LG Electronics USA L30LP 30-inch LCD TV/ Monitor User Manual EMISSION TEST REPORT
LG Electronics USA 30-inch LCD TV/ Monitor EMISSION TEST REPORT
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2
Selecting and Adjusting the Screen Adjusting the audio function Adjusting the audio automatically. The audio will be automatically calibrated according to the type of the playback video. AUDIO SSM USER AVL OFF MUTE SRS WOW OFF OFF BALANCE BASS 50 TREBLE 50 UP / DOWN • User: Select this option to use the user-defined audio settings. • Flat: The most commanding and natural audio. • Movie: Select this option to watch a movie. • Music: Select this option to listen to music. • Sport: Select this option to watch sports broadcasting. SELECT Use to move Move to SSM Select using AUDIO SSM Use this function to automatically adjust volume that is uneven for each channel or signal so that the most appropriate level can be selected. USER AVL OFF MUTE SRS WOW OFF OFF BALANCE BASS 50 TREBLE 50 UP / DOWN SELECT Use Move to AVL to move Select On using Muting the sound temporarily AUDIO SSM USER AVL OFF MUTE SRS WOW OFF OFF BALANCE BASS 50 TREBLE 50 UP / DOWN Use Move to Mute to move Select On or Off using On : SELECT Note Off : When connected to your computer and the SSM setting in the audio menu is one of Flat, Movie, Music or Sport, the available menus are VAL, Mute, SRS WOW and Balance. K22 Input Selection and Tracking Adjusting the volume automatically Adjusting the audio function Selecting rich surround sound AUDIO SSM USER AVL OFF MUTE SRS WOW OFF OFF Set the SRS WOW menu on to give a surround sound effect in mono/stereo sound or 2-channel speakers. BALANCE BASS 50 TREBLE 50 UP / DOWN SELECT Use Move to SRS WOW to move Select On or Off using Adjusting sound balance AUDIO SSM USER AVL OFF MUTE SRS WOW OFF OFF Use this function to balance sound from the left and right speakers. BALANCE BASS 50 TREBLE 50 UP / DOWN SELECT Use Move to Balance to move Adjust sound balance using Adjusting audio bass AUDIO SSM USER AVL OFF MUTE SRS WOW OFF OFF BALANCE BASS 50 TREBLE 50 UP / DOWN Use SELECT Move to Bass Select bass using Move to Treble Select treble using to move Adjusting audio treble AUDIO SSM USER AVL OFF MUTE SRS WOW OFF OFF BALANCE BASS 50 TREBLE 50 UP / DOWN SELECT Use to move K23 Selecting and Adjusting the Screen Selecting the options Displaying the menu with a different language SETUP LANGUAGE ENGLISH IMAGE SIZE FULL OSD POSITION TRABSOAREBCT 20 ZOOM RESET OFF 1280x1024@60Hz UP / DOWN Use SELECT to move Move to Language Select a language using Move to Image Size Select screen size using (Full or 1:1) Selecting screen size SETUP LANGUAGE ENGLISH IMAGE SIZE FULL TRABSOAREBCT 20 ZOOM RESET OFF 1280x1024@60Hz UP / DOWN Use SELECT Moving the menu screen SETUP LANGUAGE ENGLISH IMAGE SIZE FULL to move Change the position of the OSD screen on the monitor. OSD POSITION TRABSOAREBCT 20 ZOOM RESET OFF 1280x1024@60Hz UP / DOWN SELECT Use Move to OSD Position to move Select SETUP Moving the OSD screen position horizontally Select using Moving the OSD screen position vertically 50 50 UP / DOWN SELECT EXIT Left Right Up Down K24 Input Selection and Tracking OSD POSITION Selecting the options Adjusting transparency of the menu screen SETUP LANGUAGE ENGLISH IMAGE SIZE FULL OSD POSITION TRABSOAREBCT 20 ZOOM RESET OFF 1280x1024@60Hz UP / DOWN Use SELECT Move to Transparency to move Adjust transparency using Zooming the screen SETUP LANGUAGE ENGLISH IMAGE SIZE FULL OSD POSITION TRABSOAREBCT 20 Use this function to zoom in the screen. When you turn the monitor off and on again, the default screen size will be restored. ZOOM RESET OFF 1280x1024@60Hz UP / DOWN SELECT Use Move to Zoom to move Select SETUP ZOOM 50 H POSITION 50 V POSITION 50 Select Zoom, H Position Adjust the value using or V Position. UP / DOWN SELECT EXIT Initializing to the factory default SETUP LANGUAGE ENGLISH IMAGE SIZE FULL Use this function to reset