LG Electronics USA L30LP 30-inch LCD TV/ Monitor User Manual EMISSION TEST REPORT

LG Electronics USA 30-inch LCD TV/ Monitor EMISSION TEST REPORT

Contents

Users Manual 2

K22Input Selection and TrackingAdjusting the audio functionAdjusting the audio automatically.Move to SSM Select using SSM USERUP / DOWN SELECTAUDIOAVL OFFMUTE OFFSRS WOW OFFBALANCEBASSTREBLE05050The audio will be automatically calibrated according to the type of the playback video.• User: Select this option to use the user-defined audio settings.• Flat: The most commanding and natural audio.• Movie: Select this option to watch a movie.• Music: Select this option to listen to music.• Sport: Select this option to watch sports broadcasting.Adjusting the volume automaticallyMove toAVL Select Onusing SSM USERUP / DOWN SELECTAUDIOAVL OFFMUTE OFFSRS WOW OFFBALANCEBASSTREBLE05050Use this function to automatically adjust volume that is uneven for each channel or signalso that the most appropriate level can be selected.Muting the sound temporarilyMove toMuteSelect On or Off using On : Off : SSM USERUP / DOWN SELECTAUDIOAVL OFFMUTE OFFSRS WOW OFFBALANCEBASSTREBLE05050When connected to your computer and the SSM setting in the audio menu is one of Flat, Movie,Music or Sport, the available menus are VAL, Mute, SRS WOW and Balance.Selecting and Adjusting the ScreenUse to moveUse to moveUse to moveNote
K23Adjusting the audio functionSelecting rich surround soundMove to SRSWOW Select On or Offusing SSM USERUP / DOWN SELECTAUDIOAVL OFFMUTE OFFSRS WOW OFFBALANCEBASSTREBLE05050Set the SRS WOW menu on to give a surround sound effect in mono/stereo sound or2-channel speakers.Adjusting sound balanceMove toBalance Adjust soundbalance using SSM USERUP / DOWN SELECTAUDIOAVL OFFMUTE OFFSRS WOW OFFBALANCEBASSTREBLE05050Use this function to balance sound from the left and right speakers.Adjusting audio bassMove to Bass Select bassusing SSM USERUP / DOWN SELECTAUDIOAVL OFFMUTE OFFSRS WOW OFFBALANCEBASSTREBLE05050Adjusting audio trebleMove to Treble Select trebleusing SSM USERUP / DOWN SELECTAUDIOAVL OFFMUTE OFFSRS WOW OFFBALANCEBASSTREBLE05050Use to moveUse to moveUse to moveUse to move
K24Input Selection and TrackingSelecting the optionsDisplaying the menu with a different languageMove toLanguageSelect a languageusing LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOFFOSD POSITION1280x1024@60HzTRABSOAREBCTZOOMRESET20Selecting screen sizeMove to ImageSizeSelect screen sizeusing (Full or 1:1)LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOFFOSD POSITION1280x1024@60HzTRABSOAREBCTZOOMRESET20Moving the menu screenSelectMove toOSD Position Select using LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOFFOSD POSITION1280x1024@60HzTRABSOAREBCTZOOMRESET20UP / DOWN SELECT EXITSETUP5050Change the position of the OSD screen on the monitor. LeftRightUpDown Moving the OSD screen position horizontally Moving the OSD screen position verticallySelecting and Adjusting the ScreenUse to moveUse to moveUse to move
K25Selecting the optionsAdjusting transparency of the menu screenMove toTransparency Adjust transparencyusing LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOFFOSD POSITION1280x1024@60HzTRABSOAREBCTZOOMRESET20Initializing to the factory defaultMove to Reset Select using - On: Return to the factory default.LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOFFOSD POSITION1280x1024@60HzTRABSOAREBCTZOOMRESET20Zooming the screenMove to Zoom Select LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOFFOSD POSITION1280x1024@60HzTRABSOAREBCTZOOMRESET20UP / DOWN SELECT EXITSETUPZOOM 505050H POSITIONV POSITIONUse this function to zoom in the screen. When you turn the monitor off and on again,the default screen size will be restored.Use this function to reset the monitor to the factory default. However, languageselection will not be initialized.Select Zoom, H Positionor V Position.Adjust the valueusing Use to moveUse to moveUse to moveWhen connected to your computer, the Zoom menu will be disabled if the screen size is 1:1 orPIP/POP/PBP is in use.Note
