LG Electronics USA L01C PCS GSM Phone User Manual L 03B E Cover 100126

LG Electronics USA PCS GSM Phone L 03B E Cover 100126

Contents

User manual

30Basic Operation•   Kisekae Tool can also be set using the following steps. Stand-by display X M X I[Kisekae] X move the cursor to "i-mode"/"Preinstalled" X C[Open]•  To reset the setting, press M[Menu] on the Kisekae Tool list screen X "Reset screen display / sound setting" X enter the Terminal security code.InformationChanging Illumination when Receiving1Stand-by display X M X "Settings" X "Display" X "Lighting LED" X Move the cursor to "Lighting LED" X C[ON]2"Incoming voice call"/"Incoming video call"/"New mail" X Select an illumination pattern3I[Done]Checking Missed Calls or New Mails with Lighting1Stand-by display X M X "Settings" X "Display" X "Lighting LED" X Move the cursor to "Lighting LED" X C[ON]2Move the cursor to "Missed call" or "Unread message" X C[ON]3I[Done]•   The illumination for "Missed call" lights or blinks in Aqua color for approximately six hours at approximately fi ve second interval. The illumination for "Unread message" lights or blinks in Green color for approximately six hours at approximately fi ve second interval.InformationSaving Power ConsumptionSet the backlight brightness of the display to the lowest power saving level, and set the backlight to be turned off when 10 seconds elapsed after the last operation.1Stand-by display X M X "Settings" X "Other" X "eco mode" X "ON"/"OFF"•   Alternatively, press 5 for over 1 second in Stand-by to set/cancel the eco mode.Information
31Basic OperationLock/SecurityVarious Security Codes● Cautions on security codes•    Avoid setting security codes using your birthday, part of your phone number, your address or room number, "1111" or "1234" that can be easily guessed by others. Be sure to write down the set security codes and store them in a separate location.•    Do not reveal your security codes to others. DOCOMO is not responsible for damage caused by misuse of your security codes by others.•    If you forget your security codes, you need to bring your identifi cation document (driver's license, etc.), the FOMA terminal, and UIM to the docomo Shop. For details, contact "General Inquiries" at the back of this manual.•    PUK code is written in the application form (copy for subscriber) given at the time of contract. If you have subscribed at a place other than the docomo Shop, bring your identifi cation document (driver's license, etc.) and UIM  to the docomo Shop or contact "General Inquiries" at the back of this manual.Terminal security code (Default: 0000)You can change the Terminal security code by yourself.Stand-by display X M X "Settings" X "Lock/Security" X "Change security code"Network security code (At the time of contract: any number)The Network security code is a 4-digit number to be used for your identifi cation at an acceptance of order at the docomo Shop, docomo Information Center, or "お客様サポート (user support)", or for accessing network services. You can change the code by yourself.If you have "docomo ID and Password" for "My docomo", a total support site for a PC, you can change the Network security code from a PC. From i-mode, you can change it by accessing "iMenu" X "お客様サポート (user support)"  X "各種設定(確認・変更・利用) (settings (check/change/use))" X "ネットワーク暗証番号変更 (Change Network security code)".•    For "My docomo" and "お客様サポート (user support)", see the back side of the back cover of this manual (Japanese only).