the monitor to the factory default. However, language selection will not be initialized. OSD POSITION TRABSOAREBCT 20 ZOOM RESET OFF 1280x1024@60Hz UP / DOWN SELECT Use Move to Reset to move Note Select using - On: Return to the factory default. When connected to your computer, the Zoom menu will be disabled if the screen size is 1:1 or PIP/POP/PBP is in use. K25 Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions PIP/POP/PBP Mode Functions Showing/Hiding PIP Screen PIP/POP/PBP PIP MODE POP MODE PBP MODE Move to PIP Mode to move SELECT Select Input Selection and Tracking Use UP / DOWN Select PIP/POP/PBP PIP ON/OFF OFF PIP SOURCE DVI PIP SIZE LARGE PIP IMAGE PIP SOUND OFF PIP SWAP OFF UP / DOWN SELECT Move to PIP On/Off Select On or Off EXIT * If you select PIP On, you can adjust the following menus. Selecting the input signal for the PIP screen. Move to PIP Input Select Move to PIP Size Select Large or Small. Selecting the PIP screen size K26 PIP (Picture In Picture) Mode Functions PIP/POP/PBP PIP ON/OFF OFF PIP SOURCE DVI PIP SIZE LARGE PIP IMAGE PIP SOUND OFF PIP SWAP OFF UP / DOWN SELECT EXIT Adjusting PIP Screen Image Move to PIP Screen Select and adjust Select PIP/POP/PBP PIP SOURCE PIP CONTRAST 92 PIP BRIGHTNESS 63 PIP SHARPNESS PIP TINT PIP COLOR 50 UP / DOWN 50 SELECT EXIT PIP Position Adjust the PIP screen position. PIP Contrast Adjust PIP screen contrast. PIP Brightness PIP Sharpness PIP Color PIP Tint Adjust PIP screen brightness. Adjust PIP screen sharpness. Adjust the PIP screen color. Adjust the PIP screen tint. * The sub-menu can differ according to the type of the input signal. Adjusting PIP screen sound Move to PIP sound Select On or Off Swapping the main screen and the sub-screen Move to PIP Swap K27 Select On or Off Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions POP (Picture Out Picture) Mode Functions Showing/Hiding POP Screen PIP/POP/PBP PIP MODE POP MODE PBP MODE Move to POP Mode to move SELECT Select Select PIP/POP/PBP POP ON/OFF OFF POP SOURCE TV POP IMAGE POP SOUND OFF POP SWAP OFF UP / DOWN SELECT Move to POP On/Off Select On or Off EXIT * If you select POP On, you can adjust the following menus. Selecting the input signal for the POP screen. Move to POP Input K28 Select Input Selection and Tracking Use UP / DOWN POP (Picture Out Picture) Mode Functions PIP/POP/PBP POP ON/OFF OFF POP SOURCE TV POP IMAGE POP SOUND OFF POP SWAP OFF UP / DOWN SELECT EXIT Adjusting POP Screen Image Move to POP Screen Select and adjust Select PIP/POP/PBP POP CONTRAST 92 POP BRIGHTNESS 63 POP SHARPNESS POP TINT 50 POP COLOR 50 UP / DOWN SELECT EXIT POP Contrast Adjust POP screen contrast. POP Brightness POP Sharpness POP Color POP Tint Adjust POP screen brightness. Adjust POP screen sharpness. Adjust the POP screen color. Adjust the POP screen tint. * The sub-menu can differ according to the type of the input signal. Adjusting POP screen sound Move to POP sound Select On or Off Swapping the main screen and the sub-screen 'POP Note Select On or Off The POP screen menu will be disabled if the POP screen input is a PC signal (DVI). K29 Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions PBP (Picture By Picture) Mode Functions Showing/Hiding PBP Screen PIP/POP/PBP PIP MODE POP MODE PBP MODE Move to PBP Mode to move SELECT Select Input Selection and Tracking Use UP / DOWN Select PIP/POP/PBP PBP ON/OFF OFF PBP SOURCE TV PBP SIZE FULL PBP IMAGE PBP SOUND OFF PBP SWAP OFF UP / DOWN SELECT Move to PBP On/Off Select On or Off EXIT * If you select PBP On, you can adjust the following menus. Selecting the input signal for the PBP screen Move to PBP Input Select Move to PBP Size Select Full or 4:3 Selecting the PBP screen size K30 PBP (Picture By Picture) Mode Functions PIP/POP/PBP PBP ON/OFF OFF PBP SOURCE TV PBP SIZE FULL PBP IMAGE PBP SOUND OFF PBP SWAP OFF UP / DOWN SELECT EXIT Adjusting PBP Screen Image Move to PBP Screen Select Select and adjust PIP/POP/PBP PBP CONTRAST 