LG Electronics USA L602I PCS GSM Phone User Manual L601i E 047 056
LG Electronics USA PCS GSM Phone L601i E 047 056
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2

271
Appendix
Next Page
Appendix
Kuten
digit
1 to 3
Kuten digit 4 Kuten digit 4 Kuten digit 4
Kuten
digit
1 to 3
Kuten
digit
1 to 3

272
Appendix
Appendix
Kuten
digit
1 to 3
Kuten digit 4 Kuten digit 4 Kuten digit 4
Kuten
digit
1 to 3
Kuten
digit
1 to 3

273
Appendix
Next Page
Appendix
Kuten
digit
1 to 3
Kuten digit 4 Kuten digit 4 Kuten digit 4
Kuten
digit
1 to 3
Kuten
digit
1 to 3

274
Appendix
Appendix
Kuten
digit
1 to 3
Kuten digit 4 Kuten digit 4 Kuten digit 4
Kuten
digit
1 to 3
Kuten
digit
1 to 3

275
Appendix
Next Page
Appendix
Kuten
digit
1 to 3
Kuten digit 4 Kuten digit 4 Kuten digit 4
Kuten
digit
1 to 3
Kuten
digit
1 to 3

276
Appendix
Appendix
Kuten
digit
1 to 3
Kuten digit 4 Kuten digit 4 Kuten digit 4
Kuten
digit
1 to 3
Kuten
digit
1 to 3

277
Appendix
Appendix
Kuten
digit
1 to 3
Kuten digit 4 Kuten digit 4 Kuten digit 4
Kuten
digit
1 to 3
Kuten
digit
1 to 3

List of city in World time
278
Appendix
Appendix
Country name City name Country name City name Country name City name
Afghanistan Kabul
Colombo
Aregentina Buenos Aires
Australia Canberra
Sydney
Austria Vienna
Bangladesh Dhaka
Brazil
Belgium
Canada
Czech
Denmark
Egypt
Finland
Rio de Janeiro
Sri Lanka
Taipei
Taiwan
Bangkok
Thailand
Azores
Brussels
Montreal
Prague
Copenhagen
Cairo
Helsinki
France Paris
Greece
Germany
Hungary
Ireland
Athens
Berlin
Budapest
Dublin
Iran Tehran
USA
UAE Abu Dhabi
UK London
Japan Tokyo
Kuwait Kuwait
Lebanon Beirut
Mexico Mexico City
Netherlands Amsterdam
New Zealand Auckland
People's Republic
of China
Beijing
Hong Kong
Philippines Manila
Portugal Lisbon
Russia Moscow
Republic of Korea Seoul
Saudi Arabia Jedda
Singapore Singapore
India
Indonesia Sweden Stockholm
New Delhi
Italy Rome
Spain Madrid
Jakarta
Venezuela
Viet Nam
Caracas
Hanoi
Anchorage
Boston
Chicago
Dallas
Denver
Detroit
Guam
Honolulu
Los Angeles
New York
Seattle
Washington D.C.

279
Appendix
Appendix
Multiaccess Combination Patterns
You can simultaneously use a voice call and packet transmission (i-mode, i-mode mail, etc.) as well as SMS with the multiaccessing
function on the FOMA phone. The available combinations of operations for the multiaccessing function are shown below:
O : Available x : Not available – : The combination is functionally not possible.
1: If you have signed up for Call Waiting Service, you can make another voice call with the current voice call put on hold.
2: If you have signed up for “Voice Mail” or “Call Forwarding Service”, and you have not yet activated either service, you can answer
another incoming call after ending the current transmission.
3: You can check the missed call after ending a call.
4: You cannot use this menu during communicating i-appli.
5: The message will be stored in i-mode center with a mark on upper of screen.
(The mark is not displayed on the top of the screen during a packet transmission connecting with a personal computer.)
6: You cannot receive message while downloading.
7: You can receive SMS after ending current transmission.
8: You cannot activate i-appli which needs data communication while transmitting by packet.
9: If i-appli runs without connecting the network, the packet transmission cannot be activated.
10: You can activate i-appli only if you call from site of i-mode.
11: You can send i-mode mail or i-appli if you compose the mail from the submenus of i-mode browser. You can insert the
displayed site or URL into the body of mail.
Video-phone
During a call
During a Video-phone call
While using i-appli
During i-mode
During a packet transmission
with PC connection
Transmission Added
Current Transmission
Voice call i-modei-appli i-mode mail
Packet transmission
SMS
Outgoing Incoming Outgoing Incoming Sending
Receiving
Send Receive Sending