32Basic Operationi-mode password (At the time of contract: 0000)The "i-mode password" is a 4-digit number required to register/remove contents in My Menu, and subscribe to/cancel the message service or fee-based i-mode services. (Some other information service providers may set individual passwords.)You can change the password by yourself.From i-mode, you can change it by accessing "iMenu" X "English" X "Options" X "Change i-mode Password".PIN1 code/PIN2 code (At the time of contract: 0000)You can set PIN1 and PIN2 codes to the UIM. PIN1 code is a 4- to 8-digit number to be entered to identify the user every time UIM is inserted into the FOMA terminal or the terminal power is turned on in order to prevent unauthorized use by third party. PIN2 code is a 4- to 8-digit number used to reset accumulated call charges, etc. You can change them by yourself. To change PIN1 code, set "PIN1 code request" to "ON" beforehand.Stand-by display X M X "Settings" X "Lock/Security" X  "PIN code" X Enter the Terminal security code X "Change PIN1 code"/"Change PIN2 code"PUK code (PIN unblock code)PUK code is an 8-digit number used to unblock PIN1 code or PIN2 code. You cannot change it by yourself.•    If you failed to enter PUK code10 times in a row, UIM is locked.Enter PIN1 codeEnter PIN2 codeEnter PUK code (PIN unblock code)Set new PIN1/PIN2 codeContact the docomo Shop.Failed 10 times in a rowOKFailed 3 times in a row
33Basic OperationVarious Lock FunctionsLock function DescriptionLock all Locks the FOMA terminal to prevent operations by others.1   Stand-by display X M X "Settings" X "Lock/Security" X "Lock" X "Lock all" X Enter the Terminal security code X "Yes"b  To cancel Lock allWhile Lock all is set, press M[Unlock] or press any dial key X enter the Terminal security code.If failed to enter the correct Terminal security code fi ve times in a row, the power automatically turns off.•    When Lock all is set, IC card lock is also set simultaneously.•    Emergency numbers (110, 119, 118) can be called during Lock all.(Only when UIM is inserted) While Lock all is set, press I[Emergency] X select an emergency number X C[OK].Lock function DescriptionOmakase LockLocks your personal data such as Phonebook and IC card functions of Osaifu-Keitai by calling DOCOMO when you lost the FOMA terminal.Setting/Canceling Omakase Lock 0120-524-360*  Available 24 hours a day (open all year round) (Japanese only)*   Unavailable from part of IP phones.•    Can be set/canceled from the My docomo site (Japanese only) using a PC.•    For details on Omakase Lock, see "Mobile Phone User's Guide [i-mode] FOMA version".Call/Mail lock Disables outgoing calls, address entries with dial keys, incoming calls or display of mail messages, etc. to prevent operations of the FOMA terminal by others.1   Stand-by display X M X "Settings" X "Lock/Security" X "Lock" X "Call/Mail lock" X Enter the Terminal security code2   Move the cursor to "Call/Mail lock" X C[ON] X Mark items to restrict3  I[Done]
34Basic OperationLock function DescriptionSelf mode Disables all functions that require communication, such as making/receiving calls, using i-mode, or sending/receiving mails.1   Stand-by display X M X "Settings" X "Call/VT/Dialing" X "Self mode" X "Yes"/"No"Data access lockSpecifi es and locks functions to prevent unauthorized use by others.1   Stand-by display X M X "Settings" X "Lock/Security" X  "Lock" X "Data access lock" X Enter the Terminal security code2   Move the cursor to "Data access lock" X C[ON] X Mark functions  to lock3   I[Done]Lock function DescriptionAuto key lock Sets the key lock automatically when the time set in "Display duration" elapses without any operation of the FOMA terminal.1   Stand-by display X M X "Settings" X "Lock/Security" X  Move the cursor to "Auto key lock" X C[ON/OFF]•    Canceling the key lock temporarily→ P21Display Call/Mail logsHides redial call, received call, sent mail, and received mail logs.1   Stand-by display X M X "Settings" X "Lock/Security" X "Display Call/Mail logs" X Enter the Terminal security code2   Move the cursor to the item to set  X C[ON/OFF]
35Basic OperationRestricting Incoming CallsSetting actions when anonymous calls arriveReject incoming calls without caller ID per reason for anonymous call.1Stand-by display X M X "Settings" X "Call/VT/Dialing" X "Incoming call" X "Anonymous caller" X Enter the Terminal security code X Select/set each itemRejecting calls from callers unset in PhonebookSet to reject calls from callers not saved to Phonebook or without caller ID.1Stand-by display X M X "Settings" X "Call/VT/Dialing" X "Incoming call" X "Accept/Reject call" X Enter the Terminal security code X Move the cursor to "Reject unknown" X C[ON/OFF]Resetting to DefaultResetting various function settings to defaultsReset the settings you have changed in functions to defaults.1Stand-by display X M X "Settings" X "Other" X "Reset/Clear" X "Reset settings" X "Yes" X Enter the Terminal security codeDeleting all saved data at onceDelete saved data.1Stand-by display X M X "Settings" X "Other" X "Reset/Clear" X "Clear memory"2Mark items to delete X I[Done] X "Yes" X Enter the Terminal security code