92 PBP BRIGHTNESS 63 PBP SHARPNESS PBP TINT 50 PBP COLOR 50 UP / DOWN SELECT EXIT PBP Contrast PBP Brightness PBP Sharpness PBP Color Adjust PBP screen contrast. Adjust PBP screen brightness. Adjust PBP screen sharpness. Adjust the PBP screen color. PBP Tint Adjust the PBP screen tint. * The sub-menu can differ according to the type of the input signal. Adjusting PBP screen sound Move to PBP sound Select On or Off Swapping the main screen and the sub-screen Move to PBP Swap Note Select On or Off The PBP screen menu will be disabled if the PBP screen input is a PC signal. K31 Selecting and Adjusting the Screen OSD Menu – When Watching Video/DVD/HDTV/TV Setting up the channel - Available only when watching TV. Setting up the channels automatically CHANNEL SETUP AUTO CHANNEL OFF CHANNEL 123 ADD/DEL CH ADD FINE TUNE UP / DOWN 50 Use SELECT 123 ADD/DEL CH ADD FINE TUNE UP / DOWN 50 Use SELECT AUTO CHANNEL OFF CHANNEL 123 ADD/DEL CH ADD FINE TUNE Select a channel 50 Use SELECT AUTO CHANNEL OFF CHANNEL 123 ADD/DEL CH ADD FINE TUNE Move to Add/Del Channel to move Select Add or Del using Fine tuning the screen resolution CHANNEL SETUP UP / DOWN Move to Channel to move Adding/Deleting a channel you have selected CHANNEL SETUP UP / DOWN Select On using to start automatic channel setup. 50 SELECT Use Move to Fine Tune to move Adjust the screen using until you can see a sharp screen. K32 Input Selection and Tracking OFF CHANNEL Move to Auto Channel Setting up the channel manually CHANNEL SETUP AUTO CHANNEL to move Adjusting Screen Image Adjusting the screen automatically VIDEO PSM CONTRAST USER 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 50 TINT 50 UP / DOWN Use this function to automatically set the optimal screen • User: Select this option to use the user-defined settings. • Game: Select this option when you play a game. • Standard: The most general and natural screen display status. • Dynamic: Select this option to display with a sharp image. • Mild: Select this option to display with a mild image. SELECT Use Select using USER 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 50 TINT 50 UP / DOWN Use SELECT PSM CONTRAST Move to Contrast. to move Dimmer Adjusting screen brightness VIDEO USER 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 50 TINT 50 UP / DOWN Use SELECT PSM CONTRAST Move to Brightness to move Brighter Darker Adjusting screen sharpness VIDEO USER 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 50 TINT 50 UP / DOWN Move to PSM Adjusting screen contrast VIDEO PSM CONTRAST to move SELECT Note Use Move to Sharpness to move Adjust the outline using If the PSM setting in the Video menu is set to Standard, Dynamic, Mild or Game, the subsequent menus will be automatically set. K33 Selecting and Adjusting the Screen Adjusting the screen image Adjusting screen color VIDEO PSM CONTRAST USER 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 50 TINT 50 UP / DOWN Use SELECT Adjust screen color using USER 50 50 SHARPNESS 50 COLOR 50 TINT 50 SELECT Use to move Move to Tint K34 Adjust screen tint using Input Selection and Tracking BRIGHTNESS UP / DOWN Move to Color Adjusting screen tint VIDEO PSM CONTRAST to move Adjusting the audio function Selecting the audio. AUDIO SSM AVL The audio will be automatically calibrated according to the type of the playback video. USER OFF SRS WOW OFF SOUND MONO MUTE OFF BALANCE 50 BASS 50 TREBLE 50 UP / DOWN SELECT • User: Select this option to use the user-defined audio settings. • Flat: The most commanding and natural audio. • Movie: Select this option to watch a movie. • Music: Select this option to listen to music. • Sport: Select this option to watch sports broadcasting. Use Move to SSM to move Select using Adjusting the volume automatically AUDIO SSM USER AVL OFF SRS WOW OFF SOUND MONO MUTE OFF Use this function to automatically adjust volume that is uneven on each channel or signal so that the most appropriate level can be