280
Appendix
Appendix
Multitask Combination Patterns
You can run multiple functions simultaneously and use
them switching displays with the Multitask function.
Using Multitask
1. While running each function, N1: “Own number” function is not included.
2: If you switch i-mode/ i-appli, the play is ended, and then
is displayed.
3: “Schedule” function is not included.
4: “Custom menu”, “Infrared”.
2. Select ]C]Select from the following new
functions ]C
Call
The Phone Number entry screen appears. >P48
Mail
The Mail menu appears. >P137
i-mode
The i-mode menu appears. >P119
i-appli
The Software List screen appears. >P159
Search phonebook
The Phonebook Search screen appears. >P66
Melody
The Melody Folder List screen appears. >P176
You can confirm the functions running.
You can switch functions by selecting
the icon.
Select
DoCoMo Ichiro
DoCoMo Saburo
DoCoMo Jiro
DoCoMo Taro
Search phonebook
Phonebook
1/4
Description
Icon
Description
Icon
Setting the setting menu
Description
Icon
Voice call function running
Mail function running
i-mode function
running
Scheduler function
running
Calculator function
running
Description
Icon
Tool function running 4
Setting the sound
function
Setting the display menu
Multimedia function
running
i-appli function running
(2)Data box function
running (The player is
playing back)
Phonebook function 1
running
Setting the network/
Displaying the history
of recent calls
Own number is
displayed

281
Appendix
Appendix
Camera-mode
The Still Image Finder screen appears. >P110
Scheduler
The Monthly Schedule screen appears. >P191
Calculator
The Calculator screen appears. >P184
Own number
Own number is displayed. >P72
• A few functions are not selected depending on activating the task.
>P282
Information
• To bring up the Task Menu display from Stand-by screen,
press and hold Nfor 1 or more seconds.
• When you activate multitask function, the submenus can be
used.
• It may be a few cases that you cannot use “Search
phonebook” depending on the memory status of FOMA
handset.
Ending the task/ Going back to previous task
1. Q/P
• You can terminate the running function.
• When an application is running or i-mode is being
connected, terminate it by pressing P.

282
Appendix
Appendix
Combination of Functions
You may not be able to select some items on the Task Menu display depending on the added function. The
combinations of active functions and added functions performable from the Task Menu are as follows:
O : Available x : Not available
1: You cannot use this menu when activating the menu from phonebook. You cannot use new phonebook function.
2: You cannot use this menu when using phonebook function.
3: You cannot use this menu when activating function from Received calls / Dialed calls / Phonebook.
• While using or running the following functions, pressing Ndoes not work:
– On displaying the warning message or info message / During a voice call / video-phone call / while making / receiving a call
– During a video-phone call
– During data transmission with a personal computer connected
– While recording moving image
– While copying data / moving data / deleting all data / downloading data
– While exchanging a data via infrared
During a Voice call
A function in the Mail menu running
A function in the i-mode menu running
A function in the i-appli menu running
A function in a menu other than
the Mail/i-mode/i-appli menu
running
Own number displayed
Voice
call
Mail i-mode i-appi Phonebook
search
Task menu
item
Active function

283
Appendix
Appendix
During a Voice call
A function in the Mail menu running
A function in the i-mode menu running
A function in the i-appli menu running
A function in a menu other than
the Mail/i-mode/i-appli menu
running
Own number displayed
Melody Camera Schedule Calculator Own number
Task menu
item
Active function

284
Appendix
Appendix
Service Available with FOMA Phones
Information
• When making a collect call (106), the recipient is charged
call fee and a handling fee of ¥90 (¥94.5 including tax) for
each a call. (As of October, 2006)
• When using the Directory Assistance Service (104), you
are charged a guidance fee of ¥100 (¥105 including tax)
plus a call fee. For whom having weak eyesight or
handicapped arms, the guidance is available charge free.
For more details, dial 116 (NTT inquiry counter) from
ordinary phones. (As of October, 2006)
• When you dial 110/119/118 from the FOMA phone, you
cannot be located. Tell the staff at the police/fire station
that you are calling from a mobile phone and then notify
your phone number and a correct description of your
current location so that they can call you back to confirm.
Furthermore, remain still while talking to prevent your call
from being disconnected. Do not turn off the power
immediately after the call, but instead make sure that
your phone can receive calls for at least 10 minutes.
• You may not be connected to regional police/fire station
depending on the area from where you call. If this
happens, use payphones or ordinary phones.
• If you use “Call Forwarding Service” for the ordinary
phone and specify a mobile phone or automobile phone
(mobile phone) as the forwarding destination, callers may
hear ringing tone even when the mobile phone is busy,
out of the service area, or the power is turned off
depending on the settings of the ordinary phone/mobile
phone.
• Note that the FOMA phone is not available to 116 (NTT
inquiry counter), Dial Q2, Message Dial, and credit call
services. (You can use auto credit call to the FOMA
phone from ordinary phones or payphones.)
Available services
Collect call (Calls charged to the receiver)
Phone number
(No prefix) 106
Directory assistance for ordinary phones
and DoCoMo mobile
phones (Charges apply) (Unlisted phone
numbers cannot be given.)
(No prefix) 104
Telegrams (Charges apply)
8 a.m. to 10 p.m. (No prefix) 115
Time information (Charges apply) (No prefix) 117
Weather forecast (Charges apply) Area code + 177
Emergency calls to police (No prefix) 110
Emergency calls to fire station and ambulance
(No prefix) 119
Emergency calls for accidents at sea (No prefix) 118
Disaster messaging service (Charges apply) (No prefix) 171

