LG Electronics USA DT-EG PERSONAL COMPUTER User Manual EGEM

LG Electronics USA PERSONAL COMPUTER EGEM

USERS MANUAL 5

Download: LG Electronics USA DT-EG PERSONAL COMPUTER User Manual EGEM
Mirror Download [FCC.gov]LG Electronics USA DT-EG PERSONAL COMPUTER User Manual EGEM
Document ID501377
Application IDBdAd/FWKD1ZMpAohewRBTA==
Document DescriptionUSERS MANUAL 5
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize97.07kB (1213365 bits)
Date Submitted2004-12-28 00:00:00
Date Available2004-12-23 00:00:00
Creation Date2004-12-27 08:11:54
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2004-12-27 08:12:05
Document TitleEGEM_.....qxd
Document CreatorPScript5.dll Version 5.2.2
Document Author: Owner

Hard disk drive setup
â“ž Turn on the computer and monitor.
â“Ÿ Press [Delete]key when the logo screen appears.
â“  The CMOS Setup Utility opens.
Phoenix-Award BIOS CMOS Set up Utility
Äš Standard CMOS Features
Äš PC Health Status
Äš Advanced BIOS Features
Äš Frequency/Voltage Control
Äš Advanced Chipset Features
Load Optimized Defaults
Äš Integrated Peripherals
Set Password
Äš Power Management Setup
Save & Exit Setup
Äš PnP/PCI Configurations
Exit Without Saving
Esc : Quit
êëè é : Select ltem
F10 : Save & Exit Setup
Virus Protection, Boot Sequence...
â“¡ Use arrow >â’·@>â’¸@>â’µ@, and >â’¶@ keys to select Standard CMOS Features, and
press [Enter].
78
System Expansion
â“¢ Use arrow >â’·@>â’¸@>â’µ@, and >â’¶@ keys to select IDE Channel 0 Slave, and press
[Enter].
Phoenix-Award BIOS CMOS Set up Utility
Standard CMOS Features
Data (mm:dd:yy)
Time (hh:mm:ss)
Äš IDE Channel 0 Master
Äš
Äš IDE
IIDEChannel
Channel0 0Slave
Slave
Äš IDE Channel 1 Master
Äš IDE Channel 1 Slave
Drive A
Drive B
Video
Halt On
XXX, XXX, XXXX
XX, XX, XX
Press EnterXXXXXMB
Press
PressEnter
Enter None
None
Press Enter None
Press Enter None
X.XXM, X.Xin
None
EGA/VGA
All, But Keyboard.
CPU Type
BIOS Version
Video Memory
System Memory
Total Memory
X.XXX.XXX.XX
Build ID :LG
X.XX K
X.XX K
X.XX K
êëèé:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
F7:Optimized Defaults
â“£ After setting IDE Channel 0 Slave to Auto by pressing [Enter], press [Enter] in
IDE HDD Auto-Detection so the system automatically recognizes the newly
installed slave hard disk drive.
Phoenix-Award BIOS CMOS Set up Utility
IDE Channel 0 Slave
IDE HDD Auto-Detection 3UHVV(QWHU
Press Enter
IDE Channel 0 Slave
Access Mode
Auto
$XWR
Auto
Capacity
0 MB
Cylinder
Head
Precomp
Lauding Zome
Sector
Item Help
Menu Level
Äš
To auto-detect the
HDD±s size, head...on
this channel
êëèé:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
F7:Optimized Defaults
ⓤ Press [F10] to save the new setting.
â“¥ If the following message appears, press [Enter]. The computer restarts.
SAVE to CMOS and EXIT(Y/N)? Y
System Expansion
79
Hard disk setup (Hard disk with factory default setting)
Be careful, Using  to divide partition delete data in a selected driver.
â“ž Click [Start] and [Run].
â“Ÿ Type 'diskmgmt.msc' and press [OK].
â“  If the following window appears, select disk1. Click right button on the mouse to
select New partition.
â“¡ Click [Next] if the following message appears.
80
System Expansion
â“¢ Select a partition and click [Next].
â“£ Select the maximum size and click [Next].
A selected space of the
disk will be available to
use.
ⓤ Click [Next] after selecting a drive value.
System Expansion
81
â“¥ If the following window appears, select File system, Allocation unit size and
Volume label ,and click [Next].
ⓦ New Partition Wizard is complete, click [Finish].
ⓧ After the format is complete, the hard disk operates normally.