selected. BALANCE 50 BASS 50 TREBLE 50 UP / DOWN SELECT Use Move to AVL to move Select On using Selecting rich surround sound AUDIO SSM USER AVL OFF SRS WOW OFF SOUND MONO MUTE OFF Set the SRS WOW menu to On. Enjoy surround sound effects from mono/stereo sound or the two-channel speaker. BALANCE 50 BASS 50 TREBLE UP / DOWN 50 SELECT Use Move to SRS WOW to move Select On/Off using Selecting the sound mode AUDIO SSM USER AVL OFF SRS WOW OFF SOUND MONO MUTE OFF The Language menu will be disabled when the input signal is video or DVD. This menu will be enabled only when the bilingual signal is entered. BALANCE 50 BASS 50 TREBLE UP / DOWN 50 SELECT Move to Sound Use to move K35 Select Mono/Stereo/ Language using Selecting and Adjusting the Screen Adjusting the audio function Muting the sound temporarily AUDIO SSM USER AVL OFF SRS WOW OFF SOUND MONO MUTE OFF BALANCE 50 BASS 50 TREBLE 50 UP / DOWN Use SELECT Move to Mute to move Select On or Off using On: Off: Adjusting sound balance AUDIO Use this function to balance sound from the left and right speakers. USER AVL OFF SRS WOW OFF SOUND MONO MUTE OFF BALANCE 50 BASS 50 TREBLE 50 UP / DOWN Use Move to Bass Select bass using Move to Treble Select treble using USER AVL OFF SRS WOW OFF SOUND MONO MUTE OFF BALANCE 50 BASS 50 TREBLE 50 UP / DOWN SELECT Use to move Adjusting audio treble AUDIO SSM Adjust sound balance using to move Adjusting audio bass AUDIO SSM Move to Balance SELECT USER AVL OFF SRS WOW OFF SOUND MONO MUTE OFF BALANCE 50 BASS 50 TREBLE 50 UP / DOWN Note SELECT Use to move If the SSM setting in the audio menu is one of Flat, Movie, Music or Sport, the available menus are VAL, Mute, SRS WOW and Balance. Other menu items will be automatically adjusted. K36 Input Selection and Tracking SSM Selecting the options Displaying the menu with a different language SETUP LANGUAGE ENGLISH IMAGE SIZE FULL OSD POSITION TRABSOAREBCT 20 ZOOM RESET OFF UP / DOWN Use SELECT Move to Language to move Select a language using Selecting screen size SETUP LANGUAGE ENGLISH IMAGE SIZE FULL OSD POSITION TRABSOAREBCT 20 ZOOM RESET UP / DOWN OFF SELECT Use Move to Image Size to move K37 Select screen size (Full, 4:3, using Spectacle or 1:1) Selecting and Adjusting the Screen Selecting the options Moving the menu screen SETUP LANGUAGE ENGLISH IMAGE SIZE FULL Use this function to move the OSD screen position in the monitor. OSD POSITION TRABSOAREBCT 20 ZOOM RESET OFF UP / DOWN Use SELECT Move to OSD Position to move Select using Select using SETUP Moving the OSD screen position horizontally Moving the OSD screen position vertically 50 UP / DOWN SELECT EXIT Left Right Up Down Adjusting transparency of the menu screen SETUP LANGUAGE ENGLISH IMAGE SIZE FULL OSD POSITION TRABSOAREBCT 20 ZOOM RESET UP / DOWN OFF SELECT Use Move to Transparency to move K38 Adjust transparency using Input Selection and Tracking 50 Selecting the options Zooming in on the screen SETUP LANGUAGE ENGLISH IMAGE SIZE FULL Use this function to zoom in on the screen. When you turn the monitor off and on again, the default screen size will be restored. OSD POSITION TRABSOAREBCT 20 ZOOM RESET OFF UP / DOWN Use SELECT to move Move to Zoom Select Select SETUP ZOOM 50 H POSITION 50 V POSITION 50 Adjust the value Select Zoom, H Position or V Position. using UP / DOWN SELECT EXIT Initializing to the factory default SETUP LANGUAGE ENGLISH IMAGE SIZE FULL Use this function to reset the monitor to the factory default. However, language selection will not be initialized. OSD POSITION TRABSOAREBCT 20 ZOOM RESET UP / DOWN OFF SELECT Use Move to Reset to move K39 Select using - On: Return to the factory default. Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions PIP/POP/PBP Mode Functions Showing/Hiding PIP Screen PIP/POP/PBP PIP MODE POP MODE PBP MODE Use SELECT Move to PIP Mode to move Select Input Selection and Tracking UP / DOWN Select PIP/POP/PBP PIP ON/OFF OFF PIP SOURCE DVI PIP SIZE LARGE PIP IMAGE PIP SOUND OFF PIP SWAP OFF UP / DOWN SELECT Move to PIP On/Off Select On or Off EXIT * If you select PIP On, you can adjust the following menus. Selecting the input signal for the PIP screen. Move to PIP Input Select Move to PIP Size Select Large or Small. Selecting the PIP screen size K40 PIP (Picture In Picture) Mode Functions PIP/POP/PBP PIP ON/OFF OFF PIP SOURCE DVI PIP SIZE LARGE PIP IMAGE PIP SOUND OFF PIP SWAP OFF UP / DOWN SELECT EXIT Adjusting PIP Screen Image Move to PIP Screen Select and adjust Select PIP/POP/PBP PIP ON/OFF OFF PIP SOURCE DVI PIP SIZE LARGE PIP IMAGE PIP SOUND OFF PIP SWAP OFF UP / DOWN PIP Position PIP Contrast SELECT EXIT Adjust the PIP screen position. Adjust PIP screen contrast. PIP Brightness Adjust PIP screen brightness. * The sub-menu can differ according to the type of the input signal. Adjusting PIP screen sound Move to PIP sound Select On or Off Move to PIP Swap Select On or Off Swapping the main screen and the sub-screen K41 Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions POP (Picture Out Picture) Mode Functions Showing/Hiding POP Screen PIP/POP/PBP PIP MODE POP MODE PBP MODE Move to POP Mode to move SELECT Select Select PIP/POP/PBP POP ON/OFF OFF POP SOURCE TV POP IMAGE POP SOUND OFF POP SWAP OFF UP / DOWN SELECT Move to POP On/Off Select On or Off EXIT * If you select POP On, you can adjust the following menus. Selecting the input signal for the POP screen. Move to POP Input K42 Select Input Selection and Tracking Use UP / DOWN POP (Picture Out Picture) Mode Functions PIP/POP/PBP POP ON/OFF OFF POP SOURCE TV POP IMAGE POP SOUND OFF POP SWAP OFF UP / DOWN SELECT EXIT Adjusting POP Screen Image Move to POP Screen Select and adjust Select PIP/POP/PBP POP ON/OFF OFF POP SOURCE TV POP IMAGE POP SOUND OFF POP SWAP OFF UP / DOWN POP Contrast SELECT EXIT Adjust POP screen contrast. POP Brightness Adjust POP screen brightness. * The sub-menu can differ according to the type of input signal. Adjusting POP screen sound Move to POP sound Select On or Off Swapping the main screen and the sub-screen Move to POP Swap Note Select On or Off The POP screen menu will be disabled if the POP screen input is video. K43 Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions PBP (Picture By Picture) Mode Functions Showing/Hiding PBP Screen PIP MODE POP MODE PBP MODE Use Select Input Selection and Tracking Move to PBP Mode to move Select PBP ON/OFF OFF PBP SOURCE TV PBP SIZE FULL PBP IMAGE PBP SOUND OFF PBP SWAP OFF Move to PBP On/Off Select On or Off * If you select PBP On, you can adjust the following menus. Selecting the input signal for the PBP screen. Move to PBP Input Select Move to PBP Size Select Full or 1:1 Selecting the PBP screen size K44 PBP (Picture By Picture) Mode Functions PBP ON/OFF OFF PBP SOURCE TV PBP SIZE FULL PBP IMAGE PBP SOUND OFF PBP SWAP OFF Adjusting PBP Screen Image Move to PBP Screen Select Select and adjust PBP CONTRAST 92 PBP BRIGHTNESS 63 PBP Contrast Adjust PBP screen contrast. PBP Brightness Adjust PBP screen brightness. * The sub-menu can differ according to the type of input signal. Adjusting PBP screen sound Move to PBP sound Select On or Off Swapping the main screen and the sub-screen Move to PBP Swap Note Select On or Off The PBP screen menu will be disabled if the PBP screen input is video of HDTV. K45 Troubleshooting No image is displayed Is the monitor power cord connected? • See if the power cord is properly connected to the outlet. Does the power LED is turned on? • See if the power switch is turned on. Power is on, power LED is green but the screen appears extremely dark. • Adjust brightness ( Does the power LED look yellow? • If the monitor is in power saving mode, move the mouse or press any key. Does the “Out of Range” message appear? • The signal from the PC (video card) is out of the vertical or horizontal frequency range of the monitor. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution D-Sub : 1280x1024 @60Hz DVI-D : 1280x1024 @60Hz The input signal of the main screen is set to HDTV but the “Out of Range” message appears. • See if the set top box HDTV resolution is set to 480i. If it is, change to 720p/1080i or plug the jack into the DVD input terminal. 'Does the “Check Signal Cable” message appear? • The signal cable between PC and monitor is not connected. Check the signal cable. • Press the “Input Select” menu in the remote controller to check the input signal. ) and contrast ( ) again. Miscellaneous Note Vertical frequency: To enable the user to watch the monitor display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. Horizontal frequency: The horizontal interval is the time to display one vertical line. When the horizontal interval is divided by 1, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. K46 The screen image looks abnormal. Is the screen position wrong? • D-Sub analog signal – Press the “Auto Channel” button in the remote controller to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. Do thin lines appear on the background screen? • See if the video card resolution and frequency are supported by the monitor. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu. Horizontal noise appears or the characters look blurred. • D-Sub analog signal – Press the “Auto Channel” button in the remote controller to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. Unable to adjust the horizontal/vertical position in the Zoom menu. • D-Sub analog signal – Press the “Auto Channel” button in the remote controller to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. Screen size is automatically adjusted when connected to the PC. • See if the Zoom value is set to 0. If it is, you cannot adjust the H/V Position value. No sound appears in the TV channel display window. • If the screen size is not full when connected to the PC, execute the POP to change to full screen mode. Brightness differs in the main and sub screen when connected to the PC. • See if the TV sound is set to mono. If it is, the sound will not be displayed. • You cannot adjust brightness and tint in the PIP/POP/PBP Screen menu for the sub-screen among PIP/POP/PBP menus. Therefore, brightness can be different for the sub-screen. “Unknown Monitor” message appears when the monitor is connected. Did you install the driver? • Install the monitor driver, which is provided with the monitor, or download it from the web site. (http://www.lge.co.kr) • See if the plug&play function is supported by referring to the video card user manual. K47 Troubleshooting The audio function does not work. No sound? • See if the audio cable is connected properly. • Adjust the volume. • See if the sound is set properly. No sound is available when the PIP/POP/PBP mode is engaged. • See if the Sound is set to On in the PIP/POP/PBP menu. Sound is too dull. • Select the appropriate treble sound. • Select the appropriate bass sound. Sound is too low. • Adjust the volume. The TV signal is not being received. • See if you have selected the proper channel mode. • Use the automatic channel setup function. • See if the TV antenna is properly connected. The screen size function in the OSD menu does not work. The screen size function in the OSD menu does not work. • See if the POP function is in use. If the POP function is in use, the screen size function may not work. K48 Input Selection and Tracking The TV function does not work. Screen color is abnormal. Screen has poor color resolution (16 colors). • Set the number of colors to more than 24 bits (true color) Select Control Panel – Display – Settings – Color Table menu in Windows. Screen color is unstable or monocolored. • Check the connection status of the signal cable. Or, re-insert the PC video card. Do black spots appear on the screen? • Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. After-image appears on the monitor. After-image appears when the monitor is turned