285
Appendix
Appendix
Introduction of Data Link
“FOMA L602i Data Link” is the program for data such as phonebook, bookmark, contents exchange or transmission
using FOMA phone to a personal computer via connecting the FOMA USB cable (option). You can edit and save the
data using personal computer.
• LG Electronics Japan jp.wowlg.com
For details of installation, environments, operation, and limit, refer to web page or Installation guide and Help file of
Data Link program.
aOS
Windows2000, WindowsXP (Japanese version)
• PC/AT transmission operator supported these OS
aWarranty Limitation
LG Electronics Japan, Inc. shall undertake the flaw warranty of this software, and no other responsibility of a
qualification. Moreover, any problems concerning Data Link software and related data shall be solved by
responsibility and expense of an user.
Information
• While synchronizing Data link, you cannot use other functions.
• You can synchronize Data link only from Stand-by screen.
“FOMA Data Link”
<Customer Service of LG Electronics Japan Inc.>
aBusiness hours 10:00 a.m. ~ 6:00 p.m.
(Except for Saturday, Sunday and Holiday)
aPhone number 0120-813-023
Can be called from mobile phone or PHS 03-5675-7323
• Please confirm the phone number before you dial.

286
Appendix
Appendix
Troubleshooting
Problem
The FOMA phone cannot be turned on.
(Cannot be used)
Cannot operate by pressing buttons.
Cannot be charged.
appears and a busy tone sounds when
making a call.
Camera images are dark showing nothing when using the
camera/video camera, or making a video-phone call.
"All lock" is displayed on the Stand-by display.
Different ring tones sound for incoming
calls/incoming mails.
Images or melodies selected return to default.
Check point
Make sure the battery pack is attached to the FOMA
phone correctly.
Make sure the battery is fully charged.
Turn off the power once and back on, or reinstall the
battery pack.
Make sure the battery pack is attached to the phone
correctly.
Make sure that the charging is performed in a correct way.
You may be out of the service area or receiving weak
radio waves.
Check the rotation direction of the camera.
This may be because All Lock is activated.
This may be because the call/mail from a party whose ring
tone/mail ring tone is set by Utilities per mail address.
This may be because the call/mail from a party stored in a
group and set with a ring tone/mail ring tone in Group Setting.
Make sure the same UIM that was attached when you
downloaded images or melodies is inserted.
Reference
P39
P42
P39, 44
P39
P40
P31
P29, 109
P99
P65
P71
P38

287
Appendix
Next page
Appendix
aWhen using at overseas
Problem
stays displayed, and the International
Roaming Service cannot be used.
Cannot use Video-phone call/SMS/i-mode/Packet
transmission.
Cannot receive Voice call or Video-phone call.
Remains after returned from overseas.
Check point
Make sure the phone is in the international roaming
service area and is not receiving weak radio waves.
Check the “Network Services User's Guide” (Chapter
of International Service) or WORLD WING's web page
to see whether the service area or the carrier can be
used with your phone.
Change the “Network mode” to “Auto” or to the
network supporting the service.
Check the “Network Services User's Guide” (Chapter
of International Service) or WORLD WING's web page
to see whether the service area or the carrier can be
used with your phone.
Change the “3G”/“GSM/GPRS” to “Auto” or to the
network supporting the service.
Make sure “Barring All Incoming when roam” is not
set to restrict incoming calls.
Make sure “Network mode” is not set to “GSM” only.
Reference
P224
–
P97
–
P97
P207
P97

288
Appendix
Appendix
Error Messages
Message Description
Reference
Invalid UIM requested software
can't start
Cannot auto start i-appli software because of the UIM restrictions. Insert
the UIM which was inserted when the file was obtained and try again. –
Invalid UIM cannot send Cannot operate because of the UIM restrictions. Insert the UIM which
was inserted when the file was obtained and try again. –
Invalid UIM requested service not
available.
Cannot send mail because of the UIM restrictions. Insert the UIM which
was inserted when the mail was created and try again. –
Invalid UIM, incorrect display Cannot display because of the UIM restrictions. Insert the UIM which was
inserted when the mail was created and try again. –
Insert FOMA card(UIM) / Insert UIM No UIM is inserted. Insert it and try again. –
Invalid UIM requested software
can't start
Cannot start i-appli software because of the UIM restrictions. Insert the
UIM which was inserted when the file was obtained and try again. –
Could not check new message Was not able to check new message successfully. –
i-mode mail service is busy. Please
try again later (555)
The line facility has trouble or line is very busy. Try again later. –