K26Input Selection and TrackingAdjusting PIP/POP/PBP Mode (Multiple Screen) FunctionsPIP/POP/PBP Mode FunctionsShowing/Hiding PIP ScreenSelecting the input signal for the PIP screen.Move to PIPModeSelect Move to PIPOn/OffSelect On or OffMove to PIP Input SelectSelecting the PIP screen sizeMove to PIPSize Select Largeor Small.UP / DOWN SELECTPIP/POP/PBPPBP MODEPOP MODEPIP MODEUP / DOWN SELECT EXITPIP/POP/PBPPIP ON/OFF OFFPIP SOURCE DVIPIP SIZE LARGEPIP IMAGEPIP SOUNDPIP SWAPOFFOFF* If you select PIP On, you can adjust the following menus.Select Selecting and Adjusting the ScreenUse to move
K27PIP (Picture In Picture) Mode FunctionsAdjusting PIP Screen ImageMove to PIPScreenSelect Select and adjustAdjusting PIP screen soundMove to PIPsoundSelect On or OffSwapping the main screen and the sub-screenMove to PIPSwapSelect On or OffUP / DOWN SELECT EXITPIP/POP/PBPPIP ON/OFF OFFPIP SOURCE DVIPIP SIZE LARGEPIP IMAGEPIP SOUNDPIP SWAPOFFOFFUP / DOWN SELECT EXITPIP/POP/PBPPIP SOURCEPIP CONTRASTPIP BRIGHTNESSPIP SHARPNESSPIP TINTPIP COLOR630505092PIP Position Adjust the PIP screen position.PIP Contrast Adjust PIP screen contrast.PIP Brightness Adjust PIP screen brightness.PIP Sharpness Adjust PIP screen sharpness.PIP Color Adjust the PIP screen color.PIP Tint Adjust the PIP screen tint.* The sub-menu can differ according to the type of the inputsignal.
K28Input Selection and TrackingPOP (Picture Out Picture) Mode FunctionsShowing/Hiding POP ScreenSelecting the input signal for the POP screen.UP / DOWN SELECTPIP/POP/PBPPIP MODEPBP MODEPOP MODEUP / DOWN SELECT EXITPIP/POP/PBPPOP ON/OFF OFFPOP SOURCE TVPOP IMAGEPOP SOUNDPOP SWAPOFFOFFSelectAdjusting PIP/POP/PBP Mode (Multiple Screen) FunctionsSelecting and Adjusting the ScreenMove to POPModeSelectMove to POPOn/OffSelect On or OffMove to POPInputSelect* If you select POP On, you can adjust the following menus.Use to move
K29POP (Picture Out Picture) Mode FunctionsAdjusting POP Screen ImageAdjusting POP screen soundSwapping the main screen and the sub-screenUP / DOWN SELECT EXITPIP/POP/PBPPOP ON/OFF OFFPOP SOURCE TVPOP IMAGEPOP SOUNDPOP SWAPOFFOFFThe POP screen menu will be disabled if the POP screen input is a PC signal (DVI).Move to POPScreenSelect Select and adjustMove to POPsoundSelect On or Off'POP 'Select On or OffUP / DOWN SELECT EXITPIP/POP/PBPPOP CONTRASTPOP BRIGHTNESSPOP SHARPNESSPOP TINTPOP COLOR630505092POP Contrast Adjust POP screen contrast.POP Brightness Adjust POP screen brightness.POP Sharpness Adjust POP screen sharpness.POP Color Adjust the POP screen color.POP Tint Adjust the POP screen tint.* The sub-menu can differ according to the type of the input signal.Note
K30Input Selection and TrackingAdjusting PIP/POP/PBP Mode (Multiple Screen) FunctionsPBP (Picture By Picture) Mode FunctionsShowing/Hiding PBP ScreenSelecting the input signal for the PBP screenMove to PBPInputSelecting the PBP screen sizeMove to PBPSize Select Full or 4:3UP / DOWN SELECTPIP/POP/PBPPIP MODEPOP MODEPBP MODEUP / DOWN SELECT EXITPIP/POP/PBPTVPBP ON/OFF OFFPBP SOURCEPBP SIZE FULLPBP IMAGEPBP SOUNDPBP SWAPOFFOFFSelectSelecting and Adjusting the ScreenMove to PBPModeSelectMove to PBPOn/OffSelect On or OffSelect* If you select PBP On, you can adjust the following menus.Use to move
K31PBP (Picture By Picture) Mode FunctionsAdjusting PBP Screen ImageMove to PBPScreenSelect Select and adjustAdjusting PBP screen soundMove to PBPsoundSelect On or OffSwapping the main screen and the sub-screenMove to PBPSwapSelect On or OffUP / DOWN SELECT EXITPIP/POP/PBPTVPBP ON/OFF OFFPBP SOURCEPBP SIZE FULLPBP IMAGEPBP SOUNDPBP SWAPOFFOFFUP / DOWN SELECT EXITPIP/POP/PBP630505092PBP CONTRASTPBP BRIGHTNESSPBP SHARPNESSPBP TINTPBP COLORPBP Contrast Adjust PBP screen contrast.PBP Brightness Adjust PBP screen brightness.PBP Sharpness Adjust PBP screen sharpness.PBP Color Adjust the PBP screen color.PBP Tint Adjust the PBP screen tint.* The sub-menu can differ according to the type of the input signal.The PBP screen menu will be disabled if the PBP screen input is a PC signal.Note
