LG Electronics USA L02A PCS GSM/ WCDMA USB Modem User Manual CON Guide J

LG Electronics USA PCS GSM/ WCDMA USB Modem CON Guide J

Contents

Users Manual per CRN60511

Instruction Manualfor Connection GuideData Communication Device L-02ACON_Guide_E.book  53 ページ  2008年11月26日 水曜日 午後6時43分
54DOCOMO W-CDMA・ GSM/GPRS SystemThank You for Purchasing the「Data Communica-tion Device L-02A」Before or while using the L-02A, be sure to thoroughly read this manual and the individual manual for other operation devices to ensure its correct use. For further information, contact the "docomo Information Center" on the back of this manual. The L-02A is designed to be your close partner. Treat it carefully at all times to ensure longterm performance.Before Using the FOMA Terminal•Because the FOMA terminal uses radio waves, it may not function in locations where it is difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings in areas where radio wave signals are weak or out of the service area. Even when you are on a higher floor of a tall building or condominium and nothing blocks your view outside, the FOMA terminal may not be able to receive or transmit signals. Also communication may be interrupted even when the Antenna Indication Lamp on the FOMA terminal lights green indicating a strong signal reception with 3 antenna indication bar.•Use the FOMA terminal in ways that do not disturb others in public places, crowded locations, or quiet locations.•The FOMA terminal communicates via radio waves by converting voices into digital signals. If you move into an area where signal reception is poor, the digital signals may not be accurately decoded and what you hear may differ slightly from what was actually said.•DOCOMO is not responsible for any economic losses incurred through lost communication opportunities caused by external factors such as malfunction or failure of the FOMA terminal, or electrical outage.•The FOMA terminal can be operated in FOMA Plus-Areas and FOMA HIGH-SPEED Areas.•The FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO's roaming area.•This FOMA terminal does not support i-mode functions (i-mode mail, connection to official i-mode sites or i-appli, etc.)For Those Who Use the FOMA Terminal for the First TimeIf this is the first time for you to use the FOMA terminal, it is recommended that you read this manual in the following order to learn basic operations.1. Learning the precautions. . . . . . . . . . . . . . . . . . . . . . P612. Learning the names of parts and functions of the FOMA terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P723. Inserting the FOMA terminal into a PC . . . . . . . . . . P774. Having the FOMA terminal recognized by your PC. . . P775. Setting up the FOMA terminal for communication. . . . . . . . . . . . . . . . .  "L-02A INSTRUCTION MANUAL" P60The latest version of this manual can be downloaded from the DOCOMO web site.■ The URL of PDF for Instruction Manualhttp://www.nttdocomo.co.jp/english/support/manual/index.html※ The URL and the information contained in the manual are subject to change without prior notice.CON_Guide_E.book  54 ページ  2008年11月26日 水曜日 午後6時43分
55How to Read/Refer to This ManualContentsL-02A Manual is composed of『L-02A Instruction Manual∼Connection Guide∼』(this manual) and 『L-02A INSTRUCTION MANUAL (included CD-ROM)』 recorded in CD-ROM.■『L-02A Instruction Manual∼Connection Guide∼』(this manual) The following contents such as connection to computer, troubleshooting methods, specifications of L-02A are written.•Contents/Precautions•Before Using the FOMA Terminal•Setting up•Appendix/Troubleshooting■『L-02A INSTRUCTION MANUAL (included CD-ROM)』Besides the above contents described in『L-02A Instruction Manual∼Connection Guide∼』, the contents of configuring communication through special application are also written.This manual is supplied with PDF. To view this manual, Adobe Reader (Version6.0 or later is recommended) is necessary.•L-02A Connection Software•DOCOMO Connection Manager•Configuring Network Manually•Overseas UseCON_Guide_E.book  55 ページ  2008年11月26日 水曜日 午後6時43分
56How to Refer to This ManualThis manual offers you the following methods to easily find a page describing functions or services you want to know about.・Please understand that「L-02A Manual」 refers to the「L-02A」as the「FOMA Terminal」.・This manual describes, some steps and screens may differ depending on your operating environment.・Reprinting all or parts of this manual is prohibited. ・Information contained in this manual is subject to change without prior notice.P109Search from the index when you know the names of functions or services.Front coverSearch functions or services from the index tabs printed on the front cover.P59Search from the contents that categorize functions.P60Search from the features when you want to use specific functions.From the IndexFrom the Tabs on the CoverFrom the ContentsFrom the Main FeaturesSee next page for detailed descriptionsCON_Guide_E.book  56 ページ  2008年11月26日 水曜日 午後6時43分
57A way to find a destination page is explained with an example of "Installing L-02A connection software on Windows (including a driver)"From the IndexXP109Search or a function name or a service name as shown below. From the Index Tabs on the Front CoverXFront coverSearch for the function in the order of 「Front cover」→「Chapter title page」→「Target page」as shown below.P85The page describing "Installing L-02A connection software on Windows (including a driver)"CON_Guide_E.book  57 ページ  2008年11月26日 水曜日 午後9時13分
58Displays a section title.Explains Operation steps※:The above page is an example.※:Screen images and illustrations contained in this manual are for reference only. They may differ from those seen for the actual product.Useful Information or suggestions relating to an operation.A key screen for an operation step. This is an image of a screen seen on the PC. Numbers, settings or characters entered are for reference only.Index:Searching each chapter is available.CON_Guide_E.book  58 ページ  2008年11月26日 水曜日 午後6時43分
59Contents/PrecautionsContentsHow to Read/Refer to This Manual ・・・・・・・・・・・・・・・・ 55Contents ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 59Features of the L-02A・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 60Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 61Handling and Care・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 66Purchased Product and Accessories ・・・・・・・・・・・・・・ 69Before Using the FOMA Terminal71Names of Parts and FunctionsUsing FOMA CardAvailable CommunicationsConnecting the FOMA Terminal with a PCSetting Up81Setting UpInstalling L-02A Connection Soft-ware on Windows (including a driver)Installing L-02A Connection Soft-ware on Macintosh (including a driver)Uninstalling L-02A Connection Soft-ware (including a driver)Appendix/Trouble-shooting97TroubleshootingError MessagesWarranty and After-Sales ServiceSoftware updateMain SpecificationsExport Controls of the Product and AccessoriesIntellectual Property RightsIndexCON_Guide_E.book  59 ページ  2008年11月26日 水曜日 午後6時43分