289
Appendix
Appendix
Next Page
Message Description
Reference
Invalid PUK1 Remaining: X The entered PIN1 unblock code is wrong. Enter the correct one.
Invalid PIN1 Remaining: X The entered PIN1code is wrong. Enter the correct one.
Please check SMS Center settings The setting of the SMS center is wrong. Make the settings correctly and
try again.
SSL session cannot be established. Connection was not established to the site which is supporting SSL
communication. Try again. –
P105
P105
P102
P105
P105
Please set “To type” receiver The mail address (To-type) is not entered. Perform a transfer after
entering it.
Root certificate is not valid. The SSL certificate for that server is set to "Invalid" in the "Certificate"
setting. Change the setting to "Valid" and try again. P128
P149
URL is too long to register The URL for the site is too long, so it cannot be registered. –
URL is too long to display The URL for the site is too long, so it cannot be displayed. –
There is data that can't register to
UIM
When you copy the entry of phonebook from handset to UIM, the
character may be entered over the limit or entered the item that cannot
be registered.
Invalid PIN1 (PIN2) Remaning:X If you enter wrong PIN1/ PIN2 code 3 times in a row, PIN is locked. To
unlock it, enter PIN unlock code.
Invalid PIN1 (PIN2) Remaning:X If you enter wrong PIN1/ PIN2 code 3 times in a row, PIN is locked. To
unlock it, enter PIN unlock code.

290
Appendix
Appendix
Message Description
Reference
No URL history URL history is not recorded. –
There is no empty memory. Since the entered memory number was already in use, the phonebook
entry cannot be saved. Enter a different memory number. –
9K size cannot be used "Multi shot" or "Frame shot" cannot be set because "File size restriction"
is set to "9KB". When you want to set "Multi shot" or "Frame shot", set
"File size restriction" to "No restriction".
Invalid URL The URL is not entered correctly. Enter it correctly and try again. –
P113
Please input address No address is entered. Perform a transmission after entering an address. P149
Upgrade was terminated. An error occurred, and upgrade was terminated. –
Cannot start application An error occurred so the i-mode function could not be started. –
Address is not valid (451) SMS was not able to be sent since the address is wrong. Perform the
operation after entering a correct address. –
Incorrect password P104
Can't copy some data Continue? –
The Terminal Security Code is wrong. Enter the correct Terminal Security
Code.
The data which cannot be copied is included. If you want to copy in this
situation, select “Yes”.
–
Not moved An error occurred so the file could not be moved. –
error An error occurred, so the operation of i-appli has been terminated. –
–
No empty memory An error occurred so you cannot create the animation.
Cannot rename Error in renaming An error occured so you cannot change the name.

291
Appendix
Next Page
Appendix
Message Description
Reference
Same URL already stored. Overwrite? The same URL is already registered. Select "Yes" to overwrite. –
Same address is entered. Send? The same address is entered. Select "Yes" to delete and send. –
Exist same file The same file name exists. Change the file name to save. –
Cannot save image An error occurred, so the image cannot be saved. –
No response (408) No response from the site or the Internet web page, so could not
connect. Try again. –
–
–
P129, 155
P112
–
Exist same file The same folder name exists. Change the folder name.
Cannot add same desktop icon You cannot copy the file in the same folder. Select the other folder, and
then I[Add].
All lock All lock is set. After releasing the lock, try it again.
MessageF (free) service unavailable while
abroad. Please make sure the Center
Inquiry functions on your mobile phone,
does not check for MessageF, when
making inquires to the i-mode center(556)
You cannot request MessageF overseas. Exclude "MessageF" from
"Request i-mode" items to be used overseas.
Not available if size is restricted You cannot set "Setting saved quality" if you set "File size restriction" to
other than "No restriction". Before you set it, set "File size restriction" to
"No restriction".
Error in image. Does not work
correctly
The memory space is not enough or an error occurred, so it does not run
correctly.
P99

292
Appendix
Appendix
Message Description
Reference
Screen memos is full. The screen memos are saved up to the maximum. By pressing "Yes", you
can delete unnecessary screen memos. –
Screen memos is full. Select item to
delete
The screen memos are saved up to the maximum so that it cannot save
any more. Select "Yes" and delete unnecessary screen memos. P122
Unable to view file. Access to URL
is limited (491)
The maximum number of accessible times exceeded, so could not be
displayed. –
Failed to launch. Failed to start software because of an error. –
Failed to load screen memo Failed to read the screen memo so that it cannot be displayed. –
No screen memos No screen memos are saved. –
Cannot add screen memo An error occurred, so the screen memo could not be saved. –
Out of service area –
Terminal and UIM ID will be sent This is displayed when IP (Information Service Provider) needs to identify
a customer with "Serial number of your mobile phone/UIM". "Serial
number of your mobile phone/UIM" is sent to IP over the Internet, so it
could be perceived by third parties. However, your phone number,
address, age and gender are not notified to the IP (Information Service
Provider) or others by this operation. Select "Yes" to connect.
–
Already downloaded by different
UIM. Overwrite?
Already the same i-appli downloaded with a different UIM exists. Select
"Yes" to overwrite. –
You are either out of the service area or where radio waves are not
received. Move to a place where is displayed.