36ConnectCall TelephoneThis FOMA terminal is not equipped with Inner camera. So the image sent to the other party during videophone call is a still image or current image captured with Outer camera.Making a Call/Videophone CallEntering a phone number to make a call1Enter a phone number•    Start with a city code even for a local call.2AA ringing tone sounds from the earpiece, and the Dialing screen is displayed until the other party answers the call.b  To make a videophone callPress I[V. phone].3To end the call, PMaking a call from Phonebook1Stand-by display X Navigation Down key2Move the cursor to the entry to call X Ab  To make a videophone callPress g[V. Phone].Making a call using redial logs or received call logsUp to 30 entries each can be saved.•    If exceeded 30 entries, the entry is deleted from the oldest.1Stand-by display X Navigation Right key (Redial) or Navigation Left key (Recv. Calls)2Move the cursor to the entry to call X C[Detail]3A or C[Call]b  To make a videophone callPress g[V. phone].
37ConnectNotifying other party of your phone numberSet whether to notify/not to notify other party of your caller ID on the network beforehand.1Stand-by display X M X "Settings" X  "NW Services" X "Caller ID notifi cation" X  "Activate/Deactivate"2"Notify"/"Not notify"•  If you hear a guidance asking to notify of your caller ID, set the caller ID notifi cation or prefi x 186 to the other party's phone number and call again.InformationMaking an international callWORLD CALL is an international call service available from DOCOMO mobile phones.When having subscribed to the FOMA service, you have also subscribed to "WORLD CALL" (except those who have applied not to use the service).•    You can make calls to approximately 240 countries and regions.•    Charges for "WORLD CALL" are added to the monthly bill for the FOMA service.•    The application/monthly fee is free of charge.•    Some billing plans are not available for this service.•    Even if the caller ID notifi cation is set, it may not be notifi ed or phone number may not be displayed correctly, depending on the telecommunication carrier. In this case, you cannot make a call from the Received calls screen.•    For details on WORLD CALL, contact "General Inquiries" at the back of this manual.•    If you use international carriers other than DOCOMO, contact them directly.1Stand-by display X Enter "010 - Country code - Area code (City code) - Other party's phone number"•  If an area code (city code) starts with "0", remove "0". (When calling some countries such as Italy, "0" may be required.)2Ab  To make an international videophone callPress I[V. phone].Receiving a Call/Videophone Call1A call arrivesb  When a videophone call arrivesPress C[Image] to answer a call with the substitute image.
38Connect2Ab  During a videophone callPress I[Camera/Image] to switch the image to send between the camera image and the substitute image.3To end the call, PAdjusting Earpiece Volume1During a call, Navigation Up/Down key When You cannot Answer a CallSetting Record messageIf the Record message is activated, the voice guidance is played when you cannot answer a voice call and the other party's message is recorded.•  The Record message does not activate when a videophone call arrives. A call arrives in a normal way.1Stand-by display X M X "Media" X "Record Message" X "Record msg. setting"2Move the cursor to "Activate record msg." X C[ON/OFF]•  Set to "ON" to select/set each item.3I[Done]When the Record message is set,   appears at the top of the screen.Playing Record message1Stand-by display X M X "Media" X "Record Message" X "Record msg. list"2Move the cursor to a recorded messageX C[Play]Setting Public mode (Drive mode)The guidance is played announcing that you cannot answer the call because you are currently driving or in a place where you should refrain from talking on the phone (train, bus, or movie theater), and then the call is disconnected.1Stand-by display X *(for over 1 second)•  When the Public mode (Drive mode) is set,   appears at the top of the screen.b  To cancel the Public mode (Drive mode)In Stand-by, press * (for over 1 second).