K32Input Selection and TrackingOSD Menu – When Watching Video/DVD/HDTV/TVSetting up the channel - Available only when watching TV.AUTO CHANNELCHANNELADD/DEL CHOFF123ADDFINE TUNEUP / DOWN SELECTCHANNEL SETUP50Setting up the channel manuallyMove to ChannelAUTO CHANNELCHANNELADD/DEL CHOFF123ADDFINE TUNEUP / DOWN SELECTCHANNEL SETUP50Adding/Deleting a channel you have selectedMove to Add/DelChannelAUTO CHANNELCHANNELADD/DEL CHOFF123ADDFINE TUNEUP / DOWN SELECTCHANNEL SETUP50Fine tuning the screen resolutionMove to Fine TuneAUTO CHANNELCHANNELADD/DEL CHOFF123ADDFINE TUNEUP / DOWN SELECTCHANNEL SETUP50Selecting and Adjusting the ScreenSetting up the channels automaticallySelect On using to startautomatic channel setup.Select a channelSelect Add or Del using Adjust the screen using until you can see a sharp screen.Use to moveUse to moveUse to moveUse to moveMove to AutoChannel
K33Adjusting Screen ImageAdjusting the screen automaticallyMove to PSM Select using PSM USERUP / DOWN SELECTCONTRASTBRIGHTNESSSHARPNESSCOLORTINT5050505050VIDEOUse this function to automatically set the optimal screen • User: Select this option to use the user-defined settings.• Game: Select this option when you play a game.• Standard: The most general and natural screen display status.• Dynamic: Select this option to display with a sharp image.• Mild: Select this option to display with a mild image.Adjusting screen contrastDimmerMove to Contrast.PSM USERUP / DOWN SELECTCONTRASTBRIGHTNESSSHARPNESSCOLORTINT5050505050VIDEOAdjusting screen brightnessBrighterDarker Move toBrightnessPSM USERUP / DOWN SELECTCONTRASTBRIGHTNESSSHARPNESSCOLORTINT5050505050VIDEOAdjusting screen sharpnessAdjust the outlineusing Move toSharpnessPSM USERUP / DOWN SELECTCONTRASTBRIGHTNESSSHARPNESSCOLORTINT5050505050VIDEOIf the PSM setting in the Video menu is set to Standard, Dynamic, Mild or Game, thesubsequent menus will be automatically set.Use to moveUse to moveUse to moveUse to moveNote
K34Input Selection and TrackingAdjusting screen colorAdjust screen colorusing Move to ColorPSM USERUP / DOWN SELECTCONTRASTBRIGHTNESSSHARPNESSCOLORTINT5050505050VIDEOAdjusting screen tintAdjust screen tintusing Move to TintPSM USERUP / DOWN SELECTCONTRASTBRIGHTNESSSHARPNESSCOLORTINT5050505050VIDEOAdjusting the screen imageSelecting and Adjusting the ScreenUse to moveUse to move
K35Adjusting the audio functionSelecting the audio.Move to SSM Select using SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50The audio will be automatically calibrated according to the type of the playback video.• User: Select this option to use the user-defined audio settings.• Flat: The most commanding and natural audio.• Movie: Select this option to watch a movie.• Music: Select this option to listen to music.• Sport: Select this option to watch sports broadcasting.Adjusting the volume automaticallyMove toAVLSelect Onusing SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50Use this function to automatically adjust volume that is uneven on each channel or signalso that the most appropriate level can be selected.Selecting rich surround sound Move to SRSWOW Select On/Offusing SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50Set the SRS WOW menu to On.Enjoy surround sound effects from mono/stereo sound or the two-channel speaker.Selecting the sound modeMove to Sound Select Mono/Stereo/Language using SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50The Language menu will be disabled when the input signal is video or DVD.This menu will be enabled only when the bilingual signal is entered.Use to moveUse to moveUse to moveUse to move