60 Contents/PrecautionsFeatures of the L-02AFOMA (Freedom Of Mobile multimedia Access) is the name of a service provided by DOCOMO based on the W-CDMA system, which is certified as one of the global standards of 3rd generation mobile communication systems (IMT-2000).■ Correspondence with the FOMA HIGH-SPEED AreaYou can enjoy high speed communication (Best effort system)at a maximum of 7.2Mbps for receiving and 384kbps for sending. •The maximum speed of 7.2Mbps for receiving and 384kbps for sending are theoretical values and they do not show the actual performance.•Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.•The actual communication speed varies depending on surrounding communication conditions and network  condition.•DOCOMO offers Internet connection services, such as「mopera U」. For details, visit the mopera U web sitehttp://www.mopera.net/ (Japanese only)※ The packet communication in FOMA HIGHSPEED area, the amount of send/receive data is expected to increase. Note that the communication fees may become high.■ International Roaming ServiceCommunications are available from a PC even in foreign countries that have adapted the W-CDMA (3G) network system or GPRS network. "L-02A INSTRUCTION MANUAL" P108 ※ If you subscribed to the FOMA service after September1,2005 a separate subscription is not required to use 「WORLD WING」. If you subscribed to the FOMA service on or before August 31, 2005 and have not subscribed to 「WORLD WING」, a separate subscription is required to use it.■ FOMA Card InterchangeabilityThe same FOMA card can be used in more than one FOMA terminal.P74 ■ SMS FeatureAllows you to send and receive SMS by using L-02A Connection Software "L-02A INSTRUCTION MANUAL" P48•Up to 20 simultaneous multi-messaging can be supported. Note that fees for multi-messaging will be charged depending on the number of SMS you send.CON_Guide_E.book  60 ページ  2008年11月26日 水曜日 午後6時43分
61Contents/PrecautionsSafety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS)•Before using your FOMA terminal, read these ″Safety Precautions″carefully so that you can use it properly. After reading the safety precautions, keep this manual in a safe place for later reference.•These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property.■ The signs below indicate the levels of danger or damage that may occur if the particular precautions are not observed .■ The following symbols indicate special warnings regarding product usage.■ "Safety Precautions" are explained in the following 4 sections.General Precautions for the FOMA Terminal and FOMA Card ……………………………………………………………… 62Precautions for the FOMA Terminal …………………… 63Precautions for the FOMA Card ………………………… 64Notes on Using near Electronic Medical Equipment …… 65This sign indicates that incorrect handling has a high possibility of causing death or serious injury. This sign indicates that incorrect handling poses a risk of causing death or serious injury.This sign indicates that incorrect handling poses a risk of causing injury or damage to the product or property. DANGERWARNINGCAUTIONDenotes things not to do (prohibition). Denotes not to disassemble.Denotes not to use where it could get wet. Denotes mandatory instructions (matters that must be complied with).Not disassemblyNot liquidsCON_Guide_E.book  61 ページ  2008年11月26日 水曜日 午後6時43分
62 Contents/PrecautionsGeneral Precautions for the FOMA Terminal and FOMA CardDANGERDo not use or leave the FOMA terminal and FOMA card in places with a high temperature such as in cars under the blazing sun.●Deformation, malfunction heating or the deterioration of performance may result. Also, part of the case could get heated, causing bare skin burns.Do not disassemble Disassemble, remodel or solder the terminal and FOMA card. ●Fire, injury, electric shock or malfunction may result.Do not let FOMA terminal and FOMA card get wet. ●Contact with water or other liquids may cause heating, electric shock, fire, malfunction or injury. Take care not to use the terminal and FOMA card in areas where they could get wet.WARNINGDo not put the FOMA terminal or FOMA card in microwave ovens or other heating. ●The FOMA terminal may over heat, smoke or catch fire, or its circuit parts may burst.Do not throw the FOMA terminal or FOMA card, or subject them to severe shocks. ●Malfunction or fire may result.Be careful not to let electro conductive materials (metal pieces, pencil leads etc.) contact with the connector terminal. Also, make sure that these are not entered into the inside of the FOMA terminal. ●Fire or other malfunctions may result from a short circuit.Make sure you have the power of  the computer which is connected with FOMA terminal switched off before you go near a flammable gas such as gasoline fumes.●Using the terminal in such an environment may result in a fire.Not disassemblyNot liquidsCON_Guide_E.book  62 ページ  2008年11月26日 水曜日 午後6時43分
63Contents/PrecautionsCAUTIONDo not place the FOMA terminal or FOMA card on unstable locations such as wobbly tables or slanted locations. ●The FOMA terminal or FOMA card may fall, resulting in injury or malfunction.Do not store the FOMA terminal or FOMA card in humid or dusty places, or in hot areas. ● Malfunction may result.If children use the FOMA terminalFOMA terminal or FOMA card, a guardian should explain the precautions and correct operations. The guardian should also make sure that the instructions are followed during use. ●Injury may result.Keep out of reach of babies and infants.●Accidental swallowing or injury may result.Precautions for the FOMA TerminalWARNINGDo not put the FOMA terminal in the place where it could be affected by an expanded airbag, e.g. on the dashboard. ●If the airbag expands, the FOMA terminal could hit you and others, causing accidents such as injury and the FOMA terminal could get malfunction or damaged.Do not place the terminal in breast or inner pocket when electronic medical equipment is near by. ●Using FOMA terminal closed to electronic medical equipment may result malfunction.Do not allow liquids such as water, or foreign materials such as metal pieces or flammable materials to get into the FOMA card opening in the FOMA terminal.●Fire, electronic shock or malfunction may result.CON_Guide_E.book  63 ページ  2008年11月26日 水曜日 午後6時43分
64 Contents/PrecautionsTurn off the FOMA terminal in places where use is prohibited such as airplanes or hospitals.●Electronic and electronic medical appliances may be adversely affected. For use inside medical facilities, make sure that you comply with their regulations.Remove FOMA terminal from the USB port in places near high-precision electronic devices or devices using weak electronic signals.●The FOMA terminal may possibly cause these devices to malfunction. ●Electronic devices that may be affected Hearing aids, implanted cardiac pacemakers, implanted defibrillators, other medical electronic devices, fire alarms, automatic doors and other automatically controlled devices.If you are using an implanted cardiac pace maker, implanted defibrillator or any other electronic medical device, consult the manufacturer or retailer of the device for advice regarding possible effects from radio waves.CAUTIONElectronic devices in some types of cars can be affected by use of the FOMA terminal. ●For safety's sake, do not use the FOMA terminal inside such cars.Itching, rash or eczema may be caused depending on your physical conditions or predisposition. ●If an abnormality occurs, stop using the FOMA terminal immediately, and then seek medical attention.Metal(chrome plating) is used to the following parts.Parts that are used: USB connectorPrecautions for the FOMA CardCAUTIONBe careful when removing the FOMA card(IC portion). ●Your hands or fingers may be injured.CON_Guide_E.book  64 ページ  2008年11月26日 水曜日 午後6時43分
65Contents/PrecautionsNotes on Using near Electronic Medical Equipment■The description below meets ″Guideline on the Use of Radio-communication Equipment such as Cellular Telephones - Safeguards for Electronic Medical Equipment″ by the Electromagnetic Compatibility Conference.WARNINGBe sure to adhere to the following regulations inside medical facilities.●Keep the FOMA terminal out of operating rooms, intensive care units (ICUs) or coronary care units (CCUs). ●Turn off the PC in hospital wards. ●Turn off the PC in hospital lobbies and corridors if electrical medical devices could be nearby.●If the medical facility has specific zones where use or possession of mobile terminals is prohibited, follow those regulations. ●If the function which automatically turns on the power is set, cancel the setting before turning off your PC.Turn off the PC in crowded trains or other public places where implanted cardiac pacemaker or defibrillator wearers could be nearby.●Signals from the FOMA terminal may affect the operation of implanted cardiac pacemakers or defibrillators.If you use an implanted cardiac pacemaker or implanted defibrillator, use the mobile terminal 22cm or more away from the implanted cardiac pacemaker or implanted defibrillator. ●Operation of an implanted cardiac pacemaker or implanted defibrillator may be affected by radio waves.Patients using electronic medical equipment other than implanted cardiac pacemakers or implanted defibrillators (using outside medical facilities for treatment at home, etc.) should check the influence of radio waves upon the equipment by consulting the manufacturer.●Operation of electronic medical equipment may be affected by radio waves.CON_Guide_E.book  65 ページ  2008年11月26日 水曜日 午後6時43分