off. • If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screensaver function. “Controls Locked” message appears. The “Controls locked” message appears when pressing the Menu button. • The control locking function prevents unintentional OSD setting change due to careless usage. To unlock the controls, simultaneously press the Menu button and > button for 5 seconds. (You cannot set this function using the remote controller buttons. You can set this function in the monitor only.) K49 Specifications The product specifications can change without prior notice for product improvement. LCD Panel Screen Type 30 Type (75.0062cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 75.0062cm 0.5025mm Pixel Pitch Video Signal Max. Resolution D-SUB : 1280x1024 @60Hz DVI-D : 1280x1024 @60Hz Recommended Resolution D-SUB : WXGA 1280x768 @60Hz DVI-D : SXGA 1280x768 @60Hz Horizontal Frequency D-SUB : 31~66 kHz DVI-D : 31~66 kHz Vertical Frequency 56 - 85 Hz Synchronization Type Separate/Composite/SOG (Sync On Green)/Digital 15-pin D-Sub type, DVI-D (digital), S-Video, composite video, HDTV, DVD, TV Input Connector Power Rated Voltage Power Consumption AC 100-240V~ 50/60Hz 1.8A Normal operation: 165W Power saving preparation state: ≤5W Power saving state: ≤ 5W Power switch on: ≤ 5W Power cut-off, switch off: ≤ 1W Dimension/Weight Size (WxLxH) 733.8mm x 538.0 mm x 107.0mm Weight (excl. package) 16.4 kg Storage Condition Temperature: -20˚C ~ 60˚C , Humidity: 5% ~ 95% K50 Miscellaneous Environmental Conditions Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 10% ~ 80% PC Mode – Preset Mode Preset mode VGA VGA VGA VESA VESA VESA VESA 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 Horizontal Frequency (kHz) Vertical Frequency (kHz) 31.469 31.468 31.469 37.500 43.269 37.879 46.875 70 70 60 75 85 60 75 Preset mode 10 11 12 13 HDV Mode Composite Video Input YPbPr Preset mode 720 x 483 1280x 720 1280x 720 1920x 1080 1920x 1080 Horizontal Frequency (kHz) 31.50 45.00 44.96 33.75 33.72 53.674 49.725 48.363 60.123 63.981 47.7 Power LED Vertical Frequency (kHz) 59.94 60.00 59.94 60.00 59.94 VESA 800 x 600 MAC 832 x 624 VESA 1024 x 768 VESA 1024 x 768 VESA 1280 x 1024 VESA 1280 x 768 Horizontal Vertical Frequency Frequency (kHz) (kHz) Mode Normal Operation Pre-power Saving State Power Saving State Power Switch Off Power Cut-off Switch Off Locking Device Use this locking cable (optional) to prevent theft. K51 Monitor Green Yellow Yellow 85 75 60 75 60 60 Product Specifications DVI-D 16 24 17 No. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Signal T. M. D. S. Data 2T. M. D. S. Data 2+ T. M. D. S. Data 2/4 Shield T. M. D. S. Data 4T. M. D. S. Data 4+ DDC Clock DDC Data Analog Vertical Synchronization T. M. D. S. Data 1T. M. D. S. Data 1+ T. M. D. S. Data 1/3 Shield T. M. D. S. Data 3T. M. D. S. Data 3+ +5V Power Grounding (return for +5V, horizontal sync and vertical sync) Hot Plug Detect T. M. D. S. Data 0T. M. D. S. Data 0+ T. M. D. S. Data 0/5 Shield T. M. D. S. Data 5T. M. D. S. Data 5+ T. M. D. S. Clock Shield T. M. D. S. Clock+ T. M. D. S. Clock K52 Miscellaneous T.M.D.S. (Transition Minimized Differential Signaling) C1~C5: DVI-I only Accessories Please check the accessories in the product package. * The monitor and the accessories can be different from the figures shown here. Monitor User’s Manual RCA Cable 15-pin D-Sub Signal Cable S-Video Cable DVI-D Signal Cable Audio Cable (PC) Speaker Refer to the manual in the speaker box for more details on speaker accessories. K7 Power Cord
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2003:09:25 13:41:58-03:00 Create Date : 2003:09:22 16:48:12+09:00 Title : EMISSION TEST REPORT Author : 최선미 Creator : Acrobat PDFMaker 5.0 for Word Producer : Acrobat Distiller 5.0 (Windows) Page Count : 32 Mod Date : 2003:09:25 13:41:58-03:00 Creation Date : 2003:09:22 16:48:12+09:00 Metadata Date : 2003:09:25 13:41:58-03:00 Has XFA : NoEXIF Metadata provided by EXIF.tools