K36Input Selection and TrackingAdjusting sound balanceMove toBalance Adjust soundbalance using SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50Use this function to balance sound from the left and right speakers.Adjusting audio bassMove to Bass Select bassusing SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50Adjusting audio trebleMove to Treble Select trebleusing SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50Adjusting the audio functionMuting the sound temporarilyMove toMute Select On or Off using On: Off:SSM USERUP / DOWN SELECTAUDIOAVL OFFSRS WOW OFFSOUND MONOOFFMUTEBALANCEBASS5050TREBLE50If the SSM setting in the audio menu is one of Flat, Movie, Music or Sport, the available menusare VAL, Mute, SRS WOW and Balance. Other menu items will be automatically adjusted.Selecting and Adjusting the ScreenUse to moveUse to moveUse to moveUse to moveNote
K37Selecting the optionsDisplaying the menu with a different languageMove toLanguageSelect a languageusing LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOSD POSITIONTRABSOAREBCTZOOMOFFRESET20Selecting screen sizeMove to ImageSizeSelect screen sizeusing (Full, 4:3,Spectacle or 1:1)LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOSD POSITIONTRABSOAREBCTZOOMOFFRESET20Use to moveUse to move
K38Input Selection and TrackingSelecting the optionsAdjusting transparency of the menu screenMove toTransparencyAdjust transparencyusing LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOSD POSITIONTRABSOAREBCTZOOMOFFRESET20Moving the menu screenSelect using Move to OSDPositionSelect using LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOSD POSITIONTRABSOAREBCTZOOMOFFRESET20UP / DOWN SELECT EXITSETUP5050Use this function to move the OSD screen position in the monitor.LeftRightUpDownMoving the OSD screen position horizontally Moving the OSD screen position verticallySelecting and Adjusting the ScreenUse to moveUse to move
K39Zooming in on the screenSelect Move to Zoom Select LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOSD POSITIONTRABSOAREBCTZOOMOFFRESET20UP / DOWN SELECT EXITSETUPZOOM 505050H POSITIONV POSITIONUse this function to zoom in on the screen. When you turn the monitor off and onagain, the default screen size will be restored.Initializing to the factory defaultMove to Reset Select using - On: Return to the factory default.LANGUAGE ENGLISHUP / DOWN SELECTSETUPIMAGE SIZE FULLOSD POSITIONTRABSOAREBCTZOOMOFFRESET20Use this function to reset the monitor to the factory default. However, languageselection will not be initialized.Select Zoom, HPosition or V Position.Adjust the valueusing Selecting the optionsUse to moveUse to move
K40Input Selection and TrackingAdjusting PIP/POP/PBP Mode (Multiple Screen) FunctionsPIP/POP/PBP Mode FunctionsShowing/Hiding PIP ScreenSelecting the input signal for the PIP screen.Move to PIPModeSelect Move to PIPOn/OffSelect On or OffMove to PIP Input SelectSelecting the PIP screen sizeMove to PIPSize Select Largeor Small.UP / DOWN SELECTPIP/POP/PBPPBP MODEPOP MODEPIP MODEUP / DOWN SELECT EXITPIP/POP/PBPPIP ON/OFF OFFPIP SOURCE DVIPIP SIZE LARGEPIP IMAGEPIP SOUNDPIP SWAPOFFOFF* If you select PIP On, you can adjust the following menus.Select Selecting and Adjusting the ScreenUse to move
K41PIP (Picture In Picture) Mode FunctionsAdjusting PIP Screen ImageMove to PIPScreenSelect Select and adjustAdjusting PIP screen soundMove to PIPsoundSelect On or OffSwapping the main screen and the sub-screenMove to PIPSwapSelect On or OffUP / DOWN SELECT EXITPIP/POP/PBPPIP ON/OFF OFFPIP SOURCE DVIPIP SIZE LARGEPIP IMAGEPIP SOUNDPIP SWAPOFFOFFUP / DOWN SELECT EXITPIP/POP/PBPPIP ON/OFF OFFPIP SOURCE DVIPIP SIZE LARGEPIP IMAGEPIP SOUNDPIP SWAPOFFOFFPIP Position Adjust the PIP screen position.PIP Contrast Adjust PIP screen contrast.PIP Brightness Adjust PIP screen brightness.* The sub-menu can differ according to the type of the input signal.