66 Contents/PrecautionsHandling and CareGeneral Usage Guidelines■Keep the FOMA terminal away from water.The FOMA terminal and FOMA card are not waterproof. Do not use the terminal in places with high humidity such as a bath or where rain may get it wet. If you carry the card close to your body, moisture from sweat may corrode the internal parts causing a malfunction. Note that malfunctions deemed to be caused by water are not covered by the warranty, and may be impossible to repair. Since these malfunctions are not under warranty, even when repair is possible, it will be done at the user's expense.■Clean the FOMA terminal with a dry, soft cloth (Lens cleaning cloth).If the FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may disappear or color may fade.■Keep the connector contacts clean with a dry, soft cloth.Dirty contacts can result in intermittent connections.■Do not place the equipment near air conditioner outlets.Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction.■Do not place the FOMA terminal where excessive force will be applied to it.If FOMA terminal is inserted to a full bag, or placed in a pocket and sat on, its internal PCBs may be damaged or malfunction. Such damage is not covered by warranty.■Read the individual manual attached to the FOMA terminal.FOMA Terminal■Avoid using in extremely high or low temperatures.The FOMA terminal should be used within a temperature range from 5 °C to 35 °C and a humidity range from 45 % to 85 %.■FOMA terminal may affect fixed phones, televisions or radios in use nearby. Use as far as possible from such appliances.■Keep a separate record of any information stored on the FOMA terminal and store the copies in a safe location. DOCOMO assumes no responsibility for the loss of any of your data.CON_Guide_E.book  66 ページ  2008年11月26日 水曜日 午後6時43分
67Contents/Precautions■Remove the FOMA terminal from the PC when transporting. Malfunction or damage may result.■It is normal for the FOMA terminal to become warm during use. You can continue to use it even when it is warm.■Take care not to drop the FOMA terminal when removing the FOMA terminal from the carrying case.■When it is not in use, keep the FOMA terminal in its carrying case to keep the connector contacts clean.Dirty contacts may result in intermittent connections.■When putting the FOMA terminal in carrying case, keep it away from wet or high temperature place. Pay attention not to put excessive force on the FOMA terminal.Transformation, tarnish, color staining may result.FOMA Card■Do not put excessive force on the FOMA card when inserting or removing it into the FOMA terminal.■It is normal for the FOMA card to become warm during use. You can continue to use it even when it is warm.■Always keep the IC portion of the FOMA card clean.■Clean the FOMA card with a soft, dry cloth (Lens cleaning cloth).■Be sure to keep a separate note of the information registered to the FOMA terminal.DOCOMO is not responsible for any losses of registered information.■Visit DOCOMO shop to return the FOMA card for the environmental purpose.■Avoid extreme temperature.■Do not scratch, touch carelessly or short circuit the IC portion. Data loss or malfunction may result.■Do not drop or give shock to the FOMA card .Malfunction may result.■Do not bend or put heavy things on the FOMA card.Malfunction may result.CON_Guide_E.book  67 ページ  2008年11月26日 水曜日 午後6時43分
68 Contents/PrecautionsCAUTION■Do not use the modified FOMA terminal. Using modified FOMA terminal result in violating the law of Electromagnetic Compatibility.FOMA terminal has been complied with technical standard of wireless equipment stipulated by law of Electromagnetic Compatibility. As for the proof, the technical standard compliance mark, is indicated in the inscription seal. If FOMA terminal is modified by turning the screw to the left to disassemble, technical standard compliance becomes invalid.Please do not use FOMA terminal during the time when technical standard compliance is being invalid, since you are in violation of the law of Electromagnetic Compatibility.CON_Guide_E.book  68 ページ  2008年11月26日 水曜日 午後6時43分
69Contents/PrecautionsPurchased Product and Accessories■ L-02A Terminal (With Warranty) ■ L-02A Instruction Manual∼Connection Guide∼■ Carrying Case (Sample) ■ L-02A CD-ROM•L-02A Connection Software (For Windows/Macintosh)•DOCOMO Connection Manager (For Windows/Macintosh)•L-02A Communication Configuration File (Drivers)(For Windows/Macintosh)•L-02A INSTRUCTION MANUAL(PDF) ※ Software specifications are subject to change without prior notice. ■ USB Extension Cable (Sample)Use when "USB Extension Cable" is written in this manual.■ Mounting folder (Sample)Use when "A mounting Folder" is written in this manual.CON_Guide_E.book  69 ページ  2008年11月26日 水曜日 午後8時24分
CON_Guide_E.book  70 ページ  2008年11月26日 水曜日 午後6時43分
71Before Using the FOMA TerminalNames of Parts and Functions・・・・・・・・・・・・・・・・・・ 72Using a FOMA Card・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 74Available Communications ・・・・・・・・・・・・・・・・・・・・・・ 76Connecting FOMA Terminal to a PC ・・・・・・・・・・・・ 77CON_Guide_E.book  71 ページ  2008年11月26日 水曜日 午後6時43分
72 Before Using the FOMA TerminalNames of Parts and FunctionsaAntennaThe antenna is inside the FOMA terminal.bUSB Connector→P79Connection contacts to a PC.cFOMA Card Cap→P74Inserts/Removes the FOMA Card.dPWR Lamp→P73Indicates the power supply conditions.eIDLE/BUSY Lamp→P73Indicates the FOMA terminal status.L-02AabedcCON_Guide_E.book  72 ページ  2008年11月26日 水曜日 午後6時43分
73Before Using the FOMA TerminalMode Indication Lamp※ Operation indicating lampabFOMA terminal StatusaPower Indication LampbMode Indication LampWhen powered on - -Waiting to connect to the FOMA network Red GreenPacket communicationAttempting to communicate Red Blue (Flash) Communicating Red BlueSMSWhile receiving Yellow(Flash) GreenOpening SMS Red GreenSending SMS Red GreenPINPIN Lock Red -Waiting to unlock PIN1 Red -CON_Guide_E.book  73 ページ  2008年11月26日 水曜日 午後6時43分
74 Before Using the FOMA TerminalUsing a FOMA CardThe FOMA card is an IC card that stores personal information such as your phone number. Without a FOMA card installed in the FOMA terminal, you cannot use data communication, etc.. For detailed information, refer to FOMA Card Manual.Inserting/RemovingInsertingaPull out the FOMA card cartridgebPut a FOMA card into the cartridge with IC facedcInsert the cartridge back into the FOMA terminal•Insert as following.RemovingaPull out the FOMA card cartridgebTake the FOMA card out from the cartridgeIC is facedIC is facedCON_Guide_E.book  74 ページ  2008年11月26日 水曜日 午後6時43分