293
Appendix
Next Page
Appendix
Message Description
Reference
This card cannot be recognized The UIM cannot be recognized, or an invalid UIM is inserted. Either
reinsert the UIM or insert a valid UIM and try the operation again. P37
Cannot zoom in this image size Since the "Size" is set to "1280x1024", zoom does not work. Set the
"Size" to "640x480" or smaller to use the zoom. P111
Certificate is rejected (tampered) Could not connect since an altered SSL certificate was received. –
This site is not certified. Do you
connect?
The SSL certificate which is not supported has been received. Select
"Yes" to connect. –
This certificate has expired. Do you
connect?
You have connected to a site supporting SSL communication without
your clock being set. Please perform "set time". –
An expired or premature SSL certificate is received. Select "Yes" to
connect. –
Root certificate has expired. Do you
connect?
The SSL certificate in the FOMA phone has expired. Select "Yes" to
connect. –
You have connected to a site supporting SSL communication without
your clock being set. Please perform "Set time". P95
A request to send a client certificate occurred while connecting to a site
supporting SSL communication. Select "Yes" to connect. –
When the CN of SSL certificate does not match, this error message will
be displayed. Select "Yes" to connect. –
This certificate is not valid for this
URL Do you connect?

294
Appendix
Appendix
Message Description
Reference
Some media is used only with-in
your phone.
Since the file protected with copyright protection technology is included, it
cannot be transmitted. –
–
Terminal and UIM ID will be sent. This is displayed at download for an IP (Information Service Provider) to
identify a customer and judge whether it can be used with the mobile phone.
"Serial number of your mobile phone/UIM" is sent to IP over the Internet, so it
could be perceived by third parties. However, your phone number, address,
age and gender are not notified to the IP (Information Service Provider) or
others by this operation. Select "Yes" to connect.
The registered data (such as phonebook, bookmark or schedule) saved in
your mobile phone is used at download.
This software will use saved data. –
This data cannot be set Cannot be set since it is protected with copyright protection technology. –
This data cannot be sent Cannot be sent since it is protected with copyright protection technology. –
–
This data cannot be edited
Cannot be edited since it is protected with copyright protection technology.
The data may not be replayed Since downloaded data is not valid, it may not be able to be played. –
This data cannot be moved
The file cannot be moved since it is protected with copyright protection technology.
–
This data cannot be copied
The file cannot be copied since it is protected with copyright protection technology.
–
–
The data cannot be saved. The data from a site cannot be saved since the data is invalid.

295
Appendix
Next Page
Appendix
Message Description
Reference
Please set the clock to obtain data Cannot acquire this data because the clock is not set. Perform this
operation after setting the clock. P95
Failed copy.
Cannot add folder
Failed to copy the phone number and the mail address since an error
occurred in the data of the phone number and the mail address while
copying the phonebook.
The maximum number of folders that can be created has been reached,
so cannot create any more. Delete unnecessary folders and try again.
–
–
Too many items are protected The maximum number of files that can be protected has been reached so
cannot protect any more. Release protection for other files and try again. –
Service is not provided
Connection failed
The i-mode service is not subscribed to, so the service cannot be used.
Please subscribe to the service.
Cannot send since you are in an area where SMS service is not provided.
–
–
This data can no longer be replayed
Delete?
An i-motion movie with playable frequency reached is selected.
Select "Yes" to delete it. –
Unable to connect to server. Connection to the server failed for some reason. Try again –
Not supported image size You cannot insert “Frame” since the sizes are “1280X1024”, “640X480”
and “Phonebook”. –
–
–
This motion is not complete Cannot save the data since the data was not completely acquired. –
The data cannot be saved.
Download?
You cannot save the data even though you obtain it because the data
cannot be saved. Select "Yes" to obtain it.
This file cannot be set as a
wallpaper
This file cannot be set as a wallpaper.