39ConnectSetting Public mode (Power OFF)When a call arrives while the power is turned OFF, the guidance is played announcing that you cannot answer the call because you are in a place where you should turn the power OFF (hospital, airplane, near priority seats on a train), and then the call is disconnected.1Stand-by display X Enter ":25251" X Ab  To cancel the Public mode (Power OFF)In Stand-by, enter ":25250" and press A.Using Various Network ServicesAvailable network servicesThe following DOCOMO network services are available for the FOMA terminal.Service name Subscription Monthly feeVoice Mail Service Required ChargedCall Waiting Required ChargedCall Forwarding ServiceRequired FreeNuisance Call Blocking ServiceNot required FreeCaller ID Notifi cation ServiceNot required FreeCaller ID Request ServiceNot required FreeService name Subscription Monthly feeDual Network Service Required ChargedEnglish Guidance Not required FreeMulti Number Required ChargedOFFICEED Required ChargedPublic mode (Drive mode)Not required FreePublic mode (Power OFF)Not required FreeMelody Call Required Charged•  You cannot use network services while you are out of service area or where there is no signal reception.•  For subscription or inquiries, contact "General Inquiries" at the back of this manual.•   "OFFICEED" is a fee-based service requiring a subscription. For details, visit the following DOCOMO's web site for corporations.(http://www.docomo.biz/html/service/offi ceed/) (Japanese only)•   For details on network services, see "Mobile Phone User's Guide [Network Services]".Information
40ConnectSetting Voice mail service1Stand-by display X M X "Settings" X "NW Services" X "Voice mail" X Select an itemSetting Call waiting1Stand-by display X M X "Settings" X "NW Services" X "Call waiting" X Select an itemSetting Call forwarding service1Stand-by display X M X "Settings" X "NW Services" X "Call forwarding" X Select an itemServices Available for the FOMA TerminalAvailable service Phone numberDirectory assistance service (Charges apply: guidance fee + call fee)(Only listed phone numbers can be provided.)(No prefi x) 104Telegrams (Charge applies: telegram fee)(No prefi x) 115Time check (Charges apply) (No prefi x) 117Available service Phone numberWeather forecast (Charges apply)City code of the desired area + 177Emergency calls to police (No prefi x) 110Emergency calls to fi re station and ambulance(No prefi x) 119Emergency calls for accidents at sea(No prefi x) 118Disaster emergency message dial (Charges apply)(No prefi x) 171Collect calls (Charges apply: guidance fee + call fee)(No prefi x) 106•  When you use "Call forwarding" of a land-line phone and have specifi ed a mobile phone as the forwarding destination, the caller may hear a ring tone even if the mobile phone is busy, out of service area, set to Self mode, or turned off depending on the settings of the land-line phone and mobile phone.•  Even when the UIM is not inserted, emergency phone numbers (911, 999, 112, 000, and 08) can be dialed to make an emergency call overseas. However, when Self mode is set, emergency calls cannot be made.Information
41Connect•  This FOMA terminal supports "緊急通報位置通知 (Emergency Location Report)". When making emergency calls to 110, 119, or 118, your current location (location information) will automatically be notifi ed to emergency report reception agencies such as the Police. The agency may not receive accurate location information depending on your current location or signal conditions. When you do not notify of your caller ID by dialing such as with "184" added, your location information and caller ID are not notifi ed. However, when the agency judges that the location information and caller ID are necessary to protect a human life, it may acquire your location information and caller ID regardless of your setting. The region and timing "Emergency Location Report" is introduced vary depending on the preparation of respective emergency report reception agencies.•  When making a call at 110, 119, or 118 from the FOMA terminal, inform an operator that you are calling from a mobile phone and your caller ID and actual location. Do not move around while you are talking during an emergency call to prevent the call from being disconnected unexpectedly. Do not turn the power off immediately after the call is over; and keep the FOMA terminal ready to receive calls for approximately 10 minutes.