75Before Using the FOMA TerminalPIN1 CodeYou can set PIN codes (Personal Identification Number) for FOMA Card. The default setting for the PIN1 code is "0000". The PIN1 code is a 4 to 8-digit security code to be entered every time the FOMA terminal is turned on for user verification to prevent any unauthorized use by others.■ Changing the PIN1 CodeYou can change the PIN1 code to any number. To prevent any unauthorized use by third parties, change it to your own number. If you improperly enter the PIN1 code 3 times in a row, further entry is locked automatically (PIN lock), so be sure to keep a separate note of the numbers you set.•Entering PIN1 Code/ Changing PIN1 code→"L-02A INSTRUCTION MANUAL" P64■ PIN Unblocking CodeThe PIN Unblocking Code is the number used to unblock the PIN1 code. You are notified of your PIN Unblocking Code when you purchase your FOMA terminal. Entering the Unblocking Code (8-digit) unblocks the PIN lock.If you improperly enter the Unblocking Code 10 times in a row, the FOMA card locks automatically, so be sure to keep a separate note of the number.Note•Make sure to check the direction of FOMA card.•Be careful not to scratch FOMA card's IC parts.•Inserting FOMA card in the reverse direction may cause malfunction.•Inserting and removing FOMA card with an excessive force may cause damage to your FOMA card.•Do not remove FOMA card while FOMA terminal is inserted to a PC, it may causes damage to your FOMA card.If your FOMA card is set to require a PIN1 code, data communication cannot be performed until the PIN1 is entered. Start the L-02A High Speed Utility and verify the PIN1 code, or set ("L-02A INSTRUCTION MANUAL" P63)not to verify the PIN1 code in advance.ICStart up L-02A Connection SoftwareThe PIN1 code Verification screen appearsEnter PIN1 CodeIncorrect entry 3 times in a rowEnter Unblocking PIN CodeOK Incorrect entry 10 times in a rowYou can set a newPIN1 code Contact a DOCOMO shopCON_Guide_E.book  75 ページ  2008年11月26日 水曜日 午後6時43分
76 Before Using the FOMA TerminalFOMA Card TypesPlease be aware that the FOMA card (Blue) has different functions from the FOMA card (Green/White) as follows:WORLD WINGWORLD WING is DOCOMO's FOMA international roaming service that provides telephone and other types of mobile communications. It allows the subscriber to use the same phone number overseas as in Japan by inserting a FOMA card(green/white) into a FOMA terminal or a mobile phone designed for overseas use.•If you subscribed to the FOMA service after September 1, 2005, a separate subscription is not required. However, if you unsubscribed to the FOMA service subscription or canceled the service, a separate subscription is required.•If you initially subscribed to the FOMA service before August 31, 2005 and have not subscribed to "WORLD WING", a separate subscription is required.•This service is not available with some billing plans. •Your FOMA card (green/white) is lost or stolen overseas, contact DOCOMO immediately and temporarily suspend your subscription. For contact information, see "docomo Information Center" on the back of this manual. Call and communication charges after the terminal was lost or stolen are still charged to you.Available CommunicationsPacket CommunicationFees for this communication method are based on the amount of exchanged data. You can perform data communication at a maximum of 7.2Mbps for receiving and 384kbps for transmitting by using a connection that allows FOMA communication such as 「mopera U」, one of DOCOMO's Internet connection services.※ The maximum speed of 7.2Mbps for receiving and 384kbps for sending is theoretical values and does not show the actual ones. The actual communication speed depends on communication environment and network congestion.•You can perform communication using international roaming under「mopera U」•Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.•The communication speed varies depending on the access point and radio wave status.•The communication speed varies depending on the access point under international roaming.•Use the「DOCOMO Connection Manager」in the CD-ROM to check the approximate number of transmission bytes and charges under the communication.Function FOMA card (Blue)FOMA card (Green/White)The number of digits of a phone number that can be saved to the FOMA card PhonebookUp to 20 digits Up to 26 digitsThis terminal allows up to 20 digits.WORLD WING Not available AvailableCON_Guide_E.book  76 ページ  2008年11月26日 水曜日 午後6時43分
77Before Using the FOMA TerminalUsage Notes■ Internet service provider feesFees to an Internet service provider may be required to connect to the Internet. These fees are added to the FOMA service fees and are paid to your Internet service provider directly. For details on connection fees, contact your Internet service provider. You can subscribe to such as「mopera U」, one of DOCOMO's Internet connection services. Charge for subscribing 「mopera U」 is required.For service and connection/settings of 「mopera」, visit the「mopera」 web site.http://www.mopera.net/mopera/index.html (Japanese only)■ User authentication to access networksDepending on the access point, user authentication (ID and password) may be required to connect. If required, enter the ID and password from the dial-up network. The ID and password will be provided by the network administrator of your Internet service provider or the access point. For details, contact your provider or access point network administrator.■ Requirements for packet communicationThe following conditions must be met to perform communications using the FOMA terminal. However, a connection may not be established if traffic is heavy at the base station or if radio signals are weak.•The FOMA terminal must be in a FOMA network or DOCOMO's roaming service area.•The access point corresponds to the FOMA packet communication.Connecting FOMA Terminal to a PCWhen connecting FOMA terminal with computer for the first time, it is required to install L-02A connection software (including a driver).For installing L-02A connection software, refer to "L-02A connection software (including a driver) on Windows" (P85) or"Installing L-02A connection software (including a driver) on Macintosh".(P90)Note•Communication fees become high when performing communications with large amount of data such as browsing websites with many graphics or downloading data.•Data communication fees under international roaming differ from those in Japan.•FOMA terminal does not support 64K data communication.•This FOMA terminal does not support Remote Wakeup.•This FOMA terminal does not support FAX communication.CON_Guide_E.book  77 ページ  2008年11月26日 水曜日 午後6時43分
78 Before Using the FOMA TerminalWhen Using a Mounting Folder•Use a mounting folder and a USB extension cable to fix the FOMA terminal on the top of the PC.aTurn on a PCbConnecting the FOMA terminal using a USB extension cable and a mounting folder as shown below•When inserting the FOMA terminal into a mounting folder, make sure to insert as following. The direction in reverse makes USB extension cable not available to fix.cStart communicatingProduct label is facedNote•Confirm whether power indication lamp changes to red and mode indication lamp changes to green.•Refer to mounting folder, USB extension cable manual for details.Power Indication lampMode Indication LampCON_Guide_E.book  78 ページ  2008年11月26日 水曜日 午後6時43分
79Before Using the FOMA TerminalWhile Connecting to a PC Directly•It is possible to use FOMA terminal that insert to PC horizontally at USB port.RemovingaEnd data communication•If the L-02A connection software/DOCOMO connection manager is already running, exit the L-02A connection software/DOCOMO connection manager. Verify that data connection is disconnected.bRemove FOMA terminal•Remove FOMA terminal by holding USB connector and pulling it in horizontal. Note•Putting mistakenly excessive force or shock on FOMA terminal may result damage or malfunction.Caution•If you force to remove FOMA terminal and pull out the USB extension cable, this may result malfunction.•Removing FOMA terminal from USB connector during data communication may suspend data communication and result malfunction or data losses.CON_Guide_E.book  79 ページ  2008年11月26日 水曜日 午後6時43分
CON_Guide_E.book  80 ページ  2008年11月26日 水曜日 午後6時43分
81Setting upSetting up ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 82Installing L-02A Connection Software on Windows (including a driver) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 85Installing L-02A Connection Software on Macintosh (including a driver) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 90Uninstalling L-02A Connection Software (including a driver) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 93CON_Guide_E.book  81 ページ  2008年11月26日 水曜日 午後6時43分