K42Input Selection and TrackingPOP (Picture Out Picture) Mode FunctionsShowing/Hiding POP ScreenSelecting the input signal for the POP screen.Move to POPModeMove to POPOn/OffSelect On or OffMove to POPInputSelect UP / DOWN SELECTPIP/POP/PBPPIP MODEPBP MODEPOP MODEUP / DOWN SELECT EXITPIP/POP/PBPPOP ON/OFF OFFPOP SOURCE TVPOP IMAGEPOP SOUNDPOP SWAPOFFOFF* If you select POP On, you can adjust the following menus.Select Adjusting PIP/POP/PBP Mode (Multiple Screen) FunctionsSelecting and Adjusting the ScreenSelect Use to move
K43POP (Picture Out Picture) Mode FunctionsAdjusting POP Screen ImageAdjusting POP screen soundSwapping the main screen and the sub-screenUP / DOWN SELECT EXITPIP/POP/PBPPOP ON/OFF OFFPOP SOURCE TVPOP IMAGEPOP SOUNDPOP SWAPOFFOFFThe POP screen menu will be disabled if the POP screen input is video.Move to POPScreenSelect Select and adjustMove to POPsoundSelect On or OffMove to POPSwapSelect On or OffUP / DOWN SELECT EXITPIP/POP/PBPPOP ON/OFF OFFPOP SOURCE TVPOP IMAGEPOP SOUNDPOP SWAPOFFOFFPOP Contrast Adjust POP screen contrast.POP Brightness Adjust POP screen brightness.* The sub-menu can differ according to the type of input signal.Note
K44Input Selection and TrackingAdjusting PIP/POP/PBP Mode (Multiple Screen) FunctionsPBP (Picture By Picture) Mode FunctionsShowing/Hiding PBP ScreenSelecting the input signal for the PBP screen.Move to PBPModeSelect Move to PBPOn/OffSelect On or OffMove to PBPInputSelect Selecting the PBP screen sizeMove to PBPSize Select Full or 1:1PIP MODEPOP MODEPBP MODETVPBP ON/OFF OFFPBP SOURCEPBP SIZE FULLPBP IMAGEPBP SOUNDPBP SWAPOFFOFF* If you select PBP On, you can adjust the following menus.Select Selecting and Adjusting the ScreenUse to move
K45PBP (Picture By Picture) Mode FunctionsAdjusting PBP Screen ImageMove to PBPScreenSelect Select and adjustAdjusting PBP screen soundMove to PBPsoundSelect On or OffSwapping the main screen and the sub-screenMove to PBPSwapSelect On or OffTVPBP ON/OFF OFFPBP SOURCEPBP SIZE FULLPBP IMAGEPBP SOUNDPBP SWAPOFFOFF6392PBP CONTRASTPBP BRIGHTNESSPBP Contrast Adjust PBP screen contrast.PBP Brightness Adjust PBP screen brightness.* The sub-menu can differ according to the type of input signal.The PBP screen menu will be disabled if the PBP screen input is video of HDTV.Note
K46MiscellaneousVertical frequency: To enable the user to watch the monitor display, screen image should be changed tens oftimes every second like a fluorescent lamp. The vertical frequency or refresh rate is thetimes of image display per second. The unit is Hz.Horizontal frequency: The horizontal interval is the time to display one vertical line. When the horizontalinterval is divided by 1, the number of horizontal lines displayed every second can betabulated as the horizontal frequency. The unit is kHz.• See if the power cord is properly connected to theoutlet.• See if the power switch is turned on.• Adjust brightness ( ) and contrast ( ) again.• If the monitor is in power saving mode, move themouse or press any key.• The signal from the PC (video card) is out of thevertical or horizontal frequency range of themonitor. Adjust the frequency range by referringto the Specifications in this manual.* Maximum resolutionD-Sub : 1280x1024 @60HzDVI-D : 1280x1024 @60Hz• See if the set top box HDTV resolution is set to480i. If it is, change to 720p/1080i or plug the jackinto the DVD input terminal.• The signal cable between PC and monitor is notconnected. Check the signal cable.• Press the “Input Select” menu in the remotecontroller to check the input signal.Is the monitor power cordconnected?Does the power LED is turned on?Power is on, power LED is green butthe screen appears extremely dark.Does the power LED look yellow?Does the “Out of Range” messageappear?The input signal of the main screenis set to HDTV but the “Out ofRange” message appears.'Does the “Check Signal Cable”message appear?TroubleshootingNo image is displayedNote
