LG Electronics USA DT-EG PERSONAL COMPUTER User Manual EGEM

LG Electronics USA PERSONAL COMPUTER EGEM

USERS MANUAL 5

System Expansion78ⓞTurn on the computer and monitor.ⓟPress [Delete]key when the logo screen appears.ⓠThe CMOS Setup Utility opens.ⓡUse arrow >Ⓑ@>Ⓒ@>⒵@, and >Ⓐ@keys to select Standard CMOS Features, and press [Enter].Hard disk drive setupPhoenix-Award BIOS CMOS Set up UtilityĚStandard CMOS Features ĚPC Health StatusĚAdvanced BIOS Features ĚFrequency/Voltage ControlĚAdvanced Chipset Features Load Optimized Defaults ĚIntegrated Peripherals Set PasswordĚPower Management Setup Save & Exit SetupĚPnP/PCI Configurations Exit Without SavingEsc : Quit êëè é : Select ltemF10 : Save & Exit SetupVirus Protection, Boot Sequence...
System Expansion 79ⓢUse arrow >Ⓑ@>Ⓒ@>⒵@, and >Ⓐ@keys to select IDE Channel 0 Slave, and press[Enter].ⓣAfter setting IDE Channel 0 Slave to Auto by pressing [Enter], press [Enter] inIDE HDD Auto-Detection so the system automatically recognizes the newlyinstalled slave hard disk drive.ⓤPress [F10] to save the new setting.ⓥIf the following message appears, press [Enter]. The computer restarts.Data (mm:dd:yy) XXX, XXX, XXXXTime (hh:mm:ss) XX, XX, XXĚIDE Channel 0 Master Press EnterXXXXXMBĚIDE Channel 0 Slave Press Enter None ĚIDE Channel 1 Master Press Enter None ĚIDE Channel 1 Slave Press Enter None Drive A X.XXM, X.XinDrive B NoneVideo EGA/VGAHalt On All, But Keyboard.CPU Type X.XXX.XXX.XXBIOS Version Build ID :LG Video Memory X.XX KSystem Memory X.XX KTotal Memory X.XX Kêëèé:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F7:Optimized DefaultsPress Enter NoneĚIIDE Channel 0 Slave IDE HDD Auto-DetectionPress EnterIDE Channel 0 Slave AutoAccess Mode AutoCapacity 0 MB Cylinder 0Head 0Precomp 0Lauding Zome 0Sector 0 Item HelpMenu Level ĚTo auto-detect theHDD±s size, head...onthis channelêëèé:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F7:Optimized Defaults$XWR3UHVV(QWHUSAVE to CMOS and EXIT(Y/N)? Y Phoenix-Award BIOS CMOS Set up UtilityIDE Channel 0 Slave Phoenix-Award BIOS CMOS Set up UtilityStandard CMOS Features
80 System ExpansionHard disk setup (Hard disk with factory default setting)ⓞClick [Start] and [Run].ⓟType 'diskmgmt.msc' and press [OK].ⓠIf the following window appears, select disk1. Click right button on the mouse toselect New partition.ⓡClick [Next] if the following message appears.Be careful, Using <diskmgmt.msc> to divide partition delete data in a selected driver.
81System ExpansionⓢSelect a partition and click [Next].ⓣSelect the maximum size and click [Next].ⓤClick [Next] after selecting a drive value.A selected space of thedisk will be available touse.
82 System ExpansionⓥIf the following window appears, select File system, Allocation unit size andVolume label ,and click [Next].ⓦNew Partition Wizard is complete, click [Finish].ⓧAfter the format is complete, the hard disk operates normally.
83System Expansion6-6. Installing expansion cardsWhen you are using the computer, you may need to install expansion cards toimprove funtionality. The following instruction describes how to install expansioncards.ⓞRefer to Opening the computer case to open the computer case cover.ⓠRemove 2 screws as shown on the picture.ⓡUse the driver and remove the metal slot cover.(Remove it, only when installing an additional extension card.)ãAlways use a screwdriver to openthe case cover. There is the risk ofinjury. ãIn order not to be injured whendisassembling the computer, wearthe gloves.ⓟRemove the capas shown on the picture.
System Expansion84ⓥRefer to Closing the computer case to close the case cover of the computer.ⓦInstall the driver program for the new expansion card.ⓣFasten a screw after installing a metal bracket.ⓢHold the expansion card with both hands and align the expansion card and slot.Push down evenly to insert the card into the slot.ãIncorrect installation of an expansioncard may damage the main boardand result in a computer malfunction.ⓤClose the cap in the same position as you removed it.Expansion slotmetal bracketãUsing the computer without closingthe case may result in fire, electricshock, injury, and/or damage to thecomputer.
85SpecificationsSpecifications *(*(0PRGHOFloppy disk driver One 3.5inch 1.44MB driveKeyboard PS/2 keyboard (104keys)Mouse PS/2 mouse or USB (ball / wheel)Video Integrated or external AGP graphicSound Built-in AC'97 audio. Support MIC-IN, SPEAKER-OUT andLINE-IN.(Support virtual 5.1 channel output)System memoryCache memory L1: 8KB/16KB or above, L2: 128KB/256KB/512KB/1024KB orabove.Hard disk drive 40GB or above (E-IDE type)LAN Integrated 10/100Base-T EthernetUSB 6ports (support USB 2.0)Serial I/O One RS-232C (9pins)Parallel I/O One printer port (25pins)IEEE1394 One IEEE1394(EG), Not installed(EM)Front I/O Two USB ports and audio ports (SPEAKER-OUT and MIC-IN)Extension slot Three PCI slots, one AGP(EG only) slot and four memory DIMM slotsProduct size Width 100 x Height 345 x depth 421.5(mm).Cable Power cable length 1.8mPower spec 100~127 / 200~240VAC, 5A / 4A, 50/60Hz or200~240VAC. 4A, 50/60HzCPU Intel Pentium 4 / Celeron mPGA478 type (2.4GHz or above)ÚÚSpecifications below differ depending on the models.256MB (up to 2.0 GB) - If built-in VGA is used, maximum 16MBand minimum 1MB is applied for Video Frame buffer in DOSMode, but Windows Mode automatically manages the videomemory (up to 96MB depending on System Memory size).Temperature:Average temperature:77ĕ(25ËOperating temperature:41ĕ~95ĕ(5~35ËStorage temperature:-4ĕ~131ĕ-25~55ËHumidity:Average humidity:60%(RH) Operating humidity:30%~80%(RH)/Storage humidity:30%~80%(RH)Environmental requirement
87memoPHPR
88 memoPHPR

Navigation menu