82 Setting upSetting up■ Data communication with L-02AFirst, installation of L-02A connection software (including a driver) is required. When installing L-02A connection software, the communication configuration file (including a driver) for recognizing FOMA terminal in PC will also be installed.Although data communication is available with only L-02A connection software, if necessary using it after installing DOCOMO connection manager in addition is also available.Data communication is also available based on configuring manually after installing L-02A connection software.■ Installation of L-02A connection softwareBecause L-02A has zero installation, when connecting the FOMA terminal to a PC for the first time, the screen of L-02A connection software installation appears automatically. The "Zero installation" is corresponding to Windows Vista/XP/2000. If zero installation works improperly, install L-02A connection software with the included CD-ROM.In addition, although Macintosh does not support the zero installation feature, installtion continues because the CD-ROM icon is displayed when connecting the FOMA terminal to a PC.The procedure of setting up is shown on the next page.CON_Guide_E.book  82 ページ  2008年11月26日 水曜日 午後6時43分
83Setting upWork Flow of Setting upConnecting the FOMA terminal to a PC P85 Preparing the included CD-ROMP87Installing L-02A connection software (including a driver)・ For WindowsP85/・ For MacintoshP90L-02A Communication Configuration File (Drivers)P88Application option of L-02A connection software"L-02A INSTRUCTION MANUAL" P60Communication connection with L-02A connection software"L-02A INSTRUCTION MANUAL" P47Installing DOCOMO connection manager・For Windows "L-02A INSTRUCTION MANUAL" P73・For Macintosh "L-02A INSTRUCTION MANUAL" P77Application option/communication connection with DOCOMO connection manager『DOCOMO connection manager operation manual』Communication configuring manually "L-02A INSTRUCTION MANUAL" P84Communication connecting manually with OS "L-02A INSTRUCTION MANUAL" P104Using L-02A connection softwareConfiguring manually(Only Windows)Using DOCOMO connection managerCON_Guide_E.book  83 ページ  2008年11月26日 水曜日 午後6時43分
84 Setting upOperating EnvironmentsUsing this FOMA terminal under the following operational environments.※1 DOCOMO does not guarantee the operation under the supported OS of the OS is changed through update.※2 Required memory or available hard disk space may vary depending on the system environment of a PC.※3 Only Mac with CPU made by Intel Corporation is available.For latest information of operation environment, visit DOCOMO's "international web site"Item RequirementPC Main Unit•Available CD-ROM drive to use from PC-AT compatible.•USB port (Comply with Universal Serial Bus Specification Rev1.1/2.0)※ FOMA terminal does not support high-speeddata rate of USB2.0.•DOCOMO is not responsible for any incompatibility of the operation performed through the USB Hub (including USB port available from the monitor, keyboard, etc.)•Display resolution of 800×600 pixels, High Color (65.536) or higher is recommended.OS※1Windows 2000 SP4 or later (Japanese versions)Windows XP SP2 or later (Japanese versions)Windows Vista SP1 or later (Japanese versions)Mac OS X 10.4.11 (Japanese versions)※3Mac OS X 10.5.5 (Japanese versions)※3Required Memory※2Windows 2000 : 64Mbytes or moreWindows XP : 128Mbytes or moreWindows Vista : 512Mbytes or moreMac OS X 10.4.11:512Mbytes or moreMac OS X 10.5.5:512Mbytes or moreHard Disk Space※2 50Mbytes or more available spaceNote•The software may not work depending on the operating system environment. DOCOMO does not guarantee any operation other than the environment operation described on the left side.CON_Guide_E.book  84 ページ  2008年11月26日 水曜日 午後6時43分
85Setting upInstalling L-02A Connection Software on Windows (including a driver)The L-02A connection software only need to be installed when you connect the FOMA terminal to your PC for the first time.InstallingFor Windows VistaaConnect the FOMA terminal with a PCThe setup screen of L-02A connection software is automatically displayed by zero installation."自動再生" screen will be displayed depending on setting.If the screen is displayed, check "ソフトウェアとゲームに対しては常に次の動作を行う" and select "Launcher.exeの実行"np※ When the Setting up screen of L-02A connection software is not automatically displayed, install with the included CD-ROM (P87)Note•Do not remove the FOMA terminal while installing.•Installation may take several minutes depending on the PC you use. •Do not install or uninstall during data communication. •When installing, make sure to install from the account with PC supervisor privileges. An error will occur during installation if you install from the account without these privileges. •For details on setting up PC supervisor privileges, contact your computer manufacturer or Microsoft Corporation.CON_Guide_E.book  85 ページ  2008年11月26日 水曜日 午後6時43分
86 Setting upbClick "許可(Allow)" on "ユーザーアカウント制御(User account control)" screen■For Windows XP/2000•Because "ユーザーアカウント制御(User account control)" screen is not displayed, follow the next stepcClick "次へ(Next)"dClick "同意する (I Agree)"Installation starts.eClick "完了 (Finish)"Install communication configuration file (Driver) continually.CON_Guide_E.book  86 ページ  2008年11月26日 水曜日 午後6時43分
87Setting upfConfirm whether the FOMA terminal is recognized by PCOn the lower right side of task tray, "デバイスドライバソフトウェアをインストールしています(Device driver software is being installed)" message is displayed, and the FOMA terminal is recognized automatically.If the FOMA terminal is recognized properly, "デバイスを使用する準備ができました(The device is ready for use)" message is displayed.■For Windows XP•  On the lower right side of task tray, "新しいハードウェアが見つかりました。 (A new hardware has been found.)" message is displayed, and the FOMA terminal is recognized automatically.•  If the FOMA terminal is recognized properly, "新しいハードウェアがインストールされ、使用準備ができました。(A new hardware has been installed and ready for use.)" message is displayed.■For Windows 2000•  The warning screen of removing device is displayed which has nothing to do with using continually.•  "新しいハードウェアが見つかりました(A new hardware has been found.)" message is displayed, and the FOMA terminal is recognized automatically.Installing from CD-ROMFor Windows VistaaAfter starting a PC→Insert the included CD-ROM into the PCb"スタート(Start)""すべてのプログラム(All programs)""アクセサリ(Accessory)"Click "ファイル名を指定して実行(Specify a file name and run)"cEnter "<CD-ROMドライブ名>:¥Windows¥L-02A 接続ソフト¥StartCD.exe" in "名前(Name)"  Click "OK""自動再生" screen will be displayed depending on setting.If the screen is displayed, check "ソフトウェアとゲームに対しては常に次の動作を行う" and select "Launcher.exeの実行"dPerform the same operation as the one on the step 2 or later on "Installing (P86)"CON_Guide_E.book  87 ページ  2008年11月26日 水曜日 午後6時43分
88 Setting upConfirmation after InstallationaDouble click L-02A connection software iconWhen the following screen is displayed, the confirmation of installation finishes.Confirming L-02A Communication Configuration File (Drivers)Confirm whether L-02A Communication Configuration File (Drivers) is set in a PC.For Windows VistaaClick  "スタート(Start)""コントロールパネル(Control panel)""システムとメンテナンス(System and maintenance)""デバイスマネージャ(Device manager)""続行(Continue)"■For Windows XPClick "スタート(Start)""コントロールパネル(Control panel)""パフォーマンスとメンテナンス(Performance and maintenance)""システム(System)""デバイスマネージャ(Device manager)" of "ハードウェア(Hardware)" tab■For Windows 2000 Click "スタート(Start)""設定(Settings)""コントロールパネル(Control panel)""システム(System)""デバイスマネージャ(Device manager)" of "ハードウェア(Hardware)" tabCON_Guide_E.book  88 ページ  2008年11月26日 水曜日 午後6時43分