•  Depending on the area where you are calling, you may not be connected to the local police or fi re station. In such a case, use a public phone or land-line phone nearby.Using OverseasInternational roaming (WORLD WING) is a service that allows you to use the FOMA terminal used domestically in a service area of international carrier associated with DOCOMO, with the same  phone number and mail address. You can use  voice call, SMS, and i-mode mail functions without changing settings.●  Available areaThis FOMA terminal can be used in 3G network and GSM/GPRS network service areas. Check available areas.●  Before using the FOMA terminal overseas, see the following items.•    "Int'l Service Guide" pre-installed on the FOMA terminal (Japanese only)•    "Mobile Phone User's Guide [International Services]"•    DOCOMO International Services website•  For a country code, international call access code, and universal number international prefi x, see "Mobile Phone User's Guide [International Services]" or DOCOMO International Services website.Information
42ConnectAvailable servicesCommunication service3G GSM GPRSVoice call*1○○○Videophone*1○××SMS*2○○○i-mode*3○×○i-mode mail○×○i-Channel*3*4○×○Packet communication by connecting to a PC○×○*1     When you use Multi number, you cannot make a call using Additional number.*2     If you send a message to the FOMA terminal user, enter the other party's phone number in the same operation as in Japan.*3     You need to make overseas usage settings for i-mode.*4     You need to make i-Channel usage settings overseas. Packet communication charges apply for the automatic update for Basic channel information. (In Japan, it is included in i-Chanel usage fee.)•  Some services are unavailable depending on the international carrier or network you access.For countries, regions, and international carriers you can access, see "Mobile Phone User s Guide [International Services] or DOCOMO International Services website.InformationMaking a call to Japan while staying overseasMake a call with "+81" prefi xed to the other party's phone number.1Stand-by display X 0(for over 1 second) X 81 X Enter other party's phone number except the fi rst "0"2Ab  To make a videophone callPress I[V. phone].Making a call to outside the country you stay (except Japan)Make a call with "+" and a country code prefi xed to the other party's phone number.•   To make a call to a WORLD WING user overseas, enter "81" as a country code to make an international call to Japan.1Stand-by display X 0(for over 1 second) X Enter "Country code - Area code (City code) - Other party's phone number"•   If an area code (city code) starts with "0", remove "0". (When calling some countries such as Italy, "0" may be required.)
43Connect2Ab  To make a videophone callPress I[V. phone].Making a call to a person in the country you stayMake a call by dialing the other party's phone number from the area code (city code).1Stand-by display X Enter "Area code (City code) - Other party's phone number"2Ab  To make a videophone callPress I[V. phone].Making a call to WORLD WING user overseasTo make a call to a WORLD WING user overseas, make a call as an international call to Japan regardless of in or out of the country you stay.1Stand-by display X 0(for over 1 second) X 81 X Enter the other party's phone number except the fi rst "0"2Ab  To make a videophone callPress I[V. phone].Receiving a call overseas1A call arrives2AAnswer a call.3To end the call, P•  When a call arrives during the international roaming, the call is internationally forwarded from Japan. The caller is charged for call fees to Japan, and the receiver is charged for receiving the call.Information
44ConnectSending i-mode MailUpon subscription to i-mode, you can exchange e-mail via the Internet, as well as between i-mode terminals.•  For details on i-mode mail, see "Mobile Phone User's Guide [i-mode] FOMA version".1Stand-by display X g X "Compose Message"AddressSubjectAttachmentMessage2Select   fi eld X "Direct input" X Enter an address3Select   fi eld X Enter a subject4Select [Message] fi eld X Enter a message5I[Send]Attaching and sending a fi leAttach an image or melody to i-mode mail to send.•   Up to 10 fi les, a total of 2MB, can be attached.1Stand-by display X g X  "Compose Message"  2Select   fi eld X Select a fi le3Select   fi eld X "Direct input" X Enter an address4Select   fi eld X Enter a subject5Select [Message] fi eld X Enter a message6I[Send]Mail