296
Appendix
Appendix
Message Description
Reference
Replay period has expired Delete? An i-motion movie with expired replay period is selected. Select "Yes" to
delete it. –
Replay period has not yet started You are selecting an i-motion movie whose playable date has not yet
come. Check the playable date. –
Cannot obtain in error to play back There is an error in the playback control in i-motion, so cannot be
acquired. –
Unable to obtain data due to replay
restriction data error
There is an error in the playback restriction data for i-motion, so cannot
be acquired. –
Can't play An error occurred, so cannot be played back. –
Could not play An error occurred, so could not be played back. –
Size of this page is not supported
Size of this page is not supported
The maximum size of data exceeded, so could not be downloaded
successfully. –
Unable to download. Data exceeds
maximum size. (452)
The size of data receiving exceeded the maximum size, so could not be
received. –
URL address changed. (301) The site or Internet web page is automatically transferring the URL or the
URL has been changed. If this is registered in the bookmark or Home,
reregister it.
–
Connection failed (XXX) Could not connect to the site for some reasons. Try again.
A 3-digit number is displayed in (XXX).
File with copyright is deleted A file prohibited to be output from the FOMA phone is attached to the
i-mode mail you are sending.
–
–
Could not delete Failed to delete because an error occurred. –
Page is not found. (404) The site was not found. The site may not exist. –

297
Appendix
Next Page
Appendix
Message Description
Reference
No content is available. (204) There is no data to display at the connected site. –
No requested software There was no i-appli to start from the site or mail. –
No requested software. End? There was no i-appli to start from the site or mail. –
Requested software unavailable Could not start an i-appli from the site or mail. –
Unable to retrieve the requested
URL (504)
Could not connect to the specified site for some reason. Try again. –
No Requested File (492) The selected file does not exist in the FOMA phone. –
cannot register anymore
Please wait
All software programs that can be auto started have already been set up,
so you cannot set up any more.
The line facility has trouble or the line is very busy. Try again later.
–
–
Cannot receive message Failed to obtain mail. –
No messages The received mail has not been saved. –
No Certificates SSL certificate has not been saved.
Inbox message is full Received mail is saved up to the maximum number or the memory space
for received mails is already full, and no more can be saved.
Delete unnecessary received mails.
–
P141
Run selected software? The URL to activate i-appi is activated. If you activate it, select “Yes”. –
Low battery The battery level is too low to activate the function. After charging it, try
again. P40

298
Appendix
Appendix
Message Description
Reference
Streaming play not supported You cannot play the file because i-motion of streaming type is not
supported. –
Invalid data. Connection cannot be
established (400)
Could not access i-mode for some reasons.
A 3-digit number is displayed in (XXX). –
Schedule is full The schedule is set up to maximum, and no more can be set. Delete
unnecessary schedule.
P192, 193
Connection interrupted The line is busy or a transmission error occurred, so connection was
interrupted. Try again later. –
Connection failed An error occurred during a download. Select “Retry” to reconnect.
Radio waves are weak, so cannot connect. Move to a place where radio
waves are strong enough and try again.
–
Connection failed
Connection failed (562)
SSL session failed.
Could not connect because of network trouble. Wait a while and try
again.
Cannot connect because of the error in the server's authentication.
–
Time out Could not connect within the time set at “Connection Timeout”. Change
the setting or try the operation again. P129
Network unavailable You are either out of the service area or where radio waves are not
received; so you cannot set the network service because the network is
not connected. Move to a place where radio waves can be reached.
–
Sent message is full Sent mails was saved up to the maximum number, and no more mail can
be saved. Delete unnecessary saved mail. P146

299
Appendix
Next Page
Appendix
Message Description
Reference
Sending error A sending error occurred. –
Server is full (551) The recipient's mail is full. –
Application(s) exist. Folder can't be
deleted.
Software is saved in the folder so the folder cannot be deleted. Delete the
software and try again. P162
The software contains an error. There is an error in the software, so the folder download and version
upgrade cannot be performed. –
This software contains an error.
Unable to download.
There is an error in the software, so download and version upgrade
cannot be performed. –
Memory full. Overwrite existing
software?
Memory for storing software is not enough, so no more can be saved.
Delete unnecessary software. P162
Installation cancelled An error occurred, so downloading was interrupted.
No messages Sent mail has not been saved. –
Address is not valid (451) Could not send the message correctly. Check the address and send
again. –
Software updated The S/W is not updated so you cannot activate the function. –
This software is not supported by
this phone.
The software to download or to update the version is not compatible with
this FOMA phone. –
Already downloaded. The same version of the software has already been downloaded. –
i-mode mail service is busy. Please
try again later(553)
The line is very busy. Try again later. –
–
Transmission failed The mail could not be sent correctly.
A 3-digit number is displayed in (XXX). –
Transmission failed (XXX)

300
Appendix
Appendix
Message Description
Reference
Invalid speed dial No phonebook entry with a memory number corresponding to the
number entered on the Phonebook Entry display has been registered. P64
Security code is wrong The Terminal Security Code is wrong. Enter the correct Terminal Security
Code. P104
Could not make a phone call since the connection to the network failed.
Try making the call again.
The i-mode inquiry was suspended for some reason. Try the operation
again. –
Connection interrupted. Retry? An error occurred during Infrared communication, so transmission has
been suspended. Select "Yes" to retry the connection. –
Interrupted An error occurred during Infrared communication, so Infrared reception
has been suspended. –
The battery level is low. Perform the operation after charging the battery. P40
Interrupted
Battery low
–
Not allowed
Call rejected P90
P90
P90
P182
Begin data exchange? The message to activate infrared function is displayed. Select “Yes” to
activate this function.
Rejected a call when incoming call from the other party not registered in
phonebook. To receive a call, set “Memory reject call” to “Permit”.
Rejected a call from the other party registered “Reject on list”.
Rejected a call when “Reject all calls” sets to “Disconnect call”.
This data cannot be sent The file cannot be sent from the FOMA phone, so you cannot send a mail
attaching the file. –