89Setting upbClick each device display to confirm the driver name installed•Confirm whether the driver name is displayed below "ポート(COM とLPT)(Port (COM and LPT))", "モデム(Modem)"•COM port number differs depending on user and PC.Device name Driver namePort(COM and LPT)FOMA L02A USB Serial1 Device FOMA L02A USB Serial2 Device Modem FOMA L02ANote•If FOMA terminal is not recognized through the PC's USB port, try other available USB port. FOMA terminal may not be recognized properly with some USB port of PC.•When communicating data with L-02A connection software, application operation of L-02A is required.→"L-02A INSTRUCTION MANUAL" P60•When communicating data with DOCOMO connection manager without L-02A connection software, installation of DOCOMO connection manager is required.→"L-02A INSTRUCTION MANUAL" P73•When communicating data with neither L-02A connection software nor DOCOMO connection manager, configure it manually.→"L-02A INSTRUCTION MANUAL" P84•If use Flat-rate data plan, install DOCOMO connection manager individually.CON_Guide_E.book  89 ページ  2008年11月26日 水曜日 午後6時43分
90 Setting upInstalling L-02A Connection Software on Macintosh (including a driver)When installing L-02A connection software, make sure to finish "ドコモ コネクションマネージャ (DOCOMO connection manager)" first. aConnect the FOMA terminal with a MacCD-ROM icon is displayed on the desktop.※ If icon is not displayed, insert the included CD-ROM into a Mac.CD-ROM icon is displayed on the desktop.bDouble click the CD-ROM icon※ If use the included CD-ROM, continuously double click "Mac" "L-02A 接続ソフト(L-02A connection software)" in order.cDouble click "L-02A 接続ソフト インストーラー.mpkg (L-02A connection software installer.mpkg)"dClick "続ける (Continue)"Note•Do not remove the FOMA terminal while installing.•When installing, make sure to install from the account with PC supervisor privileges. CON_Guide_E.book  90 ページ  2008年11月26日 水曜日 午後6時43分
91Setting upeClick "続ける (Continue)"fConfirm "使用許諾契約 (The license agreement)". If agree with the content, click "同意する (I Agree)"gClick "インストール (Install)"h Enter administrator passwordClick "OK"CON_Guide_E.book  91 ページ  2008年11月26日 水曜日 午後6時43分
92 Setting upi"インストールを続ける(Continue installing)"Click "インストール(Install)"jClick "再起動(Restart)"Restart the Mac. Installation finishes.Confirmation after InstallationaDouble click L-02A connection software iconWhen the following screen is displayed, the confirmation of installation finishes.Note•When communicating data with L-02A connection software, application operation of L-02A is required.→"L-02A INSTRUCTION MANUAL" P60•When communicating data with DOCOMO connection manager without L-02A connection software, installation of DOCOMO connection manager is required.→"L-02A INSTRUCTION MANUAL" P73•If use Flat-rate data plan, install DOCOMO connection manager individually.CON_Guide_E.book  92 ページ  2008年11月26日 水曜日 午後6時43分
93Setting upUninstalling L-02A Connection Software (including a driver)•Before uninstalling, remove the FOMA terminal from the PC.•When uninstalling, make sure to install from the account with PC supervisor privileges. For Windows Vistaa "スタート(Start)""すべてのプログラム (All programs)""L-02A接続ソフト (L-02A connection software)"Click "Uninstall"■For Windows XP•"スタート (Start)""すべてのプログラム (All programs)""L-02A 接続ソフト(L-02A connection software)"Click "Uninstall"■For Windows 2000•"スタート (Start)""プログラム (Program)""L-02A 接続ソフト(L-02A connection software)"Click "Uninstall"b"ユーザーアカウント制御 (User account control)" screenClick "許可(Allow)"If "キャンセル(Cancel)" is clicked, uninstallation will be stopped.■For Windows XP/2000•Since "ユーザーアカウント制御 (User account control)" screen is not displayed, follow the next procedure.cClick "アンインストール (Uninstall)"CON_Guide_E.book  93 ページ  2008年11月26日 水曜日 午後6時43分
94 Setting updClick "完了 (Finish)"Uninstallation finishes.For MacintoshWhen uninstall L-02A connection software, exit "DOCOMO connection manager" first.aInsert the included CD-ROM into a MacCD-ROM icon is displayed on the desktop.bDouble click the CD-ROM iconcDouble click "Mac"CON_Guide_E.book  94 ページ  2008年11月26日 水曜日 午後6時43分
95Setting updDouble click "L-02A接続ソフト (L-02A connection software)"eDouble click "アンインストーラ"fClick "アンインストール(Uninstall)"  "再起動(Restart)"Mac restarts. Uninstall finishes.CON_Guide_E.book  95 ページ  2008年11月26日 水曜日 午後6時43分
CON_Guide_E.book  96 ページ  2008年11月26日 水曜日 午後6時43分
97Appendix/TroubleshootingTroubleshooting ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 98Error Messages・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 100Warranty and After-Sales Service ・・・・・・・・・・・・・・ 102Updating software ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 103Main specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 104Export Controls of the Product and Accessories ・・ 105Intellectual Property Rights ・・・・・・・・・・・・・・・・・・・・ 107Index・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 109CON_Guide_E.book  97 ページ  2008年11月26日 水曜日 午後6時43分
98Appendix/TroubleshootingTroubleshooting■ The FOMA terminal is not recognized■ Communication problems■ Problems with AT CommandsSymptom CheckFOMA terminal is not recognized Reinsert the FOMA terminal all the way into the USB port securely.Verify the L-02A Communication Configuration Files (Drivers) for the FOMA terminal functioning properly.→P85, P90Communication may fail and the FOMA terminal cannot be properly recognized and functioned, if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal.  If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again.When connecting the FOMA terminal with a USB port, if data communication is not available without being recognzied, double click the "DOCOMO" icon recognized as a CD drive or start "L-02A connection software" or "DOCOMO connection manager" to recognize the FOMA terminal as a modem.The FOMA card will not be able to use if PIN1 unlock code is wrongly entered 10 times in a low. For further information, visit DOCOMO shop.Symptom CheckCommunications are not possibleVerify that signals are received in the service area.In the setting of Send Caller ID does not conform to the provider's instructions, communication may not be performed.→"L-02A INSTRUCTION MANUAL" P67, P84 Check if you set the FOMA Card Setting to "PIN1 unblocking".→"L-02A INSTRUCTION MANUAL" P63If set to (PIN1 Lock), launch the L-02A connection software, then change FOMA card setting to "PIN1 unblocking".→"L-02A INSTRUCTION MANUAL" P64 Check the property settings of the modem and the registration of the destination (APN)Symptom Check[ERROR] appears when a command is enteredVerify that you entered a correct ATcommand.Check the properties of the terminal software to see whether a device other than the FOMA terminal is selected[OK] does not appear after an AT command is entered. Check the L-02A Communication Configuration Files (Drivers) have been installed and functioned properly.Verify that the commands start with "AT" or "at".CON_Guide_E.book  98 ページ  2008年11月26日 水曜日 午後6時43分
99Appendix/Troubleshooting■ Other problemsSymptom CheckThe terminal stopped working suddenly Verify that the FOMA CARD is properly inserted to FOMA terminal.→P77Your PC operating environments may have changed because a new peripheral or software was installed. Make a confirmation with manufacturer or maker of accessory or software.The FOMA terminal is not detected if it is inserted into a USB port while installing the L-02A Communication Configuration Files (Drivers).Restart the PC with the FOMA terminal inserted into the USB port of a PC.Internet connection speed decreased significantlyInserting FOMA terminal directly to a PC may result in deterioration of performance depending on the type of PC, specification and degree of electromagnetic interference.Deterioration of performance may occur to the service areas where W-CDMA/HSDPA/GSM network are unstable. In this case, move to other area and try to connect again.CON_Guide_E.book  99 ページ  2008年11月26日 水曜日 午後6時43分