82
System Expansion
6-6. Installing expansion cards
When you are using the computer, you may need to install expansion cards to
improve funtionality. The following instruction describes how to install expansion
cards.
â“ž Refer to Opening the computer case to open the computer case cover.
â“Ÿ Remove the capas shown on the picture.
ã Always use a screwdriver to open
the case cover. There is the risk of
injury.
ã In order not to be injured when
disassembling the computer, wear
the gloves.
â“  Remove 2 screws as shown on the picture.
â“¡ Use the driver and remove the metal slot cover.
(Remove it, only when installing an additional extension card.)
System Expansion
83
â“¢ Hold the expansion card with both hands and align the expansion card and slot.
Push down evenly to insert the card into the slot.
ã Incorrect installation of an expansion
card may damage the main board
and result in a computer malfunc
tion.
Expansion slot
â“£ Fasten a screw after installing a metal bracket.
metal bracket
ã Using the computer without closing
the case may result in fire, electric
shock, injury, and/or damage to the
computer.
ⓤ Close the cap in the same position as you removed it.
â“¥ Refer to Closing the computer case to close the case cover of the computer.
ⓦ Install the driver program for the new expansion card.
84
System Expansion
Specifications *(*(0PRGHO
Ú Specifications below differ depending on the models.
CPU
System memory
Intel Pentium 4 / Celeron mPGA478 type (2.4GHz or above)
256MB (up to 2.0 GB) - If built-in VGA is used, maximum 16MB
and minimum 1MB is applied for Video Frame buffer in DOS
Mode, but Windows Mode automatically manages the video
memory (up to 96MB depending on System Memory size).
Cache memory
L1: 8KB/16KB or above, L2: 128KB/256KB/512KB/1024KB or
above.
Hard disk drive
40GB or above (E-IDE type)
Floppy disk driver
One 3.5inch 1.44MB drive
Keyboard
PS/2 keyboard (104keys)
Mouse
PS/2 mouse or USB (ball / wheel)
Video
Integrated or external AGP graphic
Sound
Built-in AC'97 audio. Support MIC-IN, SPEAKER-OUT and
LINE-IN.(Support virtual 5.1 channel output)
LAN
Integrated 10/100Base-T Ethernet
USB
6ports (support USB 2.0)
Serial I/O
One RS-232C (9pins)
Front I/O
Two USB ports and audio ports (SPEAKER-OUT and MIC-IN)
Parallel I/O
One printer port (25pins)
IEEE1394
One IEEE1394(EG), Not installed(EM)
Extension slot
Product size
Cable
Power spec
Environmental
requirement
Three PCI slots, one AGP(EG only) slot and four memory DIMM slots
Width 100 x Height 345 x depth 421.5(mm).
Power cable length 1.8m
100~127 / 200~240VAC, 5A / 4A, 50/60Hz or
200~240VAC. 4A, 50/60Hz
Temperature:Average temperature:77ĕ(25Ë
Operating temperature:41ĕ~95ĕ (5~35Ë
Storage temperature:-4ĕ~131ĕ -25~55Ë Humidity:Average humidity:60%(RH)
Operating humidity:30%~80%(RH)/Storage humidity:30%~80%(RH)
Specifications
85
PHPR
memo
87
PHPR
88
memo

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 11
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c89e3d46-1fbd-4014-8d64-94ccfb0fb2b1
Modify Date                     : 2004:12:27 08:12:05-05:00
Create Date                     : 2004:12:27 08:11:54-05:00
Metadata Date                   : 2004:12:27 08:12:05-05:00
Document ID                     : uuid:3db8c8cb-7782-4695-af9e-3b6281e69c15
Format                          : application/pdf
Title                           : EGEM_.....qxd
Creator                         : PScript5.dll Version 5.2.2
Author                          : Owner
Producer                        : Acrobat Distiller 5.0.5 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BEJDT-EG

Navigation menu