301
Appendix
Next Page
Appendix
Message Description
Reference
The remaining battery level is getting low. Perform the operation after
charging the battery. P40
No attachable files have been saved. –
The file was deleted because there was an attachment with UIM restrictions. –
Attached file size is over.
The file size of the message you attempt to send exceeds the maximum size.
P151
Data is stored to the maximum, so cannot save any more. Delete
unnecessary data.
P141,
162, 168,
169, 175
An invalid data has been downloaded. –
Could not obtain because of invalid data. –
Data full
Invalid data
Receiving canceled
Low battery Cannot start camera-
mode
Cannot attach more than file
Delete attached file
Failed to copy the phone number The phone number failed to be copied because there was an error in the
data of the phone number while it was copied to the phonebook. –
Registration num is over Can't copy The phone book memory in the UIM is full, so the phone book cannot be
copied. Try again after deleting unnecessary phonebook. P68
Memory is full Since the memory of the selected storage place is full, the phone book
cannot be stored. Perform the operation after deleting unnecessary
phonebook entries.
P68
Delete end the phone number is too
long
The number of digits of the phone number entered in the address of SMS
message by looking up the phonebook exceeds the maximum number of
characters that can be entered.
–
Low battery Exit camera-mode Because the battery level is low, the camera is terminated. Try again after
charging the battery. P40

302
Appendix
Appendix
Message Description
Reference
Cancel and discard work in
progress?
You are about to terminate the edited content without saving.
Select "Yes" to terminate the content without saving. –
Enter name. The name of the phonebook is not entered. Save after entering a name. P64
Too much data was entered Too many characters have been entered in the text box or URL, so it
cannot be sent. Reduce the number of characters to send. –
Registration is in progress (554) Cannot operate because the user is being registered. Wait a while and try
again. –
Not registered An error occurred so the data cannot be registered.
P104
P184
–
Input error (205) The data (such as text) entered and transmitted from a site are wrong.
Check the entered contents and try again.
Authentication type is not
supported(401)
Cannot connect because the authentication type is not supported.
–
–
–
Invalid An error occurred so you cannot register it.
Auth. password wrong. Retry? The authentication password entered is incorrect. Select “Yes” to
continue.
–
Enter correct Network Security
Code
The Network Security Code is wrong. Enter the correct Network Security
Code.
No network found You cannot set the network service because the network is not
connected. Please wait a while and try again.
Authentication canceled (XXX) This will be displayed when “Cancel” is selected from the authentication
screen. A 3-digit number is displayed in (XXX).
No response from network. Activate
manually?
Cannot search for the network automatically.To search manually, select "Yes".
P96

303
Appendix
Next Page
Appendix
Message Description
Reference
The entered password is wrong. Enter the correct password.
Invalid File Cannot operate since the file is corrupted. –
Invalid File (493)
File error
Password is not correct. (401)
Password is not correct.
Because the file has an error, it cannot be saved. –
Invalid data Because the file is invalid, cannot be displayed/played/saved. –
The file is not supported. A file that cannot be set is selected. –
File size is too big The file is too big to attach to mail. –
Image with digital right is included Since the file protected with copyright protection technology is included in
the folder, animation cannot be created. Select a file with no restrictions. –
File is deleted This is displayed when incoming mail with a file attached is forwarded.
Perform attaching operation in order to attach the file. P150
Can't attach file The file cannot be attached since it will exceed the size of mail that can
be sent. –
Can't create folder. Folder already
exists.
The folder cannot be created since there is already a folder with the same
name. Change the name. –
Select ON for caller ID notification Cannot notify the phone number. After setting on in caller ID notification,
try again. P202
–
Enter file name File name has not been entered. After entering file name, try again. P169, 170,
174
Cannot read file Unknown file
format
This file format is not supported in this FOMA phone. –