100Appendix/TroubleshootingError MessagesError Messages Description圏外 You are out of service area or available network.サービス地域ではありません。ネットワークを再検索しますか?You may be out of service area or available network, or network error. Please do network setting again.端末の認証に失敗しました。顧客センターまたは代理店にお問い合わせください。Communication may fail and the FOMA terminal cannot be properly recognized if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. Contact DOCOMO shop if the same problems persist.データ通信中には設定できません。終了後に設定してください。You cannot customize setting during data communication. Try again after closing data communication.変更するPIN1コードと確認用のPIN1コードが異なります。Two of new PIN1 are not identical each other. New PIN1 you want to change is not matched to the PIN1 you entered for verification purpose. Enter correct PIN1.FOMAカードが挿入されているか確認してください。Make sure to insert FOMA card into FOMA terminal before inserting to a PC.FOMAカードが取り外されました。 Do not remove FOMA card while using FOMA terminal.FOMA端末が取り付けられていません。 Verify the FOMA terminal is properly inserted into a PC. Verify that the FOMA terminal is properly recognized by the PC.PIN1を複数回間違えたため使用できなくなりました。(PIN1 blocked)PIN1コードがロックされています。An incorrect PIN1was improperly entered 3 times in a row. Available functions will be limited. Enter PIN unblocking code to unlock.PIN1コードが違います。残り(○/3)回入力可能です。再入力してください。An incorrect PIN1 code has been entered. Enter the correct PIN1 code again.PIN1コードが間違います。(PIN1コードは0123456789のみ使用できます。)You can use 0,1,2,3,4,5,6,7,8,9 as a valid PIN1 code. Others are invalid.PIN1コードは4∼8文字です。 Valid PIN1 code is from 4 to 8 digit.CON_Guide_E.book  100 ページ  2008年11月26日 水曜日 午後6時43分
101Appendix/TroubleshootingPIN1コードの変更はPINロックが設定されているときに可能です。To change the PIN1, PIN must be locked. Switch PIN unblocking to PIN blocking.PINロック解除コードが違います。残り(○/10)回入力可能です。再入力してください。An incorrect PIN was imporperly entered 10 times in a row. Available functions will be limited. Please enter the contact unblocking PIN code.SMS送信に失敗しました。 You may be out of service or available network.You may encounter problems due to the network error.PIN1ロック解除コードがブロックされているためFOMAカードを使用できません。顧客センターにお問い合わせください。You are no longer able to use FOMA card that PIN1 unblocking code has been improperly entered10 times in a row. Please contact DOCOMO shop.FOMA端末の初期化に失敗しました。FOMA端末をリセットしてください。Communication may fail and the FOMA terminal cannot be properly recognized, if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again.送受信データなし。待ち受けモードに入ります。When no data transmission has been incurred for a certain period of time. Communication will be resumed when data transmission is incurred, so stay as it is.Error Messages DescriptionCON_Guide_E.book  101 ページ  2008年11月26日 水曜日 午後6時43分
102Appendix/TroubleshootingWarranty and After-Sales ServiceWarranty•A written warranty is provided with every FOMA terminal. Make sure that you receive it. Store the warranty in a safe place after you read it and verified that it contains the ″shop name/date″ you purchased the product. If the written warranty does not contain the necessary information, contact the shop where you purchased the product. The warranty is valid for a period of one year from the date of purchase.•This product and all accessories are subject to change, in part or whole, for the sake ofimprovement without prior notice.After-Sales ServiceIf Problems Occur•Before requesting service, read the "Troubleshooting″ section in this manual. If the problem still persists, contact one of the numbers listed in ″Repairs″ on the back of this manual.If the Result of Inquiries Indicates that a Repair is Required•Take your FOMA terminal to a service center designated by DOCOMO. Be sure to check the operating hours of the service center. You must present the warranty.■ In the warranty period•The FOMA terminal will be repaired at no charge subject to the conditions of the warranty. •The warranty must be presented to receive warranty service. The subscriber will be charged for the repair of items not covered in the warranty or repairs of defects resulting from misuse, accident or neglect even during the warranty period.•The subscriber is charged even during the warranty period for the repair of failures caused by the use of devices or consumable items that are not DOCOMO specified.•You will be charged if damage is found on the connector or etc after purchasing product.■ Repairs may not be possible in the following cases•When DOCOMO Repairs judges that the FOMA terminal is exposed to water. (Ex: the sticker is reacted to water)•Repair is not possible when corrosion due exposure to moisture, condensation or perspiration is detected in a moisture seal reaction or test, or if any of the internal boards are damaged or deformed. ※ Since these conditions are outside the scope of the warranty, any repairs, if at all possible, will be charged.■ After expiration of the warrantyAll repairs that are requested are charged.CON_Guide_E.book  102 ページ  2008年11月26日 水曜日 午後6時43分
103Appendix/Troubleshooting■ Replacement partsBasically, replacement parts (parts required to maintain product function) will be kept in stock for at least 4 years after termination of production. Please note that the product may not be repaired even during this period, depending on the malfunctioning parts due to a shortage of those parts. Depending on the nature of the required repairs, it may still be possible to repair your terminal even after this period. Contact ″Repairs″ listed on the back of this manual.Pay attention•Do not modify the FOMA terminal, the FOMA card or its accessories.- Fire, injury or damage may result. - If the FOMA terminal is modified (part replacement, modification, painting, etc.), it will be repaired only after the modified parts have been restored to the condition at the time of purchase. However, repair may be refused depending on the nature of modification.・ Using sticker to decorate the FOMA terminal.・ Exchanging the packing with those other than DOCOMO    product.- Repair of failures or damage caused by modification are charged even during the warranty period.•Do not remove any inscription stickers attached to the FOMA terminal. The inscription stickers certify that the FOMA terminal satisfies specific technical standards. If stickers are removed intentionally or are reattached in such a way that confirmation of the sticker's contents is impossible, repair or servicing may be refused because confirmation of whether or not the device conforms to relevant technical standards cannot be made.Updating softwareDownload the modification file of FOMA terminal from   download site on the Internet and then update the software. If software update is necessary, you will be informed at the DOCOMO web site with "お知らせ(Information)".Note•Do not unplug the FOMA terminal with the computer during software update.•Software update (downloading and rewriting) may take a while.•If software update fails, all operations become unavailable. In this case, bring your FOMA terminal to a DOCOMO service center.CON_Guide_E.book  103 ページ  2008年11月26日 水曜日 午後6時43分
104Appendix/TroubleshootingMain specifications■ Operation systemWindows 2000 Professional Japanese version(Service Pack 4 or later)Windows XP Home Edition Japanese version(Service Pack 2 or later)Windows XP Professional Japanese version(Service Pack 2 or later)Windows Vista 32 bit Japanese version (Service Pack1 or later)Windows Vista 64 bit Japanese version (Service Pack1 or later)Mac OS X 10.4.11 Japanese versionMac OS X 10.5.5 Japanese version■ Communication SpeedPacket Communication:Maximum receiving: 7.2Mbps(Best effort)Maximum sending: 384kbps(Best effort)※ The maximum speed of 7.2Mbps for receiving and 384kbps for sending is theoretical values and does not show the actual ones.The actual communication speed depends on communication environment and network congestion. ※ Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps■ Operating environmentTemperature:5℃∼35℃Humidity:45%∼85%■ Power sourcePower voltage DC5V±5%(Supplied from PC)Max Current consumption Max Current consumption while communicating:   Approx. 600mA or below Average Current consumption while communicating:   Approx. 328mA or below Average Current consumption while Standby:   Approx. 41mA or below※ Depending on the usage, power consumption fluctuates.■ Form factorUSB connection type■ DimensionsHeight: approx. 80mmWidth: approx. 34mmDepth: approx. 11.8mm■WeightApprox. 35gCON_Guide_E.book  104 ページ  2008年11月26日 水曜日 午後6時43分