K47• Install the monitor driver, which is provided withthe monitor, or download it from the web site.(http://www.lge.co.kr) • See if the plug&play function is supported byreferring to the video card user manual.Did you install the driver?• D-Sub analog signal – Press the “Auto Channel”button in the remote controller to automaticallyselect the optimal screen status that fits into thecurrent mode. If adjustment is not satisfactory, usethe Position OSD menu.• See if the video card resolution and frequency aresupported by the monitor. If the frequency is out ofrange, set to the recommended resolution in theControl Panel – Display – Setting menu.• D-Sub analog signal – Press the “Auto Channel”button in the remote controller to automaticallyselect an optimal screen status that fits into thecurrent mode. If adjustment is not satisfactory, usethe Clock OSD menu.• D-Sub analog signal – Press the “Auto Channel”button in the remote controller to automaticallyselect an optimal screen status that fits into thecurrent mode. If adjustment is not satisfactory, usethe Phase OSD menu.• See if the Zoom value is set to 0. If it is, youcannot adjust the H/V Position value.• If the screen size is not full when connected to thePC, execute the POP to change to full screenmode.• See if the TV sound is set to mono. If it is, thesound will not be displayed.• You cannot adjust brightness and tint in thePIP/POP/PBP Screen menu for the sub-screenamong PIP/POP/PBP menus. Therefore,brightness can be different for the sub-screen.Is the screen position wrong?Do thin lines appear on thebackground screen?Horizontal noise appears or thecharacters look blurred.Unable to adjust thehorizontal/vertical position in theZoom menu.Screen size is automatically adjustedwhen connected to the PC.No sound appears in the TV channeldisplay window.Brightness differs in the main andsub screen when connected to thePC.The screen image looks abnormal.“Unknown Monitor” message appears when the monitor is connected.
K48Input Selection and Tracking• See if the audio cable is connected properly.• Adjust the volume.• See if the sound is set properly.• See if the Sound is set to On in the PIP/POP/PBPmenu.• Select the appropriate treble sound.• Select the appropriate bass sound.• Adjust the volume.No sound?No sound is available when thePIP/POP/PBP mode is engaged.Sound is too dull.Sound is too low.TroubleshootingThe audio function does not work.• See if you have selected the proper channelmode.• Use the automatic channel setup function.• See if the TV antenna is properly connected.The TV signal is not being received.The TV function does not work.• See if the POP function is in use. If the POPfunction is in use, the screen size function may notwork.The screen size function in the OSDmenu does not work.The screen size function in the OSD menu does not work.
K49• Set the number of colors to more than 24 bits (truecolor)Select Control Panel – Display – Settings – ColorTable menu in Windows.• Check the connection status of the signal cable.Or, re-insert the PC video card.• Several pixels (red, green, white or black color)may appear on the screen, which can beattributable to the unique characteristics of theLCD panel. It is not a malfunction of the LCD.Screen has poor color resolution (16colors).Screen color is unstable or mono-colored.Do black spots appear on thescreen?Screen color is abnormal.• If you use a fixed image for a long time, the pixelsmay be damaged quickly. Use the screensaverfunction.After-image appears when themonitor is turned off.After-image appears on the monitor.• The control locking function prevents unintentionalOSD setting change due to careless usage. Tounlock the controls, simultaneously press theMenu button and > button for 5 seconds. (Youcannot set this function using the remote controllerbuttons. You can set this function in the monitoronly.)The “Controls locked” messageappears when pressing the Menubutton.“Controls Locked” message appears.