45ConnectSending Deco-mailCreate your designed mail by adding decorations such as changing font size, font color or background color, or inserting images when editing i-mode mail.1Stand-by display X g X "Compose Message"2Enter an address and subject3Select [Message] fi eld X g[Deco]•  Set the character input mode to other than the Alphabetical input mode to select g[Deco].4Use the palette to decorate a message5If the palette is open, M[Close]b  To preview the Deco-mail messagePress M[Menu] X "Preview".6C[Set] X I[Send]Viewing Received i-mode MailWhen the FOMA terminal is in the service area, i-mode mail is automatically sent from the i-mode center.1When i-mode mail arrives,   appears at the top of the screenWhen the reception completes, the Receive results screen appears.2"Mail" X Select a folder3Select a mail to display
46ConnectReplying to i-mode mailReply to the sender of i-mode mail. Replying can be made by entering new text or quoting the text of the received i-mode mail.1Received mail detail screen X M [Menu] X "Reply/Forward" X "Reply"/"Reply with quote"2Enter a subject and message3I[Send]Checking for new i-mode mailWhen the FOMA terminal is out of service area, etc. and therefore i-mode mails are failed to be received, they are stored in the i-mode center. Check with the i-mode center for new messages to receive stored i-mode mails.1Stand-by display X g X "Check New Messages"Sorting mailsSet sorting criteria to automatically save mails to specifi ed folders.•  Create sorting folders in "Inbox" and "Outbox" beforehand.1Stand-by display X g X "Mail Setting" X "Auto sort"2"Sort inbox"/"Sort outbox" 3Select the sorting rule setting fi eld4Select the Sorting criteria fi eld X Set the sorting criteria5Select the Folder to sort into fi eld X Select the folder for sorting mails X I[Done]
47ConnectUsing SMSSending SMSSend a message addressed to a mobile phone number.1Stand-by display X g X "SMS" X "Compose SMS"2Select   fi eld X "Direct input" X Enter a phone number3Select   fi eld X Enter a message4I[Send]Viewing received SMSSMS messages are sent automatically when the FOMA terminal is in the service area.1When SMS arrives,   appears at the top of the screenWhen the reception completes, the Receive results screen appears.2C[Select] X Select a folder3Select SMS to display
48ConnectTwo types of Phonebooks are available with the FOMA terminal: FOMA terminal Phonebook to be saved on the FOMA terminal and UIM Phonebook to be saved on the UIM. Entry items that can be saved/set for each Phonebook are as follows.Item FOMA terminal Phonebook UIM PhonebookEntry detailsName (Reading)1 entry 1 entryPhone number5 entries 1 entryMail address3 entries 1 entryGroup 31 groups 11 groupsImage 1 entry Not availableOther settingsSecret code, Ringtone, Mail ringtone, etc.Not availableAdding Phonebook EntriesAdding new phone number, mail address, etc.1Stand-by display X Navigation Down key (for over 1 second)2Select "Registered memory" fi eld X "Phone"/"UIM"3Set each item4I[Done]Phonebook
49ConnectAdding Phonebook entries from redial or received calls1Stand-by display X Navigation Right key (Redial) or Navigation Left key (Recv. Calls)2Move the cursor to the phone number to add X C[Detail] X M[Menu] X "Add to phonebook"3"New registration"4Add the entry to Phonebook X I[Done]Editing Phonebook Entries1Stand-by display X Navigation Down key X Select the entry to edit X M[Menu] X "Edit" X Edit each item2After editing, I[Done] X "Yes"Deleting Phonebook Entries1Stand-by display X Navigation Down key X Select the entry to delete X M[Menu] X "Delete"2"Yes"Checking Phonebook Storage StatusCheck the Phonebook storage status of the FOMA terminal and UIM.1Stand-by display X M X "Phonebook" X "No. Of Phonebook"Viewing Call/Mail History1Stand-by display X M X "Phonebook" X "Call/Mail History" X Select the log to view

Navigation menu