105Appendix/TroubleshootingExport Controls of the Product and AccessoriesJapan Export Control Regulations (″Foreign Exchange and Foreign Trade Law″ and relevant laws and regulations) and U.S. Reexport Regulations (Export Administration Regulations: EAR) apply to this product and its accessories. If you export or re-export this product or its accessories, please follow the necessary procedures at your own risk and expense. For details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S. Department of Commerce.European Union Directives Conformance StatementHereby, LG Electronics, Inc. declares that this product is in compliance with:•The essential requirements and other relevant provisions of Directive 1999/5/EC•All other relevant EU DirectivesThe above gives an example of a typical Product Approval Number.FCC RegulationsStatementThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help. Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. 0168CON_Guide_E.book  105 ページ  2008年11月26日 水曜日 午後6時43分
106Appendix/TroubleshootingClass B Compliance This device and its accessories comply with part15 of FCC rules.Operation is subject to the following two conditions:•This device & its accessories may not cause harmful interference.•This device & its accessories must accept any interference received, including interference that may cause undesired operation.Body-worn OperationThis device has been tested for typical body-worn operations with the distance of 0.19inches (0.5cm) from the user's body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.19inches(0.5cm) must be maintained from the user's body.Consumer Information on SAR (Specific Absorption Rate)THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications 'Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.※ Tests for SAR are conducted using standard operating positions specified by the FCC   with the device transmitting at its highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.CON_Guide_E.book  106 ページ  2008年11月26日 水曜日 午後6時43分
107Appendix/TroubleshootingBefore a device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., worn on the body) as required by the FCC for each model.The highest SAR value for this device when worn on the body is 1.17W/kg.The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Gant section of http://www.fcc.gov/ after searching on FCC ID BEJL02A. Additional information about Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.Intellectual Property RightsCopyrights and Rights of PortraitWithout permission of the copyright owner you may not duplicate, modify, transmit over public communication lines, etc. any document, image, music, software, or other content owned by a third party that you have used this product to download from an Internet web site, etc., except for private uses such as duplication and indexing that are allowed by copyright law.CON_Guide_E.book  107 ページ  2008年11月26日 水曜日 午後6時43分
108Appendix/TroubleshootingTrademarks•The「FOMA」「mopera U」「mopera」「WORLD WING」and「FOMA」logo are trademarks or registered trademarks of NTT DOCOMO, INC. •Free Dial logo mark is a registered trademark of NTT Communications Corporation.•Microsoft®, Windows® , Windows Vista® are US and other countries registered trademarks of Microsoft Corporation.•Windows Vista is the abbreviation of Microsoft® Windows Vista® Home Basic operating system、Microsoft® Windows Vista® Home Premium operating system、 Microsoft® Windows Vista® Business operating system、Microsoft® Windows Vista® Enterprise operating system、Microsoft® Windows Vista® Ultimate operating system.•Windows XP is the abbreviation of Microsoft® Windows® XP Professional operating system or Microsoft® Windows® XP Home Edition operating system. •Windows 2000 is the abbreviation of Microsoft® Windows® 2000 Professional operating system. •OS may be written abbreviated such as Windows Vista, XP, 2000.•Apple、Apple logo、Mac、Mac OS、Macintosh are registered trademark of Apple Inc. of US and other countries.•Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.•Other company names or product names mentioned in this work are the trademarks or registered trademarks of their respective owners.CON_Guide_E.book  108 ページ  2008年11月26日 水曜日 午後8時25分
109Appendix/TroubleshootingIndexAAvailable Communications................. 76CCommunication Speed ..................... 104Configuring NetworkPacket Communication ................... 76Connecting FOMA terminal to a PC .................................................. 77EError Messages................................... 100FFOMA CardInserting/Removing .......................... 74Form factor ........................................... 104IInstallL-02A Connection Software on Macintosh (including a driver)... 90L-02A Connection Software on Windows (including a driver)...... 85MMain specifications ........................... 104Mode Indication Lamp .........................73NNames of Parts and Functions ........ 72OOperating Environment .................... 104Operation system............................... 104PPower source....................................... 104Purchased Product and Accessories ........................................69RRemoving FOMA terminal................... 79SSetting up ................................................82TTroubleshooting..................................... 98UUninstallL-02A Connection Software (including a driver)......................... 93CON_Guide_E.book  109 ページ  2008年11月26日 水曜日 午後6時43分
110MEMOCON_Guide_E.book  110 ページ  2008年11月26日 水曜日 午後6時43分
111MEMOCON_Guide_E.book  111 ページ  2008年11月26日 水曜日 午後6時43分
112MEMOCON_Guide_E.book  112 ページ  2008年11月26日 水曜日 午後6時43分
マナーもいっしょに携帯しましょうFOMA端末を使用する場合は、周囲の方の迷惑にならないように注意しましょう。◎こんな場合は必ずFOMA端末を接続しているパソコンなどの電源を切ってください。■ 使用禁止の場所にいる場合FOMA端末を使用してはいけない場所があります。以下の場所では、必ずFOMA端末を接続しているパソコンなどの電源を切ってください。•航空機内    •  病院内※ 医用電気機器を使用している方がいるのは病棟内だけではありません。ロビーや待合室などでも、FOMA端末を接続しているパソコンなどの電源を切ってください。■ 運転中の場合運転中のFOMA端末のご使用は、安全走行の妨げとなり危険です。■ 満員電車の中など、植込み型心臓ぺースメーカおよび植込み型除細動器を装着した方が近くにいる可能性がある場合植込み型心臓ぺースメーカおよび植込み型除細動器に悪影響を与える恐れがあります。■ 劇場・映画館・美術館など公共の場所にいる場合静かにすべき公共の場所でFOMA端末を使用すると、周囲の方への迷惑になります。Don't forget your FOMA terminal… or your manners!When using the FOMA terminal, be considerate and do not disturb people around you.◎the following cases, be certain to turn off your PC in which the FOMA terminal is inserted.■ Where use is prohibitedThere are some places which FOMA terminal can not be used. Be sure to turn off your PC in which the FOMA terminal is inserted.•In airplane    •In hospital※ Persons with electronic medical equipment are in places other than the actual wards. Make sure you have the power switched off even if you are in a lobby or waiting room.■ While drivingUsing the FOMA terminal interferes with safe driving and may be dangerous.■ When in crowded places such as packed trains, where you could be near a person with an implanted cardiac pacemaker or implanted defibrillatorThe implanted cardiac pacemaker or implanted defibrillator operation can be adversely affected.■ When in theaters, movie theaters, museums, and similar venuesIf you use your FOMA terminal where you are supposed to be quiet, you may disturb those around you.ご契約内容の確認・変更、各種サービスのお申し込み、各種資料請求をオンライン上で承っております。パソコンから My docomo(http://www.mydocomo.com/)⇒ 各種お申込・お手続き※ パソコンからご利用になる場合、「docomo ID/パスワード」が必要となります。※ 「docomo ID/パスワード」をお持ちでない方・お忘れの方は、取扱説明書裏面の総合お問い合わせ先にご相談ください。※ ご契約内容によってはご利用いただけない場合があります。※ システムメンテナンスなどにより、ご利用になれない場合があります。You can register a confirmation/change of contracts, or request information material at the DOCOMO online.From a PC My docomo(http://www.mydocomo.com/)⇒ 各種お申込・お手続き (Subscriptions/Procedures)※ "docomo ID/Password" is required if you access the site from a PC.※ If you do not have or remember the "docomo ID/Password", contact the "docomo Information Center" listed on the back of this manual.※ Some contracts may not be available for using.※ You may not be able to use online service due to system maintenance, etc.CON_Guide_E.book  113 ページ  2008年11月26日 水曜日 午後6時43分

Navigation menu