304
Appendix
Appendix
Message Description
Reference
Cannot delete folder Mail is saved in the folder, so the folder cannot be deleted. Delete the
folder after deleting all the mail in the folder.
P141
Cannot create folder The maximum number of folders are created, so cannot create any more.
Delete unnecessary folders and try again.
P141,161,
168
Incorrect folder name A character invalid for a folder name is included. –
Can't create folder any more An error occurred so the folder was not created. –
Unknown browser error An unknown error occurred. –
Invalid content Invalid page, so cannot be displayed. –
Total size is too big Total page size exceeded the maximum size, so it cannot be received
successfully. –
Your data will be lost. Quit? You are about to terminate without saving the edited contents such as
phonebook entries by pressing Aor Q. Select "Yes" to terminate
without saving the contents.
–
Home page not set. Home is not set. Perform the operation after setting Home. P128
Cancel editing? You are about to terminate without saving the edited contents. If you do
not want to save it, select “Yes”. To continue editing, select “No”.
Bookmark is full. Select item to
delete
The maximum number of data items are bookmarked, so cannot
bookmark any more. Delete unnecessary bookmarks by selecting “Yes”. P121
Cannot add bookmark An error occurred, so could not bookmark. –
No bookmarks Bookmark not registered. Register bookmark beforehand. P130
Can't rename folder. Folder already
exists.
The folder cannot be created since there is already a folder with the same
name. Change the name. –

305
Appendix
Next Page
Appendix
Message Description
Reference
Save failed. An error occurred, so could not save. –
No messages No unsent mail messages saved. –
No save area Cannot save because there is no room available in the storage area.
Delete unnecessary files. –
Message too long Cannot enter Cannot enter because the text size exceeded 70 full-pitch characters or
160 half-pitch characters when an SMS message was transmitted. –
Home page disable The URL registered in Home is not entered correctly. Perform the
operation after entering it correctly. P128
Message too long
The mail size exceeds 5,000 full-pitch characters if a signature is pasted, so
it cannot be pasted. Make the text of the message shorter or delete attached
data to reduce the size down to less than 5,000 full-pitch characters.
P156
No space to attach signature
The mail size exceeds 5,000 full-pitch characters if a signature is pasted, so
it cannot be pasted. Make the text of the message shorter or delete attached
data to reduce the size down to less than 5,000 full-pitch characters.
P156
Message too long End of message
will be deleted
When received mail is replied to with quote or forwarded, the message will exceed
5,000 full-pitch characters, so the last part of the message will be truncated.
–
Cannot edit message The text cannot be entered because data equivalent to the size of 5,000
full-pitch characters is attached to the mail. –
Manner mode Play with sound? The FOMA phone is set to manner mode. When you play the streaming
file with sound, select “Yes”.
Play with sound? The FOMA phone is set to manner mode. Select "Yes" to play sound of
moving images or a melody.
Outbox or Unsent message is full Cannot save the mail because the unsent message is full. Delete the
unnecessary unsent mail. P148

306
Appendix
Appendix
Message Description
Reference
Nuisance call barring service denied
Failed to copy mail address
The Nuisance call barring service is not subscribed to so it cannot be set.
In order to use this feature, please subscribe to the Nuisance call barring
service.
Failed to copy the mail address because an error occurred in the data of
the mail address during the copy operation to the phonebook.
P202
–
Please make sure "Receive option"
in "Mail Settings" is turned ON
Message data is broken
The Receive Option setting is set to "OFF". Change the setting to "ON"
and try again.
An error occurred so the mail cannot be displayed or created.
P154
–
Empty message cannot be saved Cannot be saved because nothing is entered to address/subject/text field
and no file is attached to the message. P149
Invalid data. Data size is not
supported.
There is an error in the received data, so it cannot be displayed. The
received data will be destroyed. A 3-digit number is displayed in (XXX). –
There is no MessageF saved.No messages F –
There is no MessageR saved.No messages R –
10 files limit for message
Folder is full
The maximum number of files attachable to mail is exceeded. The
maximum number of files that can be attached to mail is 10.
Inbox is full, so no new message can be received. Delete unnecessary
received mails.
The message data is corrupted and cannot be displayed.Message data is broken
P150
P141
–
There's empty input. Input required
There are items not entered. Perform the operation after entering these items.
–
Invalid data. Data size is not
supported. (XXX)

307
Appendix
Next Page
Appendix
Message Description
Reference
Memory full Because the memory of the FOMA phone is full, the data received by
Infrared communication or moving images cannot be saved. Perform the
operation after deleting unnecessary data.
Because the memory is full, the shot still images cannot be saved.
Because the memory is full, the edited still images cannot be saved.
P68,121,
168, 169,
175
–
–
–
Because there is not enough memory, each function cannot be started.
Not enough memory Can't save
Not enough memory –
Because there is not enough memory, no still images can be taken.
Because the number of characters transmittable is exceeded, the end of
text will be truncated. Select "Yes" to send.
Exceeds limit. Unable to paste all
letters. Paste?
–
Because the maximum number of characters is exceeded, part of the text
could not be pasted. Select "Yes" to paste the portion that can be pasted.
Exceeds limit. Unable to paste.
–
Because the maximum number of characters is exceeded, the text
cannot be pasted. Perform the operation after deleting unnecessary text
by pressing Q.
Not enough memory Please delete
some files
P168, 169,
175
The memory is full. After deleting the unnecessary files, try again.