LG Electronics USA E2341VX Part15 Subpart B-LCD Monitor User Manual W19 2243S T ENG

LG Electronics USA Part15 Subpart B-LCD Monitor W19 2243S T ENG

Contents

BEJE2341VX_User Manual 2

10Control Panel FunctionsINPUT ButtonUse this button to turn the display on or off.The power indicator stays blue if the display is runningproperly (On Mode). If the display is in Sleep Modeblue. Power Button &Power IndicatorWhen more than two input signals are connected, you can select the input signal (D-SUB/DVI/HDMI) you want. When only one signal is connected, it is automatically detected.The default setting is D-Sub. (SOURCE Hot key)Exit the OSD(On Screen Display).EXIT Button SUPER ENERGY SAVING ButtonUse this button to enter SUPER ENERGY SAVING menus.For more information, refer to page 15 ., the power indicator is blinking (For D-SUB and DVI input)(Only for HDMI input)E2241V/E2341V/E2341VG/E2441V:1920 x 1080
en.s. / /.n123411
12On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus.To customize the screen statusfor a user's operatingenvironmentCOLOR PRESETLANGUAGEMENU To adjust the brightness ofthe screenNOTE The order of icons may differ depending on the model (13~17).BRIGHTNESSORIGINAL RATIOTo To adjust the black level of thescreen adjust the image sizeMain menu Sub-menu Supported inputDescriptionTo customize the color of the screenSUPERENERGYSAVINGTurn on the SUPER ENERGYSAVING function. Initialize the SUPER ENERGYSAVING and set to "OFF" mode. Turn off the SUPER ENERGYSAVING function.FACTORY RESETBLACK LEVELONOFFRESET
913,
14(Only HDMI input)
15
16Turn on the SUPER ENERGY SAV-ING function.Turn off the SUPER ENERGY SAV-ING function. Now the monitor is LED SAVING function.
Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor.LG accumulate those values using integrated function with 10 minutes broadcast v-ideo signal.LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. SUPER Saving means that how much power can be more saved using SUPER E-NERGY SAVING function. 1719 inch 20 inch 22 inch 23 inch 24 inchSAVING DATA:
18TroubleshootingNo image appearsCheck the following before calling for service.No image appearsDo you see a "OSD LOCKED" message on the screen?●Is the power cord of thedisplay connected?●Is the power indicatorlight on?●Is the power indicatorflickering?●Do you see an "OUT OFRANGE" message onthe screen?●Do you see a "CHECKSIGNAL CABLE"message on thescreen?• Check and see if the power cord is connectedproperly to the power outlet.• Press the Power button.• If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboard tobring up the screen.• Try to turn on the PC.• This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.• This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.• You can secure the current control settings,so that they cannot be inadvertently changed.You can unlock the OSD controls at any timeby pushing the MENU button for severalseconds: the message “OSD UNLOCKED” will appear.●Do you see “OSDLOCKED” when youpush MENU button?
19TroubleshootingDisplay image is incorrect●Display Position isincorrect.●On the screenbackground, verticalbars or stripes arevisible.●Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.• Press the AUTO button to automatically adjustyour display image to the ideal setting. • Press the AUTO button to automatically adjustyour display image to the ideal setting.• Press the AUTO button to automatically adjustyour display image to the ideal setting.• Check Control Panel --> Display --> Settingsand adjust the display to the recommendedresolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits(true color).IMPORTANTCheck Control Panel --> Display --> Settings and see if the frequency or theresolution were changed. If yes, readjust the video card to the recommendresolution.If the recommended resolution (optimal resolution) is not selected, letters may beblurred and the screen may be dimmed, truncated or biased. Make sure to selectthe recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
20Display image is incorrectTroubleshooting●The screen color ismono or abnormal.●The screen blinks.• Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.• Make sure the video card is properly inserted inthe slot.• Set the color setting higher than 24 bits (true color)at Control Panel - Settings.• Check if the screen is set to interlace mode and ifyes, change it to the recommend resolution.Do you see an "Unrecognized monitor, Plug&Play (VESADDC) monitor found" message?●Have you installed thedisplay driver?• Be sure to install the display driver from the displaydriver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver fromour web site: http://www.lg.com.• Make sure to check if the video card supportsPlug&Play function.The Audio function is not working●Picture OK & No sound.• Check whether volume is "0".• Check sound muted.• HDMI cable installed properly.• Head phone cable installed properly.• Check sound format. Not supply to compressedsound format.
21Specifications E2241V54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6cm0.248 mm x 0.248 mm (Pixel pitch)DisplayMax VESA 1920 x 1080 @60 HzRecommend VESA 1920 x 1080 @60 HzResolutionPlug&PlayOn Mode :24 W(Typ.)Sleep Mode ≤0.3 WOff Mode ≤0.3 WPowerConsumptionOperating ConditionsTemperature 10 ˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20 ˚C to 60 ˚CHumidity 5 % to 90 % non-CondensingEnvironmental ConditionsWith StandWidth 50.90 cm (19.80 inch) Heigh 38.80 cm (15.27 inch) Depth 16.60 cm ( 6.54 inch)Weight(excl. packing) 2.9 kg (6.39 lb)Dimensions& WeightTilt : -5˚ to 15˚RangeAttached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital,HDMI), DDC 2AB(Analog)Without StandWidth 50.90 cm (19.80 inch) Height 32.20 cm (12.67 inch) Depth 5.80 cm ( 2.28 inch)NOTEInformation in this document is subject to change without notice.AC 100-240 V~ 50 / 60 Hz 1.0 A Power Input
Specifications E2341V/E2341VG
2360.97 cmy:≤≤rtsd t h ))d t ).
24
Installing the Wall mount plateThis monitor satisfies the specifications of the Wall mount plate orthe interchange device.1. Place the monitor with its front facing downward on a soft cloth.2. Remove the Stand Body and Stand Base from product in correct direction as shown in the picture.25
26Installing the Wall mount plateWall mount plate(Separate purchase)This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mountplate is purchased.Kensington Security SlotConnected to a locking cable that canbe purchased separately at mostcomputer stores.<Screw Mounting Interface Dimension>Hole spacing : 75 mm x 75 mm.3.Install the Wall mount plate.NOTEVESA compatible only with respect to screw mounting interface dimensions and mounting screw specificationsPlease use VESA standard as below.* 784.8 mm and under (30.9 inch) - Wall Mount Pad Thickness : 2.6 mm- Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm * 787.4 mm and above (31.0 inch) - Please use VESA standard wall mount pad and screws.
Make sure to read the Safety Precautions before using the product.Keep the OWNER’S MANUAL(CD) in an accessible place for furture reference.The model and serial number of the SET is located on the back or one side of the SET. Record it below should you ever need service.MODELSERIALAs an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA).

Navigation menu