K50MiscellaneousScreen Type 30 Type (75.0062cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) PanelVisible diagonal size: 75.0062cmPixel Pitch 0.5025mmMax. Resolution D-SUB : 1280x1024 @60Hz DVI-D : 1280x1024 @60HzRecommended ResolutionD-SUB : WXGA 1280x768 @60HzDVI-D : SXGA 1280x768 @60HzHorizontal Frequency D-SUB : 31~66 kHzDVI-D : 31~66 kHzVertical Frequency 56 - 85 HzSynchronization Type Separate/Composite/SOG (Sync On Green)/Digital15-pin D-Sub type, DVI-D (digital), S-Video, composite video, HDTV, DVD, TVRated Voltage AC 100-240V~ 50/60Hz 1.8APower Consumption Normal operation: 165W Power saving preparation state: ≤5WPower saving state: ≤5W Power switch on: ≤5W Power cut-off, switch off: ≤1WSize (WxLxH) 733.8mm x 538.0 mm x 107.0mm Weight (excl. package) 16.4 kgOperational Condition Temperature: 10˚C ~ 35˚C , Humidity: 10% ~ 80% Storage Condition Temperature: -20˚C ~ 60˚C , Humidity: 5% ~ 95% The product specifications can change without prior notice for product improvement.LCD PanelVideo SignalInput ConnectorPowerDimension/WeightEnvironmental ConditionsSpecifications
K51Preset modeHorizontalFrequency(kHz)VerticalFrequency(kHz)PC Mode – Preset ModeHDV ModeComposite Video Input YPbPrPreset modeHorizontalFrequency(kHz)VerticalFrequency(kHz)1234567640 x 350720 x 400640 x 480640 x 480640 x 480800 x 600800 x 60031.46931.46831.46937.50043.26937.87946.87570706075856075VGAVGAVGAVESAVESAVESAVESA8910111213800 x 600832 x 6241024 x 7681024 x 7681280 x 10241280 x 76853.67449.72548.36360.12363.98147.7VESAMACVESAVESAVESAVESA857560756060Preset modeHorizontalFrequency(kHz)VerticalFrequency(kHz)12345720 x 4831280x 7201280x 7201920x 10801920x 108031.5045.0044.9633.7533.7259.9460.0059.9460.0059.94Power LEDMode MonitorNormal OperationPre-power Saving StatePower Saving StatePower Switch OffPower Cut-off Switch OffGreenYellowYellow--Locking DeviceUse this locking cable (optional) toprevent theft.
K52MiscellaneousDVI-D18917 2416T.M.D.S. (Transition Minimized Differential Signaling) C1~C5: DVI-I only No. Signal123456789101112131415161718192021222324T. M. D. S. Data 2- T. M. D. S. Data 2+ T. M. D. S. Data 2/4 Shield T. M. D. S. Data 4- T. M. D. S. Data 4+ DDC Clock DDC Data Analog Vertical Synchronization T. M. D. S. Data 1- T. M. D. S. Data 1+ T. M. D. S. Data 1/3 Shield T. M. D. S. Data 3- T. M. D. S. Data 3+ +5V PowerGrounding (return for +5V, horizontal sync and vertical sync)Hot Plug Detect T. M. D. S. Data 0- T. M. D. S. Data 0+ T. M. D. S. Data 0/5 Shield T. M. D. S. Data 5- T. M. D. S. Data 5+ T. M. D. S. Clock Shield T. M. D. S. Clock+ T. M. D. S. ClockProduct Specifications
K7SpeakerRefer to the manual in thespeaker box for more detailson speaker accessories.User’s Manual Power CordRCA Cable S-Video Cable Audio Cable (PC)MonitorPlease check the accessories in the product package.* The monitor and the accessories can be different from the figures shown here.15-pin D-Sub SignalCableDVI-D Signal CableAccessories

Navigation menu