Help protect my PC by turning on Automatic Updates now" and then press [Next]. 18 Using the system ⓠ Internet connection option screen appears, follow the instruction. ⓡ If you turn the power on the computer for the first time, you have to register your copy of Windows XP. The registration process may differ depending on the model, but the difference does not affect the use of your computer. ⓢ "Who will use this computer?" message appears on the screen. Type the names of the users and click [Next]. Using the system 19 ⓣ "Thank you!" message appears on the screen. Click [Finish] to complete the registration process. Windows Certificate Windows Certificate includes the product number which proves your Windows Operating System is original product. Please always keep this certificate with you. The Windows Certificate you have may look different from the picture. 20 Using the system
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 22 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:5eb8856c-f527-46a0-b3da-f3d0c923a1b7 Modify Date : 2004:12:27 08:07:49-05:00 Create Date : 2004:12:27 08:07:19-05:00 Metadata Date : 2004:12:27 08:07:49-05:00 Document ID : uuid:673112db-d759-44f3-a0ac-babe8a83a6fe Format : application/pdf Title : EGEM_.....qxd Creator : PScript5.dll Version 5.2.2 Author : Owner Producer : Acrobat Distiller 5.0.5 (Windows)EXIF Metadata provided by EXIF.tools